leds: bcm63x8: improve read and write functions
v2 cover leds: bcm63x8: improve read and write functions
This code is proven to work in BMIPS BE/LE and ARM BE/LE. See bcm2835-rng and bcmgenet.c:
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/char/hw_random/bcm2835-rng.c#L42-L60
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/net/ethernet/broadcom/genet/bcmgenet.c#L71-L88
v2: fix comments style.
Álvaro Fernández Rojas (2):
leds: bcm6328: improve write and read functions
leds: bcm6358: improve write and read functions
drivers/leds/leds-bcm6328.c | 26 ++++++++++++++------------ drivers/leds/leds-bcm6358.c | 26 ++++++++++++++------------ 2 files changed, 28 insertions(+), 24 deletions(-)
Signature · 1 line
2.20.1
PATCH v2 1/2 leds: bcm6328: improve write and read functions
This is proven to work in BMIPS BE/LE and ARM BE/LE, as used in bcm2835-rng and bcmgenet drivers.
Both should also be inline functions.
---
v2: Fix comment style.
drivers/leds/leds-bcm6328.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)
drivers/leds/leds-bcm6328.c +14 -12
@@ -75,22 +75,24 @@ struct bcm6328_led {bool active_low; }; -static void bcm6328_led_write (void __iomem *reg,unsigned long data) +static inline void bcm6328_led_write (void __iomem *reg,unsigned long data) { -#ifdef CONFIG_CPU_BIG_ENDIAN -iowrite32be (data, reg); -#else -writel (data, reg); -#endif +/* +* MIPS chips strapped for BE will automagically configure the +* peripheral registers for CPU-native byte order. +*/ +if (IS_ENABLED (CONFIG_MIPS ) &&IS_ENABLED (CONFIG_CPU_BIG_ENDIAN )) +__raw_writel (data, reg); +else +writel_relaxed (data, reg); } -static unsigned long bcm6328_led_read (void __iomem *reg) +static inline unsigned long bcm6328_led_read (void __iomem *reg) { -#ifdef CONFIG_CPU_BIG_ENDIAN -return ioread32be (reg); -#else -return readl (reg); -#endif +if (IS_ENABLED (CONFIG_MIPS ) &&IS_ENABLED (CONFIG_CPU_BIG_ENDIAN )) +return __raw_readl (reg); +else +return readl_relaxed (reg); }/**
Signature · 1 line
2.20.1
Re: [PATCH v2 1/2] leds: bcm6328: improve write and read functions
Quoted 5 lines · Álvaro Fernández Rojas
This is proven to work in BMIPS BE/LE and ARM BE/LE, as used in bcm2835-rng and bcmgenet drivers.
Both should also be inline functions.Signed-off-by Álvaro Fernández Rojas <[email protected]>
Signature · 1 line
Florian
PATCH v2 2/2 leds: bcm6358: improve write and read functions
In reply to Álvaro Fernández RojasThis is proven to work in BMIPS BE/LE and ARM BE/LE, as used in bcm2835-rng and bcmgenet drivers.
Both should also be inline functions.
---
v2: Fix comment style.
drivers/leds/leds-bcm6358.c | 26 ++++++++++++++------------ 1 file changed, 14 insertions(+), 12 deletions(-)
drivers/leds/leds-bcm6358.c +14 -12
@@ -43,22 +43,24 @@ struct bcm6358_led {bool active_low; }; -static void bcm6358_led_write (void __iomem *reg,unsigned long data) +static inline void bcm6358_led_write (void __iomem *reg,unsigned long data) { -#ifdef CONFIG_CPU_BIG_ENDIAN -iowrite32be (data, reg); -#else -writel (data, reg); -#endif +/* +* MIPS chips strapped for BE will automagically configure the +* peripheral registers for CPU-native byte order. +*/ +if (IS_ENABLED (CONFIG_MIPS ) &&IS_ENABLED (CONFIG_CPU_BIG_ENDIAN )) +__raw_writel (data, reg); +else +writel_relaxed (data, reg); } -static unsigned long bcm6358_led_read (void __iomem *reg) +static inline unsigned long bcm6358_led_read (void __iomem *reg) { -#ifdef CONFIG_CPU_BIG_ENDIAN -return ioread32be (reg); -#else -return readl (reg); -#endif +if (IS_ENABLED (CONFIG_MIPS ) &&IS_ENABLED (CONFIG_CPU_BIG_ENDIAN )) +return __raw_readl (reg); +else +return readl_relaxed (reg); }static unsigned long bcm6358_led_busy (void __iomem *mem)
Signature · 1 line
2.20.1
Re: [PATCH v2 2/2] leds: bcm6358: improve write and read functions
Quoted 5 lines · Álvaro Fernández Rojas
This is proven to work in BMIPS BE/LE and ARM BE/LE, as used in bcm2835-rng and bcmgenet drivers.
Both should also be inline functions.Signed-off-by Álvaro Fernández Rojas <[email protected]>
Signature · 1 line
Florian
Quoted 4 lines · Álvaro Fernández Rojas
This code is proven to work in BMIPS BE/LE and ARM BE/LE. See bcm2835-rng and
bcmgenet.c:
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/char/hw_random/bcm2835-rng.c#L42-L60
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/net/ethernet/broadcom/genet/bcmgenet.c#L71-L88
What is the motivation for doing this? bcm2835-rng and bcmgenet are used across MIPS and ARM platforms therefore they need to be compatible with both, but these two LEDs drivers are super specialized, are you working on porting the 6328 LED driver to the newer ARM-based DSL SoCs such as 63138 and 63148?
Signature · 1 line
Florian
Hi Florian,
Quoted 10 lines · Florian Fainelli
Quoted 4 lines · Álvaro Fernández Rojas
This code is proven to work in BMIPS BE/LE and ARM BE/LE. See bcm2835-rng and
bcmgenet.c:
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/char/hw_random/bcm2835-rng.c#L42-L60
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/net/ethernet/broadcom/genet/bcmgenet.c#L71-L88
Quoted 5 lines
What is the motivation for doing this? bcm2835-rng and bcmgenet are used across MIPS and ARM platforms therefore they need to be compatible with both, but these two LEDs drivers are super specialized, are you working on porting the 6328 LED driver to the newer ARM-based DSL SoCs such as 63138 and 63148?
I just wanted to have all bmips drivers in line (at least regarding read/write).
If I remember correctly someone told me that this controller was also present on some little endian SoCs, but you can confirm that :). Unfortunately I haven’t got any devices with ARM-based DSL SoCs, so the answer is no.
Quoted 2 lines
Signature · 1 line
Florian
Best regards,
Álvaro.
Quoted 18 lines · Álvaro Fernández Rojas
Hi Florian,
Quoted 10 lines · Florian Fainelli
Quoted 4 lines · Álvaro Fernández Rojas
This code is proven to work in BMIPS BE/LE and ARM BE/LE. See bcm2835-rng and
bcmgenet.c:
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/char/hw_random/bcm2835-rng.c#L42-L60
https://github.com/torvalds/linux/blob/3b9cdafb5358eb9f3790de2f728f765fef100731/drivers/net/ethernet/broadcom/genet/bcmgenet.c#L71-L88Quoted 5 lines
What is the motivation for doing this? bcm2835-rng and bcmgenet are used across MIPS and ARM platforms therefore they need to be compatible with both, but these two LEDs drivers are super specialized, are you working on porting the 6328 LED driver to the newer ARM-based DSL SoCs such as 63138 and 63148?
Quoted 3 lines
I just wanted to have all bmips drivers in line (at least regarding read/write).
If I remember correctly someone told me that this controller was also present on some little endian SoCs, but you can confirm that :). Unfortunately I haven’t got any devices with ARM-based DSL SoCs, so the answer is no.
The 6328 LED controller could be utilized on the ARM-based DSL SoCs, however 6358 will not, so changing the I/O accessors for that driver sounds like just code churn to me.
Signature · 1 line
Florian