Fix mincore() tmpfs test failure
Subsystems (3)
cover Fix mincore() tmpfs test failure
Patch 1 fixes the failure of mincore() tmpfs selftest. While testing the mincore() syscall, patch 2 provides some improvements for mincore() when mTHP is enabled.
Baolin Wang (2):
selftests: mincore: fix tmpfs mincore test failure
mm: mincore: use folio_pte_batch() to batch process large folios
mm/mincore.c | 27 +++++++++++++++---- .../selftests/mincore/mincore_selftest.c | 25 +++++++++++++++-- 2 files changed, 45 insertions(+), 7 deletions(-)
Signature · 1 line
2.43.5
PATCH 1/2 selftests: mincore: fix tmpfs mincore test failure
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expected ra_pages (511) == 0 (0) mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memorycheck_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"
The reason for the test case failure is that my system automatically enabled tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always' cmdline. However, the test case still expects the tmpfs mounted on /dev/shm to allocate small folios, which leads to assertion failures when verifying readahead pages.
To fix this issue, remount tmpfs to a new test directory and set the 'huge=never' parameter to avoid allocating large folios, which can pass the test.
--- .../selftests/mincore/mincore_selftest.c | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
tools/testing/selftests/mincore/mincore_selftest.c +23 -2
@@ -12,6 +12,7 @@#include <unistd.h> #include <stdlib.h> #include <sys/mman.h> +#include <sys/mount.h> #include <string.h> #include <fcntl.h>
@@ -283,7 +284,7 @@ TEST(check_file_mmap)free (vec); } - +#define INPUT_MAX 80/* * Test mincore() behavior on a page backed by a tmpfs file. This test * performs the same steps as the previous one. However, we don't expect
@@ -291,6 +292,9 @@ TEST(check_file_mmap)*/ TEST (check_tmpfs_mmap) { +char tmpfs_template[] ="/tmp/check_tmpfs_XXXXXX" ; +const char *tmpfs_loc =mkdtemp (tmpfs_template); +char testfile[INPUT_MAX ];unsigned char *vec;int vec_size;char *addr;
@@ -300,6 +304,10 @@ TEST(check_tmpfs_mmap)int i;int ra_pages =0 ; + ASSERT_NE(NULL, tmpfs_loc) { +TH_LOG ("Can't mkdir tmpfs dentry\n" ); + } + page_size =sysconf (_SC_PAGESIZE); vec_size =FILE_SIZE / page_size;if (FILE_SIZE % page_size)
@@ -311,7 +319,18 @@ TEST(check_tmpfs_mmap) } errno =0 ; - fd =open ("/dev/shm" ,O_TMPFILE |O_RDWR ,0600 ); +/* Do not use large folios for tmpfs mincore testing */ + retval =mount ("tmpfs" , tmpfs_loc,"tmpfs" ,0 ,"huge=never,size=4M" ); + ASSERT_EQ(0, retval) { +TH_LOG ("Unable to mount tmpfs for testing\n" ); + } + + retval =snprintf (testfile,INPUT_MAX ,"%s/test_file" , tmpfs_loc); + ASSERT_GE(INPUT_MAX, retval) { +TH_LOG ("Unable to create a tmpfs for testing\n" ); + } + + fd =open (testfile,O_CREAT |O_RDWR ,0664 ); ASSERT_NE(-1, fd) {TH_LOG ("Can't create temporary file: %s" ,strerror (errno));
@@ -363,6 +382,8 @@ TEST(check_tmpfs_mmap)munmap (addr,FILE_SIZE );close (fd);free (vec); +umount (tmpfs_loc); +rmdir (tmpfs_loc); }TEST_HARNESS_MAIN
Signature · 1 line
2.43.5
Re: [PATCH 1/2] selftests: mincore: fix tmpfs mincore test failure
Quoted 25 lines · Baolin Wang
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expectedra_pages(511) == 0 (0) mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memorycheck_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"The reason for the test case failure is that my system automatically enabled tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always' cmdline. However, the test case still expects the tmpfs mounted on
/dev/shmto allocate small folios, which leads to assertion failures when verifying readahead pages.To fix this issue, remount tmpfs to a new test directory and set the 'huge=never' parameter to avoid allocating large folios, which can pass the test.
Signed-off-by Baolin Wang <[email protected]>--- .../selftests/mincore/mincore_selftest.c | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)
<snip>
Quoted 5 lines
tools/testing/selftests/mincore/mincore_selftest.c +2
-1errno =0 ; - fd =open ("/dev/shm" ,O_TMPFILE |O_RDWR ,0600 ); +/* Do not use large folios for tmpfs mincore testing */ + retval =mount ("tmpfs" , tmpfs_loc,"tmpfs" ,0 ,"huge=never,size=4M" );
tools/testing/selftests/mincore/mincore_selftest.c TEST(check_tmpfs_mmap) · line 333
Quoted 10 lines
tools/testing/selftests/mincore/mincore_selftest.c +10
-0+ ASSERT_EQ(0, retval) { +TH_LOG ("Unable to mount tmpfs for testing\n" ); + } + + retval =snprintf (testfile,INPUT_MAX ,"%s/test_file" , tmpfs_loc); + ASSERT_GE(INPUT_MAX, retval) { +TH_LOG ("Unable to create a tmpfs for testing\n" ); + } + + fd =open (testfile,O_CREAT |O_RDWR ,0664 );
The fd permission is changed from 0600 to 0664, but it probably does not matter.
Quoted 14 lines
tools/testing/selftests/mincore/mincore_selftest.c +2
-0ASSERT_NE(-1, fd) {TH_LOG ("Can't create temporary file: %s" ,strerror (errno));@@ -363,6 +382,8 @@ TEST(check_tmpfs_mmap)munmap (addr,FILE_SIZE );close (fd);free (vec); +umount (tmpfs_loc); +rmdir (tmpfs_loc); }TEST_HARNESS_MAIN Signature · 1 line
2.43.5
Otherwise, LGTM. Reviewed-by: Zi Yan <[email protected]>
--
Best Regards,
Yan, Zi
Re: [PATCH 1/2] selftests: mincore: fix tmpfs mincore test failure
Quoted 40 lines · Zi Yan
Quoted 25 lines · Baolin Wang
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expectedra_pages(511) == 0 (0) mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memorycheck_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"The reason for the test case failure is that my system automatically enabled tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always' cmdline. However, the test case still expects the tmpfs mounted on
/dev/shmto allocate small folios, which leads to assertion failures when verifying readahead pages.To fix this issue, remount tmpfs to a new test directory and set the 'huge=never' parameter to avoid allocating large folios, which can pass the test.
Signed-off-by Baolin Wang <[email protected]>--- .../selftests/mincore/mincore_selftest.c | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)<snip>
Quoted 10 lines
errno = 0;tools/testing/selftests/mincore/mincore_selftest.c +7
-1- fd =open ("/dev/shm" ,O_TMPFILE |O_RDWR ,0600 ); +/* Do not use large folios for tmpfs mincore testing */ + retval =mount ("tmpfs" , tmpfs_loc,"tmpfs" ,0 ,"huge=never,size=4M" ); + ASSERT_EQ(0, retval) { +TH_LOG ("Unable to mount tmpfs for testing\n" ); + } + + retval =snprintf (testfile,INPUT_MAX ,"%s/test_file" , tmpfs_loc);
Quoted 8 lines
tools/testing/selftests/mincore/mincore_selftest.c TEST(check_tmpfs_mmap) · line 333
Quoted 5 lines
tools/testing/selftests/mincore/mincore_selftest.c +5
-0+ ASSERT_GE(INPUT_MAX, retval) { +TH_LOG ("Unable to create a tmpfs for testing\n" ); + } + + fd =open (testfile,O_CREAT |O_RDWR ,0664 );The fd permission is changed from 0600 to 0664, but it probably does not matter.
It is just a temp file, so it doesn't matter.
Quoted 12 lines
Quoted 12 lines
ASSERT_NE(-1, fd) { TH_LOG("Can't create temporary file: %s", strerror(errno));tools/testing/selftests/mincore/mincore_selftest.c +2
-0@@ -363,6 +382,8 @@ TEST(check_tmpfs_mmap)munmap (addr,FILE_SIZE );close (fd);free (vec); +umount (tmpfs_loc); +rmdir (tmpfs_loc); }
Quoted 5 lines
Quoted 3 lines
tools/testing/selftests/mincore/mincore_selftest.c +0
-0TEST_HARNESS_MAIN Signature · 1 line
2.43.5Otherwise, LGTM. Reviewed-by: Zi Yan <[email protected]>
Thanks for reviewing.
Re: [PATCH 1/2] selftests: mincore: fix tmpfs mincore test failure
In reply to Baolin WangQuoted 88 lines · Baolin Wang
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expectedra_pages(511) == 0 (0) mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memorycheck_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"The reason for the test case failure is that my system automatically enabled tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always' cmdline. However, the test case still expects the tmpfs mounted on
/dev/shmto allocate small folios, which leads to assertion failures when verifying readahead pages.To fix this issue, remount tmpfs to a new test directory and set the 'huge=never' parameter to avoid allocating large folios, which can pass the test.
Signed-off-by Baolin Wang <[email protected]>--- .../selftests/mincore/mincore_selftest.c | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)tools/testing/selftests/mincore/mincore_selftest.c +21
-2@@ -12,6 +12,7 @@#include <unistd.h> #include <stdlib.h> #include <sys/mman.h> +#include <sys/mount.h> #include <string.h> #include <fcntl.h> @@ -283,7 +284,7 @@ TEST(check_file_mmap)free (vec); } - +#define INPUT_MAX 80/* * Test mincore() behavior on a page backed by a tmpfs file. This test * performs the same steps as the previous one. However, we don't expect @@ -291,6 +292,9 @@ TEST(check_file_mmap)*/ TEST (check_tmpfs_mmap) { +char tmpfs_template[] ="/tmp/check_tmpfs_XXXXXX" ; +const char *tmpfs_loc =mkdtemp (tmpfs_template); +char testfile[INPUT_MAX ];unsigned char *vec;int vec_size;char *addr;@@ -300,6 +304,10 @@ TEST(check_tmpfs_mmap)int i;int ra_pages =0 ; + ASSERT_NE(NULL, tmpfs_loc) { +TH_LOG ("Can't mkdir tmpfs dentry\n" ); + } + page_size =sysconf (_SC_PAGESIZE); vec_size =FILE_SIZE / page_size;if (FILE_SIZE % page_size)@@ -311,7 +319,18 @@ TEST(check_tmpfs_mmap) } errno =0 ; - fd =open ("/dev/shm" ,O_TMPFILE |O_RDWR ,0600 ); +/* Do not use large folios for tmpfs mincore testing */ + retval =mount ("tmpfs" , tmpfs_loc,"tmpfs" ,0 ,"huge=never,size=4M" ); + ASSERT_EQ(0, retval) { +TH_LOG ("Unable to mount tmpfs for testing\n" ); + } + + retval =snprintf (testfile,INPUT_MAX ,"%s/test_file" , tmpfs_loc); + ASSERT_GE(INPUT_MAX, retval) { +TH_LOG ("Unable to create a tmpfs for testing\n" ); + } + + fd =open (testfile,O_CREAT |O_RDWR ,0664 ); ASSERT_NE(-1, fd) {TH_LOG ("Can't create temporary file: %s" ,strerror (errno));
tools/testing/selftests/mincore/mincore_selftest.c TEST(check_tmpfs_mmap) · line 389
Quoted 8 lines
tools/testing/selftests/mincore/mincore_selftest.c +2
-0@@ -363,6 +382,8 @@ TEST(check_tmpfs_mmap)munmap (addr,FILE_SIZE );close (fd);free (vec); +umount (tmpfs_loc); +rmdir (tmpfs_loc); }TEST_HARNESS_MAIN
Is there anything that cleans up the mount in case something goes wrong (we run into an assertion), or will the directory+mount stick around forever?
But I also wonder whether check_tmpfs_mmap() should be changed to live with the fact that readahead ("faultaround") could now happen. What's the reason for not doing that?
Signature · 3 lines
Cheers, David / dhildenb
Re: [PATCH 1/2] selftests: mincore: fix tmpfs mincore test failure
Quoted 87 lines · David Hildenbrand
Quoted 86 lines · Baolin Wang
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expectedra_pages(511) == 0 (0) mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memorycheck_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"The reason for the test case failure is that my system automatically enabled tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always' cmdline. However, the test case still expects the tmpfs mounted on
/dev/shmto allocate small folios, which leads to assertion failures when verifying readahead pages.To fix this issue, remount tmpfs to a new test directory and set the 'huge=never' parameter to avoid allocating large folios, which can pass the test.
Signed-off-by Baolin Wang <[email protected]>---
.../selftests/mincore/mincore_selftest.c | 25 +++++++++++++++++--1 file changed, 23 insertions(+), 2 deletions(-)tools/testing/selftests/mincore/mincore_selftest.c +21
-2@@ -12,6 +12,7 @@ #include <unistd.h> #include <stdlib.h> #include <sys/mman.h> +#include <sys/mount.h> #include <string.h> #include <fcntl.h>@@ -283,7 +284,7 @@ TEST(check_file_mmap) free(vec); } - +#define INPUT_MAX 80 /** Test mincore() behavior on a page backed by a tmpfs file. This test * performs the same steps as the previous one. However, we don't expect @@ -291,6 +292,9 @@ TEST(check_file_mmap)*/ TEST(check_tmpfs_mmap) { + char tmpfs_template[] = "/tmp/check_tmpfs_XXXXXX"; + const char *tmpfs_loc = mkdtemp(tmpfs_template); + char testfile[INPUT_MAX]; unsigned char *vec; int vec_size; char *addr;@@ -300,6 +304,10 @@ TEST(check_tmpfs_mmap) int i; int ra_pages = 0; + ASSERT_NE(NULL, tmpfs_loc) { + TH_LOG("Can't mkdir tmpfs dentry\n"); + } + page_size = sysconf(_SC_PAGESIZE); vec_size = FILE_SIZE / page_size; if (FILE_SIZE % page_size)@@ -311,7 +319,18 @@ TEST(check_tmpfs_mmap) } errno = 0; - fd = open("/dev/shm", O_TMPFILE | O_RDWR, 0600); + /* Do not use large folios for tmpfs mincore testing */ + retval = mount("tmpfs", tmpfs_loc, "tmpfs", 0,"huge=never,size=4M" ); + ASSERT_EQ(0, retval) { + TH_LOG("Unable to mount tmpfs for testing\n"); + } + + retval = snprintf(testfile, INPUT_MAX, "%s/test_file", tmpfs_loc); + ASSERT_GE(INPUT_MAX, retval) { + TH_LOG("Unable to create a tmpfs for testing\n"); + } + + fd = open(testfile, O_CREAT|O_RDWR, 0664); ASSERT_NE(-1, fd) { TH_LOG("Can't create temporary file: %s", strerror(errno));@@ -363,6 +382,8 @@ TEST(check_tmpfs_mmap) munmap(addr, FILE_SIZE);
Quoted 8 lines
Quoted 6 lines
tools/testing/selftests/mincore/mincore_selftest.c +2
-0close(fd); free(vec); + umount(tmpfs_loc); + rmdir(tmpfs_loc); }
TEST_HARNESS_MAINIs there anything that cleans up the mount in case something goes wrong (we run into an assertion), or will the directory+mount stick around forever?
Good point, will cleanup the mount in the next version.
Quoted 2 lines
But I also wonder whether
check_tmpfs_mmap()should be changed to live with the fact that readahead ("faultaround") could now happen. What's the reason for not doing that?
From this test case's description, it doesn't expect any readahead. "
/*
* Test mincore() behavior on a page backed by a tmpfs file. This test
* performs the same steps as the previous one. However, we don't expect
* any readahead in this case.
*/
"
Maybe adding a new test case to expect the readahead for tmpfs file.
Re: [PATCH 1/2] selftests: mincore: fix tmpfs mincore test failure
Quoted 108 lines · Baolin Wang
Quoted 96 lines · David Hildenbrand
Quoted 95 lines · Baolin Wang
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expectedra_pages(511) == 0 (0) mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memorycheck_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"The reason for the test case failure is that my system automatically enabled
tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always'
cmdline. However, the test case still expects the tmpfs mounted on/dev/shmto
allocate small folios, which leads to assertion failures when verifying readahead
pages.To fix this issue, remount tmpfs to a new test directory and set the 'huge=never'
parameter to avoid allocating large folios, which can pass the test.Signed-off-by Baolin Wang <[email protected]>--- .../selftests/mincore/mincore_selftest.c | 25 +++++++++++++++++-- 1 file changed, 23 insertions(+), 2 deletions(-)tools/testing/selftests/mincore/mincore_selftest.c +2
-1@@ -12,6 +12,7 @@ #include <unistd.h> #include <stdlib.h> #include <sys/mman.h> +#include <sys/mount.h> #include <string.h> #include <fcntl.h>@@ -283,7 +284,7 @@ TEST(check_file_mmap) free(vec); } - +#define INPUT_MAX 80 /** Test mincore() behavior on a page backed by a tmpfs file. This test * performs the same steps as the previous one. However, we don't expect
tools/testing/selftests/mincore/mincore_selftest.c +19
-1@@ -291,6 +292,9 @@ TEST(check_file_mmap)*/ TEST(check_tmpfs_mmap) { + char tmpfs_template[] = "/tmp/check_tmpfs_XXXXXX"; + const char *tmpfs_loc = mkdtemp(tmpfs_template); + char testfile[INPUT_MAX]; unsigned char *vec; int vec_size; char *addr;@@ -300,6 +304,10 @@ TEST(check_tmpfs_mmap) int i; int ra_pages = 0; + ASSERT_NE(NULL, tmpfs_loc) { + TH_LOG("Can't mkdir tmpfs dentry\n"); + } + page_size = sysconf(_SC_PAGESIZE); vec_size = FILE_SIZE / page_size; if (FILE_SIZE % page_size)@@ -311,7 +319,18 @@ TEST(check_tmpfs_mmap) } errno = 0; - fd = open("/dev/shm", O_TMPFILE | O_RDWR, 0600); + /* Do not use large folios for tmpfs mincore testing */ + retval = mount("tmpfs", tmpfs_loc, "tmpfs", 0,"huge=never,size=4M" ); + ASSERT_EQ(0, retval) { + TH_LOG("Unable to mount tmpfs for testing\n"); + } + + retval = snprintf(testfile, INPUT_MAX, "%s/test_file", tmpfs_loc); + ASSERT_GE(INPUT_MAX, retval) { + TH_LOG("Unable to create a tmpfs for testing\n"); + } + + fd = open(testfile, O_CREAT|O_RDWR, 0664); ASSERT_NE(-1, fd) { TH_LOG("Can't create temporary file: %s", strerror(errno));@@ -363,6 +382,8 @@ TEST(check_tmpfs_mmap) munmap(addr, FILE_SIZE); close(fd); free(vec);Quoted 8 lines
tools/testing/selftests/mincore/mincore_selftest.c TEST(check_tmpfs_mmap) · line 389
Quoted 4 lines
tools/testing/selftests/mincore/mincore_selftest.c +2
-0+ umount(tmpfs_loc); + rmdir(tmpfs_loc); } TEST_HARNESS_MAINIs there anything that cleans up the mount in case something goes wrong (we run into an assertion), or will the directory+mount stick around forever?
Quoted 8 lines
Good point, will cleanup the mount in the next version.
Quoted 4 lines
But I also wonder whether
check_tmpfs_mmap()should be changed to live with the fact that readahead ("faultaround") could now happen. What's the reason for not doing that?From this test case's description, it doesn't expect any readahead.
Yes, but why are we testing for that *at all*? We don't make such assumptions/tests for anon memmory ("no faultaround happened").
Why not simply remove the "We expect only that page to be fetched into memory." documentation + checking?
Signature · 3 lines
Cheers, David / dhildenb
Re: [PATCH 1/2] selftests: mincore: fix tmpfs mincore test failure
Quoted 117 lines · David Hildenbrand
Quoted 116 lines · Baolin Wang
Quoted 97 lines · David Hildenbrand
Quoted 96 lines · Baolin Wang
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expectedra_pages(511) == 0 (0) mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memorycheck_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"The reason for the test case failure is that my system automatically enabled
tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always'
cmdline. However, the test case still expects the tmpfs mounted on/dev/shmto
allocate small folios, which leads to assertion failures when verifying readahead
pages.To fix this issue, remount tmpfs to a new test directory and set the 'huge=never'
parameter to avoid allocating large folios, which can pass the test.Signed-off-by Baolin Wang <[email protected]>---
.../selftests/mincore/mincore_selftest.c | 25
+++++++++++++++++--1 file changed, 23 insertions(+), 2 deletions(-)tools/testing/selftests/mincore/mincore_selftest.c +2
-1@@ -12,6 +12,7 @@ #include <unistd.h> #include <stdlib.h> #include <sys/mman.h> +#include <sys/mount.h> #include <string.h> #include <fcntl.h>@@ -283,7 +284,7 @@ TEST(check_file_mmap) free(vec); } - +#define INPUT_MAX 80 /** Test mincore() behavior on a page backed by a tmpfs file. This test * performs the same steps as the previous one. However, we don't expect
tools/testing/selftests/mincore/mincore_selftest.c +19
-1@@ -291,6 +292,9 @@ TEST(check_file_mmap)*/ TEST(check_tmpfs_mmap) { + char tmpfs_template[] = "/tmp/check_tmpfs_XXXXXX"; + const char *tmpfs_loc = mkdtemp(tmpfs_template); + char testfile[INPUT_MAX]; unsigned char *vec; int vec_size; char *addr;@@ -300,6 +304,10 @@ TEST(check_tmpfs_mmap) int i; int ra_pages = 0; + ASSERT_NE(NULL, tmpfs_loc) { + TH_LOG("Can't mkdir tmpfs dentry\n"); + } + page_size = sysconf(_SC_PAGESIZE); vec_size = FILE_SIZE / page_size; if (FILE_SIZE % page_size)@@ -311,7 +319,18 @@ TEST(check_tmpfs_mmap) } errno = 0; - fd = open("/dev/shm", O_TMPFILE | O_RDWR, 0600); + /* Do not use large folios for tmpfs mincore testing */ + retval = mount("tmpfs", tmpfs_loc, "tmpfs", 0,"huge=never,size=4M" ); + ASSERT_EQ(0, retval) { + TH_LOG("Unable to mount tmpfs for testing\n"); + } + + retval = snprintf(testfile, INPUT_MAX, "%s/test_file", tmpfs_loc); + ASSERT_GE(INPUT_MAX, retval) { + TH_LOG("Unable to create a tmpfs for testing\n"); + } + + fd = open(testfile, O_CREAT|O_RDWR, 0664); ASSERT_NE(-1, fd) { TH_LOG("Can't create temporary file: %s", strerror(errno));@@ -363,6 +382,8 @@ TEST(check_tmpfs_mmap) munmap(addr, FILE_SIZE); close(fd); free(vec);Quoted 8 lines
Quoted 4 lines
tools/testing/selftests/mincore/mincore_selftest.c +2
-0+ umount(tmpfs_loc); + rmdir(tmpfs_loc); }
TEST_HARNESS_MAINIs there anything that cleans up the mount in case something goes wrong (we run into an assertion), or will the directory+mount stick around forever?
Good point, will cleanup the mount in the next version.
Quoted 4 lines
But I also wonder whether
check_tmpfs_mmap()should be changed to live with the fact that readahead ("faultaround") could now happen. What's the reason for not doing that?
Quoted 5 lines
Quoted 1 line
From this test case's description, it doesn't expect any readahead.
Yes, but why are we testing for that *at all*? We don't make such assumptions/tests for anon memmory ("no faultaround happened").
Why not simply remove the "We expect only that page to be fetched into memory." documentation + checking?
OK. I'm fine with dropping the readahead check. Thanks.
PATCH 2/2 mm: mincore: use folio_pte_batch() to batch process large folios
In reply to Baolin WangWhen I tested the mincore() syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is the mincore_pte_range() still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.
Thus we can use folio_pte_batch() to get the batch number of the present contiguous PTEs, which can improve the performance. I tested the mincore() syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:
w/o patch w/ patch changes
6022us 1115us +81%
Moreover, I also tested mincore() with disabling mTHP/THP, and did not see any obvious regression.
--- mm/mincore.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)
mm/mincore.c +22 -5
@@ -21,6 +21,7 @@#include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb (pte_t *pte,unsigned long hmask,unsigned long addr,unsigned long end,struct mm_walk *walk)
@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,pte_t *ptep;unsigned char *vec = walk->private;int nr = (end - addr) >>PAGE_SHIFT ; +int step, i; ptl =pmd_trans_huge_lock (pmd, vma);if (ptl) {
@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action =ACTION_AGAIN ;return 0 ; } -for (; addr != end; ptep++, addr +=PAGE_SIZE ) { +for (; addr != end; ptep += step, addr += step *PAGE_SIZE ) {pte_t pte =ptep_get (ptep); + step =1 ;/* We need to do cache lookup too for pte markers */ if (pte_none_mostly (pte))__mincore_unmapped_range (addr, addr +PAGE_SIZE , vma, vec); -else if (pte_present (pte)) - *vec =1 ; -else {/* pte is a swap entry */ +else if (pte_present (pte)) { +if (pte_batch_hint (ptep, pte) >1 ) { +struct folio *folio =vm_normal_folio (vma, addr, pte); + +if (folio &&folio_test_large (folio)) { +const fpb_t fpb_flags =FPB_IGNORE_DIRTY | +FPB_IGNORE_SOFT_DIRTY ; +int max_nr = (end - addr) /PAGE_SIZE ; + + step =folio_pte_batch (folio, addr, ptep, pte, + max_nr, fpb_flags,NULL ,NULL ,NULL ); + } + } + +for (i =0 ; i < step; i++) + vec[i] =1 ; + }else {/* pte is a swap entry */ swp_entry_t entry =pte_to_swp_entry (pte);if (non_swap_entry (entry)) {
@@ -146,7 +163,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,#endif } } - vec++; + vec += step; }pte_unmap_unlock (ptep -1 , ptl); out:
Signature · 1 line
2.43.5
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 8 lines · Baolin Wang
mm/mincore.c +1
-1@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action =ACTION_AGAIN ;return 0 ; } -for (; addr != end; ptep++, addr +=PAGE_SIZE ) { +for (; addr != end; ptep += step, addr += step *PAGE_SIZE ) {pte_t pte =ptep_get (ptep);
mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, · line 132
Quoted 10 lines
mm/mincore.c +3
-3+ step =1 ;/* We need to do cache lookup too for pte markers */ if (pte_none_mostly (pte))__mincore_unmapped_range (addr, addr +PAGE_SIZE , vma, vec); -else if (pte_present (pte)) - *vec =1 ; -else {/* pte is a swap entry */ +else if (pte_present (pte)) { +if (pte_batch_hint (ptep, pte) >1 ) {
AFAIU, you will only batch if the CONT_PTE is set, but that is only true for arm64, and so we lose the ability to batch in e.g: x86 when we have contiguous entries, right?
So why not have folio_pte_batch take care of it directly without involving pte_batch_hint here?
Signature · 2 lines
Oscar Salvador SUSE Labs
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 24 lines · Oscar Salvador
Quoted 8 lines · Baolin Wang
mm/mincore.c +1
-1@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action =ACTION_AGAIN ;return 0 ; } -for (; addr != end; ptep++, addr +=PAGE_SIZE ) { +for (; addr != end; ptep += step, addr += step *PAGE_SIZE ) {pte_t pte =ptep_get (ptep);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, · line 132
Quoted 10 lines
mm/mincore.c +3
-3+ step =1 ;/* We need to do cache lookup too for pte markers */ if (pte_none_mostly (pte))__mincore_unmapped_range (addr, addr +PAGE_SIZE , vma, vec); -else if (pte_present (pte)) - *vec =1 ; -else {/* pte is a swap entry */ +else if (pte_present (pte)) { +if (pte_batch_hint (ptep, pte) >1 ) {AFAIU, you will only batch if the
CONT_PTEis set, but that is only true for arm64, and so we lose the ability to batch in e.g: x86 when we have contiguous entries, right?
Quoted 2 lines
So why not have
folio_pte_batchtake care of it directly without involvingpte_batch_hinthere?
Good question, this was the first approach I tried.
However, I found there was a obvious performance regression with small folios (where CONT_PTE is not set). I think the overhead introduced by vm_normal_folio() and folio_pte_batch() is greater than the optimization gained from batch processing small folios.
For large folios where CONT_PTE is set, ptep_get()--->contpte_ptep_get() wastes a significant amount of CPU time, so using folio_pte_batch() can improve the performance obviously.
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
In reply to Baolin WangQuoted 60 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>--- mm/mincore.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +7
-4@@ -21,6 +21,7 @@#include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb (pte_t *pte,unsigned long hmask,unsigned long addr,unsigned long end,struct mm_walk *walk)@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,pte_t *ptep;unsigned char *vec = walk->private;int nr = (end - addr) >>PAGE_SHIFT ; +int step, i; ptl =pmd_trans_huge_lock (pmd, vma);if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action =ACTION_AGAIN ;return 0 ; } -for (; addr != end; ptep++, addr +=PAGE_SIZE ) { +for (; addr != end; ptep += step, addr += step *PAGE_SIZE ) {pte_t pte =ptep_get (ptep); + step =1 ;/* We need to do cache lookup too for pte markers */ if (pte_none_mostly (pte))__mincore_unmapped_range (addr, addr +PAGE_SIZE , vma, vec); -else if (pte_present (pte)) - *vec =1 ; -else {/* pte is a swap entry */ +else if (pte_present (pte)) { +if (pte_batch_hint (ptep, pte) >1 ) { +struct folio *folio =vm_normal_folio (vma, addr, pte);
mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ +if (folio &&folio_test_large (folio)) { +const fpb_t fpb_flags =FPB_IGNORE_DIRTY | +FPB_IGNORE_SOFT_DIRTY ; +int max_nr = (end - addr) /PAGE_SIZE ; + + step =folio_pte_batch (folio, addr, ptep, pte, + max_nr, fpb_flags,NULL ,NULL ,NULL ); + } + }
You could simplify to the following, I think, to avoid needing to grab the folio and call folio_pte_batch():
else if (pte_present(pte)) {
int max_nr = (end - addr) / PAGE_SIZE;
step = min(pte_batch_hint(ptep, pte), max_nr);
} ...I expect the regression you are seeing here is all due to calling ptep_get() for every pte in the contpte batch, which will cause 16 memory reads per pte (to gather the access/dirty bits). For small folios its just 1 read per pte. pte_batch_hint() will skip forward in blocks of 16 so you now end up with the same number as for the small folio case. You don't need all the fancy extras that folio_pte_batch() gives you here.
Thanks,
Ryan
Quoted 16 lines
mm/mincore.c +5
-1+ +for (i =0 ; i < step; i++) + vec[i] =1 ; + }else {/* pte is a swap entry */ swp_entry_t entry =pte_to_swp_entry (pte);if (non_swap_entry (entry)) {@@ -146,7 +163,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,#endif } } - vec++; + vec += step; }pte_unmap_unlock (ptep -1 , ptl); out:
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 7 lines · Ryan Roberts
You could simplify to the following, I think, to avoid needing to grab the folio and call
folio_pte_batch():else if (pte_present(pte)) { int max_nr = (end - addr) / PAGE_SIZE; step = min(pte_batch_hint(ptep, pte), max_nr); } ...
Yes, I think this makes much more sense, in the end, as you said, we do not really need what folio_pte_batch gives us here.
With the API I am working on, batching will be done in there internally, so we will not have to expose this here.
Signature · 2 lines
Oscar Salvador SUSE Labs
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
In reply to Ryan RobertsQuoted 75 lines · Ryan Roberts
Quoted 60 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>--- mm/mincore.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +7
-4@@ -21,6 +21,7 @@#include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb (pte_t *pte,unsigned long hmask,unsigned long addr,unsigned long end,struct mm_walk *walk)@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,pte_t *ptep;unsigned char *vec = walk->private;int nr = (end - addr) >>PAGE_SHIFT ; +int step, i; ptl =pmd_trans_huge_lock (pmd, vma);if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action =ACTION_AGAIN ;return 0 ; } -for (; addr != end; ptep++, addr +=PAGE_SIZE ) { +for (; addr != end; ptep += step, addr += step *PAGE_SIZE ) {pte_t pte =ptep_get (ptep); + step =1 ;/* We need to do cache lookup too for pte markers */ if (pte_none_mostly (pte))__mincore_unmapped_range (addr, addr +PAGE_SIZE , vma, vec); -else if (pte_present (pte)) - *vec =1 ; -else {/* pte is a swap entry */ +else if (pte_present (pte)) { +if (pte_batch_hint (ptep, pte) >1 ) { +struct folio *folio =vm_normal_folio (vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ +if (folio &&folio_test_large (folio)) { +const fpb_t fpb_flags =FPB_IGNORE_DIRTY | +FPB_IGNORE_SOFT_DIRTY ; +int max_nr = (end - addr) /PAGE_SIZE ; + + step =folio_pte_batch (folio, addr, ptep, pte, + max_nr, fpb_flags,NULL ,NULL ,NULL ); + } + }You could simplify to the following, I think, to avoid needing to grab the folio and call
folio_pte_batch():
Quoted 8 lines
else if (pte_present(pte)) { int max_nr = (end - addr) / PAGE_SIZE; step = min(pte_batch_hint(ptep, pte), max_nr); } ...I expect the regression you are seeing here is all due to calling
ptep_get()for every pte in the contpte batch, which will cause 16 memory reads per pte (to gather the access/dirty bits). For small folios its just 1 read per pte.
Right.
Quoted 3 lines
pte_batch_hint()will skip forward in blocks of 16 so you now end up with the same number as for the small folio case. You don't need all the fancy extras thatfolio_pte_batch()gives you here.
Sounds reasonable. Your suggestion looks simple, but my method can batch the whole large folio (such as large folios containing more than 16 contiguous PTEs) at once. Anyway, let me do some performance measurements for your suggestion. Thanks.
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 88 lines · Baolin Wang
Quoted 74 lines · Ryan Roberts
Quoted 59 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>---
mm/mincore.c| 27 ++++++++++++++++++++++-----1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +1
-0@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned long addr,
unsigned long end, structmm_walk*walk)mm/mincore.c +5
-4@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep; unsigned char *vec = walk->private; int nr = (end - addr) >> PAGE_SHIFT; + int step, i; ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN; return 0; } - for (; addr != end; ptep++, addr += PAGE_SIZE) { + for (; addr != end; ptep += step, addr += step * PAGE_SIZE) { pte_t pte = ptep_get(ptep); + step = 1; /* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte)) __mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec); - else if (pte_present(pte)) - *vec = 1; - else { /* pte is a swap entry */ + else if (pte_present(pte)) { + if (pte_batch_hint(ptep, pte) > 1) { + struct folio *folio = vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }You could simplify to the following, I think, to avoid needing to grab the folio and call
folio_pte_batch():Quoted 8 lines
else if (
pte_present(pte)) {
intmax_nr= (end - addr) /PAGE_SIZE; step =min(pte_batch_hint(ptep, pte), max_nr); } ...I expect the regression you are seeing here is all due to calling
ptep_get()for every pte in the contpte batch, which will cause 16 memory reads per pte (to gather the access/dirty bits). For small folios its just 1 read per pte.Right.
Quoted 7 lines
Quoted 3 lines
pte_batch_hint()will skip forward in blocks of 16 so you now end up with the same number as for the small folio case. You don't need all the fancy extras thatfolio_pte_batch()gives you here.Sounds reasonable. Your suggestion looks simple, but my method can batch the whole large folio (such as large folios containing more than 16 contiguous PTEs) at once.
Sure but folio_pte_batch() just implements that with another loop that calls pte_batch_hint(), so it all amounts to the same thing. In fact there are some extra checks in folio_pte_batch() that you don't need so it might be a bit slower.
Thanks,
Ryan
Quoted 2 lines
Anyway, let me do some performance measurements for your suggestion. Thanks.
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 93 lines · Ryan Roberts
Quoted 92 lines · Baolin Wang
Quoted 74 lines · Ryan Roberts
Quoted 59 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>--- mm/mincore.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +6
-4@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned long addr, unsigned long end, struct mm_walk *walk)@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep; unsigned char *vec = walk->private; int nr = (end - addr) >> PAGE_SHIFT; + int step, i; ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN; return 0; } - for (; addr != end; ptep++, addr += PAGE_SIZE) { + for (; addr != end; ptep += step, addr += step * PAGE_SIZE) { pte_t pte = ptep_get(ptep); + step = 1; /* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte)) __mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec); - else if (pte_present(pte)) - *vec = 1; - else { /* pte is a swap entry */ + else if (pte_present(pte)) { + if (pte_batch_hint(ptep, pte) > 1) { + struct folio *folio = vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }You could simplify to the following, I think, to avoid needing to grab the folio and call
folio_pte_batch():Quoted 8 lines
else if (
pte_present(pte)) {
intmax_nr= (end - addr) /PAGE_SIZE; step =min(pte_batch_hint(ptep, pte), max_nr); } ...I expect the regression you are seeing here is all due to calling
ptep_get()for every pte in the contpte batch, which will cause 16 memory reads per pte (to gather the access/dirty bits). For small folios its just 1 read per pte.Right.
Quoted 3 lines
pte_batch_hint()will skip forward in blocks of 16 so you now end up with the same number as for the small folio case. You don't need all the fancy extras thatfolio_pte_batch()gives you here.
Quoted 7 lines
Quoted 3 lines
Sounds reasonable. Your suggestion looks simple, but my method can batch the whole large folio (such as large folios containing more than 16 contiguous PTEs) at once.
Sure but
folio_pte_batch()just implements that with another loop that callspte_batch_hint(), so it all amounts to the same thing. In fact there are some extra checks infolio_pte_batch()that you don't need so it might be a bit slower.
I don't enjoy open-coding the batching, especially if only cont-pte users will benefit from it. But I also don't enjoy the open-coded pte_batch_hint() :)
But we really don't need the folio here, so I assume the short variant you (Ryan) suggest is alright to just avoid the ptep_get().
As Oscar says, these details might soon be hidden inside a new page table walker API (even though it will likely end up using folio_pte_batch() internally, TBD).
Signature · 3 lines
Cheers, David / dhildenb
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 97 lines · David Hildenbrand
Quoted 96 lines · Ryan Roberts
Quoted 95 lines · Baolin Wang
Quoted 77 lines · Ryan Roberts
Quoted 62 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>---
mm/mincore.c| 27 ++++++++++++++++++++++-----1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +1
-0@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned long addr,
unsigned long end, structmm_walk*walk)mm/mincore.c +0
-0@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd,unsigned long
addr, unsigned long end,
pte_t*ptep;
unsigned char *vec =walk->private;
int nr = (end - addr) >>PAGE_SHIFT;
+ int step, i;
ptl =pmd_trans_huge_lock(pmd, vma);
if (ptl) {mm/mincore.c +0
-0@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd,unsigned long
addr, unsigned long end,
walk->action=ACTION_AGAIN;
return 0;
}
- for (; addr != end; ptep++, addr +=PAGE_SIZE) {
+ for (; addr != end; ptep += step, addr += step *PAGE_SIZE) {pte_tpte =ptep_get(ptep);
+ step = 1;
/* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte))__mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec);
- else if (pte_present(pte))
- *vec = 1;
- else { /* pte is a swap entry */
+ else if (pte_present(pte)) {
+ if (pte_batch_hint(ptep, pte)> 1) {
+ struct folio *folio =vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }You could simplify to the following, I think, to avoid needing to grab the folio and call
folio_pte_batch():Quoted 8 lines
else if (
pte_present(pte)) {
intmax_nr= (end - addr) /PAGE_SIZE; step =min(pte_batch_hint(ptep, pte), max_nr); } ...I expect the regression you are seeing here is all due to calling
ptep_get()for every pte in the contpte batch, which will cause 16 memory reads per pte (to gather the access/dirty bits). For small folios its just 1 read per pte.Right.
Quoted 3 lines
pte_batch_hint()will skip forward in blocks of 16 so you now end up with the same number as for the small folio case. You don't need all the fancy extras thatfolio_pte_batch()gives you here.
Quoted 7 lines
Quoted 7 lines
Quoted 3 lines
Sounds reasonable. Your suggestion looks simple, but my method can batch the whole large folio (such as large folios containing more than 16 contiguous PTEs) at once.
Sure but
folio_pte_batch()just implements that with another loop that callspte_batch_hint(), so it all amounts to the same thing. In fact there are some extra checks infolio_pte_batch()that you don't need so it might be a bit slower.
Right. I tested your suggestion, yes, much better.
Quoted 5 lines
I don't enjoy open-coding the batching, especially if only cont-pte users will benefit from it. But I also don't enjoy the open-coded
pte_batch_hint():)But we really don't need the folio here, so I assume the short variant you (Ryan) suggest is alright to just avoid the
ptep_get().As Oscar says, these details might soon be hidden inside a new page table walker API (even though it will likely end up using
folio_pte_batch()internally, TBD).
OK. I can drop this patch if it will be addressed in the following patches.
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 105 lines · Baolin Wang
Quoted 102 lines · David Hildenbrand
Quoted 101 lines · Ryan Roberts
Quoted 99 lines · Baolin Wang
Quoted 81 lines · Ryan Roberts
Quoted 60 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>---
mm/mincore.c| 27 ++++++++++++++++++++++-----1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +1
-0@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned long
addr,
unsigned long end, structmm_walk*walk)mm/mincore.c +5
-4@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep; unsigned char *vec = walk->private; int nr = (end - addr) >> PAGE_SHIFT; + int step, i; ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN; return 0; } - for (; addr != end; ptep++, addr += PAGE_SIZE) { + for (; addr != end; ptep += step, addr += step * PAGE_SIZE) { pte_t pte = ptep_get(ptep); + step = 1; /* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte)) __mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec); - else if (pte_present(pte)) - *vec = 1; - else { /* pte is a swap entry */ + else if (pte_present(pte)) { + if (pte_batch_hint(ptep, pte) > 1) { + struct folio *folio = vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }You could simplify to the following, I think, to avoid needing to grab the folio
and callfolio_pte_batch():else if (
pte_present(pte)) {
intmax_nr= (end - addr) /PAGE_SIZE; step =min(pte_batch_hint(ptep, pte), max_nr); } ...Quoted 4 lines
I expect the regression you are seeing here is all due to calling
ptep_get()for
every pte in the contpte batch, which will cause 16 memory reads per pte (to gather the access/dirty bits). For small folios its just 1 read per pte.Right.
Quoted 3 lines
pte_batch_hint()will skip forward in blocks of 16 so you now end up with the same number as for the small folio case. You don't need all the fancy extras thatfolio_pte_batch()gives you here.Sounds reasonable. Your suggestion looks simple, but my method can batch the whole large folio (such as large folios containing more than 16 contiguous PTEs)
at once.
Quoted 9 lines
Quoted 4 lines
Quoted 4 lines
Sure but
folio_pte_batch()just implements that with another loop that callspte_batch_hint(), so it all amounts to the same thing. In fact there are some extra checks infolio_pte_batch()that you don't need so it might be a bit slower.Right. I tested your suggestion, yes, much better.
Quoted 2 lines
I don't enjoy open-coding the batching, especially if only cont-pte users will benefit from it. But I also don't enjoy the open-coded
pte_batch_hint():)
I'm not quite sure what you are saying here? Is:
else if (pte_present(pte)) {
int max_nr = (end - addr) / PAGE_SIZE;
step = min(pte_batch_hint(ptep, pte), max_nr);
}really to be considered open-coding? pte_batch_hint() is a generic API and it feels pretty reasonable to use it in this situation?
Quoted 3 lines
Quoted 3 lines
But we really don't need the folio here, so I assume the short variant you (Ryan) suggest is alright to just avoid the
ptep_get().
Yes, that would get my vote.
Quoted 6 lines
Quoted 4 lines
As Oscar says, these details might soon be hidden inside a new page table walker API (even though it will likely end up using
folio_pte_batch()internally, TBD).OK. I can drop this patch if it will be addressed in the following patches.
I'm assuming a large chunk of the speedup is actually fixing a regression (it would be good to see the numbers for non-mTHP mappings for comparison), so personally I'd prefer we put this patch in now rather than waiting for the new API to land then waiting for someone to get around to converting this user.
Thanks,
Ryan
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
In reply to Baolin WangQuoted 60 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>--- mm/mincore.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +7
-4@@ -21,6 +21,7 @@#include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb (pte_t *pte,unsigned long hmask,unsigned long addr,unsigned long end,struct mm_walk *walk)@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,pte_t *ptep;unsigned char *vec = walk->private;int nr = (end - addr) >>PAGE_SHIFT ; +int step, i; ptl =pmd_trans_huge_lock (pmd, vma);if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action =ACTION_AGAIN ;return 0 ; } -for (; addr != end; ptep++, addr +=PAGE_SIZE ) { +for (; addr != end; ptep += step, addr += step *PAGE_SIZE ) {pte_t pte =ptep_get (ptep); + step =1 ;/* We need to do cache lookup too for pte markers */ if (pte_none_mostly (pte))__mincore_unmapped_range (addr, addr +PAGE_SIZE , vma, vec); -else if (pte_present (pte)) - *vec =1 ; -else {/* pte is a swap entry */ +else if (pte_present (pte)) { +if (pte_batch_hint (ptep, pte) >1 ) { +struct folio *folio =vm_normal_folio (vma, addr, pte);
mm/mincore.c static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ +if (folio &&folio_test_large (folio)) { +const fpb_t fpb_flags =FPB_IGNORE_DIRTY | +FPB_IGNORE_SOFT_DIRTY ; +int max_nr = (end - addr) /PAGE_SIZE ; + + step =folio_pte_batch (folio, addr, ptep, pte, + max_nr, fpb_flags,NULL ,NULL ,NULL ); + } + }
Can we go ahead with this along with [1], that will help us generalize for all arches.
[1] https://lore.kernel.org/all/[email protected]/
(Please replace PAGE_SIZE with 1)
Quoted 16 lines
mm/mincore.c +5
-1+ +for (i =0 ; i < step; i++) + vec[i] =1 ; + }else {/* pte is a swap entry */ swp_entry_t entry =pte_to_swp_entry (pte);if (non_swap_entry (entry)) {@@ -146,7 +163,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,#endif } } - vec++; + vec += step; }pte_unmap_unlock (ptep -1 , ptl); out:
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 74 lines · Dev Jain
Quoted 58 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>---
mm/mincore.c| 27 ++++++++++++++++++++++-----1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +7
-4@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned long addr, unsigned long end, struct mm_walk *walk)@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep; unsigned char *vec = walk->private; int nr = (end - addr) >> PAGE_SHIFT; + int step, i; ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN; return 0; } - for (; addr != end; ptep++, addr += PAGE_SIZE) { + for (; addr != end; ptep += step, addr += step * PAGE_SIZE) { pte_t pte = ptep_get(ptep); + step = 1; /* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte)) __mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec); - else if (pte_present(pte)) - *vec = 1; - else { /* pte is a swap entry */ + else if (pte_present(pte)) { + if (pte_batch_hint(ptep, pte) > 1) { + struct folio *folio = vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }Can we go ahead with this along with [1], that will help us generalize for all arches.
Quoted 2 lines
[1] https://lore.kernel.org/all/[email protected]/
(Please replacePAGE_SIZEwith 1)
As discussed with Ryan, we don’t need to call folio_pte_batch() (something like the code below), so your patch seems unnecessarily complicated. However, David is unhappy about the open-coded pte_batch_hint().
static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned
long addr,
unsigned long end, struct mm_walk *walk)
@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
pte_t *ptep;
unsigned char *vec = walk->private;
int nr = (end - addr) >> PAGE_SHIFT;+ int step, i;
ptl = pmd_trans_huge_lock(pmd, vma);
if (ptl) {
@@ -118,16 +120,21 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
walk->action = ACTION_AGAIN;
return 0;
}
- for (; addr != end; ptep++, addr += PAGE_SIZE) {
+ for (; addr != end; ptep += step, addr += step * PAGE_SIZE) {
pte_t pte = ptep_get(ptep);+ step = 1;
/* We need to do cache lookup too for pte markers */
if (pte_none_mostly(pte))
__mincore_unmapped_range(addr, addr + PAGE_SIZE,
vma, vec);- else if (pte_present(pte))
- *vec = 1;
- else { /* pte is a swap entry */
+ else if (pte_present(pte)) {
+ unsigned int max_nr = (end - addr) / PAGE_SIZE;
+
+ step = min(pte_batch_hint(ptep, pte), max_nr);
+ for (i = 0; i < step; i++)
+ vec[i] = 1;
+ } else { /* pte is a swap entry */
swp_entry_t entry = pte_to_swp_entry(pte);
if (non_swap_entry(entry)) {
@@ -146,7 +153,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
#endif
}
}
- vec++;
+ vec += step;
}
pte_unmap_unlock(ptep - 1, ptl);out:
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 81 lines · Baolin Wang
Quoted 78 lines · Dev Jain
Quoted 61 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()
still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()
syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>--- mm/mincore.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +7
-4@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsignedlong addr, unsigned long end, struct mm_walk *walk)@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep; unsigned char *vec = walk->private; int nr = (end - addr) >> PAGE_SHIFT; + int step, i; ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN; return 0; } - for (; addr != end; ptep++, addr += PAGE_SIZE) { + for (; addr != end; ptep += step, addr += step * PAGE_SIZE) { pte_t pte = ptep_get(ptep); + step = 1; /* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte)) __mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec); - else if (pte_present(pte)) - *vec = 1; - else { /* pte is a swap entry */ + else if (pte_present(pte)) { + if (pte_batch_hint(ptep, pte) > 1) { + struct folio *folio = vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }Can we go ahead with this along with [1], that will help us generalize for all arches.
Quoted 7 lines
Quoted 2 lines
[1] https://lore.kernel.org/all/[email protected]/
(Please replacePAGE_SIZEwith 1)As discussed with Ryan, we don’t need to call
folio_pte_batch()(something like the code below), so your patch seems unnecessarily complicated. However, David is unhappy about the open-codedpte_batch_hint().
I can live with the below :)
Having something more universal does maybe not make sense here. Any form of patching contiguous PTEs (contiguous PFNs) -- whether with folios or not -- is not required here as we really only want to
(a) Identify pte_present() PTEs
(b) Avoid the cost of repeated ptep_get() with cont-pte.
Quoted 51 lines
static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned
long addr,
unsigned long end, structmm_walk*walk)mm/mincore.c +1
-0@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep;unsigned char *vec = walk->private;int nr = (end - addr) >>PAGE_SHIFT ; +int step, i; ptl =pmd_trans_huge_lock (pmd, vma);if (ptl) {mm/mincore.c +9
-4@@ -118,16 +120,21 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN;return 0 ; } -for (; addr != end; ptep++, addr +=PAGE_SIZE ) { +for (; addr != end; ptep += step, addr += step *PAGE_SIZE ) {pte_t pte =ptep_get (ptep); + step =1 ;/* We need to do cache lookup too for pte markers */ if (pte_none_mostly (pte))__mincore_unmapped_range (addr, addr +PAGE_SIZE , vma, vec); -else if (pte_present (pte)) - *vec =1 ; -else {/* pte is a swap entry */ +else if (pte_present (pte)) { +unsigned int max_nr = (end - addr) /PAGE_SIZE ; + + step =min (pte_batch_hint (ptep, pte), max_nr); +for (i =0 ; i < step; i++) + vec[i] =1 ; + }else {/* pte is a swap entry */ swp_entry_t entry =pte_to_swp_entry (pte);if (non_swap_entry(entry)) {mm/mincore.c +1
-1@@ -146,7 +153,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,#endif } } - vec++; + vec += step; }pte_unmap_unlock (ptep -1 , ptl);out:
Signature · 3 lines
Cheers, David / dhildenb
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 90 lines · David Hildenbrand
Quoted 81 lines · Baolin Wang
Quoted 78 lines · Dev Jain
Quoted 61 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()
still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()
syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>---
mm/mincore.c| 27 ++++++++++++++++++++++-----1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +1
-0@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned long addr,
unsigned long end, structmm_walk*walk)mm/mincore.c +6
-4@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep; unsigned char *vec = walk->private; int nr = (end - addr) >> PAGE_SHIFT; + int step, i; ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN; return 0; } - for (; addr != end; ptep++, addr += PAGE_SIZE) { + for (; addr != end; ptep += step, addr += step * PAGE_SIZE) { pte_t pte = ptep_get(ptep); + step = 1; /* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte)) __mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec); - else if (pte_present(pte)) - *vec = 1; - else { /* pte is a swap entry */ + else if (pte_present(pte)) { + if (pte_batch_hint(ptep, pte) > 1) { + struct folio *folio = vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }Can we go ahead with this along with [1], that will help us generalize for all arches.
Quoted 7 lines
Quoted 2 lines
[1] https://lore.kernel.org/all/[email protected]/
(Please replacePAGE_SIZEwith 1)As discussed with Ryan, we don’t need to call
folio_pte_batch()(something like the code below), so your patch seems unnecessarily complicated. However, David is unhappy about the open-codedpte_batch_hint().
Quoted 6 lines
I can live with the below :)
Having something more universal does maybe not make sense here. Any form of patching contiguous PTEs (contiguous PFNs) -- whether with folios or not -- is not required here as we really only want to
(a) Identify
pte_present()PTEs
(b) Avoid the cost of repeatedptep_get()with cont-pte.
Good. I will change the patch and resend it. Thanks.
Re: [PATCH 2/2] mm: mincore: use folio_pte_batch() to batch process large folios
Quoted 95 lines · Baolin Wang
Quoted 92 lines · David Hildenbrand
Quoted 81 lines · Baolin Wang
Quoted 78 lines · Dev Jain
Quoted 61 lines · Baolin Wang
When I tested the
mincore()syscall, I observed that it takes longer with 64K mTHP enabled on my Arm64 server. The reason is themincore_pte_range()
still checks each PTE individually, even when the PTEs are contiguous, which is not efficient.Thus we can use
folio_pte_batch()to get the batch number of the present contiguous PTEs, which can improve the performance. I tested themincore()
syscall with 1G anonymous memory populated with 64K mTHP, and observed an obvious performance improvement:w/o patch w/ patch changes
6022us 1115us +81%Moreover, I also tested
mincore()with disabling mTHP/THP, and did not see any obvious regression.Signed-off-by Baolin Wang <[email protected]>---
mm/mincore.c| 27 ++++++++++++++++++++++-----1 file changed, 22 insertions(+), 5 deletions(-)mm/mincore.c +1
-0@@ -21,6 +21,7 @@ #include <linux/uaccess.h> #include "swap.h" +#include "internal.h" static int mincore_hugetlb(pte_t *pte, unsigned long hmask, unsigned long addr,
unsigned long end, structmm_walk*walk)mm/mincore.c +6
-4@@ -105,6 +106,7 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, pte_t *ptep; unsigned char *vec = walk->private; int nr = (end - addr) >> PAGE_SHIFT; + int step, i; ptl = pmd_trans_huge_lock(pmd, vma); if (ptl) {@@ -118,16 +120,31 @@ static int mincore_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, walk->action = ACTION_AGAIN; return 0; } - for (; addr != end; ptep++, addr += PAGE_SIZE) { + for (; addr != end; ptep += step, addr += step * PAGE_SIZE) { pte_t pte = ptep_get(ptep); + step = 1; /* We need to do cache lookup too for pte markers */ if (pte_none_mostly(pte)) __mincore_unmapped_range(addr, addr + PAGE_SIZE, vma, vec); - else if (pte_present(pte)) - *vec = 1; - else { /* pte is a swap entry */ + else if (pte_present(pte)) { + if (pte_batch_hint(ptep, pte) > 1) { + struct folio *folio = vm_normal_folio(vma, addr, pte);mm/mincore.c static int mincore_pte_range(pmd_t *pmd, · line 143
Quoted 10 lines
mm/mincore.c +10
-0+ + if (folio && folio_test_large(folio)) { + const fpb_t fpb_flags = FPB_IGNORE_DIRTY | + FPB_IGNORE_SOFT_DIRTY; + int max_nr = (end - addr) / PAGE_SIZE; + + step = folio_pte_batch(folio, addr, ptep, pte, + max_nr, fpb_flags, NULL, NULL, NULL); + } + }Can we go ahead with this along with [1], that will help us generalize for all arches.
Quoted 7 lines
Quoted 2 lines
[1] https://lore.kernel.org/all/[email protected]/
(Please replacePAGE_SIZEwith 1)As discussed with Ryan, we don’t need to call
folio_pte_batch()(something like the code below), so your patch seems unnecessarily complicated. However, David is unhappy about the open-codedpte_batch_hint().I can live with the below :)
Quoted 8 lines
Quoted 6 lines
Having something more universal does maybe not make sense here. Any form of patching contiguous PTEs (contiguous PFNs) -- whether with folios or not -- is not required here as we really only want to
(a) Identify
pte_present()PTEs
(b) Avoid the cost of repeatedptep_get()with cont-pte.Good. I will change the patch and resend it. Thanks.
Agreed. Thanks Baolin!