MIPS: Honor L2 bypass bit

index 5ab5fa8..ef625eb 100644
@@ -57,6 +57,38 @@ static struct bcache_ops mips_sc_ops = {
 	.bc_inv = mips_sc_inv
 };
 
+/*
+ * Check if the L2 cache controller is activated on a particular platform.
+ * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS
+ * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the
+ * cache being disabled.  However there is no guarantee for this to be
+ * true on all platforms.  In an act of stupidity the spec defined bits
+ * 12..15 as implementation defined so below function will eventually have
+ * to be replaced by a platform specific probe.
+ */
+static inline int mips_sc_is_activated(struct cpuinfo_mips *c,
+	unsigned int config2)
+{
+	unsigned int tmp;
+
+	/* Check the bypass bit (L2B) */
+	switch (c->cputype) {
+	case CPU_34K:
+	case CPU_74K:
+	case CPU_1004K:
+	case CPU_BMIPS5000:
+		if (config2 & (1 << 12))
+			return 0;
+	}
+
+	tmp = (config2 >> 4) & 0x0f;
+	if (0 < tmp && tmp <= 7)
+		c->scache.linesz = 2 << tmp;
+	else
+		return 0;
+	return 1;
+}
+
 static inline int __init mips_sc_probe(void)
 {
 	struct cpuinfo_mips *c = &current_cpu_data;

@@ -79,10 +111,8 @@ static inline int __init mips_sc_probe(void)
 		return 0;
 
 	config2 = read_c0_config2();
-	tmp = (config2 >> 4) & 0x0f;
-	if (0 < tmp && tmp <= 7)
-		c->scache.linesz = 2 << tmp;
-	else
+
+	if (!mips_sc_is_activated(c, config2))
 		return 0;
 
 	tmp = (config2 >> 8) & 0x0f;