Test Mode
Hi Marcel
Quoted 7 lines
Quoted 4 lines
2) I tried using the test mode commands and I am simulatameously running the hcidump, which prints a unknown command type. I am just presuming that the commands might be working alright , only that hcidump doesn't decipher the test commands. Am i right??
What version of hcidump do you use? Show the undecoded output to us.
I am using hcidump ver 1.15.
I am trying to set my dongle for a local loopback test. I try with a "Enable device under test command"
root]# hcitool cmd 0x06 0x0003
Hci dump output is
< HCI Command: Unknown (0x06|0x0003) plen 0
Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4
01 03 18 00
I am not getting an error. I try to write the "write loopback method command" and enable local loopback.
root]# hcitool cmd 0x06 0x0002 0x01
Hci dump output is
< HCI Command: Unknown (0x06|0x0002) plen 1
01
Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 4
01 02 18 11
Status shows 11 which is "HCI unsupported feature". I am using a version 1.1 anycom-120 usb dongle.
hciconfig -a gives the features as
Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00
Is this a problem with the firmware. Do i have to upgrade the firmware and Can i do it??
I also have another doubt......how can i generate the LMP commands required for the test mode....as in LMP_test_activate PDU and several other LMP commands. The test methodology only speaks about the LMP PDU's. How can i generate these LMP commands for the test scenarios.
Thanks,
Best Regards,
Manjunath.
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Manjunath,
Quoted 9 lines
I am trying to set my dongle for a local loopback test. I try with a "Enable device under test command"
root]# hcitool cmd0x060x0003Hci dump output is
< HCI Command: Unknown (0x06|0x0003) plen 0
Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 401 03 18 00
write a patch for hcidump so that these HCI commands are decoded correctly.
Quoted 5 lines
I am not getting an error. I try to write the "write loopback method command" and enable local loopback.
root]# hcitool cmd
0x060x00020x01
Quoted 8 lines
Hci dump output is
< HCI Command: Unknown (0x06|0x0002) plen 1
01Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 401 02 18 11
Status shows 11 which is "HCI unsupported feature". I am using a version 1.1 anycom-120 usb dongle.
I don't think that this feature is mandatory to support. I never used or needed it.
Quoted 2 lines
Is this a problem with the firmware. Do i have to upgrade the firmware and Can i do it??
I don't know.
Quoted 4 lines
I also have another doubt......how can i generate the LMP commands required for the test mode....as in
LMP_test_activatePDU and several other LMP commands. The test methodology only speaks about the LMP PDU's. How can i generate these LMP commands for the test scenarios.
You can't generate any LMP messages from the HCI. Actually the HCI command should result in a call to the appropiate LMP commands.
Regards
Marcel
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Hi Marcel,
The LMP specification speaks about the Test Mode and Methodology saying that Adaptive power control, adaptive freq hopping scenarios can be imitated provided the respective LMP PDU's are sent.
How do I make the HCI commands initiate these LMP PDU's? The HCI specification have only the "Test Enable" and "Read and Write Loopback" test commands but other no commands which will result in inititating the LM to the testing modes. How do i conduct these adaptive tests?
Thank you,
regards,
Manjunath
Quoted 51 lines · Marcel Holtmann
Hi Manjunath,
Quoted 9 lines
I am trying to set my dongle for a local loopback test. I try with a "Enable device under test command"
root]# hcitool cmd0x060x0003Hci dump output is
< HCI Command: Unknown (0x06|0x0003) plen 0
Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 401 03 18 00
write a patch for hcidump so that these HCI commands are decoded correctly.
Quoted 5 lines
I am not getting an error. I try to write the "write loopback method command" and enable local loopback.
root]# hcitool cmd
0x060x00020x01Quoted 8 lines
Hci dump output is
< HCI Command: Unknown (0x06|0x0002) plen 1
01Quoted 1 line
HCI Event: Command Complete (
0x0e) plen 401 02 18 11
Status shows 11 which is "HCI unsupported feature". I am using a version 1.1 anycom-120 usb dongle.
I don't think that this feature is mandatory to support. I never used or needed it.
Quoted 2 lines
Is this a problem with the firmware. Do i have to upgrade the firmware and Can i do it??
I don't know.
Quoted 4 lines
I also have another doubt......how can i generate the LMP commands required for the test mode....as in
LMP_test_activatePDU and several other LMP commands. The test methodology only speaks about the LMP PDU's. How can i generate these LMP commands for the test scenarios.You can't generate any LMP messages from the HCI. Actually the HCI command should result in a call to the appropiate LMP commands.
Regards
Marcel
Quoted 10 lines
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now.
http://productguide.itmanagersjournal.com/
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users