kbuild: replace $(srctree)/$(src) with $(src) in Makefiles
Subsystems (69)
v2 cover kbuild: replace $(srctree)/$(src) with $(src) in Makefiles
This makes upstream/downstream Makefiles look consistent.
Masahiro Yamada (4):
arch: use $(obj)/ instead of $(src)/ for preprocessed linker scripts
kbuild: do not add $(srctree) or $(objtree) to header search paths
kbuild: use $(obj)/ instead of $(src)/ for common pattern rules
kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Documentation/Makefile | 8 +++--- Documentation/devicetree/bindings/Makefile | 6 ++-- Documentation/kbuild/makefiles.rst | 12 ++++---- Makefile | 7 +++++ arch/arc/boot/dts/Makefile | 3 +- arch/arm/Kbuild | 2 +- arch/arm/boot/Makefile | 3 +- arch/arm/mach-s3c/Makefile | 2 +- arch/arm/plat-orion/Makefile | 2 +- arch/arm/tools/Makefile | 2 +- arch/arm64/kernel/vdso/Makefile | 2 +- arch/arm64/kernel/vdso32/Makefile | 2 +- arch/arm64/kvm/Makefile | 4 +-- arch/arm64/kvm/hyp/Makefile | 2 +- arch/csky/boot/dts/Makefile | 4 +-- arch/csky/kernel/vdso/Makefile | 4 +-- arch/loongarch/kvm/Makefile | 2 +- arch/loongarch/vdso/Makefile | 2 +- arch/mips/kernel/syscalls/Makefile | 2 +- arch/mips/vdso/Makefile | 4 +-- arch/nios2/boot/dts/Makefile | 3 +- arch/parisc/kernel/vdso32/Makefile | 4 +-- arch/parisc/kernel/vdso64/Makefile | 4 +-- arch/powerpc/boot/Makefile | 6 ++-- arch/powerpc/boot/dts/Makefile | 3 +- arch/powerpc/boot/dts/fsl/Makefile | 3 +- arch/powerpc/kernel/vdso/Makefile | 8 +++--- arch/riscv/kernel/compat_vdso/Makefile | 2 +- arch/riscv/kernel/vdso/Makefile | 2 +- arch/riscv/kvm/Makefile | 2 +- arch/s390/kernel/syscalls/Makefile | 4 +-- arch/s390/kernel/vdso32/Makefile | 4 +-- arch/s390/kernel/vdso64/Makefile | 4 +-- arch/sh/kernel/vsyscall/Makefile | 4 +-- arch/sparc/vdso/Makefile | 2 +- arch/um/kernel/Makefile | 2 +- arch/x86/boot/Makefile | 2 +- arch/x86/entry/vdso/Makefile | 2 +- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/cpu/Makefile | 2 +- arch/x86/mm/Makefile | 2 +- arch/x86/um/vdso/Makefile | 2 +- arch/xtensa/boot/dts/Makefile | 3 +- certs/Makefile | 4 +-- drivers/Makefile | 5 ---- drivers/crypto/intel/qat/qat_420xx/Makefile | 2 +- drivers/crypto/intel/qat/qat_4xxx/Makefile | 2 +- drivers/crypto/intel/qat/qat_c3xxx/Makefile | 2 +- drivers/crypto/intel/qat/qat_c3xxxvf/Makefile | 2 +- drivers/crypto/intel/qat/qat_c62x/Makefile | 2 +- drivers/crypto/intel/qat/qat_c62xvf/Makefile | 2 +- .../crypto/intel/qat/qat_dh895xcc/Makefile | 2 +- .../crypto/intel/qat/qat_dh895xccvf/Makefile | 2 +- drivers/gpu/drm/amd/amdgpu/Makefile | 2 +- drivers/gpu/drm/arm/display/komeda/Makefile | 4 +-- drivers/gpu/drm/i915/Makefile | 4 +-- drivers/gpu/drm/imagination/Makefile | 2 +- drivers/gpu/drm/msm/Makefile | 8 +++--- drivers/gpu/drm/nouveau/Kbuild | 10 +++---- drivers/gpu/drm/xe/Makefile | 10 +++---- drivers/hid/amd-sfh-hid/Makefile | 2 +- drivers/hid/intel-ish-hid/Makefile | 2 +- drivers/md/dm-vdo/Makefile | 2 +- .../net/ethernet/aquantia/atlantic/Makefile | 2 +- drivers/net/ethernet/chelsio/libcxgb/Makefile | 2 +- drivers/net/ethernet/fungible/funeth/Makefile | 2 +- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 +- .../broadcom/brcm80211/brcmfmac/Makefile | 4 +-- .../broadcom/brcm80211/brcmfmac/bca/Makefile | 6 ++-- .../broadcom/brcm80211/brcmfmac/cyw/Makefile | 6 ++-- .../broadcom/brcm80211/brcmfmac/wcc/Makefile | 6 ++-- .../broadcom/brcm80211/brcmsmac/Makefile | 6 ++-- .../broadcom/brcm80211/brcmutil/Makefile | 2 +- .../net/wireless/intel/iwlwifi/dvm/Makefile | 2 +- .../net/wireless/intel/iwlwifi/mei/Makefile | 2 +- .../net/wireless/intel/iwlwifi/mvm/Makefile | 2 +- .../net/wireless/intel/iwlwifi/tests/Makefile | 2 +- .../wireless/realtek/rtl818x/rtl8180/Makefile | 2 +- .../wireless/realtek/rtl818x/rtl8187/Makefile | 2 +- drivers/scsi/aic7xxx/Makefile | 12 ++++---- drivers/staging/rtl8723bs/Makefile | 2 +- fs/iomap/Makefile | 2 +- fs/unicode/Makefile | 14 +++++----- fs/xfs/Makefile | 4 +-- init/Makefile | 2 +- lib/Makefile | 6 ++-- lib/raid6/Makefile | 2 +- net/wireless/Makefile | 2 +- rust/Makefile | 6 ++-- samples/bpf/Makefile | 2 +- samples/hid/Makefile | 2 +- scripts/Kbuild.include | 3 +- scripts/Makefile.asm-generic | 6 ++-- scripts/Makefile.build | 28 +++++++++---------- scripts/Makefile.clean | 2 +- scripts/Makefile.host | 4 +-- scripts/Makefile.lib | 10 +++---- scripts/Makefile.modpost | 2 +- scripts/dtc/Makefile | 6 ++-- scripts/gdb/linux/Makefile | 2 +- scripts/genksyms/Makefile | 4 +-- scripts/kconfig/Makefile | 8 +++--- security/tomoyo/Makefile | 2 +- usr/Makefile | 2 +- usr/include/Makefile | 2 +- 105 files changed, 198 insertions(+), 207 deletions(-)
Signature · 1 line
2.40.1
PATCH v2 1/4 arch: use $(obj)/ instead of $(src)/ for preprocessed linker scripts
These are generated files. Prefix them with $(obj)/ instead of $(src)/.
---
(no changes since v1)
arch/arm64/kernel/vdso32/Makefile | 2 +- arch/csky/kernel/vdso/Makefile | 2 +- arch/parisc/kernel/vdso32/Makefile | 2 +- arch/parisc/kernel/vdso64/Makefile | 2 +- arch/powerpc/kernel/vdso/Makefile | 4 ++-- arch/s390/kernel/vdso32/Makefile | 2 +- arch/s390/kernel/vdso64/Makefile | 2 +- arch/sh/kernel/vsyscall/Makefile | 4 ++-- 8 files changed, 10 insertions(+), 10 deletions(-)
arch/arm64/kernel/vdso32/Makefile +1 -1
@@ -136,7 +136,7 @@ $(obj)/vdso32.so.dbg: $(obj)/vdso.so.raw $(obj)/$(munge) FORCE $(call if_changed,vdsomunge) # Link rule for the .so file, .lds has to be first -$(obj)/vdso.so.raw: $(src)/vdso.lds $(obj-vdso) FORCE +$(obj)/vdso.so.raw: $(obj)/vdso.lds $(obj-vdso) FORCE $(call if_changed,vdsold_and_vdso_check) # Compilation rules for the vDSO sources
arch/csky/kernel/vdso/Makefile +1 -1
@@ -31,7 +31,7 @@ KCOV_INSTRUMENT := n $(obj)/vdso.o: $(obj)/vdso.so SYSCFLAGS_vdso.so.dbg = $(c_flags) -$(obj)/vdso.so.dbg: $(src)/vdso.lds $(obj-vdso) FORCE +$(obj)/vdso.so.dbg: $(obj)/vdso.lds $(obj-vdso) FORCE $(call if_changed,vdsold) SYSCFLAGS_vdso.so.dbg = -shared -s -Wl,-soname=linux-vdso.so.1 \ -Wl,--build-id=sha1 -Wl,--hash-style=both
arch/parisc/kernel/vdso32/Makefile +1 -1
@@ -26,7 +26,7 @@ $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so FORCE # Force dependency (incbin is bad) # link rule for the .so file, .lds has to be first -$(obj)/vdso32.so: $(src)/vdso32.lds $(obj-vdso32) $(VDSO_LIBGCC) FORCE +$(obj)/vdso32.so: $(obj)/vdso32.lds $(obj-vdso32) $(VDSO_LIBGCC) FORCE $(call if_changed,vdso32ld) # assembly rules for the .S files
arch/parisc/kernel/vdso64/Makefile +1 -1
@@ -26,7 +26,7 @@ $(obj)/vdso64_wrapper.o : $(obj)/vdso64.so FORCE # Force dependency (incbin is bad) # link rule for the .so file, .lds has to be first -$(obj)/vdso64.so: $(src)/vdso64.lds $(obj-vdso64) $(VDSO_LIBGCC) FORCE +$(obj)/vdso64.so: $(obj)/vdso64.lds $(obj-vdso64) $(VDSO_LIBGCC) FORCE $(call if_changed,vdso64ld) # assembly rules for the .S files
arch/powerpc/kernel/vdso/Makefile +2 -2
@@ -74,9 +74,9 @@ targets += vdso64.lds CPPFLAGS_vdso64.lds += -P -C # link rule for the .so file, .lds has to be first -$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) $(obj)/vgettimeofday-32.o FORCE +$(obj)/vdso32.so.dbg: $(obj)/vdso32.lds $(obj-vdso32) $(obj)/vgettimeofday-32.o FORCE $(call if_changed,vdso32ld_and_check) -$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) $(obj)/vgettimeofday-64.o FORCE +$(obj)/vdso64.so.dbg: $(obj)/vdso64.lds $(obj-vdso64) $(obj)/vgettimeofday-64.o FORCE $(call if_changed,vdso64ld_and_check) # assembly rules for the .S files
arch/s390/kernel/vdso32/Makefile +1 -1
@@ -44,7 +44,7 @@ $(obj)/vdso32_wrapper.o : $(obj)/vdso32.so quiet_cmd_vdso_and_check = VDSO $@ cmd_vdso_and_check = $(cmd_ld); $(cmd_vdso_check) -$(obj)/vdso32.so.dbg: $(src)/vdso32.lds $(obj-vdso32) FORCE +$(obj)/vdso32.so.dbg: $(obj)/vdso32.lds $(obj-vdso32) FORCE $(call if_changed,vdso_and_check) # strip rule for the .so file
arch/s390/kernel/vdso64/Makefile +1 -1
@@ -50,7 +50,7 @@ quiet_cmd_vdso_and_check = VDSO $@ cmd_vdso_and_check = $(cmd_ld); $(cmd_vdso_check) # link rule for the .so file, .lds has to be first -$(obj)/vdso64.so.dbg: $(src)/vdso64.lds $(obj-vdso64) $(obj-cvdso64) FORCE +$(obj)/vdso64.so.dbg: $(obj)/vdso64.lds $(obj-vdso64) $(obj-cvdso64) FORCE $(call if_changed,vdso_and_check) # strip rule for the .so file
arch/sh/kernel/vsyscall/Makefile +2 -2
@@ -19,14 +19,14 @@ vsyscall-flags = -shared -s -Wl,-soname=linux-gate.so.1 -Wl,--hash-style=sysv SYSCFLAGS_vsyscall-trapa.so = $(vsyscall-flags) $(obj)/vsyscall-trapa.so: \ -$(obj)/vsyscall-%.so: $(src)/vsyscall.lds $(obj)/vsyscall-%.o FORCE +$(obj)/vsyscall-%.so: $(obj)/vsyscall.lds $(obj)/vsyscall-%.o FORCE $(call if_changed,syscall) # We also create a special relocatable object that should mirror the symbol # table and layout of the linked DSO. With ld -R we can then refer to # these symbols in the kernel code rather than hand-coded addresses. SYSCFLAGS_vsyscall-dummy.o = -r -$(obj)/vsyscall-dummy.o: $(src)/vsyscall.lds \ +$(obj)/vsyscall-dummy.o: $(obj)/vsyscall.lds \ $(obj)/vsyscall-trapa.o $(obj)/vsyscall-note.o FORCE $(call if_changed,syscall)
Signature · 1 line
2.40.1
PATCH v2 2/4 kbuild: do not add $(srctree) or $(objtree) to header search paths
In reply to Masahiro Yamadascripts/Makefile.lib is included not only from scripts/Makefile.build but also from scripts/Makefile.{vmlinux,modfinal} for building generated C files.
In scripts/Makefile.{vmlinux,modfinal}, $(obj) and $(src) are empty.
Therefore, the header include paths:
-I $(srctree)/$(src) -I $(objtree)/$(obj)
... become meaningless code:
-I $(srctree)/ -I $(objtree)/
Add these paths only when 'obj' and 'src' are defined.
---
Changes in v2:
- New patch to address the build error reported by 0day bot
scripts/Makefile.lib | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
scripts/Makefile.lib +3 -3
@@ -213,9 +213,9 @@ endif # $(objtree)/$(obj) for including generated headers from checkin source files ifeq ($(KBUILD_EXTMOD),) ifdef building_out_of_srctree -_c_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj) -_a_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj) -_cpp_flags += -I $(srctree)/$(src) -I $(objtree)/$(obj) +_c_flags += $(addprefix -I $(srctree)/,$(src)) $(addprefix -I $(objtree)/,$(obj)) +_a_flags += $(addprefix -I $(srctree)/,$(src)) $(addprefix -I $(objtree)/,$(obj)) +_cpp_flags += $(addprefix -I $(srctree)/,$(src)) $(addprefix -I $(objtree)/,$(obj)) endif endif
Signature · 1 line
2.40.1
Re: [PATCH v2 2/4] kbuild: do not add $(srctree) or $(objtree) to header search paths
Quoted 16 lines · Masahiro Yamada
scripts/Makefile.libis included not only fromscripts/Makefile.buildbut also fromscripts/Makefile.{vmlinux,modfinal}for building generated C files.In
scripts/Makefile.{vmlinux,modfinal}, $(obj) and $(src) are empty.Therefore, the header include paths:
-I $(srctree)/$(src) -I $(objtree)/$(obj)... become meaningless code:
-I $(srctree)/ -I $(objtree)/Add these paths only when 'obj' and 'src' are defined.
Quoted 7 lines
Reported-by kernel test robot <[email protected]>Signed-off-by Masahiro Yamada <[email protected]>---
Changes in v2:
- New patch to address the build error reported by 0day bot
PATCH v2 3/4 kbuild: use $(obj)/ instead of $(src)/ for common pattern rules
In reply to Masahiro YamadaKbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build:
src := $(obj)
Before changing the semantics of $(src) in the next commit, this commit replaces $(obj)/ with $(src)/ in pattern rules where the prerequisite might be a generated file.
C, assembly, and Rust files are sometimes generated by tools, so they could be either generated files or real sources. The $(obj)/ prefix works for both cases with the help of VPATH.
As mentioned above, $(obj) and $(src) are the same at this point, hence this commit has no functional change.
I did not modify scripts/Makefile.userprogs because there is no use case where userspace C files are generated.
---
Changes in v2:
- replace $(src)/%.rs with $(obj)/%.rs because Rust files are also generated
scripts/Makefile.build | 26 +++++++++++++------------- scripts/Makefile.host | 4 ++-- 2 files changed, 15 insertions(+), 15 deletions(-)
scripts/Makefile.build +13 -13
@@ -113,13 +113,13 @@ endif quiet_cmd_cc_s_c = CC $(quiet_modtag) $@ cmd_cc_s_c = $(CC) $(filter-out $(DEBUG_CFLAGS) $(CC_FLAGS_LTO), $(c_flags)) -fverbose-asm -S -o $@ $< -$(obj)/%.s: $(src)/%.c FORCE +$(obj)/%.s: $(obj)/%.c FORCE $(call if_changed_dep,cc_s_c) quiet_cmd_cpp_i_c = CPP $(quiet_modtag) $@ cmd_cpp_i_c = $(CPP) $(c_flags) -o $@ $< -$(obj)/%.i: $(src)/%.c FORCE +$(obj)/%.i: $(obj)/%.c FORCE $(call if_changed_dep,cpp_i_c) genksyms = scripts/genksyms/genksyms \
@@ -133,7 +133,7 @@ cmd_gensymtypes_c = $(CPP) -D__GENKSYMS__ $(c_flags) $< | $(genksyms) quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ cmd_cc_symtypes_c = $(call cmd_gensymtypes_c,true,$@) >/dev/null -$(obj)/%.symtypes : $(src)/%.c FORCE +$(obj)/%.symtypes : $(obj)/%.c FORCE $(call cmd,cc_symtypes_c) # LLVM assembly
@@ -141,7 +141,7 @@ $(obj)/%.symtypes : $(src)/%.c FORCE quiet_cmd_cc_ll_c = CC $(quiet_modtag) $@ cmd_cc_ll_c = $(CC) $(c_flags) -emit-llvm -S -fno-discard-value-names -o $@ $< -$(obj)/%.ll: $(src)/%.c FORCE +$(obj)/%.ll: $(obj)/%.c FORCE $(call if_changed_dep,cc_ll_c) # C (.c) files
@@ -240,7 +240,7 @@ define rule_as_o_S endef # Built-in and composite module parts -$(obj)/%.o: $(src)/%.c $(recordmcount_source) FORCE +$(obj)/%.o: $(obj)/%.c $(recordmcount_source) FORCE $(call if_changed_rule,cc_o_c) $(call cmd,force_checksrc)
@@ -257,7 +257,7 @@ quiet_cmd_cc_lst_c = MKLST $@ $(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \ System.map $(OBJDUMP) > $@ -$(obj)/%.lst: $(src)/%.c FORCE +$(obj)/%.lst: $(obj)/%.c FORCE $(call if_changed_dep,cc_lst_c) # Compile Rust sources (.rs)
@@ -290,7 +290,7 @@ rust_common_cmd = \ quiet_cmd_rustc_o_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@ cmd_rustc_o_rs = $(rust_common_cmd) --emit=obj=$@ $< -$(obj)/%.o: $(src)/%.rs FORCE +$(obj)/%.o: $(obj)/%.rs FORCE +$(call if_changed_dep,rustc_o_rs) quiet_cmd_rustc_rsi_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@
@@ -298,19 +298,19 @@ quiet_cmd_rustc_rsi_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@ $(rust_common_cmd) -Zunpretty=expanded $< >$@; \ command -v $(RUSTFMT) >/dev/null && $(RUSTFMT) $@ -$(obj)/%.rsi: $(src)/%.rs FORCE +$(obj)/%.rsi: $(obj)/%.rs FORCE +$(call if_changed_dep,rustc_rsi_rs) quiet_cmd_rustc_s_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@ cmd_rustc_s_rs = $(rust_common_cmd) --emit=asm=$@ $< -$(obj)/%.s: $(src)/%.rs FORCE +$(obj)/%.s: $(obj)/%.rs FORCE +$(call if_changed_dep,rustc_s_rs) quiet_cmd_rustc_ll_rs = $(RUSTC_OR_CLIPPY_QUIET) $(quiet_modtag) $@ cmd_rustc_ll_rs = $(rust_common_cmd) --emit=llvm-ir=$@ $< -$(obj)/%.ll: $(src)/%.rs FORCE +$(obj)/%.ll: $(obj)/%.rs FORCE +$(call if_changed_dep,rustc_ll_rs) # Compile assembler sources (.S)
@@ -336,14 +336,14 @@ cmd_gensymtypes_S = \ quiet_cmd_cc_symtypes_S = SYM $(quiet_modtag) $@ cmd_cc_symtypes_S = $(call cmd_gensymtypes_S,true,$@) >/dev/null -$(obj)/%.symtypes : $(src)/%.S FORCE +$(obj)/%.symtypes : $(obj)/%.S FORCE $(call cmd,cc_symtypes_S) quiet_cmd_cpp_s_S = CPP $(quiet_modtag) $@ cmd_cpp_s_S = $(CPP) $(a_flags) -o $@ $< -$(obj)/%.s: $(src)/%.S FORCE +$(obj)/%.s: $(obj)/%.S FORCE $(call if_changed_dep,cpp_s_S) quiet_cmd_as_o_S = AS $(quiet_modtag) $@
@@ -358,7 +358,7 @@ cmd_gen_symversions_S = $(call gen_symversions,S) endif -$(obj)/%.o: $(src)/%.S FORCE +$(obj)/%.o: $(obj)/%.S FORCE $(call if_changed_rule,as_o_S) targets += $(filter-out $(subdir-builtin), $(real-obj-y))
scripts/Makefile.host +2 -2
@@ -112,7 +112,7 @@ endif quiet_cmd_host-csingle = HOSTCC $@ cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(KBUILD_HOSTLDFLAGS) -o $@ $< \ $(KBUILD_HOSTLDLIBS) $(HOSTLDLIBS_$(target-stem)) -$(host-csingle): $(obj)/%: $(src)/%.c FORCE +$(host-csingle): $(obj)/%: $(obj)/%.c FORCE $(call if_changed_dep,host-csingle) # Link an executable based on list of .o files, all plain c
@@ -129,7 +129,7 @@ $(call multi_depend, $(host-cmulti), , -objs) # host-cobjs -> .o quiet_cmd_host-cobjs = HOSTCC $@ cmd_host-cobjs = $(HOSTCC) $(hostc_flags) -c -o $@ $< -$(host-cobjs): $(obj)/%.o: $(src)/%.c FORCE +$(host-cobjs): $(obj)/%.o: $(obj)/%.c FORCE $(call if_changed_dep,host-cobjs) # Link an executable based on list of .o files, a mixture of .c and .cc
Signature · 1 line
2.40.1
PATCH v2 4/4 kbuild: use $(src) instead of $(srctree)/$(src) for source directory
In reply to Masahiro YamadaKbuild conventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined in scripts/Makefile.build:
src := $(obj)
When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While Kbuild resolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler.
This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following meanings:
$(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source tree
Consequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src).
---
Changes in v2:
- Rebase
Documentation/Makefile | 8 ++++---- Documentation/devicetree/bindings/Makefile | 6 +++--- Documentation/kbuild/makefiles.rst | 12 ++++++------ Makefile | 7 +++++++ arch/arc/boot/dts/Makefile | 3 +-- arch/arm/Kbuild | 2 +- arch/arm/boot/Makefile | 3 +-- arch/arm/mach-s3c/Makefile | 2 +- arch/arm/plat-orion/Makefile | 2 +- arch/arm/tools/Makefile | 2 +- arch/arm64/kernel/vdso/Makefile | 2 +- arch/arm64/kvm/Makefile | 4 ++-- arch/arm64/kvm/hyp/Makefile | 2 +- arch/csky/boot/dts/Makefile | 4 +--- arch/csky/kernel/vdso/Makefile | 2 +- arch/loongarch/kvm/Makefile | 2 +- arch/loongarch/vdso/Makefile | 2 +- arch/mips/kernel/syscalls/Makefile | 2 +- arch/mips/vdso/Makefile | 4 ++-- arch/nios2/boot/dts/Makefile | 3 +-- arch/parisc/kernel/vdso32/Makefile | 2 +- arch/parisc/kernel/vdso64/Makefile | 2 +- arch/powerpc/boot/Makefile | 6 +++--- arch/powerpc/boot/dts/Makefile | 3 +-- arch/powerpc/boot/dts/fsl/Makefile | 3 +-- arch/powerpc/kernel/vdso/Makefile | 4 ++-- arch/riscv/kernel/compat_vdso/Makefile | 2 +- arch/riscv/kernel/vdso/Makefile | 2 +- arch/riscv/kvm/Makefile | 2 +- arch/s390/kernel/syscalls/Makefile | 4 ++-- arch/s390/kernel/vdso32/Makefile | 2 +- arch/s390/kernel/vdso64/Makefile | 2 +- arch/sparc/vdso/Makefile | 2 +- arch/um/kernel/Makefile | 2 +- arch/x86/boot/Makefile | 2 +- arch/x86/entry/vdso/Makefile | 2 +- arch/x86/kernel/Makefile | 2 +- arch/x86/kernel/cpu/Makefile | 2 +- arch/x86/mm/Makefile | 2 +- arch/x86/um/vdso/Makefile | 2 +- arch/xtensa/boot/dts/Makefile | 3 +-- certs/Makefile | 4 ++-- drivers/Makefile | 5 ----- drivers/crypto/intel/qat/qat_420xx/Makefile | 2 +- drivers/crypto/intel/qat/qat_4xxx/Makefile | 2 +- drivers/crypto/intel/qat/qat_c3xxx/Makefile | 2 +- drivers/crypto/intel/qat/qat_c3xxxvf/Makefile | 2 +- drivers/crypto/intel/qat/qat_c62x/Makefile | 2 +- drivers/crypto/intel/qat/qat_c62xvf/Makefile | 2 +- drivers/crypto/intel/qat/qat_dh895xcc/Makefile | 2 +- drivers/crypto/intel/qat/qat_dh895xccvf/Makefile | 2 +- drivers/gpu/drm/amd/amdgpu/Makefile | 2 +- drivers/gpu/drm/arm/display/komeda/Makefile | 4 ++-- drivers/gpu/drm/i915/Makefile | 4 ++-- drivers/gpu/drm/imagination/Makefile | 2 +- drivers/gpu/drm/msm/Makefile | 8 ++++---- drivers/gpu/drm/nouveau/Kbuild | 10 ++++------ drivers/gpu/drm/xe/Makefile | 10 +++++----- drivers/hid/amd-sfh-hid/Makefile | 2 +- drivers/hid/intel-ish-hid/Makefile | 2 +- drivers/md/dm-vdo/Makefile | 2 +- drivers/net/ethernet/aquantia/atlantic/Makefile | 2 +- drivers/net/ethernet/chelsio/libcxgb/Makefile | 2 +- drivers/net/ethernet/fungible/funeth/Makefile | 2 +- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 +- .../wireless/broadcom/brcm80211/brcmfmac/Makefile | 4 ++-- .../broadcom/brcm80211/brcmfmac/bca/Makefile | 6 +++--- .../broadcom/brcm80211/brcmfmac/cyw/Makefile | 6 +++--- .../broadcom/brcm80211/brcmfmac/wcc/Makefile | 6 +++--- .../wireless/broadcom/brcm80211/brcmsmac/Makefile | 6 +++--- .../wireless/broadcom/brcm80211/brcmutil/Makefile | 2 +- drivers/net/wireless/intel/iwlwifi/dvm/Makefile | 2 +- drivers/net/wireless/intel/iwlwifi/mei/Makefile | 2 +- drivers/net/wireless/intel/iwlwifi/mvm/Makefile | 2 +- drivers/net/wireless/intel/iwlwifi/tests/Makefile | 2 +- .../net/wireless/realtek/rtl818x/rtl8180/Makefile | 2 +- .../net/wireless/realtek/rtl818x/rtl8187/Makefile | 2 +- drivers/scsi/aic7xxx/Makefile | 12 ++++++------ drivers/staging/rtl8723bs/Makefile | 2 +- fs/iomap/Makefile | 2 +- fs/unicode/Makefile | 14 +++++++------- fs/xfs/Makefile | 4 ++-- init/Makefile | 2 +- lib/Makefile | 6 +++--- lib/raid6/Makefile | 2 +- net/wireless/Makefile | 2 +- rust/Makefile | 6 +++--- samples/bpf/Makefile | 2 +- samples/hid/Makefile | 2 +- scripts/Kbuild.include | 3 +-- scripts/Makefile.asm-generic | 6 +++--- scripts/Makefile.build | 2 +- scripts/Makefile.clean | 2 +- scripts/Makefile.lib | 10 +++++----- scripts/Makefile.modpost | 2 +- scripts/dtc/Makefile | 6 +++--- scripts/gdb/linux/Makefile | 2 +- scripts/genksyms/Makefile | 4 ++-- scripts/kconfig/Makefile | 8 ++++---- security/tomoyo/Makefile | 2 +- usr/Makefile | 2 +- usr/include/Makefile | 2 +- 102 files changed, 173 insertions(+), 182 deletions(-)
Documentation/Makefile +4 -4
@@ -76,22 +76,22 @@ loop_cmd = $(echo-cmd) $(cmd_$(1)) || exit; # * dest folder relative to $(BUILDDIR) and # * cache folder relative to $(BUILDDIR)/.doctrees # $4 dest subfolder e.g. "man" for man pages at userspace-api/media/man -# $5 reST source folder relative to $(srctree)/$(src), +# $5 reST source folder relative to $(src), # e.g. "userspace-api/media" for the linux-tv book-set at ./Documentation/userspace-api/media quiet_cmd_sphinx = SPHINX $@ --> file://$(abspath $(BUILDDIR)/$3/$4) cmd_sphinx = $(MAKE) BUILDDIR=$(abspath $(BUILDDIR)) $(build)=Documentation/userspace-api/media $2 && \ PYTHONDONTWRITEBYTECODE=1 \ - BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(srctree)/$(src)/$5/$(SPHINX_CONF)) \ + BUILDDIR=$(abspath $(BUILDDIR)) SPHINX_CONF=$(abspath $(src)/$5/$(SPHINX_CONF)) \ $(PYTHON3) $(srctree)/scripts/jobserver-exec \ $(CONFIG_SHELL) $(srctree)/Documentation/sphinx/parallel-wrapper.sh \ $(SPHINXBUILD) \ -b $2 \ - -c $(abspath $(srctree)/$(src)) \ + -c $(abspath $(src)) \ -d $(abspath $(BUILDDIR)/.doctrees/$3) \ -D version=$(KERNELVERSION) -D release=$(KERNELRELEASE) \ $(ALLSPHINXOPTS) \ - $(abspath $(srctree)/$(src)/$5) \ + $(abspath $(src)/$5) \ $(abspath $(BUILDDIR)/$3/$4) && \ if [ "x$(DOCS_CSS)" != "x" ]; then \ cp $(if $(patsubst /%,,$(DOCS_CSS)),$(abspath $(srctree)/$(DOCS_CSS)),$(DOCS_CSS)) $(BUILDDIR)/$3/_static/; \
Documentation/devicetree/bindings/Makefile +3 -3
@@ -25,7 +25,7 @@ quiet_cmd_extract_ex = DTEX $@ $(obj)/%.example.dts: $(src)/%.yaml check_dtschema_version FORCE $(call if_changed,extract_ex) -find_all_cmd = find $(srctree)/$(src) \( -name '*.yaml' ! \ +find_all_cmd = find $(src) \( -name '*.yaml' ! \ -name 'processed-schema*' \) find_cmd = $(find_all_cmd) | \
@@ -37,12 +37,12 @@ CHK_DT_EXAMPLES := $(patsubst $(srctree)/%.yaml,%.example.dtb, $(shell $(find_cm quiet_cmd_yamllint = LINT $(src) cmd_yamllint = ($(find_cmd) | \ xargs -n200 -P$$(nproc) \ - $(DT_SCHEMA_LINT) -f parsable -c $(srctree)/$(src)/.yamllint >&2) \ + $(DT_SCHEMA_LINT) -f parsable -c $(src)/.yamllint >&2) \ && touch $@ || true quiet_cmd_chk_bindings = CHKDT $(src) cmd_chk_bindings = ($(find_cmd) | \ - xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(srctree)/$(src)) \ + xargs -n200 -P$$(nproc) $(DT_DOC_CHECKER) -u $(src)) \ && touch $@ || true quiet_cmd_mk_schema = SCHEMA $@
Documentation/kbuild/makefiles.rst +6 -6
@@ -346,7 +346,7 @@ ccflags-y, asflags-y and ldflags-y Example:: #arch/cris/boot/compressed/Makefile - ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds + ldflags-y += -T $(src)/decompress_$(arch-y).lds subdir-ccflags-y, subdir-asflags-y The two flags listed above are similar to ccflags-y and asflags-y.
@@ -426,14 +426,14 @@ path to prerequisite files and target files. Two variables are used when defining custom rules: $(src) - $(src) is a relative path which points to the directory - where the Makefile is located. Always use $(src) when + $(src) is the directory where the Makefile is located. Always use $(src) when referring to files located in the src tree. $(obj) - $(obj) is a relative path which points to the directory - where the target is saved. Always use $(obj) when - referring to generated files. + $(obj) is the directory where the target is saved. Always use $(obj) when + referring to generated files. Use $(obj) for pattern rules that need to work + for both generated files and real sources (VPATH will help to find the + prerequisites not only in the object tree but also in the source tree). Example::
Makefile +7 -0
@@ -263,7 +263,14 @@ srctree := $(abs_srctree) endif objtree := . + +VPATH := + +ifeq ($(KBUILD_EXTMOD),) +ifdef building_out_of_srctree VPATH := $(srctree) +endif +endif export building_out_of_srctree srctree objtree VPATH
arch/arc/boot/dts/Makefile +1 -2
@@ -10,8 +10,7 @@ obj-y += $(builtindtb-y).dtb.o dtb-y := $(builtindtb-y).dtb # for CONFIG_OF_ALL_DTBS test -dtstree := $(srctree)/$(src) -dtb- := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb- := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts)) # board-specific dtc flags DTC_FLAGS_hsdk += --pad 20
arch/arm/Kbuild +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_FPE_NWFPE) += nwfpe/ # Put arch/arm/fastfpe/ to use this. -obj-$(CONFIG_FPE_FASTFPE) += $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/fastfpe/)) +obj-$(CONFIG_FPE_FASTFPE) += $(patsubst $(src)/%,%,$(wildcard $(src)/fastfpe/)) obj-$(CONFIG_VFP) += vfp/ obj-$(CONFIG_XEN) += xen/ obj-$(CONFIG_VDSO) += vdso/
arch/arm/boot/Makefile +1 -2
@@ -25,8 +25,7 @@ targets := Image zImage xipImage bootpImage uImage ifeq ($(CONFIG_XIP_KERNEL),y) -cmd_deflate_xip_data = $(CONFIG_SHELL) -c \ - '$(srctree)/$(src)/deflate_xip_data.sh $< $@' +cmd_deflate_xip_data = $(CONFIG_SHELL) -c '$(src)/deflate_xip_data.sh $< $@' ifeq ($(CONFIG_XIP_DEFLATED_DATA),y) quiet_cmd_mkxip = XIPZ $@
arch/arm/mach-s3c/Makefile +1 -1
@@ -2,7 +2,7 @@ # # Copyright 2009 Simtec Electronics -include $(srctree)/$(src)/Makefile.s3c64xx +include $(src)/Makefile.s3c64xx # Objects we always build independent of SoC choice
arch/arm/plat-orion/Makefile +1 -1
@@ -2,7 +2,7 @@ # # Makefile for the linux kernel. # -ccflags-y := -I$(srctree)/$(src)/include +ccflags-y := -I$(src)/include orion-gpio-$(CONFIG_GPIOLIB) += gpio.o obj-$(CONFIG_PLAT_ORION_LEGACY) += irq.o pcie.o time.o common.o mpp.o
arch/arm/tools/Makefile +1 -1
@@ -9,7 +9,7 @@ gen := arch/$(ARCH)/include/generated kapi := $(gen)/asm uapi := $(gen)/uapi/asm syshdr := $(srctree)/scripts/syscallhdr.sh -sysnr := $(srctree)/$(src)/syscallnr.sh +sysnr := $(src)/syscallnr.sh systbl := $(srctree)/scripts/syscalltbl.sh syscall := $(src)/syscall.tbl
arch/arm64/kernel/vdso/Makefile +1 -1
@@ -68,7 +68,7 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) # Generate VDSO offsets using helper script -gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh +gen-vdsosym := $(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
arch/arm64/kvm/Makefile +2 -2
@@ -3,7 +3,7 @@ # Makefile for Kernel-based Virtual Machine module # -ccflags-y += -I $(srctree)/$(src) +ccflags-y += -I $(src) include $(srctree)/virt/kvm/Makefile.kvm
@@ -30,7 +30,7 @@ define rule_gen_hyp_constants $(call filechk,offsets,__HYP_CONSTANTS_H__) endef -CFLAGS_hyp-constants.o = -I $(srctree)/$(src)/hyp/include +CFLAGS_hyp-constants.o = -I $(src)/hyp/include $(obj)/hyp-constants.s: $(src)/hyp/hyp-constants.c FORCE $(call if_changed_dep,cc_s_c)
arch/arm64/kvm/hyp/Makefile +1 -1
@@ -3,7 +3,7 @@ # Makefile for Kernel-based Virtual Machine module, HYP part # -incdir := $(srctree)/$(src)/include +incdir := $(src)/include subdir-asflags-y := -I$(incdir) subdir-ccflags-y := -I$(incdir)
arch/csky/boot/dts/Makefile +1 -3
@@ -1,4 +1,2 @@ # SPDX-License-Identifier: GPL-2.0-only -dtstree := $(srctree)/$(src) - -dtb-y := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-y := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
arch/csky/kernel/vdso/Makefile +1 -1
@@ -57,4 +57,4 @@ quiet_cmd_vdsold = VDSOLD $@ # Extracts symbol offsets from the VDSO, converting them into an assembly file # that contains the same symbols at the same offsets. quiet_cmd_so2s = SO2S $@ - cmd_so2s = $(NM) -D $< | $(srctree)/$(src)/so2s.sh > $@ + cmd_so2s = $(NM) -D $< | $(src)/so2s.sh > $@
arch/loongarch/kvm/Makefile +1 -1
@@ -3,7 +3,7 @@ # Makefile for LoongArch KVM support # -ccflags-y += -I $(srctree)/$(src) +ccflags-y += -I $(src) include $(srctree)/virt/kvm/Makefile.kvm
arch/loongarch/vdso/Makefile +1 -1
@@ -52,7 +52,7 @@ quiet_cmd_vdsoas_o_S = AS $@ cmd_vdsoas_o_S = $(CC) $(a_flags) -c -o $@ $< # Generate VDSO offsets using helper script -gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh +gen-vdsosym := $(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
arch/mips/kernel/syscalls/Makefile +1 -1
@@ -5,7 +5,7 @@ uapi := arch/$(SRCARCH)/include/generated/uapi/asm $(shell mkdir -p $(uapi) $(kapi)) syshdr := $(srctree)/scripts/syscallhdr.sh -sysnr := $(srctree)/$(src)/syscallnr.sh +sysnr := $(src)/syscallnr.sh systbl := $(srctree)/scripts/syscalltbl.sh quiet_cmd_syshdr = SYSHDR $@
arch/mips/vdso/Makefile +2 -2
@@ -43,8 +43,8 @@ CFLAGS_vgettimeofday.o = -include $(c-gettimeofday-y) # config-n32-o32-env.c prepares the environment to build a 32bit vDSO # library on a 64bit kernel. # Note: Needs to be included before than the generic library. -CFLAGS_vgettimeofday-o32.o = -include $(srctree)/$(src)/config-n32-o32-env.c -include $(c-gettimeofday-y) -CFLAGS_vgettimeofday-n32.o = -include $(srctree)/$(src)/config-n32-o32-env.c -include $(c-gettimeofday-y) +CFLAGS_vgettimeofday-o32.o = -include $(src)/config-n32-o32-env.c -include $(c-gettimeofday-y) +CFLAGS_vgettimeofday-n32.o = -include $(src)/config-n32-o32-env.c -include $(c-gettimeofday-y) endif CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE)
arch/nios2/boot/dts/Makefile +1 -2
@@ -2,5 +2,4 @@ obj-y := $(patsubst %.dts,%.dtb.o,$(CONFIG_NIOS2_DTB_SOURCE)) -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
arch/parisc/kernel/vdso32/Makefile +1 -1
@@ -40,7 +40,7 @@ quiet_cmd_vdso32as = VDSO32A $@ cmd_vdso32as = $(CROSS32CC) $(a_flags) -c -o $@ $< # Generate VDSO offsets using helper script -gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh +gen-vdsosym := $(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
arch/parisc/kernel/vdso64/Makefile +1 -1
@@ -40,7 +40,7 @@ quiet_cmd_vdso64as = VDSO64A $@ cmd_vdso64as = $(CC) $(a_flags) -c -o $@ $< # Generate VDSO offsets using helper script -gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh +gen-vdsosym := $(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
arch/powerpc/boot/Makefile +3 -3
@@ -218,7 +218,7 @@ $(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc $(obj)/empty.c: $(Q)touch $@ -$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S +$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(src)/%.S $(Q)cp $< $@ clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \
@@ -252,9 +252,9 @@ targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds -dtstree := $(srctree)/$(src)/dts +dtstree := $(src)/dts -wrapper :=$(srctree)/$(src)/wrapper +wrapper := $(src)/wrapper wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ $(wrapper) FORCE
arch/powerpc/boot/dts/Makefile +1 -2
@@ -2,5 +2,4 @@ subdir-y += fsl -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
arch/powerpc/boot/dts/fsl/Makefile +1 -2
@@ -1,4 +1,3 @@ # SPDX-License-Identifier: GPL-2.0 -dtstree := $(srctree)/$(src) -dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb-$(CONFIG_OF_ALL_DTBS) := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
arch/powerpc/kernel/vdso/Makefile +2 -2
@@ -90,10 +90,10 @@ $(obj)/vgettimeofday-64.o: %-64.o: %.c FORCE $(call if_changed_dep,cc_o_c) # Generate VDSO offsets using helper script -gen-vdso32sym := $(srctree)/$(src)/gen_vdso32_offsets.sh +gen-vdso32sym := $(src)/gen_vdso32_offsets.sh quiet_cmd_vdso32sym = VDSO32SYM $@ cmd_vdso32sym = $(NM) $< | $(gen-vdso32sym) | LC_ALL=C sort > $@ -gen-vdso64sym := $(srctree)/$(src)/gen_vdso64_offsets.sh +gen-vdso64sym := $(src)/gen_vdso64_offsets.sh quiet_cmd_vdso64sym = VDSO64SYM $@ cmd_vdso64sym = $(NM) $< | $(gen-vdso64sym) | LC_ALL=C sort > $@
arch/riscv/kernel/compat_vdso/Makefile +1 -1
@@ -58,7 +58,7 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) # Generate VDSO offsets using helper script -gen-compat_vdsosym := $(srctree)/$(src)/gen_compat_vdso_offsets.sh +gen-compat_vdsosym := $(src)/gen_compat_vdso_offsets.sh quiet_cmd_compat_vdsosym = VDSOSYM $@ cmd_compat_vdsosym = $(NM) $< | $(gen-compat_vdsosym) | LC_ALL=C sort > $@
arch/riscv/kernel/vdso/Makefile +1 -1
@@ -60,7 +60,7 @@ $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) # Generate VDSO offsets using helper script -gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh +gen-vdsosym := $(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
arch/riscv/kvm/Makefile +1 -1
@@ -3,7 +3,7 @@ # Makefile for RISC-V KVM support # -ccflags-y += -I $(srctree)/$(src) +ccflags-y += -I $(src) include $(srctree)/virt/kvm/Makefile.kvm
arch/s390/kernel/syscalls/Makefile +2 -2
@@ -4,8 +4,8 @@ gen := arch/$(ARCH)/include/generated kapi := $(gen)/asm uapi := $(gen)/uapi/asm -syscall := $(srctree)/$(src)/syscall.tbl -systbl := $(srctree)/$(src)/syscalltbl +syscall := $(src)/syscall.tbl +systbl := $(src)/syscalltbl gen-y := $(kapi)/syscall_table.h kapi-hdrs-y := $(kapi)/unistd_nr.h
arch/s390/kernel/vdso32/Makefile +1 -1
@@ -62,7 +62,7 @@ quiet_cmd_vdso32cc = VDSO32C $@ cmd_vdso32cc = $(CC) $(c_flags) -c -o $@ $< # Generate VDSO offsets using helper script -gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh +gen-vdsosym := $(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
arch/s390/kernel/vdso64/Makefile +1 -1
@@ -72,7 +72,7 @@ quiet_cmd_vdso64cc = VDSO64C $@ cmd_vdso64cc = $(CC) $(c_flags) -c -o $@ $< # Generate VDSO offsets using helper script -gen-vdsosym := $(srctree)/$(src)/gen_vdso_offsets.sh +gen-vdsosym := $(src)/gen_vdso_offsets.sh quiet_cmd_vdsosym = VDSOSYM $@ cmd_vdsosym = $(NM) $< | $(gen-vdsosym) | LC_ALL=C sort > $@
arch/sparc/vdso/Makefile +1 -1
@@ -103,7 +103,7 @@ quiet_cmd_vdso = VDSO $@ cmd_vdso = $(LD) -nostdlib -o $@ \ $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \ -T $(filter %.lds,$^) $(filter %.o,$^) && \ - sh $(srctree)/$(src)/checkundef.sh '$(OBJDUMP)' '$@' + sh $(src)/checkundef.sh '$(OBJDUMP)' '$@' VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 -Bsymbolic GCOV_PROFILE := n
arch/um/kernel/Makefile +1 -1
@@ -47,7 +47,7 @@ $(obj)/config.c: $(src)/config.c.in $(obj)/config.tmp FORCE $(call if_changed,quote2) quiet_cmd_mkcapflags = MKCAP $@ - cmd_mkcapflags = $(CONFIG_SHELL) $(srctree)/$(src)/../../x86/kernel/cpu/mkcapflags.sh $@ $^ + cmd_mkcapflags = $(CONFIG_SHELL) $(src)/../../x86/kernel/cpu/mkcapflags.sh $@ $^ cpufeature = $(src)/../../x86/include/asm/cpufeatures.h vmxfeature = $(src)/../../x86/include/asm/vmxfeatures.h
arch/x86/boot/Makefile +1 -1
@@ -129,7 +129,7 @@ targets += mtools.conf # genimage.sh requires bash, but it also has a bunch of other # external dependencies. quiet_cmd_genimage = GENIMAGE $3 -cmd_genimage = $(BASH) $(srctree)/$(src)/genimage.sh $2 $3 $(obj)/bzImage \ + cmd_genimage = $(BASH) $(src)/genimage.sh $2 $3 $(obj)/bzImage \ $(obj)/mtools.conf '$(FDARGS)' $(FDINITRD) PHONY += bzdisk fdimage fdimage144 fdimage288 hdimage isoimage
arch/x86/entry/vdso/Makefile +1 -1
@@ -176,7 +176,7 @@ quiet_cmd_vdso = VDSO $@ cmd_vdso = $(LD) -o $@ \ $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \ -T $(filter %.lds,$^) $(filter %.o,$^) && \ - sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@' + sh $(src)/checkundef.sh '$(NM)' '$@' VDSO_LDFLAGS = -shared --hash-style=both --build-id=sha1 \ $(call ld-option, --eh-frame-hdr) -Bsymbolic -z noexecstack
arch/x86/kernel/Makefile +1 -1
@@ -40,7 +40,7 @@ KMSAN_SANITIZE_sev.o := n KCOV_INSTRUMENT_head$(BITS).o := n KCOV_INSTRUMENT_sev.o := n -CFLAGS_irq.o := -I $(srctree)/$(src)/../include/asm/trace +CFLAGS_irq.o := -I $(src)/../include/asm/trace obj-y += head_$(BITS).o obj-y += head$(BITS).o
arch/x86/kernel/cpu/Makefile +1 -1
@@ -60,7 +60,7 @@ obj-$(CONFIG_ACRN_GUEST) += acrn.o obj-$(CONFIG_DEBUG_FS) += debugfs.o quiet_cmd_mkcapflags = MKCAP $@ - cmd_mkcapflags = $(CONFIG_SHELL) $(srctree)/$(src)/mkcapflags.sh $@ $^ + cmd_mkcapflags = $(CONFIG_SHELL) $(src)/mkcapflags.sh $@ $^ cpufeature = $(src)/../../include/asm/cpufeatures.h vmxfeature = $(src)/../../include/asm/vmxfeatures.h
arch/x86/mm/Makefile +1 -1
@@ -34,7 +34,7 @@ obj-y += pat/ CFLAGS_physaddr.o := -fno-stack-protector CFLAGS_mem_encrypt_identity.o := -fno-stack-protector -CFLAGS_fault.o := -I $(srctree)/$(src)/../include/asm/trace +CFLAGS_fault.o := -I $(src)/../include/asm/trace obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o
arch/x86/um/vdso/Makefile +1 -1
@@ -63,7 +63,7 @@ quiet_cmd_vdso = VDSO $@ cmd_vdso = $(CC) -nostdlib -o $@ \ $(CC_FLAGS_LTO) $(VDSO_LDFLAGS) $(VDSO_LDFLAGS_$(filter %.lds,$(^F))) \ -Wl,-T,$(filter %.lds,$^) $(filter %.o,$^) && \ - sh $(srctree)/$(src)/checkundef.sh '$(NM)' '$@' + sh $(src)/checkundef.sh '$(NM)' '$@' VDSO_LDFLAGS = -fPIC -shared -Wl,--hash-style=sysv -z noexecstack GCOV_PROFILE := n
arch/xtensa/boot/dts/Makefile +1 -2
@@ -10,5 +10,4 @@ obj-$(CONFIG_OF) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_SOURCE)) # for CONFIG_OF_ALL_DTBS test -dtstree := $(srctree)/$(src) -dtb- := $(patsubst $(dtstree)/%.dts,%.dtb, $(wildcard $(dtstree)/*.dts)) +dtb- := $(patsubst $(src)/%.dts,%.dtb, $(wildcard $(src)/*.dts))
certs/Makefile +2 -2
@@ -13,7 +13,7 @@ CFLAGS_blacklist_hashes.o := -I $(obj) quiet_cmd_check_and_copy_blacklist_hash_list = GEN $@ cmd_check_and_copy_blacklist_hash_list = \ $(if $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST), \ - $(AWK) -f $(srctree)/$(src)/check-blacklist-hashes.awk $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST) >&2; \ + $(AWK) -f $(src)/check-blacklist-hashes.awk $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST) >&2; \ { cat $(CONFIG_SYSTEM_BLACKLIST_HASH_LIST); echo $(comma) NULL; } > $@, \ echo NULL > $@)
@@ -55,7 +55,7 @@ $(obj)/signing_key.pem: $(obj)/x509.genkey FORCE targets += signing_key.pem quiet_cmd_copy_x509_config = COPY $@ - cmd_copy_x509_config = cat $(srctree)/$(src)/default_x509.genkey > $@ + cmd_copy_x509_config = cat $(src)/default_x509.genkey > $@ # You can provide your own config file. If not present, copy the default one. $(obj)/x509.genkey:
drivers/Makefile +0 -5
@@ -6,11 +6,6 @@ # Rewritten to use lists instead of if-statements. # -# Some driver Makefiles miss $(srctree)/ for include directive. -ifdef building_out_of_srctree -MAKEFLAGS += --include-dir=$(srctree) -endif - obj-y += cache/ obj-y += irqchip/ obj-y += bus/
drivers/crypto/intel/qat/qat_420xx/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_420XX) += qat_420xx.o qat_420xx-objs := adf_drv.o adf_420xx_hw_data.o
drivers/crypto/intel/qat/qat_4xxx/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: (BSD-3-Clause OR GPL-2.0-only) -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_4XXX) += qat_4xxx.o qat_4xxx-objs := adf_drv.o adf_4xxx_hw_data.o
drivers/crypto/intel/qat/qat_c3xxx/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_C3XXX) += qat_c3xxx.o qat_c3xxx-objs := adf_drv.o adf_c3xxx_hw_data.o
drivers/crypto/intel/qat/qat_c3xxxvf/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_C3XXXVF) += qat_c3xxxvf.o qat_c3xxxvf-objs := adf_drv.o adf_c3xxxvf_hw_data.o
drivers/crypto/intel/qat/qat_c62x/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_C62X) += qat_c62x.o qat_c62x-objs := adf_drv.o adf_c62x_hw_data.o
drivers/crypto/intel/qat/qat_c62xvf/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_C62XVF) += qat_c62xvf.o qat_c62xvf-objs := adf_drv.o adf_c62xvf_hw_data.o
drivers/crypto/intel/qat/qat_dh895xcc/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_DH895xCC) += qat_dh895xcc.o qat_dh895xcc-objs := adf_drv.o adf_dh895xcc_hw_data.o
drivers/crypto/intel/qat/qat_dh895xccvf/Makefile +1 -1
@@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../qat_common +ccflags-y := -I $(src)/../qat_common obj-$(CONFIG_CRYPTO_DEV_QAT_DH895xCCVF) += qat_dh895xccvf.o qat_dh895xccvf-objs := adf_drv.o adf_dh895xccvf_hw_data.o
drivers/gpu/drm/amd/amdgpu/Makefile +1 -1
@@ -23,7 +23,7 @@ # Makefile for the drm device driver. This driver provides support for the # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. -FULL_AMD_PATH=$(srctree)/$(src)/.. +FULL_AMD_PATH=$(src)/.. DISPLAY_FOLDER_NAME=display FULL_AMD_DISPLAY_PATH = $(FULL_AMD_PATH)/$(DISPLAY_FOLDER_NAME)
drivers/gpu/drm/arm/display/komeda/Makefile +2 -2
@@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 ccflags-y := \ - -I $(srctree)/$(src)/../include \ - -I $(srctree)/$(src) + -I $(src)/../include \ + -I $(src) komeda-y := \ komeda_drv.o \
drivers/gpu/drm/i915/Makefile +2 -2
@@ -41,7 +41,7 @@ CFLAGS_display/intel_fbdev.o = -Wno-override-init # drivers. Define I915 when building i915. subdir-ccflags-y += -DI915 -subdir-ccflags-y += -I$(srctree)/$(src) +subdir-ccflags-y += -I$(src) # Please keep these build lists sorted!
@@ -434,7 +434,7 @@ no-header-test := \ always-$(CONFIG_DRM_I915_WERROR) += \ $(patsubst %.h,%.hdrtest, $(filter-out $(no-header-test), \ - $(shell cd $(srctree)/$(src) && find * -name '*.h'))) + $(shell cd $(src) && find * -name '*.h'))) quiet_cmd_hdrtest = HDRTEST $(patsubst %.hdrtest,%.h,$@) cmd_hdrtest = $(CC) $(filter-out $(CFLAGS_GCOV), $(c_flags)) -S -o /dev/null -x c /dev/null -include $<; \
drivers/gpu/drm/imagination/Makefile +1 -1
@@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only OR MIT # Copyright (c) 2023 Imagination Technologies Ltd. -subdir-ccflags-y := -I$(srctree)/$(src) +subdir-ccflags-y := -I$(src) powervr-y := \ pvr_ccb.o \
drivers/gpu/drm/msm/Makefile +4 -4
@@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 -ccflags-y := -I $(srctree)/$(src) -ccflags-y += -I $(srctree)/$(src)/disp/dpu1 -ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(srctree)/$(src)/dsi -ccflags-$(CONFIG_DRM_MSM_DP) += -I $(srctree)/$(src)/dp +ccflags-y := -I $(src) +ccflags-y += -I $(src)/disp/dpu1 +ccflags-$(CONFIG_DRM_MSM_DSI) += -I $(src)/dsi +ccflags-$(CONFIG_DRM_MSM_DP) += -I $(src)/dp msm-y := \ adreno/adreno_device.o \
drivers/gpu/drm/nouveau/Kbuild +4 -6
@@ -1,10 +1,8 @@ -NOUVEAU_PATH ?= $(srctree) - # SPDX-License-Identifier: MIT -ccflags-y += -I $(NOUVEAU_PATH)/$(src)/include -ccflags-y += -I $(NOUVEAU_PATH)/$(src)/include/nvkm -ccflags-y += -I $(NOUVEAU_PATH)/$(src)/nvkm -ccflags-y += -I $(NOUVEAU_PATH)/$(src) +ccflags-y += -I $(src)/include +ccflags-y += -I $(src)/include/nvkm +ccflags-y += -I $(src)/nvkm +ccflags-y += -I $(src) # NVKM - HW resource manager #- code also used by various userspace tools/tests
drivers/gpu/drm/xe/Makefile +5 -5
@@ -32,7 +32,7 @@ endif # Enable -Werror in CI and development subdir-ccflags-$(CONFIG_DRM_XE_WERROR) += -Werror -subdir-ccflags-y += -I$(obj) -I$(srctree)/$(src) +subdir-ccflags-y += -I$(obj) -I$(src) # generated sources hostprogs := xe_gen_wa_oob
@@ -43,7 +43,7 @@ quiet_cmd_wa_oob = GEN $(notdir $(generated_oob)) cmd_wa_oob = mkdir -p $(@D); $^ $(generated_oob) $(obj)/generated/%_wa_oob.c $(obj)/generated/%_wa_oob.h: $(obj)/xe_gen_wa_oob \ - $(srctree)/$(src)/xe_wa_oob.rules + $(src)/xe_wa_oob.rules $(call cmd,wa_oob) uses_generated_oob := \
@@ -166,8 +166,8 @@ endif # i915 Display compat #defines and #includes subdir-ccflags-$(CONFIG_DRM_XE_DISPLAY) += \ - -I$(srctree)/$(src)/display/ext \ - -I$(srctree)/$(src)/compat-i915-headers \ + -I$(src)/display/ext \ + -I$(src)/compat-i915-headers \ -I$(srctree)/drivers/gpu/drm/i915/display/ \ -Ddrm_i915_gem_object=xe_bo \ -Ddrm_i915_private=xe_device
@@ -310,7 +310,7 @@ ifneq ($(CONFIG_DRM_XE_DISPLAY),y) endif always-$(CONFIG_DRM_XE_WERROR) += \ - $(patsubst %.h,%.hdrtest, $(shell cd $(srctree)/$(src) && find * -name '*.h' $(hdrtest_find_args))) + $(patsubst %.h,%.hdrtest, $(shell cd $(src) && find * -name '*.h' $(hdrtest_find_args))) quiet_cmd_hdrtest = HDRTEST $(patsubst %.hdrtest,%.h,$@) cmd_hdrtest = $(CC) -DHDRTEST $(filter-out $(CFLAGS_GCOV), $(c_flags)) -S -o /dev/null -x c /dev/null -include $<; touch $@
drivers/hid/amd-sfh-hid/Makefile +1 -1
@@ -13,4 +13,4 @@ amd_sfh-objs += sfh1_1/amd_sfh_init.o amd_sfh-objs += sfh1_1/amd_sfh_interface.o amd_sfh-objs += sfh1_1/amd_sfh_desc.o -ccflags-y += -I $(srctree)/$(src)/ +ccflags-y += -I $(src)/
drivers/hid/intel-ish-hid/Makefile +1 -1
@@ -23,4 +23,4 @@ intel-ishtp-hid-objs += ishtp-hid-client.o obj-$(CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ishtp-loader.o intel-ishtp-loader-objs += ishtp-fw-loader.o -ccflags-y += -I $(srctree)/$(src)/ishtp +ccflags-y += -I $(src)/ishtp
drivers/md/dm-vdo/Makefile +1 -1
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I$(srctree)/$(src) -I$(srctree)/$(src)/indexer +ccflags-y := -I$(src) -I$(src)/indexer obj-$(CONFIG_DM_VDO) += dm-vdo.o
drivers/net/ethernet/aquantia/atlantic/Makefile +1 -1
@@ -8,7 +8,7 @@ obj-$(CONFIG_AQTION) += atlantic.o -ccflags-y += -I$(srctree)/$(src) +ccflags-y += -I$(src) atlantic-objs := aq_main.o \ aq_nic.o \
drivers/net/ethernet/chelsio/libcxgb/Makefile +1 -1
@@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -ccflags-y := -I $(srctree)/$(src)/../cxgb4 +ccflags-y := -I $(src)/../cxgb4 obj-$(CONFIG_CHELSIO_LIB) += libcxgb.o
drivers/net/ethernet/fungible/funeth/Makefile +1 -1
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) -ccflags-y += -I$(srctree)/$(src)/../funcore -I$(srctree)/$(src) +ccflags-y += -I$(src)/../funcore -I$(src) obj-$(CONFIG_FUN_ETH) += funeth.o
drivers/net/ethernet/hisilicon/hns3/Makefile +1 -1
@@ -3,7 +3,7 @@ # Makefile for the HISILICON network device drivers. # -ccflags-y += -I$(srctree)/$(src) +ccflags-y += -I$(src) ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3pf ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3vf ccflags-y += -I$(srctree)/drivers/net/ethernet/hisilicon/hns3/hns3_common
drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile +2 -2
@@ -6,8 +6,8 @@ # ccflags-y += \ - -I $(srctree)/$(src) \ - -I $(srctree)/$(src)/../include + -I $(src) \ + -I $(src)/../include obj-$(CONFIG_BRCMFMAC) += brcmfmac.o brcmfmac-objs += \
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bca/Makefile +3 -3
@@ -3,9 +3,9 @@ # Copyright (c) 2022 Broadcom Corporation ccflags-y += \ - -I $(srctree)/$(src) \ - -I $(srctree)/$(src)/.. \ - -I $(srctree)/$(src)/../../include + -I $(src) \ + -I $(src)/.. \ + -I $(src)/../../include obj-m += brcmfmac-bca.o brcmfmac-bca-objs += \
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/Makefile +3 -3
@@ -3,9 +3,9 @@ # Copyright (c) 2022 Broadcom Corporation ccflags-y += \ - -I $(srctree)/$(src) \ - -I $(srctree)/$(src)/.. \ - -I $(srctree)/$(src)/../../include + -I $(src) \ + -I $(src)/.. \ + -I $(src)/../../include obj-m += brcmfmac-cyw.o brcmfmac-cyw-objs += \
drivers/net/wireless/broadcom/brcm80211/brcmfmac/wcc/Makefile +3 -3
@@ -3,9 +3,9 @@ # Copyright (c) 2022 Broadcom Corporation ccflags-y += \ - -I $(srctree)/$(src) \ - -I $(srctree)/$(src)/.. \ - -I $(srctree)/$(src)/../../include + -I $(src) \ + -I $(src)/.. \ + -I $(src)/../../include obj-m += brcmfmac-wcc.o brcmfmac-wcc-objs += \
drivers/net/wireless/broadcom/brcm80211/brcmsmac/Makefile +3 -3
@@ -16,9 +16,9 @@ # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. ccflags-y := \ - -I $(srctree)/$(src) \ - -I $(srctree)/$(src)/phy \ - -I $(srctree)/$(src)/../include + -I $(src) \ + -I $(src)/phy \ + -I $(src)/../include brcmsmac-y := \ mac80211_if.o \
drivers/net/wireless/broadcom/brcm80211/brcmutil/Makefile +1 -1
@@ -4,7 +4,7 @@ # # Copyright (c) 2011 Broadcom Corporation # -ccflags-y := -I $(srctree)/$(src)/../include +ccflags-y := -I $(src)/../include obj-$(CONFIG_BRCMUTIL) += brcmutil.o brcmutil-objs = utils.o d11.o
drivers/net/wireless/intel/iwlwifi/dvm/Makefile +1 -1
@@ -11,4 +11,4 @@ iwldvm-objs += rxon.o devices.o iwldvm-$(CONFIG_IWLWIFI_LEDS) += led.o iwldvm-$(CONFIG_IWLWIFI_DEBUGFS) += debugfs.o -ccflags-y += -I $(srctree)/$(src)/../ +ccflags-y += -I $(src)/../
drivers/net/wireless/intel/iwlwifi/mei/Makefile +1 -1
@@ -5,4 +5,4 @@ iwlmei-y += net.o iwlmei-$(CONFIG_IWLWIFI_DEVICE_TRACING) += trace.o CFLAGS_trace.o := -I$(src) -ccflags-y += -I $(srctree)/$(src)/../ +ccflags-y += -I $(src)/../
drivers/net/wireless/intel/iwlwifi/mvm/Makefile +1 -1
@@ -15,4 +15,4 @@ iwlmvm-$(CONFIG_IWLWIFI_LEDS) += led.o iwlmvm-$(CONFIG_PM) += d3.o iwlmvm-$(CONFIG_IWLMEI) += vendor-cmd.o -ccflags-y += -I $(srctree)/$(src)/../ +ccflags-y += -I $(src)/../
drivers/net/wireless/intel/iwlwifi/tests/Makefile +1 -1
@@ -2,6 +2,6 @@ iwlwifi-tests-y += module.o devinfo.o -ccflags-y += -I$(srctree)/$(src)/../ +ccflags-y += -I$(src)/../ obj-$(CONFIG_IWLWIFI_KUNIT_TESTS) += iwlwifi-tests.o
drivers/net/wireless/realtek/rtl818x/rtl8180/Makefile +1 -1
@@ -3,4 +3,4 @@ rtl818x_pci-objs := dev.o rtl8225.o sa2400.o max2820.o grf5101.o rtl8225se.o obj-$(CONFIG_RTL8180) += rtl818x_pci.o -ccflags-y += -I $(srctree)/$(src)/.. +ccflags-y += -I $(src)/..
drivers/net/wireless/realtek/rtl818x/rtl8187/Makefile +1 -1
@@ -3,4 +3,4 @@ rtl8187-objs := dev.o rtl8225.o leds.o rfkill.o obj-$(CONFIG_RTL8187) += rtl8187.o -ccflags-y += -I $(srctree)/$(src)/.. +ccflags-y += -I $(src)/..
drivers/scsi/aic7xxx/Makefile +6 -6
@@ -55,9 +55,9 @@ aicasm-7xxx-opts-$(CONFIG_AIC7XXX_REG_PRETTY_PRINT) := \ ifeq ($(CONFIG_AIC7XXX_BUILD_FIRMWARE),y) $(obj)/aic7xxx_seq.h: $(src)/aic7xxx.seq $(src)/aic7xxx.reg $(obj)/aicasm/aicasm - $(obj)/aicasm/aicasm -I$(srctree)/$(src) -r $(obj)/aic7xxx_reg.h \ + $(obj)/aicasm/aicasm -I $(src) -r $(obj)/aic7xxx_reg.h \ $(aicasm-7xxx-opts-y) -o $(obj)/aic7xxx_seq.h \ - $(srctree)/$(src)/aic7xxx.seq + $(src)/aic7xxx.seq $(aic7xxx-gen-y): $(objtree)/$(obj)/aic7xxx_seq.h @true
@@ -73,9 +73,9 @@ aicasm-79xx-opts-$(CONFIG_AIC79XX_REG_PRETTY_PRINT) := \ ifeq ($(CONFIG_AIC79XX_BUILD_FIRMWARE),y) $(obj)/aic79xx_seq.h: $(src)/aic79xx.seq $(src)/aic79xx.reg $(obj)/aicasm/aicasm - $(obj)/aicasm/aicasm -I$(srctree)/$(src) -r $(obj)/aic79xx_reg.h \ + $(obj)/aicasm/aicasm -I $(src) -r $(obj)/aic79xx_reg.h \ $(aicasm-79xx-opts-y) -o $(obj)/aic79xx_seq.h \ - $(srctree)/$(src)/aic79xx.seq + $(src)/aic79xx.seq $(aic79xx-gen-y): $(objtree)/$(obj)/aic79xx_seq.h @true
@@ -83,5 +83,5 @@ else $(obj)/aic79xx_reg_print.c: $(src)/aic79xx_reg_print.c_shipped endif -$(obj)/aicasm/aicasm: $(srctree)/$(src)/aicasm/*.[chyl] - $(MAKE) -C $(srctree)/$(src)/aicasm OUTDIR=$(shell pwd)/$(obj)/aicasm/ +$(obj)/aicasm/aicasm: $(src)/aicasm/*.[chyl] + $(MAKE) -C $(src)/aicasm OUTDIR=$(shell pwd)/$(obj)/aicasm/
drivers/staging/rtl8723bs/Makefile +1 -1
@@ -62,4 +62,4 @@ r8723bs-y = \ obj-$(CONFIG_RTL8723BS) := r8723bs.o -ccflags-y += -I$(srctree)/$(src)/include -I$(srctree)/$(src)/hal +ccflags-y += -I$(src)/include -I$(src)/hal
fs/iomap/Makefile +1 -1
@@ -4,7 +4,7 @@ # All Rights Reserved. # -ccflags-y += -I $(srctree)/$(src) # needed for trace events +ccflags-y += -I $(src) # needed for trace events obj-$(CONFIG_FS_IOMAP) += iomap.o
fs/unicode/Makefile +7 -7
@@ -18,13 +18,13 @@ ifdef REGENERATE_UTF8DATA quiet_cmd_utf8data = GEN $@ cmd_utf8data = $< \ - -a $(srctree)/$(src)/DerivedAge.txt \ - -c $(srctree)/$(src)/DerivedCombiningClass.txt \ - -p $(srctree)/$(src)/DerivedCoreProperties.txt \ - -d $(srctree)/$(src)/UnicodeData.txt \ - -f $(srctree)/$(src)/CaseFolding.txt \ - -n $(srctree)/$(src)/NormalizationCorrections.txt \ - -t $(srctree)/$(src)/NormalizationTest.txt \ + -a $(src)/DerivedAge.txt \ + -c $(src)/DerivedCombiningClass.txt \ + -p $(src)/DerivedCoreProperties.txt \ + -d $(src)/UnicodeData.txt \ + -f $(src)/CaseFolding.txt \ + -n $(src)/NormalizationCorrections.txt \ + -t $(src)/NormalizationTest.txt \ -o $@ $(obj)/utf8data.c: $(obj)/mkutf8data $(filter %.txt, $(cmd_utf8data)) FORCE
fs/xfs/Makefile +2 -2
@@ -4,8 +4,8 @@ # All Rights Reserved. # -ccflags-y += -I $(srctree)/$(src) # needed for trace events -ccflags-y += -I $(srctree)/$(src)/libxfs +ccflags-y += -I $(src) # needed for trace events +ccflags-y += -I $(src)/libxfs obj-$(CONFIG_XFS_FS) += xfs.o
init/Makefile +1 -1
@@ -52,7 +52,7 @@ CFLAGS_version.o := -include $(obj)/utsversion-tmp.h # Build version-timestamp.c with final UTS_VERSION # -include/generated/utsversion.h: build-version-auto = $(shell $(srctree)/$(src)/build-version) +include/generated/utsversion.h: build-version-auto = $(shell $(src)/build-version) include/generated/utsversion.h: build-timestamp-auto = $(shell LC_ALL=C date) include/generated/utsversion.h: FORCE $(call filechk,uts_version)
lib/Makefile +3 -3
@@ -352,7 +352,7 @@ $(obj)/oid_registry_data.c: $(srctree)/include/linux/oid_registry.h \ $(call cmd,build_OID_registry) quiet_cmd_build_OID_registry = GEN $@ - cmd_build_OID_registry = perl $(srctree)/$(src)/build_OID_registry $< $@ + cmd_build_OID_registry = perl $(src)/build_OID_registry $< $@ clean-files += oid_registry_data.c
@@ -412,8 +412,8 @@ obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o obj-$(CONFIG_FIRMWARE_TABLE) += fw_table.o # FORTIFY_SOURCE compile-time behavior tests -TEST_FORTIFY_SRCS = $(wildcard $(srctree)/$(src)/test_fortify/*-*.c) -TEST_FORTIFY_LOGS = $(patsubst $(srctree)/$(src)/%.c, %.log, $(TEST_FORTIFY_SRCS)) +TEST_FORTIFY_SRCS = $(wildcard $(src)/test_fortify/*-*.c) +TEST_FORTIFY_LOGS = $(patsubst $(src)/%.c, %.log, $(TEST_FORTIFY_SRCS)) TEST_FORTIFY_LOG = test_fortify.log quiet_cmd_test_fortify = TEST $@
lib/raid6/Makefile +1 -1
@@ -53,7 +53,7 @@ endif endif quiet_cmd_unroll = UNROLL $@ - cmd_unroll = $(AWK) -v N=$* -f $(srctree)/$(src)/unroll.awk < $< > $@ + cmd_unroll = $(AWK) -v N=$* -f $(src)/unroll.awk < $< > $@ targets += int1.c int2.c int4.c int8.c $(obj)/int%.c: $(src)/int.uc $(src)/unroll.awk FORCE
net/wireless/Makefile +1 -1
@@ -25,7 +25,7 @@ ifneq ($(CONFIG_CFG80211_EXTRA_REGDB_KEYDIR),) cfg80211-y += extra-certs.o endif -$(obj)/shipped-certs.c: $(sort $(wildcard $(srctree)/$(src)/certs/*.hex)) +$(obj)/shipped-certs.c: $(sort $(wildcard $(src)/certs/*.hex)) @$(kecho) " GEN $@" $(Q)(echo '#include "reg.h"'; \ echo 'const u8 shipped_regdb_certs[] = {'; \
rust/Makefile +3 -3
@@ -239,7 +239,7 @@ quiet_cmd_rustsysroot = RUSTSYSROOT rm -rf $(objtree)/$(obj)/test; \ mkdir -p $(objtree)/$(obj)/test; \ cp -a $(rustc_sysroot) $(objtree)/$(obj)/test/sysroot; \ - cp -r $(srctree)/$(src)/alloc/* \ + cp -r $(src)/alloc/* \ $(objtree)/$(obj)/test/sysroot/lib/rustlib/src/rust/library/alloc/src; \ echo '\#!/bin/sh' > $(objtree)/$(obj)/test/rustc_sysroot; \ echo "$(RUSTC) --sysroot=$(abspath $(objtree)/$(obj)/test/sysroot) \"\$$@\"" \
@@ -340,7 +340,7 @@ quiet_cmd_bindgen = BINDGEN $@ $(bindgen_target_cflags) $(bindgen_target_extra) $(obj)/bindings/bindings_generated.rs: private bindgen_target_flags = \ - $(shell grep -Ev '^#|^$$' $(srctree)/$(src)/bindgen_parameters) + $(shell grep -Ev '^#|^$$' $(src)/bindgen_parameters) $(obj)/bindings/bindings_generated.rs: private bindgen_target_extra = ; \ sed -Ei 's/pub const RUST_CONST_HELPER_([a-zA-Z0-9_]*)/pub const \1/g' $@ $(obj)/bindings/bindings_generated.rs: $(src)/bindings/bindings_helper.h \
@@ -348,7 +348,7 @@ $(obj)/bindings/bindings_generated.rs: $(src)/bindings/bindings_helper.h \ $(call if_changed_dep,bindgen) $(obj)/uapi/uapi_generated.rs: private bindgen_target_flags = \ - $(shell grep -Ev '^#|^$$' $(srctree)/$(src)/bindgen_parameters) + $(shell grep -Ev '^#|^$$' $(src)/bindgen_parameters) $(obj)/uapi/uapi_generated.rs: $(src)/uapi/uapi_helper.h \ $(src)/bindgen_parameters FORCE $(call if_changed_dep,bindgen)
samples/bpf/Makefile +1 -1
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -BPF_SAMPLES_PATH ?= $(abspath $(srctree)/$(src)) +BPF_SAMPLES_PATH ?= $(abspath $(src)) TOOLS_PATH := $(BPF_SAMPLES_PATH)/../../tools pound := \#
samples/hid/Makefile +1 -1
@@ -1,6 +1,6 @@ # SPDX-License-Identifier: GPL-2.0 -HID_SAMPLES_PATH ?= $(abspath $(srctree)/$(src)) +HID_SAMPLES_PATH ?= $(abspath $(src)) TOOLS_PATH := $(HID_SAMPLES_PATH)/../../tools pound := \#
scripts/Kbuild.include +1 -2
@@ -62,8 +62,7 @@ stringify = $(squote)$(quote)$1$(quote)$(squote) ### # The path to Kbuild or Makefile. Kbuild has precedence over Makefile. -kbuild-dir = $(if $(filter /%,$(src)),$(src),$(srctree)/$(src)) -kbuild-file = $(or $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Makefile) +kbuild-file = $(or $(wildcard $(src)/Kbuild),$(src)/Makefile) ### # Read a file, replacing newlines with spaces
scripts/Makefile.asm-generic +3 -3
@@ -9,7 +9,7 @@ PHONY := all all: -src := $(subst /generated,,$(obj)) +src := $(srctree)/$(subst /generated,,$(obj)) include $(srctree)/scripts/Kbuild.include -include $(kbuild-file)
@@ -20,14 +20,14 @@ include $(srctree)/$(generic)/Kbuild endif redundant := $(filter $(mandatory-y) $(generated-y), $(generic-y)) -redundant += $(foreach f, $(generic-y), $(if $(wildcard $(srctree)/$(src)/$(f)),$(f))) +redundant += $(foreach f, $(generic-y), $(if $(wildcard $(src)/$(f)),$(f))) redundant := $(sort $(redundant)) $(if $(redundant),\ $(warning redundant generic-y found in $(src)/Kbuild: $(redundant))) # If arch does not implement mandatory headers, fallback to asm-generic ones. mandatory-y := $(filter-out $(generated-y), $(mandatory-y)) -generic-y += $(foreach f, $(mandatory-y), $(if $(wildcard $(srctree)/$(src)/$(f)),,$(f))) +generic-y += $(foreach f, $(mandatory-y), $(if $(wildcard $(src)/$(f)),,$(f))) generic-y := $(addprefix $(obj)/, $(generic-y)) generated-y := $(addprefix $(obj)/, $(generated-y))
scripts/Makefile.build +1 -1
@@ -3,7 +3,7 @@ # Building # ========================================================================== -src := $(obj) +src := $(if $(VPATH),$(VPATH)/)$(obj) PHONY := $(obj)/ $(obj)/:
scripts/Makefile.clean +1 -1
@@ -3,7 +3,7 @@ # Cleaning up # ========================================================================== -src := $(obj) +src := $(if $(VPATH),$(VPATH)/)$(obj) PHONY := __clean __clean:
scripts/Makefile.lib +5 -5
@@ -209,13 +209,13 @@ _c_flags += $(if $(patsubst n%,, \ -D__KCSAN_INSTRUMENT_BARRIERS__) endif -# $(srctree)/$(src) for including checkin headers from generated source files -# $(objtree)/$(obj) for including generated headers from checkin source files +# $(src) for including checkin headers from generated source files +# $(obj) for including generated headers from checkin source files ifeq ($(KBUILD_EXTMOD),) ifdef building_out_of_srctree -_c_flags += $(addprefix -I $(srctree)/,$(src)) $(addprefix -I $(objtree)/,$(obj)) -_a_flags += $(addprefix -I $(srctree)/,$(src)) $(addprefix -I $(objtree)/,$(obj)) -_cpp_flags += $(addprefix -I $(srctree)/,$(src)) $(addprefix -I $(objtree)/,$(obj)) +_c_flags += $(addprefix -I, $(src) $(obj)) +_a_flags += $(addprefix -I, $(src) $(obj)) +_cpp_flags += $(addprefix -I, $(src) $(obj)) endif endif
scripts/Makefile.modpost +1 -1
@@ -112,7 +112,7 @@ else # set src + obj - they may be used in the modules's Makefile obj := $(KBUILD_EXTMOD) -src := $(obj) +src := $(if $(VPATH),$(VPATH)/)$(obj) # Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS include $(kbuild-file)
scripts/dtc/Makefile +3 -3
@@ -16,12 +16,12 @@ libfdt = $(addprefix libfdt/,$(libfdt-objs)) fdtoverlay-objs := $(libfdt) fdtoverlay.o util.o # Source files need to get at the userspace version of libfdt_env.h to compile -HOST_EXTRACFLAGS += -I $(srctree)/$(src)/libfdt +HOST_EXTRACFLAGS += -I $(src)/libfdt HOST_EXTRACFLAGS += -DNO_YAML # Generated files need one more search path to include headers in source tree -HOSTCFLAGS_dtc-lexer.lex.o := -I $(srctree)/$(src) -HOSTCFLAGS_dtc-parser.tab.o := -I $(srctree)/$(src) +HOSTCFLAGS_dtc-lexer.lex.o := -I $(src) +HOSTCFLAGS_dtc-parser.tab.o := -I $(src) # dependencies on generated files need to be listed explicitly $(obj)/dtc-lexer.lex.o: $(obj)/dtc-parser.tab.h
scripts/gdb/linux/Makefile +1 -1
@@ -2,7 +2,7 @@ ifdef building_out_of_srctree -symlinks := $(patsubst $(srctree)/$(src)/%,%,$(wildcard $(srctree)/$(src)/*.py)) +symlinks := $(patsubst $(src)/%,%,$(wildcard $(src)/*.py)) quiet_cmd_symlink = SYMLINK $@ cmd_symlink = ln -fsn $(patsubst $(obj)/%,$(abspath $(srctree))/$(src)/%,$@) $@
scripts/genksyms/Makefile +2 -2
@@ -23,8 +23,8 @@ $(obj)/pars%.tab.c $(obj)/pars%.tab.h: $(src)/pars%.y FORCE endif # -I needed for generated C source to include headers in source tree -HOSTCFLAGS_parse.tab.o := -I $(srctree)/$(src) -HOSTCFLAGS_lex.lex.o := -I $(srctree)/$(src) +HOSTCFLAGS_parse.tab.o := -I $(src) +HOSTCFLAGS_lex.lex.o := -I $(src) # dependencies on generated files need to be listed explicitly $(obj)/lex.lex.o: $(obj)/parse.tab.h
scripts/kconfig/Makefile +4 -4
@@ -57,7 +57,7 @@ $(foreach c, config menuconfig nconfig gconfig xconfig, $(eval $(call config_rul PHONY += localmodconfig localyesconfig localyesconfig localmodconfig: $(obj)/conf - $(Q)$(PERL) $(srctree)/$(src)/streamline_config.pl --$@ $(srctree) $(Kconfig) > .tmp.config + $(Q)$(PERL) $(src)/streamline_config.pl --$@ $(srctree) $(Kconfig) > .tmp.config $(Q)if [ -f .config ]; then \ cmp -s .tmp.config .config || \ (mv -f .config .config.old.1; \
@@ -118,7 +118,7 @@ tinyconfig: # CHECK: -o cache_dir=<path> working? PHONY += testconfig testconfig: $(obj)/conf - $(Q)$(PYTHON3) -B -m pytest $(srctree)/$(src)/tests \ + $(Q)$(PYTHON3) -B -m pytest $(src)/tests \ -o cache_dir=$(abspath $(obj)/tests/.cache) \ $(if $(findstring 1,$(KBUILD_VERBOSE)),--capture=no) clean-files += tests/.cache
@@ -165,8 +165,8 @@ common-objs := confdata.o expr.o lexer.lex.o menu.o parser.tab.o \ preprocess.o symbol.o util.o $(obj)/lexer.lex.o: $(obj)/parser.tab.h -HOSTCFLAGS_lexer.lex.o := -I $(srctree)/$(src) -HOSTCFLAGS_parser.tab.o := -I $(srctree)/$(src) +HOSTCFLAGS_lexer.lex.o := -I $(src) +HOSTCFLAGS_parser.tab.o := -I $(src) # conf: Used for defconfig, oldconfig and related targets hostprogs += conf
security/tomoyo/Makefile +1 -1
@@ -11,7 +11,7 @@ quiet_cmd_policy = POLICY $@ printf '\t"";\n';) \ } > $@ -$(obj)/builtin-policy.h: $(wildcard $(obj)/policy/*.conf $(srctree)/$(src)/policy/*.conf.default) FORCE +$(obj)/builtin-policy.h: $(wildcard $(obj)/policy/*.conf $(src)/policy/*.conf.default) FORCE $(call if_changed,policy) ifndef CONFIG_SECURITY_TOMOYO_INSECURE_BUILTIN_SETTING
usr/Makefile +1 -1
@@ -22,7 +22,7 @@ cpio-data := # If CONFIG_INITRAMFS_SOURCE is empty, generate a small initramfs with the # default contents. ifeq ($(ramfs-input),) -ramfs-input := $(srctree)/$(src)/default_cpio_list +ramfs-input := $(src)/default_cpio_list endif ifeq ($(words $(ramfs-input)),1)
usr/include/Makefile +1 -1
@@ -78,7 +78,7 @@ quiet_cmd_hdrtest = HDRTEST $< cmd_hdrtest = \ $(CC) $(c_flags) -fsyntax-only -x c /dev/null \ $(if $(filter-out $(no-header-test), $*.h), -include $< -include $<); \ - $(PERL) $(srctree)/$(src)/headers_check.pl $(obj) $(SRCARCH) $<; \ + $(PERL) $(src)/headers_check.pl $(obj) $(SRCARCH) $<; \ touch $@ $(obj)/%.hdrtest: $(obj)/%.h FORCE
Signature · 1 line
2.40.1
Krzysztof Kozlowski
maintainerRe: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 23 lines · Masahiro Yamada
Kbuildconventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined inscripts/Makefile.build:src := $(obj)When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While
Kbuildresolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler.This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following meanings:
Quoted 8 lines
$(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source treeConsequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src).
This patch, since yesterday's next, causes build issues with my (completely) standard and typical workflow:
alias crosc64='CROSS_COMPILE="ccache aarch64-linux-gnu-" ARCH=arm64 KBUILD_OUTPUT=out/' crosc64 make defconfig
crosc64 make dt_binding_check
Errors:
No rule to make target 'Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.example.dtb', needed by 'dt_binding_check'. Stop.
Please revert/drop from next.
Best regards,
Krzysztof
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 41 lines · Krzysztof Kozlowski
Quoted 23 lines · Masahiro Yamada
Kbuildconventionally uses $(obj)/ for generated files, and $(src)/ for checked-in source files. It is merely a convention without any functional difference. In fact, $(obj) and $(src) are exactly the same, as defined inscripts/Makefile.build:src := $(obj)When the kernel is built in a separate output directory, $(src) does not accurately reflect the source directory location. While
Kbuildresolves this discrepancy by specifying VPATH=$(srctree) to search for source files, it does not cover all cases. For example, when adding a header search path for local headers, -I$(srctree)/$(src) is typically passed to the compiler.This introduces inconsistency between upstream and downstream Makefiles because $(src) is used instead of $(srctree)/$(src) for the latter.
To address this inconsistency, this commit changes the semantics of $(src) so that it always points to the directory in the source tree.
Going forward, the variables used in Makefiles will have the following meanings:
Quoted 8 lines
$(obj) - directory in the object tree $(src) - directory in the source tree (changed by this commit) $(objtree) - the top of the kernel object tree $(srctree) - the top of the kernel source treeConsequently, $(srctree)/$(src) in upstream Makefiles need to be replaced with $(src).
This patch, since yesterday's next, causes build issues with my (completely) standard and typical workflow:
alias crosc64='CROSS_COMPILE="ccache aarch64-linux-gnu-" ARCH=arm64 KBUILD_OUTPUT=out/' crosc64 make defconfig
crosc64 makedt_binding_check
Quoted 5 lines
Errors:
No rule to make target '
Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.example.dtb', needed by 'dt_binding_check'. Stop.Please revert/drop from next.
Or, fix the code.
Now fixed. Thanks for the report.
Signature · 2 lines
Best Regards Masahiro Yamada
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 6 lines · Masahiro Yamada
Or, fix the code.
Now fixed. Thanks for the report.
Hi,
This commit broke my build in a similar way:
make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 M=arch/x86/kvm/ make[1]: Entering directory '/home/rpedgeco/repos/linux-tdx-kvm-out' /home/rpedgeco/repos/linux/scripts/Makefile.build:41: arch/x86/kvm/Makefile: No such file or directory
make[3]: *** No rule to make target 'arch/x86/kvm/Makefile'. Stop. make[2]: *** [/home/rpedgeco/repos/linux/Makefile:1934: arch/x86/kvm] Error 2 make[1]: *** [/home/rpedgeco/repos/linux/Makefile:240: __sub-make] Error 2 make[1]: Leaving directory '/home/rpedgeco/repos/linux-tdx-kvm-out'
make: *** [Makefile:240: __sub-make] Error 2
This patch didn’t fix it:
https://lore.kernel.org/lkml/[email protected]/
But reverting b1992c3772e6 ("kbuild: use $(src) instead of $(srctree)/$(src) for source directory") does.
I'm guess it has something to do with the "M=" option because:
make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 arch/x86/kvm/kvm.ko arch/x86/kvm/kvm-intel.ko
...works.
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 25 lines · Rick P
Quoted 6 lines · Masahiro Yamada
Or, fix the code.
Now fixed. Thanks for the report.
Hi,
This commit broke my build in a similar way:
make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 M=arch/x86/kvm/ make[1]: Entering directory '/home/rpedgeco/repos/linux-tdx-kvm-out'/home/rpedgeco/repos/linux/scripts/Makefile.build:41:arch/x86/kvm/Makefile: No such file or directory
make[3]: *** No rule to make target 'arch/x86/kvm/Makefile'. Stop. make[2]: *** [/home/rpedgeco/repos/linux/Makefile:1934:arch/x86/kvm] Error 2 make[1]: *** [/home/rpedgeco/repos/linux/Makefile:240: __sub-make] Error 2 make[1]: Leaving directory '/home/rpedgeco/repos/linux-tdx-kvm-out'
make: *** [Makefile:240: __sub-make] Error 2This patch didn’t fix it:
https://lore.kernel.org/lkml/[email protected]/
Quoted 8 lines
But reverting
b1992c3772e6("kbuild: use $(src) instead of $(srctree)/$(src) for source directory") does.I'm guess it has something to do with the "M=" option because:
make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36arch/x86/kvm/kvm.koarch/x86/kvm/kvm-intel.ko...works.
There are two solutions, depending on what you want to achieve.
The official way is to pass the absolute path to M= (or relative path to ../linux-tdm-kvm-out)
The other unofficial way is to pass VPATH. The external module build does not officially support the separate output directory, but you can still do it in this case.
[1] will work like before.
[1] Output module objects to linux-tdm-kvm-out/arch/x86/kvm/ (unofficial)
$ make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 M=arch/x86/kvm VPATH=$(pwd)
[2] Output the module objects into arch/x86/kvm/ of the source tree (official)
$ make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 M=$(realpath arch/x86/kvm)
Signature · 2 lines
Best Regards Masahiro Yamada
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 11 lines · Masahiro Yamada
There are two solutions, depending on what you want to achieve.
The official way is to pass the absolute path to M= (or relative path to ../linux-tdm-kvm-out)
The other unofficial way is to pass VPATH. The external module build does not officially support the separate output directory, but you can still do it in this case.
[1] will work like before.
The absolute path worked, but why not make it use the relative path by default in this case? "arch/x86/kvm/" shouldn't be confused with an absolute path...
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 11 lines · Rick Edgecombe
Quoted 10 lines · Masahiro Yamada
There are two solutions, depending on what you want to achieve.
The official way is to pass the absolute path to M= (or relative path to ../linux-tdm-kvm-out)
The other unofficial way is to pass VPATH. The external module build does not officially support the separate output directory, but you can still do it in this case.
Quoted 4 lines
Quoted 1 line
[1] will work like before.
The absolute path worked, but why not make it use the relative path by default in this case? "
arch/x86/kvm/" shouldn't be confused with an absolute path...
Argh, I missed that make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 M=$(realpath arch/x86/kvm) will output the the source tree instead of the output directory.
So there is no official way to build just a module to the output directory? And it just accidentally worked all these years? IMO it's a nice feature to have. I've especially found it useful when doing virtualization development where you need to build/test guest and host kernels as the same time.
Or was it just now delegated to unofficial support after this patch?
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 15 lines · Rick P
Quoted 13 lines · Rick Edgecombe
Quoted 11 lines · Masahiro Yamada
There are two solutions, depending on what you want to achieve.
The official way is to pass the absolute path to M= (or relative path to ../linux-tdm-kvm-out)
The other unofficial way is to pass VPATH. The external module build does not officially support the separate output directory, but you can still do it in this case.
[1] will work like before.
Quoted 7 lines
Quoted 2 lines
The absolute path worked, but why not make it use the relative path by default in this case? "
arch/x86/kvm/" shouldn't be confused with an absolute path...Argh, I missed that make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 M=$(realpath
arch/x86/kvm) will output the the source tree instead of the output directory.So there is no official way to build just a module to the output directory?
You already know how to do it:
#I'm guess it has something to do with the "M=" option because:
#make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36 arch/x86/kvm/kvm.ko #arch/x86/kvm/kvm-intel.ko
#
#...works.
Quoted 6 lines
And
it just accidentally worked all these years? IMO it's a nice feature to have. I've especially found it useful when doing virtualization development where you need to build/test guest and host kernels as the same time.Or was it just now delegated to unofficial support after this patch?
No.
The M= option is intended for building external modules. You just abused it to build the upstream modules.
Kbuild has never supported building external modules in a separate output directory.
"delegated to unofficial support" is a wrong statement, as it has never officially supported in the past.
Your way is a workaround that people found happened to work.
Signature · 2 lines
Best Regards Masahiro Yamada
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 10 lines · Masahiro Yamada
Quoted 1 line
So there is no official way to build just a module to the output directory?
You already know how to do it:
#I'm guess it has something to do with the "M=" option because:
#make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36arch/x86/kvm/kvm.ko#arch/x86/kvm/kvm-intel.ko
#
#...works.
This can build just the module, but not clean just the module.
Quoted 22 lines
Quoted 4 lines
Quoted 8 lines
And
it just accidentally worked all these years? IMO it's a nice feature to have.
I've especially found it useful when doing virtualization development where you
need to build/test guest and host kernels as the same time.Or was it just now delegated to unofficial support after this patch?
No.
The M= option is intended for building external modules. You just abused it to build the upstream modules.
Kbuildhas never supported building external modules in a separate output directory.
Quoted 5 lines
"delegated to unofficial support" is a wrong statement, as it has never officially supported in the past.
Your way is a workaround that people found happened to work.
The main point is that the old behavior was useful. It seems the change that broke my workflow was intended to make it easier to maintain out-of-tree modules? If so then aren't we taking away useful behavior for in-tree module development to help out-of-tree modules?
Can you at least support VPATH method going forward? Although I am surprised I'm the only one that hit this. I assumed this was a common usage.
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
Quoted 41 lines · Rick P
Quoted 10 lines · Masahiro Yamada
Quoted 1 line
So there is no official way to build just a module to the output directory?
You already know how to do it:
#I'm guess it has something to do with the "M=" option because:
#make ARCH=x86_64 O=../linux-tdx-kvm-out/ -j36arch/x86/kvm/kvm.ko#arch/x86/kvm/kvm-intel.ko
#
#...works.This can build just the module, but not clean just the module.
Quoted 26 lines
Quoted 4 lines
Quoted 8 lines
And
it just accidentally worked all these years? IMO it's a nice feature to have.
I've especially found it useful when doing virtualization development where you
need to build/test guest and host kernels as the same time.Or was it just now delegated to unofficial support after this patch?
No.
The M= option is intended for building external modules. You just abused it to build the upstream modules.
Kbuildhas never supported building external modules in a separate output directory."delegated to unofficial support" is a wrong statement, as it has never officially supported in the past.
Quoted 6 lines
Quoted 1 line
Your way is a workaround that people found happened to work.
The main point is that the old behavior was useful. It seems the change that broke my workflow was intended to make it easier to maintain out-of-tree modules? If so then aren't we taking away useful behavior for in-tree module development to help out-of-tree modules?
No. I never meant to prioritize the external module builds.
I believe b1992c3772e69a6fd0e3fc81cd4d2820c8b6eca0 is the right thing to do. That's all.
Quoted 2 lines
Can you at least support VPATH method going forward? Although I am surprised I'm the only one that hit this. I assumed this was a common usage.
VPATH will be broken when a big change happens again for external module builds.
That is what "unsupported" and "unofficial" mean.
Signature · 2 lines
Best Regards Masahiro Yamada
Re: [PATCH v2 4/4] kbuild: use $(src) instead of $(srctree)/$(src) for source directory
In reply to Edgecombe, Rick PQuoted 12 lines · Rick P
Quoted 10 lines · Masahiro Yamada
There are two solutions, depending on what you want to achieve.
The official way is to pass the absolute path to M= (or relative path to ../linux-tdm-kvm-out)
The other unofficial way is to pass VPATH. The external module build does not officially support the separate output directory, but you can still do it in this case.
Quoted 4 lines
Quoted 1 line
[1] will work like before.
The absolute path worked, but why not make it use the relative path by default in this case? "
arch/x86/kvm/" shouldn't be confused with an absolute path...
If you give a relative path to the M= option, it is relative to the top of the build tree, not relative to the top of the source tree.
If you use the relative path correctly, it is interchangeable with the absolute path.
It did not work as you expected because you used it in the wrong way.
Signature · 2 lines
Best Regards Masahiro Yamada