Skip to contentSkip to conversation

List of Supported Python versions

DISCUSSION [email protected] 2 participants 5 messages Jul 18, 2019

lore
Share & tools
lore
#0 lore raw

Hello Team,

Which Python, Python-OpenCV, Python-Numpy, Python-Scipy and OpenCV (max)versions are supported in Yocto 2.0.3 (Jethro) distro version?

Can I get list of notes in which version of all supported modules have been mentioned?

Please let me know.

Regards,
Jaymin

#1 lore raw

The link to the search engine:
https://layers.openembedded.org/layerindex/branch/master/recipes/

Quoted 13 lines · On 18.07.2019 07:41, [email protected] wrote:

Hello Team,

Which Python, Python-OpenCV, Python-Numpy, Python-Scipy and OpenCV (max)versions are supported in Yocto 2.0.3 (Jethro) distro version?

Can I get list of notes in which version of all supported modules have been mentioned?

Please let me know.

Regards,
Jaymin

Signature · 3 lines
Maciej Pijanowski
Embedded Systems Engineer
https://3mdeb.com | @3mdeb_com
#2 lore raw

Hi Maciej,

Thanks for the link.
If I want to use different(updated) version of a particular function, e.g. Python, Is is possible?
As per link Jethro is supporting Python version 2.7.9. I want to integrate Python version 2.7.16 and Python3 3.7.
So, Do I need to use another branch which is supporting these versions or Is there any way to integrate these versions without changing current(Jethro) branch?

In my case, I have limitation. Can't change to any other branch.
I want to integrate Python3-Numpy, Python3-OpenCV, Python-Scipy and Python3-scipy modules in the build.
Python3-Scipy is dependent on Python3-Numpy and Python3-Numpy is dependent on OpenBLAS, ATLAS and few other libraries. While these libraries are dependent on FORTRAN (libgfortran) compiler. Now, in my current (Jethro) branch, when I am trying to build libgfortran, it requires GCC version >=5. And, facing so many errors while building GCC 5.2 in the Yocto build. While GCC 5.2.0 is already supported in the Jethro.

In simple,
How can I integrate Python3-Numpy, Python-Scipy, Python3-Scipy and Python3-OpenCV packages without changing the branch? What is the simplest way to integrate above packages?

Please suggest.

Regards,
Jaymin

Quoted 30 lines · Maciej Pijanowski

The link to the search engine:
https://layers.openembedded.org/layerindex/branch/master/recipes/

Quoted 5 lines · On 18.07.2019 07:41, [email protected] wrote:

Hello Team,

Which Python, Python-OpenCV, Python-Numpy, Python-Scipy and OpenCV (max)versions are supported in Yocto 2.0.3 (Jethro) distro version?

Quoted 8 lines

Can I get list of notes in which version of all supported modules have been mentioned?

Please let me know.

Regards,
Jaymin

--
Maciej Pijanowski
Embedded Systems Engineer
https://3mdeb.com | @3mdeb_com

--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto

#3 lore raw
Quoted 11 lines · On 18.07.2019 09:34, [email protected] wrote:

Hi Maciej,

Thanks for the link.
If I want to use different(updated) version of a particular function, e.g. Python, Is is possible?
As per link Jethro is supporting Python version 2.7.9. I want to integrate Python version 2.7.16 and Python3 3.7.
So, Do I need to use another branch which is supporting these versions or Is there any way to integrate these versions without changing current(Jethro) branch?

Quoted 10 lines

In my case, I have limitation. Can't change to any other branch. I want to integrate Python3-Numpy, Python3-OpenCV, Python-Scipy and Python3-scipy modules in the build.
Python3-Scipy is dependent on Python3-Numpy and Python3-Numpy is dependent on OpenBLAS, ATLAS and few other libraries. While these libraries are dependent on FORTRAN (libgfortran) compiler. Now, in my current (Jethro) branch, when I am trying to build libgfortran, it requires GCC version >=5. And, facing so many errors while building GCC 5.2 in the Yocto build. While GCC 5.2.0 is already supported in the Jethro.

Do you mind sharing the reason being tied to this old branch? You could try to port newer recipes from more recent branches to the Jehtro. But I believe
this may be more tedious and more time consuming than resolving the original isssue of yours (upgrading from Jethro to more recent branch).

Quoted 42 lines

In simple,
How can I integrate Python3-Numpy, Python-Scipy, Python3-Scipy and Python3-OpenCV packages without changing the branch? What is the simplest way to integrate above packages?

Please suggest.

Regards,
Jaymin

Quoted 30 lines · Maciej Pijanowski

The link to the search engine:
https://layers.openembedded.org/layerindex/branch/master/recipes/

Quoted 13 lines · On 18.07.2019 07:41, [email protected] wrote:

Hello Team,

Which Python, Python-OpenCV, Python-Numpy, Python-Scipy and OpenCV (max)versions are supported in Yocto 2.0.3 (Jethro) distro version?

Can I get list of notes in which version of all supported modules have been mentioned?

Please let me know.

Regards,
Jaymin

Signature · 11 lines
Maciej Pijanowski
Embedded Systems Engineer
https://3mdeb.com | @3mdeb_com



-- 
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto
Signature · 3 lines
Maciej Pijanowski
Embedded Systems Engineer
https://3mdeb.com | @3mdeb_com
#4 lore raw
In reply to [email protected]
Quoted 1 line · On 18.07.2019 07:41, [email protected] wrote:

Hello Team,

Hello,

Quoted 6 lines

Which Python, Python-OpenCV, Python-Numpy, Python-Scipy and OpenCV (max)versions are supported in Yocto 2.0.3 (Jethro) distro version?

Can I get list of notes in which version of all supported modules have been mentioned?

You can use the search engine to look for the packages you are interested in.
I would recommend to use one of the more recent releases instead of the Jethro, which is almost
4 years old.

Quoted 6 lines

Please let me know.

Regards,
Jaymin

Signature · 3 lines
Maciej Pijanowski
Embedded Systems Engineer
https://3mdeb.com | @3mdeb_com