ARM: dts: BCM5301X: AC68U: set WAN MAC from nvram
Subsystems (2)
PATCH 1/1 ARM: dts: BCM5301X: AC68U: set WAN MAC from nvram
The WAN MAC is offset by 1. Set in dts to avoid having to handle this in userspace.
nvram size found from a random bootlog online.
Signed-off-by Rosen Penev <[email protected]>
--- .../dts/broadcom/bcm4708-asus-rt-ac68u.dts | 55 +++++++++++++++++++ 1 file changed, 55 insertions(+)
arch/arm/boot/dts/broadcom/bcm4708-asus-rt-ac68u.dts +55 -0
@@ -25,6 +25,15 @@ memory@0 { <0x88000000 0x08000000>; }; + nvram@1c080000 { + compatible = "brcm,nvram"; + reg = <0x1c080000 0x180000>; + + et0macaddr: et0macaddr { + #nvmem-cell-cells = <1>; + }; + }; + leds { compatible = "gpio-leds";
@@ -83,3 +92,49 @@ button-rfkill { &usb3_phy { status = "okay"; }; + +&gmac0 { + nvmem-cells = <&et0macaddr 0>; + nvmem-cell-names = "mac-address"; +}; + +&srab { + status = "okay"; + + ports { + port@0 { + label = "wan"; + + nvmem-cells = <&et0macaddr 1>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + label = "lan1"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan3"; + }; + + port@4 { + label = "lan4"; + }; + + port@5 { + label = "cpu"; + }; + + port@7 { + status = "disabled"; + }; + + port@8 { + status = "disabled"; + }; + }; +};
Signature · 1 line
2.55.0
Florian Fainelli
maintainerQuoted 6 lines · Rosen Penev
The WAN MAC is offset by 1. Set in dts to avoid having to handle this in userspace.
nvram size found from a random bootlog online.
Signed-off-by Rosen Penev <[email protected]>
You are doing two things here:
- assign the MAC address from NVRAM
- declare the switch ports along with their label
Please split this up in two separate patches, thank you.
Also, enabling port 5 is problematic, see this discussion:
https://lore.kernel.org/all/[email protected]/
This applies to all of the similar patches you submitted, therefore I won't repeat this feedback.
Signature · 1 line
Florian