luckfox-lyra-plus: add
PATCH 1/1 luckfox-lyra-plus: add
The Luckfox Lyra Plus is ultra-small, tri-core single board computer based on the Rockchip RK3506G2, with a very compact form factor.
--- README | 1 + conf/machine/include/rk3506.inc | 20 +++++++++++++ conf/machine/include/rk3568.inc | 1 - conf/machine/include/rk3588s.inc | 1 - conf/machine/luckfox-lyra-plus.conf | 27 +++++++++++++++++ recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb | 9 ++++++ .../rkbin/rockchip-rkbin-optee-os_git.bb | 5 ++++ recipes-bsp/rkbin/rockchip-rkbin.inc | 1 + recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ recipes-bsp/u-boot/u-boot_%.bbappend | 4 +++ recipes-kernel/linux/linux-armbian_git.bb | 29 +++++++++++++++++++ 11 files changed, 98 insertions(+), 2 deletions(-) create mode 100644 conf/machine/include/rk3506.inc create mode 100644 conf/machine/luckfox-lyra-plus.conf create mode 100644 recipes-kernel/linux/linux-armbian_git.bb
README +1 -0
@@ -23,6 +23,7 @@ Status of supported boards: tinker-board tinker-board-s vyasa-rk3288 + luckfox-lyra-plus 64-bit: nanopi-m4
conf/machine/include/rk3506.inc new file +20 -0
@@ -0,0 +1,20 @@ +MACHINEOVERRIDES =. "rk3506:" +SOC_FAMILY = "rk3506" +DEFAULTTUNE = "cortexa7thf-neon-vfpv4" + +ROCKCHIP_CLOSED_TPL ?= "1" + +require conf/machine/include/soc-family.inc +require conf/machine/include/rockchip-defaults.inc +require conf/machine/include/arm/armv7a/tune-cortexa7.inc +require conf/machine/include/rockchip-wic.inc + +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin-optee-os" + +KBUILD_DEFCONFIG ?= "rk3506_defconfig" +KERNEL_CLASSES = "kernel-fitimage" +KERNEL_IMAGETYPE ?= "fitImage" + +UBOOT_SUFFIX ?= "itb" +UBOOT_ENTRYPOINT ?= "0x02800000" +UBOOT_EXTLINUX_FDT = "${@bb.utils.contains('KERNEL_IMAGETYPE', 'fitImage', '', '/boot', d)}"
conf/machine/include/rk3568.inc +0 -1
@@ -10,7 +10,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3568 = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc" KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"
conf/machine/include/rk3588s.inc +0 -1
@@ -9,7 +9,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3588s = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc" KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"
conf/machine/luckfox-lyra-plus.conf new file +27 -0
@@ -0,0 +1,27 @@ +#@TYPE: Machine +#@NAME: Luckfox Lyra Plus +#@DESCRIPTION: RK3506G2 based Linux Micro Development Board +#https://www.luckfox.com/Luckfox-Lyra-Plus + +require conf/machine/include/rk3506.inc + +KERNEL_DEVICETREE ?= "rk3506g-luckfox-lyra-plus-sd.dtb" +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" +PREFERRED_PROVIDER_virtual/kernel = "linux-armbian" +EXTERNAL_KERNEL_DEVICETREE = "${DEPLOY_DIR_IMAGE}/devicetree" + +UBOOT_MACHINE = "luckfox-lyra-rk3506_defconfig" + +MACHINE_FEATURES = " \ + rtc \ + screen \ + serial \ + usbgadget \ + usbhost \ + vfat \ +" + +KERNEL_FEATURES += " \ + cfg/fs/ext4.scc \ + features/cgroups/cgroups.scc \ +"
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +9 -0
@@ -10,6 +10,15 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3308.bin } +DDRBIN_VERS:rk3506 ?= "v1.02" +DDRBIN_FILE:rk3506 ?= "rk3506_ddr_750MHz_${DDRBIN_VERS}.bin" + +do_deploy:rk3506() { + # Prebuilt U-Boot TPL (DDR init) + install -m 644 ${S}/bin/rk35/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3506.bin + install -m 644 ${S}/bin/rk35/rk3506_tee_v1.23.bin ${DEPLOYDIR}/tee-rk3506.bin +} + DDRBIN_VERS:rk3566 ?= "v1.23" DDRBIN_FILE:rk3566 ?= "rk3566_ddr_1056MHz_${DDRBIN_VERS}.bin"
recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb +5 -0
@@ -9,6 +9,11 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/rk3308_bl32_v*.bin ${DEPLOYDIR}/tee-rk3308.bin } +do_deploy:rk3506() { + # Prebuilt OPTEE-OS + install -m 644 ${S}/bin/rk35/rk3506_tee_v*.bin ${DEPLOYDIR}/tee-rk3506.bin +} + # NOTE: the following are not typos # the rk3566 uses the same bl32 as the rk3568 do_deploy:rk3566() {
recipes-bsp/rkbin/rockchip-rkbin.inc +1 -0
@@ -11,6 +11,7 @@ S = "${WORKDIR}/git" COMPATIBLE_MACHINE = "^$" COMPATIBLE_MACHINE:rk3308 = "rk3308" +COMPATIBLE_MACHINE:rk3506 = "rk3506" COMPATIBLE_MACHINE:rk3566 = "rk3566" COMPATIBLE_MACHINE:rk3568 = "rk3568" COMPATIBLE_MACHINE:rk3588s = "rk3588s"
recipes-bsp/u-boot/u-boot-rockchip.inc +2 -0
@@ -11,7 +11,9 @@ do_compile[depends] .= "${TFA_DEPENDS}" ROCKCHIP_TPL:closed-tpl = "${DEPLOY_DIR_IMAGE}/ddr-${SOC_FAMILY}.bin" # SOC_FAMILY for RK3588S is rk3588s but it should use the binaries from rk3588 ROCKCHIP_TPL:closed-tpl:rk3588s = "${DEPLOY_DIR_IMAGE}/ddr-rk3588.bin" +ROCKCHIP_TEE:closed-tpl:rk3506 = "${DEPLOY_DIR_IMAGE}/tee-rk3506.bin" EXTRA_OEMAKE:append:closed-tpl = " ROCKCHIP_TPL=${ROCKCHIP_TPL}" +EXTRA_OEMAKE:append:closed-tpl:rk3506 = " TEE=${ROCKCHIP_TEE}" INIT_FIRMWARE_DEPENDS ??= "" INIT_FIRMWARE_DEPENDS:closed-tpl = " rockchip-rkbin-ddr:do_deploy"
recipes-bsp/u-boot/u-boot_%.bbappend +4 -0
@@ -8,6 +8,10 @@ DEPENDS:append:rk3308 = " u-boot-tools-native" DEPENDS:append:rock-pi-4 = " gnutls-native" DEPENDS:append:rk-u-boot-env = " u-boot-mkenvimage-native" +BRANCH:luckfox-lyra-plus = "rk3506" +SRC_URI:luckfox-lyra-plus = "git://source.denx.de/u-boot/contributors/kwiboo/u-boot.git;protocol=https;branch=${BRANCH}" +SRCREV:luckfox-lyra-plus = "c6782a37feee4a8aee08d321c01b4ca0b0562f0b" + do_compile:append:rock2-square () { # copy to default search path if [ "${SPL_BINARY}" = "u-boot-spl-dtb.bin" ]; then
recipes-kernel/linux/linux-armbian_git.bb new file +29 -0
@@ -0,0 +1,29 @@ +FILESEXTRAPATHS:prepend := "${THISDIR}/files:" + +DESCRIPTION = "Linux Kernel" +SECTION = "kernel" +LICENSE = "GPL-2.0-only" +LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46" + +LINUX_VERSION = "6.1.115" +KBRANCH = "rk-6.1-rkr5.1" +SRCREV_kernel = "b908c7339f51eddcfe8402cd15d1e1f8f4e67c29" +SRCREV_yocto-meta = "7545dc5bc77560f4b1b6efc47b56e953dc86572d" +PV = "${LINUX_VERSION}" + +SRC_URI = " \ + git://github.com/armbian/linux-rockchip.git;name=kernel;protocol=https;branch=${KBRANCH} \ + git://git.yoctoproject.org/yocto-kernel-cache;type=kmeta;name=yocto-meta;branch=yocto-6.1;destsuffix=kernel-meta;protocol=https \ +" + +DEPENDS += "lzop-native" +FIT_KERNEL_COMP_ALG ?= "lzo" +FIT_KERNEL_COMP_ALG_EXTENSION ?= ".lzo" + +COMPATIBLE_MACHINE:luckfox-lyra-plus = "luckfox-lyra-plus" + +inherit kernel +inherit kernel-yocto +require recipes-kernel/linux/linux-yocto.inc + +INSANE_SKIP:${PN}-src += "buildpaths"
Hi Marcin,
Quoted 28 lines · Marcin Bober via lists.yoctoproject.org
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
The Luckfox Lyra Plus is ultra-small, tri-core single board computer based on the Rockchip RK3506G2, with a very compact form factor.
Signed-off-by Marcin Bober <[email protected]>--- README | 1 + conf/machine/include/rk3506.inc | 20 +++++++++++++ conf/machine/include/rk3568.inc | 1 - conf/machine/include/rk3588s.inc | 1 - conf/machine/luckfox-lyra-plus.conf | 27 +++++++++++++++++ recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb | 9 ++++++ .../rkbin/rockchip-rkbin-optee-os_git.bb | 5 ++++ recipes-bsp/rkbin/rockchip-rkbin.inc | 1 + recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ recipes-bsp/u-boot/u-boot_%.bbappend | 4 +++ recipes-kernel/linux/linux-armbian_git.bb | 29 +++++++++++++++++++ 11 files changed, 98 insertions(+), 2 deletions(-)create mode 100644 conf/machine/include/rk3506.inc create mode 100644
conf/machine/luckfox-lyra-plus.confcreate mode 100644 recipes-kernel/linux/linux-armbian_git.bbREADME +0
-0
README Status of supported boards: · line 26
Quoted 4 lines
README +1
-0@@ -23,6 +23,7 @@ Status of supported boards: tinker-board tinker-board-s vyasa-rk3288 + luckfox-lyra-plus
Please keep the list ordered alphabetically.
Quoted 12 lines
README +0
-064-bit: nanopi-m4conf/machine/include/rk3506.inc new file +3
-0@@ -0,0 +1,20 @@ +MACHINEOVERRIDES =. "rk3506:" +SOC_FAMILY = "rk3506" +DEFAULTTUNE = "cortexa7thf-neon-vfpv4"
conf/machine/include/rk3506.inc line 13
Quoted 10 lines
conf/machine/include/rk3506.inc new file +10
-0+ +ROCKCHIP_CLOSED_TPL ?= "1" + +require conf/machine/include/soc-family.inc +require conf/machine/include/rockchip-defaults.inc +require conf/machine/include/arm/armv7a/tune-cortexa7.inc +require conf/machine/include/rockchip-wic.inc + +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin-optee-os" +
Ooooh, I believe this would mean OP-TEE OS blob from Rockchip can be used with upstream U-Boot? Have you actually tried? This would be interesting for me for https://lore.kernel.org/yocto-patches/[email protected]/ to check if I got it right for rockchip-rkbin-optee-os as well.
Is OP-TEE OS *required* on rk3506 to be able to boot? Do you know?
Essentially, with the patch series listed above applied, you would need to set RK_UBOOT_TEE = "1" and then U-Boot would automatically add the necessary dependency and add the correct filepath to the TEE environment variable.
conf/machine/include/rk3506.inc line 14
Quoted 1 line
conf/machine/include/rk3506.inc new file +1
-0+KBUILD_DEFCONFIG ?= "rk3506_defconfig"
Usually we would rather have multi_v7_defconfig and if needed apply .scc+.cfg config fragments (see what's been done for nanopi-r4s).
conf/machine/include/rk3506.inc line 17
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+KERNEL_CLASSES = "kernel-fitimage" +KERNEL_IMAGETYPE ?= "fitImage" +
Isn't a FIT image the default when you include rockchip-defaults? See RK_KERNEL_FITIMAGE variable.
conf/machine/include/rk3506.inc line 20
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+UBOOT_SUFFIX ?= "itb" +UBOOT_ENTRYPOINT ?= "0x02800000" +UBOOT_EXTLINUX_FDT = "${@bb.utils.contains('KERNEL_IMAGETYPE', 'fitImage', '', '/boot', d)}"
isn't that already handled with RK_KERNEL_FITIMAGE from within conf/machine/include/rockchip-extlinux.inc (you may then want to require this file).
conf/machine/include/rk3568.inc require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc · line 13
Quoted 9 lines
conf/machine/include/rk3568.inc +0
-1@@ -10,7 +10,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3568 = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc"
This has nothing to do with adding support for this new device no?
conf/machine/include/rk3588s.inc require conf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc · line 12
Quoted 12 lines
conf/machine/include/rk3568.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"conf/machine/include/rk3588s.inc +0
-1@@ -9,7 +9,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3588s = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc"
This has nothing to do with adding support for this new device no?
Quoted 9 lines
conf/machine/include/rk3588s.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"conf/machine/luckfox-lyra-plus.conf new file +0
-0
conf/machine/luckfox-lyra-plus.conf line 10
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf new file +10
-0@@ -0,0 +1,27 @@ +#@TYPE: Machine +#@NAME: Luckfox Lyra Plus +#@DESCRIPTION: RK3506G2 based Linux Micro Development Board +#https://www.luckfox.com/Luckfox-Lyra-Plus + +require conf/machine/include/rk3506.inc + +KERNEL_DEVICETREE ?= "rk3506g-luckfox-lyra-plus-sd.dtb" +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" +PREFERRED_PROVIDER_virtual/kernel = "linux-armbian"
I believe we only take boards which are supported by linux-yocto or linux-yocto-dev from the master branch of OE-Core. I don't even see patches on the linux-rockchip mailing list
Quoted 7 lines
conf/machine/luckfox-lyra-plus.conf new file +7
-0+EXTERNAL_KERNEL_DEVICETREE = "${DEPLOY_DIR_IMAGE}/devicetree" + +UBOOT_MACHINE = "luckfox-lyra-rk3506_defconfig" + +MACHINE_FEATURES = " \ + rtc \ + screen \
conf/machine/luckfox-lyra-plus.conf line 27
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf new file +10
-0+ serial \ + usbgadget \ + usbhost \ + vfat \ +" + +KERNEL_FEATURES += " \ + cfg/fs/ext4.scc \ + features/cgroups/cgroups.scc \ +"
KERNEL_FEATURES must be listed in the kernel recipe not in the machine.
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 12
Quoted 8 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +0
-0@@ -10,6 +10,15 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3308.bin }
Wait.... This doesn't exist anymore. Against which branch did you develop this patch?
The master branch has a completely different mechanism which is much more automatic than what's needed below.
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 19
Quoted 7 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +7
-0+DDRBIN_VERS:rk3506 ?= "v1.02" +DDRBIN_FILE:rk3506 ?= "rk3506_ddr_750MHz_${DDRBIN_VERS}.bin" + +do_deploy:rk3506() { + # Prebuilt U-Boot TPL (DDR init) + install -m 644 ${S}/bin/rk35/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3506.bin + install -m 644 ${S}/bin/rk35/rk3506_tee_v1.23.bin ${DEPLOYDIR}/tee-rk3506.bin
This is TEE, not DRAM init blob so shouldn't be deployed in this recipe.
Quoted 37 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +2
-0+} +> DDRBIN_VERS:rk3566 ?= "v1.23" DDRBIN_FILE:rk3566 ?= "rk3566_ddr_1056MHz_${DDRBIN_VERS}.bin"recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb +5
-0@@ -9,6 +9,11 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/rk3308_bl32_v*.bin ${DEPLOYDIR}/tee-rk3308.bin } +do_deploy:rk3506() { + # Prebuilt OPTEE-OS + install -m 644 ${S}/bin/rk35/rk3506_tee_v*.bin ${DEPLOYDIR}/tee-rk3506.bin +} + # NOTE: the following are not typos # the rk3566 uses the same bl32 as the rk3568 do_deploy:rk3566() {recipes-bsp/rkbin/rockchip-rkbin.inc +1
-0@@ -11,6 +11,7 @@ S = "${WORKDIR}/git" COMPATIBLE_MACHINE = "^$" COMPATIBLE_MACHINE:rk3308 = "rk3308" +COMPATIBLE_MACHINE:rk3506 = "rk3506" COMPATIBLE_MACHINE:rk3566 = "rk3566" COMPATIBLE_MACHINE:rk3568 = "rk3568" COMPATIBLE_MACHINE:rk3588s = "rk3588s"recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0
recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 17
Quoted 7 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +2
-0@@ -11,7 +11,9 @@ do_compile[depends] .= "${TFA_DEPENDS}" ROCKCHIP_TPL:closed-tpl = "${DEPLOY_DIR_IMAGE}/ddr-${SOC_FAMILY}.bin" # SOC_FAMILY for RK3588S is rk3588s but it should use the binaries from rk3588 ROCKCHIP_TPL:closed-tpl:rk3588s = "${DEPLOY_DIR_IMAGE}/ddr-rk3588.bin" +ROCKCHIP_TEE:closed-tpl:rk3506 = "${DEPLOY_DIR_IMAGE}/tee-rk3506.bin" EXTRA_OEMAKE:append:closed-tpl = " ROCKCHIP_TPL=${ROCKCHIP_TPL}" +EXTRA_OEMAKE:append:closed-tpl:rk3506 = " TEE=${ROCKCHIP_TEE}"
I think you only want
ROCKCHIP_TEE:rk3506
and
EXTRA_OEMAKE:append:rk3506
as I believe TEE has nothing to do with whether we're using a DRAM init blob?
Also, this isn't working because you forgot to add the dependency on optee-os (see do_compile[depends] .= "${TFA_DEPENDS}" for how we have the dependency for trsuted-firmware-a on Aarch64).
Quoted 7 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0INIT_FIRMWARE_DEPENDS ??= "" INIT_FIRMWARE_DEPENDS:closed-tpl = " rockchip-rkbin-ddr:do_deploy"recipes-bsp/u-boot/u-boot_%.bbappend +0
-0
recipes-bsp/u-boot/u-boot_%.bbappend DEPENDS:append:rk3308 = " u-boot-tools-native" · line 14
Quoted 7 lines
recipes-bsp/u-boot/u-boot_%.bbappend +4
-0@@ -8,6 +8,10 @@ DEPENDS:append:rk3308 = " u-boot-tools-native" DEPENDS:append:rock-pi-4 = " gnutls-native" DEPENDS:append:rk-u-boot-env = " u-boot-mkenvimage-native" +BRANCH:luckfox-lyra-plus = "rk3506" +SRC_URI:luckfox-lyra-plus = "git://source.denx.de/u-boot/contributors/kwiboo/u-boot.git;protocol=https;branch=${BRANCH}" +SRCREV:luckfox-lyra-plus = "c6782a37feee4a8aee08d321c01b4ca0b0562f0b" +
That's a BIG no-no.
Have a separate recipe for this.
Knowing Jonas, there are chances this branch will get rebased, so I don't think we want this at all.
I see patches on the U-Boot mailing list for RK3506 support in U-Boot, see https://lore.kernel.org/u-boot/[email protected]/ and Jonas "promised" a v2. Maybe work with him on getting the v2 sent upstream?
recipes-kernel/linux/linux-armbian_git.bb
Quoted 8 lines
recipes-bsp/u-boot/u-boot_%.bbappend +0
-0do_compile:append:rock2-square () { # copy to default search path if [ "${SPL_BINARY}" = "u-boot-spl-dtb.bin" ]; thenrecipes-kernel/linux/linux-armbian_git.bb new file +0
-0
I'll let Trevor speak his mind here but I don't think Armbian Linux kernel is something we're interested in supporting. Work with upstream to get the board supported in upstream Linux and then we can have it here.
Cheers,
Quentin
Thank you, Quentin, for your thorough review!
Quoted 122 lines · Quentin Schulz via lists.yoctoproject.org
Hi Marcin,
Quoted 28 lines · Marcin Bober via lists.yoctoproject.org
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
The Luckfox Lyra Plus is ultra-small, tri-core single board computer based on the Rockchip RK3506G2, with a very compact form factor.
Signed-off-by Marcin Bober <[email protected]>--- README | 1 + conf/machine/include/rk3506.inc | 20 +++++++++++++ conf/machine/include/rk3568.inc | 1 - conf/machine/include/rk3588s.inc | 1 - conf/machine/luckfox-lyra-plus.conf | 27 +++++++++++++++++ recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb | 9 ++++++ .../rkbin/rockchip-rkbin-optee-os_git.bb | 5 ++++ recipes-bsp/rkbin/rockchip-rkbin.inc | 1 + recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ recipes-bsp/u-boot/u-boot_%.bbappend | 4 +++ recipes-kernel/linux/linux-armbian_git.bb | 29 +++++++++++++++++++ 11 files changed, 98 insertions(+), 2 deletions(-)create mode 100644 conf/machine/include/rk3506.inc create mode 100644
conf/machine/luckfox-lyra-plus.confcreate mode 100644 recipes-kernel/linux/linux-armbian_git.bbREADME +0
-0README Status of supported boards: · line 26
Quoted 4 lines
README +1
-0@@ -23,6 +23,7 @@ Status of supported boards: tinker-board tinker-board-s vyasa-rk3288 + luckfox-lyra-plusPlease keep the list ordered alphabetically.
Quoted 12 lines
README +0
-064-bit: nanopi-m4conf/machine/include/rk3506.inc new file +3
-0@@ -0,0 +1,20 @@ +MACHINEOVERRIDES =. "rk3506:" +SOC_FAMILY = "rk3506" +DEFAULTTUNE = "cortexa7thf-neon-vfpv4"conf/machine/include/rk3506.inc line 13
Quoted 10 lines
conf/machine/include/rk3506.inc new file +10
-0+ +ROCKCHIP_CLOSED_TPL ?= "1" + +require conf/machine/include/soc-family.inc +require conf/machine/include/rockchip-defaults.inc +require conf/machine/include/arm/armv7a/tune-cortexa7.inc +require conf/machine/include/rockchip-wic.inc + +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin-optee-os" +Ooooh, I believe this would mean OP-TEE OS blob from Rockchip can be used with upstream U-Boot? Have you actually tried? This would be interesting for me for https://lore.kernel.org/yocto-patches/[email protected]/
to check if I got it right for rockchip-rkbin-optee-os as well.Is OP-TEE OS *required* on rk3506 to be able to boot? Do you know?
Essentially, with the patch series listed above applied, you would need to set
RK_UBOOT_TEE= "1" and then U-Boot would automatically add the necessary dependency and add the correct filepath to the TEE environment variable.conf/machine/include/rk3506.inc line 14
Quoted 1 line
conf/machine/include/rk3506.inc new file +1
-0+KBUILD_DEFCONFIG ?= "rk3506_defconfig"Usually we would rather have
multi_v7_defconfigand if needed apply .scc+.cfg config fragments (see what's been done for nanopi-r4s).conf/machine/include/rk3506.inc line 17
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+KERNEL_CLASSES = "kernel-fitimage" +KERNEL_IMAGETYPE ?= "fitImage" +Isn't a FIT image the default when you include rockchip-defaults? See
RK_KERNEL_FITIMAGEvariable.conf/machine/include/rk3506.inc line 20
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+UBOOT_SUFFIX ?= "itb" +UBOOT_ENTRYPOINT ?= "0x02800000" +UBOOT_EXTLINUX_FDT = "${@bb.utils.contains('KERNEL_IMAGETYPE', 'fitImage', '', '/boot', d)}"isn't that already handled with
RK_KERNEL_FITIMAGEfrom within conf/machine/include/rockchip-extlinux.inc (you may then want to require this file).conf/machine/include/rk3568.inc require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc · line 13
Quoted 9 lines
conf/machine/include/rk3568.inc +0
-1@@ -10,7 +10,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3568 = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc"This has nothing to do with adding support for this new device no?
conf/machine/include/rk3588s.inc require conf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc · line 12
Quoted 12 lines
conf/machine/include/rk3568.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"conf/machine/include/rk3588s.inc +0
-1@@ -9,7 +9,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3588s = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc"This has nothing to do with adding support for this new device no?
Quoted 3 lines
conf/machine/include/rk3588s.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf line 4
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf new file +4
-0@@ -0,0 +1,27 @@ +#@TYPE: Machine +#@NAME: Luckfox Lyra Plus +#@DESCRIPTION: RK3506G2 based Linux Micro Development Board +#https://www.luckfox.com/Luckfox-Lyra-Plus
Usually I would be excited about a tiny rockchip-based SBC with hardwired ethernet. But a new SoC based on CortexA7 (i.e. 32-bit)?? And no SDcard?
Hopefully someone comes out with something new to replace the zero-3e which appears to be out of production.
Quoted 142 lines
conf/machine/luckfox-lyra-plus.conf line 10
Quoted 6 lines
conf/machine/luckfox-lyra-plus.conf new file +6
-0+ +require conf/machine/include/rk3506.inc + +KERNEL_DEVICETREE ?= "rk3506g-luckfox-lyra-plus-sd.dtb" +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" +PREFERRED_PROVIDER_virtual/kernel = "linux-armbian"I believe we only take boards which are supported by linux-yocto or linux-yocto-dev from the master branch of OE-Core. I don't even see patches on the linux-rockchip mailing list
Quoted 7 lines
conf/machine/luckfox-lyra-plus.conf new file +7
-0+EXTERNAL_KERNEL_DEVICETREE = "${DEPLOY_DIR_IMAGE}/devicetree" + +UBOOT_MACHINE = "luckfox-lyra-rk3506_defconfig" + +MACHINE_FEATURES = " \ + rtc \ + screen \conf/machine/luckfox-lyra-plus.conf line 27
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf new file +10
-0+ serial \ + usbgadget \ + usbhost \ + vfat \ +" + +KERNEL_FEATURES += " \ + cfg/fs/ext4.scc \ + features/cgroups/cgroups.scc \ +"
KERNEL_FEATURESmust be listed in the kernel recipe not in the machine.recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 12
Quoted 8 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +0
-0@@ -10,6 +10,15 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3308.bin }Wait.... This doesn't exist anymore. Against which branch did you develop this patch?
The master branch has a completely different mechanism which is much more automatic than what's needed below.
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 19
Quoted 7 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +7
-0+DDRBIN_VERS:rk3506 ?= "v1.02" +DDRBIN_FILE:rk3506 ?= "rk3506_ddr_750MHz_${DDRBIN_VERS}.bin" + +do_deploy:rk3506() { + # Prebuilt U-Boot TPL (DDR init) + install -m 644 ${S}/bin/rk35/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3506.bin + install -m 644 ${S}/bin/rk35/rk3506_tee_v1.23.bin ${DEPLOYDIR}/tee-rk3506.binThis is TEE, not DRAM init blob so shouldn't be deployed in this recipe.
Quoted 37 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +2
-0+} +> DDRBIN_VERS:rk3566 ?= "v1.23" DDRBIN_FILE:rk3566 ?= "rk3566_ddr_1056MHz_${DDRBIN_VERS}.bin"recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb +5
-0@@ -9,6 +9,11 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/rk3308_bl32_v*.bin ${DEPLOYDIR}/tee-rk3308.bin } +do_deploy:rk3506() { + # Prebuilt OPTEE-OS + install -m 644 ${S}/bin/rk35/rk3506_tee_v*.bin ${DEPLOYDIR}/tee-rk3506.bin +} + # NOTE: the following are not typos # the rk3566 uses the same bl32 as the rk3568 do_deploy:rk3566() {recipes-bsp/rkbin/rockchip-rkbin.inc +1
-0@@ -11,6 +11,7 @@ S = "${WORKDIR}/git" COMPATIBLE_MACHINE = "^$" COMPATIBLE_MACHINE:rk3308 = "rk3308" +COMPATIBLE_MACHINE:rk3506 = "rk3506" COMPATIBLE_MACHINE:rk3566 = "rk3566" COMPATIBLE_MACHINE:rk3568 = "rk3568" COMPATIBLE_MACHINE:rk3588s = "rk3588s"recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 17
Quoted 7 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +2
-0@@ -11,7 +11,9 @@ do_compile[depends] .= "${TFA_DEPENDS}" ROCKCHIP_TPL:closed-tpl = "${DEPLOY_DIR_IMAGE}/ddr-${SOC_FAMILY}.bin" # SOC_FAMILY for RK3588S is rk3588s but it should use the binaries from rk3588 ROCKCHIP_TPL:closed-tpl:rk3588s = "${DEPLOY_DIR_IMAGE}/ddr-rk3588.bin" +ROCKCHIP_TEE:closed-tpl:rk3506 = "${DEPLOY_DIR_IMAGE}/tee-rk3506.bin" EXTRA_OEMAKE:append:closed-tpl = " ROCKCHIP_TPL=${ROCKCHIP_TPL}" +EXTRA_OEMAKE:append:closed-tpl:rk3506 = " TEE=${ROCKCHIP_TEE}"I think you only want
ROCKCHIP_TEE:rk3506
and
EXTRA_OEMAKE:append:rk3506
as I believe TEE has nothing to do with whether we're using a DRAM init blob?
Also, this isn't working because you forgot to add the dependency on optee-os (see do_compile[depends] .= "${TFA_DEPENDS}" for how we have the dependency for trsuted-firmware-a on Aarch64).
Quoted 7 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0INIT_FIRMWARE_DEPENDS ??= "" INIT_FIRMWARE_DEPENDS:closed-tpl = " rockchip-rkbin-ddr:do_deploy"recipes-bsp/u-boot/u-boot_%.bbappend +0
-0recipes-bsp/u-boot/u-boot_%.bbappend DEPENDS:append:rk3308 = " u-boot-tools-native" · line 14
Quoted 7 lines
recipes-bsp/u-boot/u-boot_%.bbappend +4
-0@@ -8,6 +8,10 @@ DEPENDS:append:rk3308 = " u-boot-tools-native" DEPENDS:append:rock-pi-4 = " gnutls-native" DEPENDS:append:rk-u-boot-env = " u-boot-mkenvimage-native" +BRANCH:luckfox-lyra-plus = "rk3506" +SRC_URI:luckfox-lyra-plus = "git://source.denx.de/u-boot/contributors/kwiboo/u-boot.git;protocol=https;branch=${BRANCH}" +SRCREV:luckfox-lyra-plus = "c6782a37feee4a8aee08d321c01b4ca0b0562f0b" +That's a BIG no-no.
Have a separate recipe for this.
Knowing Jonas, there are chances this branch will get rebased, so I don't think we want this at all.
I see patches on the U-Boot mailing list for RK3506 support in U-Boot, see
https://lore.kernel.org/u-boot/[email protected]/ and Jonas "promised" a v2. Maybe work with him on getting the v2 sent upstream?
Quoted 12 lines
recipes-kernel/linux/linux-armbian_git.bb
Quoted 8 lines
recipes-bsp/u-boot/u-boot_%.bbappend +0
-0do_compile:append:rock2-square () { # copy to default search path if [ "${SPL_BINARY}" = "u-boot-spl-dtb.bin" ]; thenrecipes-kernel/linux/linux-armbian_git.bb new file +0
-0I'll let Trevor speak his mind here but I don't think Armbian Linux kernel is something we're interested in supporting. Work with upstream to get the board supported in upstream Linux and then we can have it here.
I agree with Quentin's assessment. If rockchip were a platform that had little or no upstream support then we would need to have all sorts of recipes for bootloaders and kernels from wherever we could find them. But with rockchip, upstream support is usually just a matter of time. I'll take new machines if they're in linux-yocto-dev, but would rather stay away from vendor kernels.
If a board is wildly popular and will never have upstream support then I would consider it. But if Jonas is already working on it, then we will probably see upstream support shortly.
Quoted 13 lines
Cheers,
Quentin-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#3129): https://lists.yoctoproject.org/g/yocto-patches/message/3129
Mute This Topic: https://lists.yoctoproject.org/mt/117496463/900817
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto-patches/leave/13168745/900817/63955952/xyzzy [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 125 lines · Trevor Woerner via lists.yoctoproject.org
Thank you, Quentin, for your thorough review!
Quoted 122 lines · Quentin Schulz via lists.yoctoproject.org
Hi Marcin,
Quoted 28 lines · Marcin Bober via lists.yoctoproject.org
[You don't often get email from [email protected]. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
The Luckfox Lyra Plus is ultra-small, tri-core single board computer based on the Rockchip RK3506G2, with a very compact form factor.
Signed-off-by Marcin Bober <[email protected]>--- README | 1 + conf/machine/include/rk3506.inc | 20 +++++++++++++ conf/machine/include/rk3568.inc | 1 - conf/machine/include/rk3588s.inc | 1 - conf/machine/luckfox-lyra-plus.conf | 27 +++++++++++++++++ recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb | 9 ++++++ .../rkbin/rockchip-rkbin-optee-os_git.bb | 5 ++++ recipes-bsp/rkbin/rockchip-rkbin.inc | 1 + recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ recipes-bsp/u-boot/u-boot_%.bbappend | 4 +++ recipes-kernel/linux/linux-armbian_git.bb | 29 +++++++++++++++++++ 11 files changed, 98 insertions(+), 2 deletions(-)create mode 100644 conf/machine/include/rk3506.inc create mode 100644
conf/machine/luckfox-lyra-plus.confcreate mode 100644 recipes-kernel/linux/linux-armbian_git.bbREADME +0
-0README Status of supported boards: · line 26
Quoted 4 lines
README +1
-0@@ -23,6 +23,7 @@ Status of supported boards: tinker-board tinker-board-s vyasa-rk3288 + luckfox-lyra-plusPlease keep the list ordered alphabetically.
Quoted 12 lines
README +0
-064-bit: nanopi-m4conf/machine/include/rk3506.inc new file +3
-0@@ -0,0 +1,20 @@ +MACHINEOVERRIDES =. "rk3506:" +SOC_FAMILY = "rk3506" +DEFAULTTUNE = "cortexa7thf-neon-vfpv4"conf/machine/include/rk3506.inc line 13
Quoted 10 lines
conf/machine/include/rk3506.inc new file +10
-0+ +ROCKCHIP_CLOSED_TPL ?= "1" + +require conf/machine/include/soc-family.inc +require conf/machine/include/rockchip-defaults.inc +require conf/machine/include/arm/armv7a/tune-cortexa7.inc +require conf/machine/include/rockchip-wic.inc + +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin-optee-os" +Ooooh, I believe this would mean OP-TEE OS blob from Rockchip can be used with upstream U-Boot? Have you actually tried? This would be interesting for me for https://lore.kernel.org/yocto-patches/[email protected]/
to check if I got it right for rockchip-rkbin-optee-os as well.Is OP-TEE OS *required* on rk3506 to be able to boot? Do you know?
Essentially, with the patch series listed above applied, you would need to set
RK_UBOOT_TEE= "1" and then U-Boot would automatically add the necessary dependency and add the correct filepath to the TEE environment variable.conf/machine/include/rk3506.inc line 14
Quoted 1 line
conf/machine/include/rk3506.inc new file +1
-0+KBUILD_DEFCONFIG ?= "rk3506_defconfig"Usually we would rather have
multi_v7_defconfigand if needed apply .scc+.cfg config fragments (see what's been done for nanopi-r4s).conf/machine/include/rk3506.inc line 17
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+KERNEL_CLASSES = "kernel-fitimage" +KERNEL_IMAGETYPE ?= "fitImage" +Isn't a FIT image the default when you include rockchip-defaults? See
RK_KERNEL_FITIMAGEvariable.conf/machine/include/rk3506.inc line 20
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+UBOOT_SUFFIX ?= "itb" +UBOOT_ENTRYPOINT ?= "0x02800000" +UBOOT_EXTLINUX_FDT = "${@bb.utils.contains('KERNEL_IMAGETYPE', 'fitImage', '', '/boot', d)}"isn't that already handled with
RK_KERNEL_FITIMAGEfrom within conf/machine/include/rockchip-extlinux.inc (you may then want to require this file).conf/machine/include/rk3568.inc require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc · line 13
Quoted 9 lines
conf/machine/include/rk3568.inc +0
-1@@ -10,7 +10,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3568 = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc"This has nothing to do with adding support for this new device no?
conf/machine/include/rk3588s.inc require conf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc · line 12
Quoted 12 lines
conf/machine/include/rk3568.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"conf/machine/include/rk3588s.inc +0
-1@@ -9,7 +9,6 @@ require conf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3588s = " bsp/rockchip/remove-non-rockchip-arch-arm64.scc"This has nothing to do with adding support for this new device no?
Quoted 3 lines
conf/machine/include/rk3588s.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"
Quoted 14 lines
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf line 4
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf new file +4
-0@@ -0,0 +1,27 @@ +#@TYPE: Machine +#@NAME: Luckfox Lyra Plus +#@DESCRIPTION: RK3506G2 based Linux Micro Development Board +#https://www.luckfox.com/Luckfox-Lyra-PlusUsually I would be excited about a tiny rockchip-based SBC with hardwired ethernet. But a new SoC based on CortexA7 (i.e. 32-bit)?? And no SDcard?
Oops, my mistake. There is an SDcard slot.
(hadn't scrolled down far enough)
Quoted 188 lines
Hopefully someone comes out with something new to replace the zero-3e which appears to be out of production.
Quoted 142 lines
conf/machine/luckfox-lyra-plus.conf line 10
Quoted 6 lines
conf/machine/luckfox-lyra-plus.conf new file +6
-0+ +require conf/machine/include/rk3506.inc + +KERNEL_DEVICETREE ?= "rk3506g-luckfox-lyra-plus-sd.dtb" +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" +PREFERRED_PROVIDER_virtual/kernel = "linux-armbian"I believe we only take boards which are supported by linux-yocto or linux-yocto-dev from the master branch of OE-Core. I don't even see patches on the linux-rockchip mailing list
Quoted 7 lines
conf/machine/luckfox-lyra-plus.conf new file +7
-0+EXTERNAL_KERNEL_DEVICETREE = "${DEPLOY_DIR_IMAGE}/devicetree" + +UBOOT_MACHINE = "luckfox-lyra-rk3506_defconfig" + +MACHINE_FEATURES = " \ + rtc \ + screen \conf/machine/luckfox-lyra-plus.conf line 27
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf new file +10
-0+ serial \ + usbgadget \ + usbhost \ + vfat \ +" + +KERNEL_FEATURES += " \ + cfg/fs/ext4.scc \ + features/cgroups/cgroups.scc \ +"
KERNEL_FEATURESmust be listed in the kernel recipe not in the machine.recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 12
Quoted 8 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +0
-0@@ -10,6 +10,15 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3308.bin }Wait.... This doesn't exist anymore. Against which branch did you develop this patch?
The master branch has a completely different mechanism which is much more automatic than what's needed below.
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 19
Quoted 7 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +7
-0+DDRBIN_VERS:rk3506 ?= "v1.02" +DDRBIN_FILE:rk3506 ?= "rk3506_ddr_750MHz_${DDRBIN_VERS}.bin" + +do_deploy:rk3506() { + # Prebuilt U-Boot TPL (DDR init) + install -m 644 ${S}/bin/rk35/${DDRBIN_FILE} ${DEPLOYDIR}/ddr-rk3506.bin + install -m 644 ${S}/bin/rk35/rk3506_tee_v1.23.bin ${DEPLOYDIR}/tee-rk3506.binThis is TEE, not DRAM init blob so shouldn't be deployed in this recipe.
Quoted 37 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +2
-0+} +> DDRBIN_VERS:rk3566 ?= "v1.23" DDRBIN_FILE:rk3566 ?= "rk3566_ddr_1056MHz_${DDRBIN_VERS}.bin"recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb +5
-0@@ -9,6 +9,11 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/rk3308_bl32_v*.bin ${DEPLOYDIR}/tee-rk3308.bin } +do_deploy:rk3506() { + # Prebuilt OPTEE-OS + install -m 644 ${S}/bin/rk35/rk3506_tee_v*.bin ${DEPLOYDIR}/tee-rk3506.bin +} + # NOTE: the following are not typos # the rk3566 uses the same bl32 as the rk3568 do_deploy:rk3566() {recipes-bsp/rkbin/rockchip-rkbin.inc +1
-0@@ -11,6 +11,7 @@ S = "${WORKDIR}/git" COMPATIBLE_MACHINE = "^$" COMPATIBLE_MACHINE:rk3308 = "rk3308" +COMPATIBLE_MACHINE:rk3506 = "rk3506" COMPATIBLE_MACHINE:rk3566 = "rk3566" COMPATIBLE_MACHINE:rk3568 = "rk3568" COMPATIBLE_MACHINE:rk3588s = "rk3588s"recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 17
Quoted 7 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +2
-0@@ -11,7 +11,9 @@ do_compile[depends] .= "${TFA_DEPENDS}" ROCKCHIP_TPL:closed-tpl = "${DEPLOY_DIR_IMAGE}/ddr-${SOC_FAMILY}.bin" # SOC_FAMILY for RK3588S is rk3588s but it should use the binaries from rk3588 ROCKCHIP_TPL:closed-tpl:rk3588s = "${DEPLOY_DIR_IMAGE}/ddr-rk3588.bin" +ROCKCHIP_TEE:closed-tpl:rk3506 = "${DEPLOY_DIR_IMAGE}/tee-rk3506.bin" EXTRA_OEMAKE:append:closed-tpl = " ROCKCHIP_TPL=${ROCKCHIP_TPL}" +EXTRA_OEMAKE:append:closed-tpl:rk3506 = " TEE=${ROCKCHIP_TEE}"I think you only want
ROCKCHIP_TEE:rk3506
and
EXTRA_OEMAKE:append:rk3506
as I believe TEE has nothing to do with whether we're using a DRAM init blob?
Also, this isn't working because you forgot to add the dependency on optee-os (see do_compile[depends] .= "${TFA_DEPENDS}" for how we have the dependency for trsuted-firmware-a on Aarch64).
Quoted 7 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0INIT_FIRMWARE_DEPENDS ??= "" INIT_FIRMWARE_DEPENDS:closed-tpl = " rockchip-rkbin-ddr:do_deploy"recipes-bsp/u-boot/u-boot_%.bbappend +0
-0recipes-bsp/u-boot/u-boot_%.bbappend DEPENDS:append:rk3308 = " u-boot-tools-native" · line 14
Quoted 7 lines
recipes-bsp/u-boot/u-boot_%.bbappend +4
-0@@ -8,6 +8,10 @@ DEPENDS:append:rk3308 = " u-boot-tools-native" DEPENDS:append:rock-pi-4 = " gnutls-native" DEPENDS:append:rk-u-boot-env = " u-boot-mkenvimage-native" +BRANCH:luckfox-lyra-plus = "rk3506" +SRC_URI:luckfox-lyra-plus = "git://source.denx.de/u-boot/contributors/kwiboo/u-boot.git;protocol=https;branch=${BRANCH}" +SRCREV:luckfox-lyra-plus = "c6782a37feee4a8aee08d321c01b4ca0b0562f0b" +That's a BIG no-no.
Have a separate recipe for this.
Knowing Jonas, there are chances this branch will get rebased, so I don't think we want this at all.
I see patches on the U-Boot mailing list for RK3506 support in U-Boot, see
https://lore.kernel.org/u-boot/[email protected]/ and Jonas "promised" a v2. Maybe work with him on getting the v2 sent upstream?Quoted 12 lines
recipes-kernel/linux/linux-armbian_git.bb
Quoted 8 lines
recipes-bsp/u-boot/u-boot_%.bbappend +0
-0do_compile:append:rock2-square () { # copy to default search path if [ "${SPL_BINARY}" = "u-boot-spl-dtb.bin" ]; thenrecipes-kernel/linux/linux-armbian_git.bb new file +0
-0I'll let Trevor speak his mind here but I don't think Armbian Linux kernel is something we're interested in supporting. Work with upstream to get the board supported in upstream Linux and then we can have it here.
I agree with Quentin's assessment. If rockchip were a platform that had little or no upstream support then we would need to have all sorts of recipes for bootloaders and kernels from wherever we could find them. But with rockchip, upstream support is usually just a matter of time. I'll take new machines if they're in linux-yocto-dev, but would rather stay away from vendor kernels.
If a board is wildly popular and will never have upstream support then I would consider it. But if Jonas is already working on it, then we will probably see upstream support shortly.
Quoted 7 lines
Cheers,
Quentin-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group.
View/Reply Online (#3136): https://lists.yoctoproject.org/g/yocto-patches/message/3136
Mute This Topic: https://lists.yoctoproject.org/mt/117496463/900817
Group Owner: [email protected]
Unsubscribe: https://lists.yoctoproject.org/g/yocto-patches/leave/13168745/900817/63955952/xyzzy [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-
ok
Quoted 389 lines · On Wed, Jan 28, 2026, 17:07 Trevor Woerner <[email protected]> wrote:
Quoted 3 lines · Trevor Woerner via lists.yoctoproject.org
Thank you, Quentin, for your thorough review!
On Wed 2026-01-28 @ 11:35:17 AM, Quentin Schulz via
Quoted 4 lines · lists.yoctoproject.org
Quoted 4 lines
Hi Marcin,
Quoted 1 line · Marcin Bober via lists.yoctoproject.org
[You don't often get email from mbober1=
[email protected]. Learn why this is important at
https://aka.ms/LearnAboutSenderIdentification ]Quoted 11 lines
Quoted 11 lines
Quoted 11 lines
The Luckfox Lyra Plus is ultra-small, tri-core single board computer based on the Rockchip RK3506G2, with a very compact form factor.
Signed-off-by Marcin Bober <[email protected]>--- README | 1 + conf/machine/include/rk3506.inc | 20 +++++++++++++ conf/machine/include/rk3568.inc | 1 - conf/machine/include/rk3588s.inc | 1 - conf/machine/luckfox-lyra-plus.conf | 27+++++++++++++++++
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb | 9 ++++++ .../rkbin/rockchip-rkbin-optee-os_git.bb | 5 ++++ recipes-bsp/rkbin/rockchip-rkbin.inc | 1 + recipes-bsp/u-boot/u-boot-rockchip.inc | 2 ++ recipes-bsp/u-boot/u-boot_%.bbappend | 4 +++ recipes-kernel/linux/linux-armbian_git.bb | 29+++++++++++++++++++
Quoted 18 lines
Quoted 18 lines
Quoted 10 lines
11 files changed, 98 insertions(+), 2 deletions(-)create mode 100644 conf/machine/include/rk3506.inc create mode 100644
conf/machine/luckfox-lyra-plus.confcreate mode 100644 recipes-kernel/linux/linux-armbian_git.bbREADME +0
-0README Status of supported boards: · line 26
Quoted 4 lines
README +1
-0@@ -23,6 +23,7 @@ Status of supported boards: tinker-board tinker-board-s vyasa-rk3288 + luckfox-lyra-plusPlease keep the list ordered alphabetically.
Quoted 1 line
Quoted 3 lines
Quoted 3 lines
Review
Quoted 3 lines
64-bit: nanopi-m4(quoted diff) +0
-0b/conf/machine/include/rk3506.inc
Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
new file mode 100644
index 0000000..e204283conf/machine/include/rk3506.inc new file +7
-0@@ -0,0 +1,20 @@ +MACHINEOVERRIDES =. "rk3506:" +SOC_FAMILY = "rk3506" +DEFAULTTUNE = "cortexa7thf-neon-vfpv4" + +ROCKCHIP_CLOSED_TPL ?= "1" + +require conf/machine/include/soc-family.incQuoted 8 lines
Quoted 8 lines
conf/machine/include/rk3506.inc line 13
Quoted 6 lines
conf/machine/include/rk3506.inc new file +6
-0+require conf/machine/include/rockchip-defaults.inc +require conf/machine/include/arm/armv7a/tune-cortexa7.inc +require conf/machine/include/rockchip-wic.inc + +PREFERRED_PROVIDER_optee-os = "rockchip-rkbin-optee-os" +Ooooh, I believe this would mean OP-TEE OS blob from Rockchip can be
used
Quoted 1 line
Quoted 1 line
with upstream U-Boot? Have you actually tried? This would be
interesting for
Quoted 1 line
Quoted 1 line
me for
https://lore.kernel.org/yocto-patches/[email protected]/
Quoted 5 lines
Quoted 5 lines
to check if I got it right for rockchip-rkbin-optee-os as well.
Is OP-TEE OS *required* on rk3506 to be able to boot? Do you know?
Essentially, with the patch series listed above applied, you would
need to
Quoted 1 line
Quoted 1 line
set
RK_UBOOT_TEE= "1" and then U-Boot would automatically add thenecessary
Quoted 1 line
Quoted 1 line
dependency and add the correct filepath to the TEE environment
variable.
Quoted 13 lines
Quoted 13 lines
conf/machine/include/rk3506.inc line 14
Quoted 2 lines
conf/machine/include/rk3506.inc new file +1
-0+KBUILD_DEFCONFIG ?= "rk3506_defconfig"Usually we would rather have
multi_v7_defconfigand if needed apply .scc+.cfg config fragments (see what's been done for nanopi-r4s).conf/machine/include/rk3506.inc line 17
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+KERNEL_CLASSES = "kernel-fitimage" +KERNEL_IMAGETYPE ?= "fitImage" +Isn't a FIT image the default when you include rockchip-defaults? See
RK_KERNEL_FITIMAGEvariable.Quoted 3 lines
Quoted 3 lines
conf/machine/include/rk3506.inc
Quoted 3 lines
conf/machine/include/rk3506.inc new file +3
-0+UBOOT_SUFFIX ?= "itb" +UBOOT_ENTRYPOINT ?= "0x02800000" +UBOOT_EXTLINUX_FDT = "${@bb.utils.contains('KERNEL_IMAGETYPE','fitImage', '', '/boot', d)}"
Quoted 3 lines
Quoted 3 lines
isn't that already handled with
RK_KERNEL_FITIMAGEfrom within conf/machine/include/rockchip-extlinux.inc (you may then want torequire
Quoted 3 lines
Quoted 3 lines
this file).
Review
Quoted 1 line
(quoted diff) +0
-0b/conf/machine/include/rk3568.inc
Quoted 4 lines
Quoted 4 lines
conf/machine/include/rk3568.inc require
Quoted 4 lines
index bcf9dd8..12f0ba2 100644
conf/machine/include/rk3568.inc +0
-0@@ -10,7 +10,6 @@ requireconf/machine/include/arm/armv8-2a/tune-cortexa55.inc
Quoted 4 lines
Quoted 4 lines
conf/machine/include/rk3568.inc require conf/machine/include/arm/armv8-2a/tune-cortexa55.inc
Quoted 4 lines
conf/machine/include/rk3568.inc +0
-1require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3568 = "bsp/rockchip/remove-non-rockchip-arch-arm64.scc"
Quoted 7 lines
Quoted 7 lines
This has nothing to do with adding support for this new device no?
Review
Quoted 4 lines
conf/machine/include/rk3568.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"(quoted diff) +0
-0b/conf/machine/include/rk3588s.inc
Quoted 4 lines
Quoted 4 lines
conf/machine/include/rk3588s.inc require
Quoted 4 lines
index 6ec344a..d0654c1 100644
conf/machine/include/rk3588s.inc +0
-0@@ -9,7 +9,6 @@ requireconf/machine/include/arm/armv8-2a/tune-cortexa76-cortexa55.inc
Quoted 4 lines
Quoted 4 lines
conf/machine/include/rk3588s.inc require · line 12
Quoted 4 lines
conf/machine/include/rk3588s.inc +0
-1require conf/machine/include/rockchip-wic.inc KBUILD_DEFCONFIG ?= "defconfig" -KERNEL_FEATURES:append:rk3588s = "bsp/rockchip/remove-non-rockchip-arch-arm64.scc"
Quoted 7 lines
Quoted 7 lines
This has nothing to do with adding support for this new device no?
Review
Quoted 4 lines
conf/machine/include/rk3588s.inc +0
-0KERNEL_CLASSES = "kernel-fitimage" KERNEL_IMAGETYPE ?= "fitImage"(quoted diff) +0
-0
b/conf/machine/luckfox-lyra-plus.confQuoted 5 lines
Quoted 5 lines
Quoted 5 lines
new file mode 100644
index 0000000..529a472conf/machine/luckfox-lyra-plus.conf new file +0
-0@@ -0,0 +1,27 @@Quoted 8 lines
Quoted 4 lines
conf/machine/luckfox-lyra-plus.conf line 4
Quoted 4 lines
conf/machine/luckfox-lyra-plus.conf new file +4
-0+#@TYPE: Machine +#@NAME: Luckfox Lyra Plus +#@DESCRIPTION: RK3506G2 based Linux Micro Development Board +#https://www.luckfox.com/Luckfox-Lyra-PlusUsually I would be excited about a tiny rockchip-based SBC with hardwired ethernet. But a new SoC based on CortexA7 (i.e. 32-bit)?? And no SDcard?
Oops, my mistake. There is an SDcard slot.
(hadn't scrolled down far enough)Quoted 13 lines
Hopefully someone comes out with something new to replace the zero-3e which appears to be out of production.
Quoted 9 lines
conf/machine/luckfox-lyra-plus.conf line 10
Quoted 6 lines
conf/machine/luckfox-lyra-plus.conf new file +6
-0+ +require conf/machine/include/rk3506.inc + +KERNEL_DEVICETREE ?= "rk3506g-luckfox-lyra-plus-sd.dtb" +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules" +PREFERRED_PROVIDER_virtual/kernel = "linux-armbian"I believe we only take boards which are supported by linux-yocto or linux-yocto-dev from the master branch of OE-Core. I don't even see
patches
Quoted 22 lines
Quoted 22 lines
on the linux-rockchip mailing list
Quoted 7 lines
conf/machine/luckfox-lyra-plus.conf new file +7
-0+EXTERNAL_KERNEL_DEVICETREE = "${DEPLOY_DIR_IMAGE}/devicetree" + +UBOOT_MACHINE = "luckfox-lyra-rk3506_defconfig" + +MACHINE_FEATURES = " \ + rtc \ + screen \conf/machine/luckfox-lyra-plus.conf line 27
Quoted 10 lines
conf/machine/luckfox-lyra-plus.conf new file +10
-0+ serial \ + usbgadget \ + usbhost \ + vfat \ +" + +KERNEL_FEATURES += " \ + cfg/fs/ext4.scc \ + features/cgroups/cgroups.scc \ +"
KERNEL_FEATURESmust be listed in the kernel recipe not in the machine.Quoted 1 line
Quoted 1 line
Review
Quoted 1 line
(quoted diff) +0
-0b/recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb
Quoted 5 lines
Quoted 5 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 10
Quoted 5 lines
index 3227a53..7f654ff 100644
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +0
-0@@ -10,6 +10,15 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/${DDRBIN_FILE}${DEPLOYDIR}/ddr-rk3308.bin
Quoted 4 lines
Quoted 4 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 12
Quoted 2 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +0
-0}Wait.... This doesn't exist anymore. Against which branch did you
develop
Quoted 3 lines
Quoted 3 lines
this patch?
The master branch has a completely different mechanism which is much
more
Quoted 8 lines
Quoted 8 lines
automatic than what's needed below.
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() {
Quoted 6 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +6
-0+DDRBIN_VERS:rk3506 ?= "v1.02" +DDRBIN_FILE:rk3506 ?= "rk3506_ddr_750MHz_${DDRBIN_VERS}.bin" + +do_deploy:rk3506() { + # Prebuilt U-Boot TPL (DDR init) + install -m 644 ${S}/bin/rk35/${DDRBIN_FILE}${DEPLOYDIR}/ddr-rk3506.bin
Quoted 1 line
Quoted 1 line
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb do_deploy:rk3308() { · line 19
Quoted 1 line
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +1
-0+ install -m 644 ${S}/bin/rk35/rk3506_tee_v1.23.bin${DEPLOYDIR}/tee-rk3506.bin
Quoted 2 lines
Quoted 2 lines
This is TEE, not DRAM init blob so shouldn't be deployed in this
recipe.
Quoted 6 lines
Quoted 6 lines
Review
Quoted 6 lines
recipes-bsp/rkbin/rockchip-rkbin-ddr_git.bb +2
-0+} +> DDRBIN_VERS:rk3566 ?= "v1.23" DDRBIN_FILE:rk3566 ?= "rk3566_ddr_1056MHz_${DDRBIN_VERS}.bin"(quoted diff) +0
-0b/recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb
Quoted 5 lines
Quoted 5 lines
recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb do_deploy:rk3308() { · line 9
Quoted 5 lines
index 6d25368..cbd376c 100644
recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb +0
-0@@ -9,6 +9,11 @@ do_deploy:rk3308() { install -m 644 ${S}/bin/rk33/rk3308_bl32_v*.bin${DEPLOYDIR}/tee-rk3308.bin
Quoted 5 lines
Quoted 5 lines
recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb do_deploy:rk3308() {
Quoted 5 lines
recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb +3
-0} +do_deploy:rk3506() { + # Prebuilt OPTEE-OS + install -m 644 ${S}/bin/rk35/rk3506_tee_v*.bin${DEPLOYDIR}/tee-rk3506.bin
Quoted 6 lines
Quoted 6 lines
Review
Quoted 6 lines
recipes-bsp/rkbin/rockchip-rkbin-optee-os_git.bb +2
-0+} + # NOTE: the following are not typos # the rk3566 uses the same bl32 as the rk3568 do_deploy:rk3566() {(quoted diff) +0
-0b/recipes-bsp/rkbin/rockchip-rkbin.inc
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
index 9264db9..8dfdc09 100644
recipes-bsp/rkbin/rockchip-rkbin.inc +0
-0@@ -11,6 +11,7 @@ S = "${WORKDIR}/git"Quoted 7 lines
Quoted 7 lines
Review
Quoted 7 lines
recipes-bsp/rkbin/rockchip-rkbin.inc +1
-0COMPATIBLE_MACHINE = "^$" COMPATIBLE_MACHINE:rk3308 = "rk3308" +COMPATIBLE_MACHINE:rk3506 = "rk3506" COMPATIBLE_MACHINE:rk3566 = "rk3566" COMPATIBLE_MACHINE:rk3568 = "rk3568" COMPATIBLE_MACHINE:rk3588s = "rk3588s"(quoted diff) +0
-0b/recipes-bsp/u-boot/u-boot-rockchip.inc
Quoted 5 lines
Quoted 5 lines
recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 11
Quoted 5 lines
index 2b5bbd7..67c4418 100644
recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0@@ -11,7 +11,9 @@ do_compile[depends] .= "${TFA_DEPENDS}" ROCKCHIP_TPL:closed-tpl ="${DEPLOY_DIR_IMAGE}/ddr-${SOC_FAMILY}.bin"
Quoted 1 line
Quoted 1 line
recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 12
Quoted 1 line
recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0# SOC_FAMILY for RK3588S is rk3588s but it should use the binariesfrom rk3588
Quoted 1 line
Quoted 1 line
recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 13
Quoted 1 line
recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0ROCKCHIP_TPL:closed-tpl:rk3588s ="${DEPLOY_DIR_IMAGE}/ddr-rk3588.bin"
Quoted 1 line
Quoted 1 line
recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 14
Quoted 1 line
recipes-bsp/u-boot/u-boot-rockchip.inc +1
-0+ROCKCHIP_TEE:closed-tpl:rk3506 ="${DEPLOY_DIR_IMAGE}/tee-rk3506.bin"
Quoted 10 lines
Quoted 10 lines
recipes-bsp/u-boot/u-boot-rockchip.inc do_compile[depends] .= "${TFA_DEPENDS}" · line 17
Quoted 3 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +1
-0EXTRA_OEMAKE:append:closed-tpl = " ROCKCHIP_TPL=${ROCKCHIP_TPL}" +EXTRA_OEMAKE:append:closed-tpl:rk3506 = " TEE=${ROCKCHIP_TEE}"I think you only want
ROCKCHIP_TEE:rk3506
and
Quoted 7 lines
Quoted 7 lines
EXTRA_OEMAKE:append:rk3506
as I believe TEE has nothing to do with whether we're using a DRAM init blob?
Also, this isn't working because you forgot to add the dependency on optee-os (see do_compile[depends] .= "${TFA_DEPENDS}" for how we have
the
Quoted 5 lines
Quoted 5 lines
dependency for trsuted-firmware-a on Aarch64).
Review
Quoted 3 lines
recipes-bsp/u-boot/u-boot-rockchip.inc +0
-0INIT_FIRMWARE_DEPENDS ??= "" INIT_FIRMWARE_DEPENDS:closed-tpl = " rockchip-rkbin-ddr:do_deploy"(quoted diff) +0
-0b/recipes-bsp/u-boot/u-boot_%.bbappend
Quoted 9 lines
Quoted 9 lines
recipes-bsp/u-boot/u-boot_%.bbappend DEPENDS:append:rk3308 = " u-boot-tools-native" · line 12
Quoted 9 lines
index 08e1730..fc6a36e 100644
recipes-bsp/u-boot/u-boot_%.bbappend +2
-0@@ -8,6 +8,10 @@ DEPENDS:append:rk3308 = " u-boot-tools-native" DEPENDS:append:rock-pi-4 = " gnutls-native" DEPENDS:append:rk-u-boot-env = " u-boot-mkenvimage-native" +BRANCH:luckfox-lyra-plus = "rk3506" +SRC_URI:luckfox-lyra-plus = "git://source.denx.de/u-boot/contributors/kwiboo/u-boot.git;protocol=https;branch=${BRANCH}
<http://source.denx.de/u-boot/contributors/kwiboo/u-boot.git;protocol=https;branch=$%7BBRANCH%7D>
"Quoted 1 line
Quoted 1 line
recipes-bsp/u-boot/u-boot_%.bbappend DEPENDS:append:rk3308 = " u-boot-tools-native" · line 13
Quoted 1 line
recipes-bsp/u-boot/u-boot_%.bbappend +1
-0+SRCREV:luckfox-lyra-plus ="
c6782a37feee4a8aee08d321c01b4ca0b0562f0b"Quoted 7 lines
Quoted 7 lines
recipes-bsp/u-boot/u-boot_%.bbappend DEPENDS:append:rk3308 = " u-boot-tools-native" · line 14
Quoted 1 line
recipes-bsp/u-boot/u-boot_%.bbappend +1
-0+That's a BIG no-no.
Have a separate recipe for this.
Knowing Jonas, there are chances this branch will get rebased, so I
don't
Quoted 3 lines
Quoted 3 lines
think we want this at all.
I see patches on the U-Boot mailing list for RK3506 support in U-Boot,
see
Quoted 1 line
Quoted 1 line
https://lore.kernel.org/u-boot/[email protected]/
andQuoted 1 line
Quoted 1 line
Jonas "promised" a v2. Maybe work with him on getting the v2 sent
upstream?
Quoted 5 lines
Quoted 5 lines
Review
Quoted 5 lines
recipes-bsp/u-boot/u-boot_%.bbappend +0
-0do_compile:append:rock2-square () { # copy to default search path if [ "${SPL_BINARY}" = "u-boot-spl-dtb.bin" ]; then(quoted diff) +0
-0b/recipes-kernel/linux/linux-armbian_git.bb
Quoted 6 lines
Quoted 6 lines
recipes-kernel/linux/linux-armbian_git.bb
Quoted 4 lines
new file mode 100644
index 0000000..42dad4frecipes-kernel/linux/linux-armbian_git.bb new file +0
-0I'll let Trevor speak his mind here but I don't think Armbian Linux
kernel
Quoted 1 line
Quoted 1 line
is something we're interested in supporting. Work with upstream to get
the
Quoted 22 lines
Quoted 1 line
board supported in upstream Linux and then we can have it here.
I agree with Quentin's assessment. If rockchip were a platform that had little or no upstream support then we would need to have all sorts of recipes for bootloaders and kernels from wherever we could find them. But with rockchip, upstream support is usually just a matter of time. I'll take new machines if they're in linux-yocto-dev, but would rather stay away from vendor kernels.
If a board is wildly popular and will never have upstream support then I would consider it. But if Jonas is already working on it, then we will probably see upstream support shortly.
Quoted 7 lines
Cheers,
QuentinQuoted 3 lines
-=-=-=-=-=-=-=-=-=-=-=-
Links: You receive all messages sent to this group. View/Reply Online (#3136):https://lists.yoctoproject.org/g/yocto-patches/message/3136
Quoted 3 lines
Mute This Topic: https://lists.yoctoproject.org/mt/117496463/900817
Group Owner: [email protected] Unsubscribe:https://lists.yoctoproject.org/g/yocto-patches/leave/13168745/900817/63955952/xyzzy
[[email protected]]Quoted 3 lines
-=-=-=-=-=-=-=-=-=-=-=-