mm: Add /proc/$PID/pageflags
Subsystems (6)
PATCH 1/1 mm: Add /proc/$PID/pageflags
From: Yu Zhao <[email protected]>
This file lets a userspace process know the page flags of each of its virtual pages. It contains a 64-bit set of flags for each virtual page, containing data identical to that emitted by /proc/kpageflags. This allows the user-space task can learn the kpageflags for the pages backing its address-space by consulting one file, without needing to be root.
Example use case is a performance sensitive user-space process querying the hugepage backing of its own memory without the root access required to access /proc/kpageflags, and without accessing /proc/self/smaps_rollup which can be slow and needs to hold mmap_lock.
Similar to /proc/kpageflags, the flags printed out by the kernel for each page are provided by stable_page_flags(), which exports flag bits that are user visible and stable over time.
--- Documentation/admin-guide/mm/pagemap.rst | 9 +- Documentation/filesystems/proc.rst | 5 +- fs/proc/base.c | 2 + fs/proc/internal.h | 1 + fs/proc/task_mmu.c | 158 ++++++++++++++++++----- 5 files changed, 144 insertions(+), 31 deletions(-)
Documentation/admin-guide/mm/pagemap.rst +8 -1
@@ -8,7 +8,7 @@ pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow userspace programs to examine the page tables and related information by reading files in ``/proc``. -There are four components to pagemap: +There are five components to pagemap: * ``/proc/pid/pagemap``. This file lets a userspace process find out which physical frame each virtual page is mapped to. It contains one 64-bit
@@ -82,6 +82,13 @@ number of times a page is mapped. 25. IDLE 26. PGTABLE + * ``/proc/pid/pageflags``. This file lets a userspace process know the page + flags of each of its virtual pages. It contains a 64-bit set of flags for + each virtual page, containing data identical to the one emitted by + /proc/kpageflags listed above. The user-space task can learn the kpageflags + for the pages backing its address-space by consulting one file, without + needing to be root. + * ``/proc/kpagecgroup``. This file contains a 64-bit inode number of the memory cgroup each page is charged to, indexed by PFN. Only available when CONFIG_MEMCG is set.
Documentation/filesystems/proc.rst +4 -1
@@ -155,6 +155,7 @@ usually fail with ESRCH. wchan Present with CONFIG_KALLSYMS=y: it shows the kernel function symbol the task is blocked in - or "0" if not blocked. pagemap Page table + pageflags Process's memory page flag information stack Report full stack trace, enable via CONFIG_STACKTRACE smaps An extension based on maps, showing the memory consumption of each mapping and flags associated with it
@@ -619,7 +620,9 @@ Any other value written to /proc/PID/clear_refs will have no effect. The /proc/pid/pagemap gives the PFN, which can be used to find the pageflags using /proc/kpageflags and number of times a page is mapped using -/proc/kpagecount. For detailed explanation, see +/proc/kpagecount. /proc/pid/pageflags provides the page flags of a process's +virtual pages, so a task can learn the kpageflags for its address space with no +need to be root. For detailed explanation, see Documentation/admin-guide/mm/pagemap.rst. The /proc/pid/numa_maps is an extension based on maps, showing the memory
fs/proc/base.c +2 -0
@@ -3219,6 +3219,7 @@ static const struct pid_entry tgid_base_stuff[] = {REG ("smaps" ,S_IRUGO , proc_pid_smaps_operations),REG ("smaps_rollup" ,S_IRUGO , proc_pid_smaps_rollup_operations),REG ("pagemap" ,S_IRUSR , proc_pagemap_operations), +REG ("pageflags" ,S_IRUGO , proc_pageflags_operations), #endif #ifdef CONFIG_SECURITY DIR("attr", S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations),
@@ -3562,6 +3563,7 @@ static const struct pid_entry tid_base_stuff[] = {REG ("smaps" ,S_IRUGO , proc_pid_smaps_operations),REG ("smaps_rollup" ,S_IRUGO , proc_pid_smaps_rollup_operations),REG ("pagemap" ,S_IRUSR , proc_pagemap_operations), +REG ("pageflags" ,S_IRUGO , proc_pageflags_operations), #endif #ifdef CONFIG_SECURITY DIR("attr", S_IRUGO|S_IXUGO, proc_attr_dir_inode_operations, proc_attr_dir_operations),
fs/proc/internal.h +1 -0
@@ -305,6 +305,7 @@ extern const struct file_operations proc_pid_smaps_operations;extern const struct file_operations proc_pid_smaps_rollup_operations;extern const struct file_operations proc_clear_refs_operations;extern const struct file_operations proc_pagemap_operations; +extern const struct file_operations proc_pageflags_operations;extern unsigned long task_vsize (struct mm_struct *); extern unsigned long task_statm(struct mm_struct *,
fs/proc/task_mmu.c +129 -29
225 lines not on this page · raw message
--
2.33.0.1079.g6e70778dc9-goog
Quoted 8 lines · Mina Almasry
From: Yu Zhao <[email protected]>
This file lets a userspace process know the page flags of each of its virtual pages. It contains a 64-bit set of flags for each virtual page, containing data identical to that emitted by
/proc/kpageflags. This allows the user-space task can learn the kpageflags for the pages backing its address-space by consulting one file, without needing to be root.
Quoted 4 lines
Example use case is a performance sensitive user-space process querying the hugepage backing of its own memory without the root access required to access
/proc/kpageflags, and without accessing/proc/self/smaps_rollupwhich can be slow and needs to holdmmap_lock.
Can you elaborate on
a) The target use case. Are you primarily interested to see if a page given base page is head or tail?
b) Your mmap_lock comment. pagemap_read() needs to hold the mmap lock in read mode while walking process page tables via walk_page_range().
Also, do you have a rough performance comparison?
Quoted 4 lines
Similar to
/proc/kpageflags, the flags printed out by the kernel for each page are provided bystable_page_flags(), which exports flag bits that are user visible and stable over time.
It exports flags (documented for pageflags_read()) that are not applicable to processes, like OFFLINE. BUDDY, SLAB, PGTABLE ... and can never happen. Some of these kpageflags are not even page->flags, they include abstracted types we use for physical memory pages based on other struct page members (OFFLINE, BUDDY, MMAP, PGTABLE, ...). This feels wrong.
Also, to me it feels like we are exposing too much internal information to the user, essentially making it ABI that user space processes will rely on.
Did you investigate
a) Reducing the flags we expose to a bare minimum necessary for your use case (and actually applicable to mmaped pages).
b) Extending pagemap output instead.
You seem to be interested in the "hugepage backing", which smells like "what is mapped" as in "pagemap".
Signature · 3 lines
Thanks, David / dhildenb
Quoted 15 lines · David Hildenbrand
Quoted 8 lines · Mina Almasry
From: Yu Zhao <[email protected]>
This file lets a userspace process know the page flags of each of its virtual pages. It contains a 64-bit set of flags for each virtual page, containing data identical to that emitted by
/proc/kpageflags. This allows the user-space task can learn the kpageflags for the pages backing its address-space by consulting one file, without needing to be root.Quoted 4 lines
Example use case is a performance sensitive user-space process querying the hugepage backing of its own memory without the root access required to access
/proc/kpageflags, and without accessing/proc/self/smaps_rollupwhich can be slow and needs to holdmmap_lock.
Quoted 5 lines
Can you elaborate on
a) The target use case. Are you primarily interested to see if a page given base page is head or tail?
Not quite. Generally some userspace process (most notably our network service) has a region of performance critical memory and would like to know if this memory is backed by hugepages or not. It uses /proc/self/pageflags to inspect the pageflags of the pages backing this region, and counts how many ranges are backed by hugepages and how many are not. Generally we export this data to metrics, and if the hugepage backing drops or is insufficient we look into the issue postmortem.
Quoted 3 lines
b) Your
mmap_lockcomment.pagemap_read()needs to hold the mmap lock in read mode while walking process page tables viawalk_page_range().
Gah, I'm _very_ sorry for the misinformation. I was (very incorrectly) under the impression that /proc/self/smaps_rollup required holding the mmap lock but /proc/self/pageflags didn't. I'll remove the comment about the mmap lock from the commit message in V2.
Quoted 2 lines
Also, do you have a rough performance comparison?
So from my tests with simple processes querying smaps/pageflags I don't see any performance difference, but I suspect it's due to my test cases not mapping much memory or regions.
I've CC'd Nathan who works on our network service and has run into performance issues with smaps. Nathan, do you have a rough performance comparison? If so please do share.
Quoted 11 lines
Quoted 4 lines
Similar to
/proc/kpageflags, the flags printed out by the kernel for each page are provided bystable_page_flags(), which exports flag bits that are user visible and stable over time.It exports flags (documented for
pageflags_read()) that are not applicable to processes, like OFFLINE. BUDDY, SLAB, PGTABLE ... and can never happen. Some of these kpageflags are not evenpage->flags, they include abstracted types we use for physical memory pages based on other struct page members (OFFLINE, BUDDY, MMAP, PGTABLE, ...). This feels wrong.
Quoted 4 lines
Also, to me it feels like we are exposing too much internal information to the user, essentially making it ABI that user space processes will rely on.
I'm honestly a bit surprised by this comment because AFAIU (sorry if wrong) we are already exporting this information via /proc/kpageflags and therefore it's already somewhat part of an ABI, and the stable_page_flags() output already needs to be stable and backwards compatible due to potential root users being affected by any non-backwards compatible changes. I am yes extending access to this information to non-root users.
Quoted 5 lines
Did you investigate
a) Reducing the flags we expose to a bare minimum necessary for your use case (and actually applicable to mmaped pages).
To be honest I haven't, but this is something that's certainly doable. I'm not sure it's easier for processes to understand or the kernel to maintain. My thinking:
1. Processes parsing /proc/kpageflags can also easily parse /proc/self/pageflags and re-use code/implementations between them.
2. Userspace code can extract the flags they need and ignore the ones they don't need or are not applicable.
3. For kernel it's maybe easier to maintain 1 set of stable_page_flags() and keep that list backwards compatible. To address your comment I'd need to create a subset, stable_ps_page_flags(), and both lists now need to be backwards compatible.
But I hear you, and if you feel strongly about this I'm more than happy to oblige. Please confirm if this is something you would like to see in V2.
Quoted 2 lines
b) Extending pagemap output instead.
No I have not until you mentioned it, but even now AFAIU (and again sorry if wrong, please correct) all the bits exposed by pagemap as documented in pagemap.rst are in use, and it's a non-starter for me to modify how pagemap works because it'd break backwards compatibility. But if you see a way I'm happy to oblige :-)
Thanks for your review!
Quoted 9 lines
You seem to be interested in the "hugepage backing", which smells like "what is mapped" as in "pagemap".
--
Thanks,David / dhildenb
Quoted 22 lines · Mina Almasry
Quoted 15 lines · David Hildenbrand
Quoted 8 lines · Mina Almasry
From: Yu Zhao <[email protected]>
This file lets a userspace process know the page flags of each of its virtual pages. It contains a 64-bit set of flags for each virtual page, containing data identical to that emitted by
/proc/kpageflags. This allows the user-space task can learn the kpageflags for the pages backing its address-space by consulting one file, without needing to be root.Quoted 4 lines
Example use case is a performance sensitive user-space process querying the hugepage backing of its own memory without the root access required to access
/proc/kpageflags, and without accessing/proc/self/smaps_rollupwhich can be slow and needs to holdmmap_lock.Quoted 5 lines
Can you elaborate on
a) The target use case. Are you primarily interested to see if a page given base page is head or tail?
Quoted 8 lines
Not quite. Generally some userspace process (most notably our network service) has a region of performance critical memory and would like to know if this memory is backed by hugepages or not. It uses
/proc/self/pageflagsto inspect the pageflags of the pages backing this region, and counts how many ranges are backed by hugepages and how many are not. Generally we export this data to metrics, and if the hugepage backing drops or is insufficient we look into the issue postmortem.
Okay, so it's all about detecting if/where THPs are mapped. I assume knowing just the number of THPs getting used by that process is not sufficient for your use case? If you just need numbers, it might be better to let the kernel do the counting :)
[...]
Quoted 11 lines
Quoted 2 lines
Also, do you have a rough performance comparison?
So from my tests with simple processes querying smaps/pageflags I don't see any performance difference, but I suspect it's due to my test cases not mapping much memory or regions.
I've CC'd Nathan who works on our network service and has run into performance issues with smaps. Nathan, do you have a rough performance comparison? If so please do share.
That would be great, because we tend to not add interfaces if the information can already be obtained differently and there is no clear benefit. Performance comparisons can help.
Quoted 16 lines
Quoted 11 lines
Quoted 4 lines
Similar to
/proc/kpageflags, the flags printed out by the kernel for each page are provided bystable_page_flags(), which exports flag bits that are user visible and stable over time.It exports flags (documented for
pageflags_read()) that are not applicable to processes, like OFFLINE. BUDDY, SLAB, PGTABLE ... and can never happen. Some of these kpageflags are not evenpage->flags, they include abstracted types we use for physical memory pages based on other struct page members (OFFLINE, BUDDY, MMAP, PGTABLE, ...). This feels wrong.Quoted 4 lines
Also, to me it feels like we are exposing too much internal information to the user, essentially making it ABI that user space processes will rely on.
Quoted 7 lines
I'm honestly a bit surprised by this comment because AFAIU (sorry if wrong) we are already exporting this information via
/proc/kpageflagsand therefore it's already somewhat part of an ABI, and thestable_page_flags()output already needs to be stable and backwards compatible due to potential root users being affected by any non-backwards compatible changes. I am yes extending access to this information to non-root users.
Sure, a (root) application could access these flags via /proc/kpageflags -- in my thinking usually for debugging purposes, like how I've been using it a couple of times.
Because for something in process context it's barely usable: once you have the PFN via the pagemap for a virtual address and you would want to read the flags of that PFN via kpageflags, the PFN might already have changed for the virtual address and you'd be reading wrong data. It's racy.
I might be wrong, maybe there are some system services making use of that information for some kind of optimizations. A quick google search didn't reveal anything, but maybe I just gave up too early :)
Exposing this information to non-root users would most certainly let some random libraries use this information for real and depend on it, for whatever purpose. If that makes sense.
Quoted 7 lines
Quoted 6 lines
Did you investigate
a) Reducing the flags we expose to a bare minimum necessary for your use case (and actually applicable to mmaped pages).
Quoted 12 lines
To be honest I haven't, but this is something that's certainly doable. I'm not sure it's easier for processes to understand or the kernel to maintain. My thinking:
1. Processes parsing/proc/kpageflagscan also easily parse/proc/self/pageflagsand re-use code/implementations between them.
2. Userspace code can extract the flags they need and ignore the ones they don't need or are not applicable.
3. For kernel it's maybe easier to maintain 1 set ofstable_page_flags()and keep that list backwards compatible. To address your comment I'd need to create a subset,stable_ps_page_flags(), and both lists now need to be backwards compatible.
I'd love to hear other opinions, because maybe I'm just being paranoid. :)
Quoted 5 lines
But I hear you, and if you feel strongly about this I'm more than happy to oblige. Please confirm if this is something you would like to see in V2.
Quoted 9 lines
Quoted 2 lines
b) Extending pagemap output instead.
No I have not until you mentioned it, but even now AFAIU (and again sorry if wrong, please correct) all the bits exposed by pagemap as documented in
pagemap.rstare in use, and it's a non-starter for me to modify how pagemap works because it'd break backwards compatibility. But if you see a way I'm happy to oblige :-)
Bit 58-60 are still free, no? Bit 57 was recently added for uffd-wp purposes I think.
#define PM_SOFT_DIRTY BIT_ULL(55)
#define PM_MMAP_EXCLUSIVE BIT_ULL(56)
#define PM_UFFD_WP BIT_ULL(57)
#define PM_FILE BIT_ULL(61)
#define PM_SWAP BIT_ULL(62)
#define PM_PRESENT BIT_ULL(63)
PM_MMAP_EXCLUSIVE and PM_FILE already go into the direction of "what is mapped" IMHO. So just a thought if something in there (PM_HUGE? PM_THP?) ... could make sense.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 33 lines · David Hildenbrand
Quoted 22 lines · Mina Almasry
Quoted 15 lines · David Hildenbrand
Quoted 8 lines · Mina Almasry
From: Yu Zhao <[email protected]>
This file lets a userspace process know the page flags of each of its virtual pages. It contains a 64-bit set of flags for each virtual page, containing data identical to that emitted by
/proc/kpageflags. This allows the user-space task can learn the kpageflags for the pages backing its address-space by consulting one file, without needing to be root.Quoted 4 lines
Example use case is a performance sensitive user-space process querying the hugepage backing of its own memory without the root access required to access
/proc/kpageflags, and without accessing/proc/self/smaps_rollupwhich can be slow and needs to holdmmap_lock.Quoted 5 lines
Can you elaborate on
a) The target use case. Are you primarily interested to see if a page given base page is head or tail?
Quoted 8 lines
Not quite. Generally some userspace process (most notably our network service) has a region of performance critical memory and would like to know if this memory is backed by hugepages or not. It uses
/proc/self/pageflagsto inspect the pageflags of the pages backing this region, and counts how many ranges are backed by hugepages and how many are not. Generally we export this data to metrics, and if the hugepage backing drops or is insufficient we look into the issue postmortem.
Quoted 7 lines
Okay, so it's all about detecting if/where THPs are mapped. I assume knowing just the number of THPs getting used by that process is not sufficient for your use case? If you just need numbers, it might be better to let the kernel do the counting :)
[...]
Not quite sufficient, no. The process may have lots of non performance critical memory. The network service cares about specific memory ranges and wants to know if those are backed by hugepages.
Quoted 49 lines
Quoted 11 lines
Quoted 2 lines
Also, do you have a rough performance comparison?
So from my tests with simple processes querying smaps/pageflags I don't see any performance difference, but I suspect it's due to my test cases not mapping much memory or regions.
I've CC'd Nathan who works on our network service and has run into performance issues with smaps. Nathan, do you have a rough performance comparison? If so please do share.
That would be great, because we tend to not add interfaces if the information can already be obtained differently and there is no clear benefit. Performance comparisons can help.
Quoted 16 lines
Quoted 11 lines
Quoted 4 lines
Similar to
/proc/kpageflags, the flags printed out by the kernel for each page are provided bystable_page_flags(), which exports flag bits that are user visible and stable over time.It exports flags (documented for
pageflags_read()) that are not applicable to processes, like OFFLINE. BUDDY, SLAB, PGTABLE ... and can never happen. Some of these kpageflags are not evenpage->flags, they include abstracted types we use for physical memory pages based on other struct page members (OFFLINE, BUDDY, MMAP, PGTABLE, ...). This feels wrong.Quoted 4 lines
Also, to me it feels like we are exposing too much internal information to the user, essentially making it ABI that user space processes will rely on.
Quoted 7 lines
I'm honestly a bit surprised by this comment because AFAIU (sorry if wrong) we are already exporting this information via
/proc/kpageflagsand therefore it's already somewhat part of an ABI, and thestable_page_flags()output already needs to be stable and backwards compatible due to potential root users being affected by any non-backwards compatible changes. I am yes extending access to this information to non-root users.Sure, a (root) application could access these flags via
/proc/kpageflags-- in my thinking usually for debugging purposes, like how I've been using it a couple of times.Because for something in process context it's barely usable: once you have the PFN via the pagemap for a virtual address and you would want to read the flags of that PFN via kpageflags, the PFN might already have changed for the virtual address and you'd be reading wrong data. It's racy.
Quoted 8 lines
I might be wrong, maybe there are some system services making use of that information for some kind of optimizations. A quick google search didn't reveal anything, but maybe I just gave up too early :)
Exposing this information to non-root users would most certainly let some random libraries use this information for real and depend on it, for whatever purpose. If that makes sense.
Ah, now I understand. Your concerns here make perfect sense. To be honest I still wonder if stable_page_flags() are exposed to the userspace 'enough' that they have to remain backwards compatible anyway, but I can see that not being really true. Adding /proc/pid/pageflags definitely sets them in stone.
Quoted 47 lines
Quoted 7 lines
Quoted 6 lines
Did you investigate
a) Reducing the flags we expose to a bare minimum necessary for your use case (and actually applicable to mmaped pages).
Quoted 12 lines
To be honest I haven't, but this is something that's certainly doable. I'm not sure it's easier for processes to understand or the kernel to maintain. My thinking:
1. Processes parsing/proc/kpageflagscan also easily parse/proc/self/pageflagsand re-use code/implementations between them.
2. Userspace code can extract the flags they need and ignore the ones they don't need or are not applicable.
3. For kernel it's maybe easier to maintain 1 set ofstable_page_flags()and keep that list backwards compatible. To address your comment I'd need to create a subset,stable_ps_page_flags(), and both lists now need to be backwards compatible.I'd love to hear other opinions, because maybe I'm just being paranoid. :)
Quoted 5 lines
But I hear you, and if you feel strongly about this I'm more than happy to oblige. Please confirm if this is something you would like to see in V2.
Quoted 9 lines
Quoted 2 lines
b) Extending pagemap output instead.
No I have not until you mentioned it, but even now AFAIU (and again sorry if wrong, please correct) all the bits exposed by pagemap as documented in
pagemap.rstare in use, and it's a non-starter for me to modify how pagemap works because it'd break backwards compatibility. But if you see a way I'm happy to oblige :-)Bit 58-60 are still free, no? Bit 57 was recently added for uffd-wp purposes I think.
#define PM_SOFT_DIRTY BIT_ULL(55) #define PM_MMAP_EXCLUSIVE BIT_ULL(56) #define PM_UFFD_WP BIT_ULL(57) #define PM_FILE BIT_ULL(61) #define PM_SWAP BIT_ULL(62) #define PM_PRESENT BIT_ULL(63)
Quoted 4 lines
PM_MMAP_EXCLUSIVEandPM_FILEalready go into the direction of "what is mapped" IMHO. So just a thought if something in there (PM_HUGE?PM_THP?) ... could make sense.
Thanks! I _think_ that would work for us, I'll look into confirming. To be honest I still wonder if eventually different folks will find uses for other page flags and eventually we'll run out of pagemaps bits, but I'll yield to whatever you think is best here.
Quoted 5 lines
--
Thanks,David / dhildenb
Quoted 3 lines · Mina Almasry
Not quite sufficient, no. The process may have lots of non performance critical memory. The network service cares about specific memory ranges and wants to know if those are backed by hugepages.
Would it make sense to extend mincore() instead? We have 7 remaining bits per byte.
But my question is, what information do you really want? Do you want to know if the memory range is backed by huge pages, or do you want to know if PMDs are being used to map the backing memory?
What information would you want to see if, say, 64kB entries are being used on a 4kB ARM system where there's hardware support for those. Other architectures also have support for TLB entries that are intermediate between PTE and PMD sizes.
Quoted 15 lines
Quoted 10 lines
Bit 58-60 are still free, no? Bit 57 was recently added for uffd-wp purposes I think.
#define PM_SOFT_DIRTY BIT_ULL(55) #define PM_MMAP_EXCLUSIVE BIT_ULL(56) #define PM_UFFD_WP BIT_ULL(57) #define PM_FILE BIT_ULL(61) #define PM_SWAP BIT_ULL(62) #define PM_PRESENT BIT_ULL(63)Quoted 4 lines
PM_MMAP_EXCLUSIVEandPM_FILEalready go into the direction of "what is mapped" IMHO. So just a thought if something in there (PM_HUGE?PM_THP?) ... could make sense.
Quoted 4 lines
Thanks! I _think_ that would work for us, I'll look into confirming. To be honest I still wonder if eventually different folks will find uses for other page flags and eventually we'll run out of pagemaps bits, but I'll yield to whatever you think is best here.
Using one of the remaining 3 bits should be fine. In the worst case, we'll need pagemap_ext at some point that provides more bits per PFN, if we ever run out of bits.
But as mentioned by Matthew, extending mincore() could also work: not only indicating if the page is resident, but also in which "form" it is resident.
We could separate the cases "cont PTE huge page" vs. "PMD huge page".
I recall that the information (THP / !THP) might be valuable for users:
there was a discussion to let user space decide where to place THP. (IIRC madvise() extension to have something like MADV_COLLAPSE_THP / MADV_DISSOLVE_THP)
Signature · 3 lines
Thanks, David / dhildenb
Quoted 16 lines · David Hildenbrand
Quoted 16 lines
Quoted 15 lines
Bit 58-60 are still free, no? Bit 57 was recently added for uffd-wp purposes I think.
#define PM_SOFT_DIRTY BIT_ULL(55) #define PM_MMAP_EXCLUSIVE BIT_ULL(56) #define PM_UFFD_WP BIT_ULL(57) #define PM_FILE BIT_ULL(61) #define PM_SWAP BIT_ULL(62) #define PM_PRESENT BIT_ULL(63)
PM_MMAP_EXCLUSIVEandPM_FILEalready go into the direction of "what is mapped" IMHO. So just a thought if something in there (PM_HUGE?PM_THP?) ... could make sense.
Quoted 9 lines
Quoted 4 lines
Thanks! I _think_ that would work for us, I'll look into confirming. To be honest I still wonder if eventually different folks will find uses for other page flags and eventually we'll run out of pagemaps bits, but I'll yield to whatever you think is best here.
Using one of the remaining 3 bits should be fine. In the worst case, we'll need
pagemap_extat some point that provides more bits per PFN, if we ever run out of bits.
That sounds great to me. Thank you Both Matthew and David for patiently explaining the concerns with /proc/self/pageflags to me and suggesting alternatives that could work :-)
Quoted 4 lines
But as mentioned by Matthew, extending
mincore()could also work: not only indicating if the page is resident, but also in which "form" it is resident.
I need to learn more about mincore() to be honest, from casually reading some docs I didn't get a full understanding on if/why that would work better. I'll do some investigating and upload V2 either with /proc/self/pagemaps or mincore() and why I chose such and we can go from there.
Quoted 2 lines
We could separate the cases "cont PTE huge page" vs. "PMD huge page".
So to be completely honest (and I need to confirm), we are using this on x86 and we essentially care that the virt address is mapped by 2MB, so mapped by PMD. I think (but need to confirm) that's what the pageflags HUGE bit refers to as well as does PageHuge() and TransPageHuge(). After confirming I'll upload V2 with the precise info we need (I think it's going to be "PMD huge page" as David says).
Quoted 10 lines
I recall that the information (THP / !THP) might be valuable for users:
there was a discussion to let user space decide where to place THP. (IIRCmadvise()extension to have something likeMADV_COLLAPSE_THP/MADV_DISSOLVE_THP)--
Thanks,David / dhildenb