improve late microcode loading
v10 cover improve late microcode loading
Major changes in version 10:
- add back the patch to call wbinvd() conditionally
- add a patch to disable late loading due to BDF90
- rendezvous CPUs in NMI handler and load ucode. But provide an option to disable this behavior.
- avoid the call of self_nmi() on the control thread because it may trigger the unknown_nmi_error() in do_nmi().
- ensure ->start_update is called during system resuming from suspension
Sergey, could you help to test this series on an AMD machine? Regarding changes to AMD side, I didn't do any test for them due to lack of hardware. At least, two basic tests are needed:
* do a microcode update after system bootup
* don't bring all pCPUs up at bootup by specifying maxcpus option in xen command line and then do a microcode update and online all offlined CPUs via 'xen-hptool'.
The intention of this series is to make the late microcode loading more reliable by rendezvousing all cpus in stop_machine context. This idea comes from Ashok. I am porting his linux patch to Xen (see patch 12 more details).
This series includes below changes:
1. Patch 1-11: introduce a global microcode cache and some cleanup
2. Patch 12: synchronize late microcode loading
3. Patch 13: support parallel microcodes update on different cores
4. Patch 14: block #NMI handling during microcode loading
5. Patch 15: disable late ucode loading due to BDF90
6. Patch 16: call wbinvd() conditionally
Currently, late microcode loading does a lot of things including parsing microcode blob, checking the signature/revision and performing update. Putting all of them into stop_machine context is a bad idea because of complexity (one issue I observed is memory allocation triggered one assertion in stop_machine context). To simplify the load process, parsing microcode is moved out of the load process. Remaining parts of load process is put to stop_machine context.
Previous change log:
Changes in version 9:
- add Jan's Reviewed-by
- rendevzous threads in NMI handler to disable NMI. Note that NMI can be served as usual on threads that are chosen to initiate ucode loading on each core.
- avoid unnecessary memory allocation or copy when creating a microcode patch (patch 12)
- rework patch 1 to avoid microcode_update_match() being used to compare two arbitrary updates.
- call .end_update in early loading path.
Changes in version 8:
- block #NMI handling during microcode loading (Patch 16)
- Don't assume that all CPUs in the system have loaded a same ucode. So when parsing a blob, we attempt to save a patch as long as it matches with current cpu signature regardless of the revision of the patch. And also for loading, we only require the patch to be loaded isn't old than the cached one.
- store an update after the first successful loading on a CPU
- remove the patch that calls wbinvd() unconditionally before microcode loading. It is under internal discussion.
- divide two big patches into several patches to improve readability.
Changes in version 7:
- cache one microcode update rather than a list of it. Assuming that all CPUs (including those will be plugged in later) in the system have the same signature, one update matches with one CPU should match with others. Thus, one update is enough for microcode updating during CPU hot-plug and resuming.
- To handle load failure, microcode update is cached after it is applied to avoid a broken update overriding a validated one. Unvalidated microcode updates are passed by arguments rather than another global variable, where this series slightly differs from Roger's suggestion in:
https://lists.xen.org/archives/html/xen-devel/2019-03/msg00776.html
- incorporate Sergey's patch (patch 10) to fix a bug: we maintain a variable to reflect current microcode revision. But in some cases, this variable isn't initialized during system boot time, which results in falsely reporting that processor is susceptible to some known vulnerabilities.
- fix issues reported by Sergey:
https://lists.xenproject.org/archives/html/xen-devel/2019-03/msg00901.html
- Responses to Sergey/Roger/Wei/Ashok's other comments.
Major changes in version 6:
- run wbinvd before updating microcode (patch 10)
- add an userspace tool for late microcode update (patch 1)
- scale time to wait by the number of remaining CPUs to respond
- remove 'cpu' parameters from some related callbacks and functins
- save an ucode patch only if its supported CPU is allowed to mix with current cpu.
Changes in version 5:
- support parallel microcode updates for all cores (see patch 8)
- Address Roger's comments on the last version.
Chao Gao (16):
microcode/intel: extend microcode_update_match() microcode/amd: distinguish old and mismatched ucode in
microcode_fits()
microcode: introduce a global cache of ucode patch
microcode: clean up microcode_resume_cpu
microcode: remove struct ucode_cpu_info
microcode: remove pointless 'cpu' parameter microcode/amd: call svm_host_osvw_init() in common code
microcode: pass a patch pointer to apply_microcode()
microcode: split out apply_microcode() from cpu_request_microcode()
microcode: unify ucode loading during system bootup and resuming
microcode: reduce memory allocation and copy when creating a patch x86/microcode: Synchronize late microcode loading
microcode: remove microcode_update_lock
microcode: rendezvous CPUs in NMI handler and load ucode
microcode: disable late loading if CPUs are affected by BDF90 microcode/intel: writeback and invalidate cache conditionally
docs/misc/xen-command-line.pandoc | 10 + xen/arch/x86/acpi/power.c | 2 +- xen/arch/x86/apic.c | 2 +- xen/arch/x86/microcode.c | 569 ++++++++++++++++++++++++++++++-------- xen/arch/x86/microcode_amd.c | 282 +++++++++---------- xen/arch/x86/microcode_intel.c | 269 +++++++++++------- xen/arch/x86/smpboot.c | 5 +- xen/arch/x86/spec_ctrl.c | 2 +- xen/arch/x86/traps.c | 6 +- xen/include/asm-x86/microcode.h | 43 +-- xen/include/asm-x86/nmi.h | 3 + xen/include/asm-x86/processor.h | 4 +- 12 files changed, 788 insertions(+), 409 deletions(-)
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 1/16 microcode/intel: extend microcode_update_match()
to a more generic function. So that it can be used alone to check an update against the CPU signature and current update revision.
Note that enum microcode_match_result will be used in common code (aka microcode.c), it has been placed in the common header. And constifying the parameter of microcode_sanity_check() such that it can be called by microcode_update_match().
---
Changes in v10:
- Drop RBs
- assert that microcode passed to microcode_update_match() would pass sanity check. Constify the parameter of microcode_sanity_check()
Changes in v9:
- microcode_update_match() doesn't accept (sig, pf, rev) any longer. Hence, it won't be used to compare two arbitrary updates.
- rewrite patch description
Changes in v8:
- make sure enough room for an extended header and signature array
Changes in v6:
- eliminate unnecessary type casting in microcode_update_match
- check if a patch has an extend header
Changes in v5:
- constify the extended_signature
- use named enum type for the return value of microcode_update_match
--- xen/arch/x86/microcode_intel.c | 75 ++++++++++++++++++++++------------------- xen/include/asm-x86/microcode.h | 6 ++++ 2 files changed, 47 insertions(+), 34 deletions(-)
xen/arch/x86/microcode_intel.c +41 -34
@@ -134,21 +134,11 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static int microcode_sanity_check (const void *mc) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); - -return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); -} - -static int microcode_sanity_check (void *mc) -{ -struct microcode_header_intel *mc_header = mc; -struct extended_sigtable *ext_header =NULL ; -struct extended_signature *ext_sig; +const struct microcode_header_intel *mc_header = mc; +const struct extended_sigtable *ext_header =NULL ; +const struct extended_signature *ext_sig;unsigned long total_size, data_size, ext_table_size;unsigned int ext_sigcount =0 , i;uint32_t sum, orig_sum;
@@ -234,6 +224,42 @@ static int microcode_sanity_check(void *mc)return 0 ; } +/* Check an update against the CPU signature and current update revision */ +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int cpu) +{ +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned int i; +struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); +unsigned int sig = uci->cpu_sig.sig; +unsigned int pf = uci->cpu_sig.pf; +unsigned int rev = uci->cpu_sig.rev; +unsigned long data_size =get_datasize (mc_header); +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +ASSERT (!microcode_sanity_check (mc_header)); +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ; + + ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* +* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ; + +for ( i =0 ; i < ext_header->count; i++ ) +if (sigmatch (sig, ext_sig[i].sig, pf, ext_sig[i].pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ; + +return MIS_UCODE ; +} +/* * return 0 - no update found * return 1 - found update
@@ -243,31 +269,12 @@ static int get_matching_microcode(const void *mc, unsigned int cpu) {struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);const struct microcode_header_intel *mc_header = mc; -const struct extended_sigtable *ext_header;unsigned long total_size =get_totalsize (mc_header); -int ext_sigcount, i; -struct extended_signature *ext_sig;void *new_mc; -if (microcode_update_match (cpu, mc_header, - mc_header->sig, mc_header->pf) ) - goto find; - -if ( total_size <= (get_datasize (mc_header) +MC_HEADER_SIZE ) ) +if (microcode_update_match (mc, cpu) !=NEW_UCODE )return 0 ; - ext_header = mc +get_datasize (mc_header) +MC_HEADER_SIZE ; - ext_sigcount = ext_header->count; - ext_sig = (void *)ext_header +EXT_HEADER_SIZE ; -for ( i =0 ; i < ext_sigcount; i++ ) - { -if (microcode_update_match (cpu, mc_header, - ext_sig->sig, ext_sig->pf) ) - goto find; - ext_sig++; - } -return 0 ; - find:pr_debug ("microcode: CPU%d found a matching microcode update with" " version %#x (current=%#x)\n" , cpu, mc_header->rev, uci->cpu_sig.rev);
xen/include/asm-x86/microcode.h +6 -0
@@ -3,6 +3,12 @@#include <xen/percpu.h> +enum microcode_match_result { +OLD_UCODE ,/* signature matched, but revision id is older or equal */ +NEW_UCODE ,/* signature matched, but revision id is newer */ +MIS_UCODE ,/* signature mismatched */ +}; +struct cpu_signature ;struct ucode_cpu_info ;
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 01/16] microcode/intel: extend microcode_update_match()
Quoted 50 lines · Chao Gao
xen/arch/x86/microcode_intel.c +22
-14@@ -134,21 +134,11 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static int microcode_sanity_check (const void *mc) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); - -return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); -} - -static int microcode_sanity_check (void *mc) -{ -struct microcode_header_intel *mc_header = mc; -struct extended_sigtable *ext_header =NULL ; -struct extended_signature *ext_sig; +const struct microcode_header_intel *mc_header = mc; +const struct extended_sigtable *ext_header =NULL ; +const struct extended_signature *ext_sig;unsigned long total_size, data_size, ext_table_size;unsigned int ext_sigcount =0 , i;uint32_t sum, orig_sum;@@ -234,6 +224,42 @@ static int microcode_sanity_check(void *mc)return 0 ; } +/* Check an update against the CPU signature and current update revision */ +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int cpu) +{ +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned int i; +struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); +unsigned int sig = uci->cpu_sig.sig; +unsigned int pf = uci->cpu_sig.pf; +unsigned int rev = uci->cpu_sig.rev; +unsigned long data_size =get_datasize (mc_header); +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +ASSERT (!microcode_sanity_check (mc_header)); +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ; +
xen/arch/x86/microcode_intel.c static int microcode_sanity_check(void *mc) · line 254
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* +* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ;
With you now assuming that the blob has previously passed microcode_sanity_check(), this only needs to be
if ( (end <= (const void *)ext_sig) )
return MIS_UCODE;now afaict.
preferably with this adjustment (assuming you agree).
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 01/16] microcode/intel: extend microcode_update_match()
Quoted 65 lines · Jan Beulich
Quoted 50 lines · Chao Gao
xen/arch/x86/microcode_intel.c +22
-14@@ -134,21 +134,11 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static int microcode_sanity_check (const void *mc) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); - -return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); -} - -static int microcode_sanity_check (void *mc) -{ -struct microcode_header_intel *mc_header = mc; -struct extended_sigtable *ext_header =NULL ; -struct extended_signature *ext_sig; +const struct microcode_header_intel *mc_header = mc; +const struct extended_sigtable *ext_header =NULL ; +const struct extended_signature *ext_sig;unsigned long total_size, data_size, ext_table_size;unsigned int ext_sigcount =0 , i;uint32_t sum, orig_sum;@@ -234,6 +224,42 @@ static int microcode_sanity_check(void *mc)return 0 ; } +/* Check an update against the CPU signature and current update revision */ +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int cpu) +{ +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned int i; +struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); +unsigned int sig = uci->cpu_sig.sig; +unsigned int pf = uci->cpu_sig.pf; +unsigned int rev = uci->cpu_sig.rev; +unsigned long data_size =get_datasize (mc_header); +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +ASSERT (!microcode_sanity_check (mc_header)); +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ; +xen/arch/x86/microcode_intel.c static int microcode_sanity_check(void *mc) · line 254
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* +* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ;With you now assuming that the blob has previously passed
microcode_sanity_check(), this only needs to be
Quoted 7 lines
if ( (end <= (const void *)ext_sig) ) return MIS_UCODE;now afaict.
Reviewed-by Jan Beulich <[email protected]>preferably with this adjustment (assuming you agree).
FAOD: I'd be happy to make the adjustment while committing, but I'd like to have your consent (or you proving me wrong). This would, as it looks, allow everything up to patch 8 to go in.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 01/16] microcode/intel: extend microcode_update_match()
Quoted 69 lines · Jan Beulich
Quoted 68 lines · Jan Beulich
Quoted 50 lines · Chao Gao
xen/arch/x86/microcode_intel.c +22
-14@@ -134,21 +134,11 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static int microcode_sanity_check (const void *mc) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); - -return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); -} - -static int microcode_sanity_check (void *mc) -{ -struct microcode_header_intel *mc_header = mc; -struct extended_sigtable *ext_header =NULL ; -struct extended_signature *ext_sig; +const struct microcode_header_intel *mc_header = mc; +const struct extended_sigtable *ext_header =NULL ; +const struct extended_signature *ext_sig;unsigned long total_size, data_size, ext_table_size;unsigned int ext_sigcount =0 , i;uint32_t sum, orig_sum;@@ -234,6 +224,42 @@ static int microcode_sanity_check(void *mc)return 0 ; } +/* Check an update against the CPU signature and current update revision */ +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int cpu) +{ +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned int i; +struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); +unsigned int sig = uci->cpu_sig.sig; +unsigned int pf = uci->cpu_sig.pf; +unsigned int rev = uci->cpu_sig.rev; +unsigned long data_size =get_datasize (mc_header); +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +ASSERT (!microcode_sanity_check (mc_header)); +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ; +xen/arch/x86/microcode_intel.c static int microcode_sanity_check(void *mc) · line 254
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* +* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ;With you now assuming that the blob has previously passed
microcode_sanity_check(), this only needs to beif ( (end <= (const void *)ext_sig) ) return MIS_UCODE;
Quoted 8 lines
Quoted 4 lines
now afaict.
Reviewed-by Jan Beulich <[email protected]>preferably with this adjustment (assuming you agree).
FAOD: I'd be happy to make the adjustment while committing, but I'd like to have your consent (or you proving me wrong). This would, as it looks, allow everything up to patch 8 to go in.
Please go ahead. Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 2/16 microcode/amd: distinguish old and mismatched ucode in microcode_fits()
In reply to Chao GaoSometimes, an ucode with a level lower than or equal to current CPU's patch level is useful. For example, to work around a broken bios which only loads ucode for BSP, when BSP parses an ucode blob during bootup, it is better to save an ucode with lower or equal level for APs
No functional change is made in this patch. But following patch would handle "old ucode" and "mismatched ucode" separately.
---
Changes in v8:
- new
--- xen/arch/x86/microcode_amd.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
xen/arch/x86/microcode_amd.c +9 -9
@@ -152,8 +152,8 @@ static bool_t find_equiv_cpu_id(const struct equiv_cpu_entry *equiv_cpu_table,return 0 ; } -static bool_t microcode_fits (const struct microcode_amd *mc_amd, -unsigned int cpu) +static enum microcode_match_result microcode_fits ( +const struct microcode_amd *mc_amd,unsigned int cpu) {struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);const struct microcode_header_amd *mc_header = mc_amd->mpb;
@@ -167,27 +167,27 @@ static bool_t microcode_fits(const struct microcode_amd *mc_amd, current_cpu_id =cpuid_eax (0x00000001 );if ( !find_equiv_cpu_id (equiv_cpu_table, current_cpu_id, &equiv_cpu_id) ) -return 0 ; +return MIS_UCODE ;if ( (mc_header->processor_rev_id) != equiv_cpu_id ) -return 0 ; +return MIS_UCODE ;if ( !verify_patch_size (mc_amd->mpb_size) ) {pr_debug ("microcode: patch size mismatch\n" ); -return 0 ; +return MIS_UCODE ; }if ( mc_header->patch_id <= uci->cpu_sig.rev ) {pr_debug ("microcode: patch is already at required level or greater.\n" ); -return 0 ; +return OLD_UCODE ; }pr_debug ("microcode: CPU%d found a matching microcode update with version %#x (current=%#x)\n" , cpu, mc_header->patch_id, uci->cpu_sig.rev); -return 1 ; +return NEW_UCODE ; }static int apply_microcode (unsigned int cpu)
@@ -496,7 +496,7 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,while ( (error =get_ucode_from_buffer_amd (mc_amd, buf, bufsize, &offset)) ==0 ) { -if (microcode_fits (mc_amd, cpu) ) +if (microcode_fits (mc_amd, cpu) ==NEW_UCODE ) { error =apply_microcode (cpu);if ( error )
@@ -579,7 +579,7 @@ static int microcode_resume_match(unsigned int cpu, const void *mc)struct microcode_amd *mc_amd = uci->mc.mc_amd;const struct microcode_amd *src = mc; -if ( !microcode_fits (src, cpu) ) +if (microcode_fits (src, cpu) !=NEW_UCODE )return 0 ;if ( src != mc_amd )
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 3/16 microcode: introduce a global cache of ucode patch
In reply to Chao Gaoto replace the current per-cpu cache 'uci->mc'.
With the assumption that all CPUs in the system have the same signature (family, model, stepping and 'pf'), one microcode update matches with one cpu should match with others. Having differing microcode revisions on cpus would cause system unstable and should be avoided. Hence, caching one microcode update is good enough for all cases.
Introduce a global variable, microcode_cache, to store the newest matching microcode update. Whenever we get a new valid microcode update, its revision id is compared against that of the microcode update to determine whether the "microcode_cache" needs to be replaced. And this global cache is loaded to cpu in apply_microcode().
All operations on the cache is protected by 'microcode_mutex'.
Note that I deliberately avoid touching the old per-cpu cache ('uci->mc') as I am going to remove it completely in the following patches. We copy everything to create the new cache blob to avoid reusing some buffers previously allocated for the old per-cpu cache. It is not so efficient, but it is already corrected by a patch later in this series.
---
Changes in v10:
- assert mismatched ucode won't be passed to ->compare_patch.
- return -ENOENT if patch is NULL in .apply_microcode().
- check against NULL pointer dereference in free_patch() on AMD side
- cosmetic changes suggested by Roger and Jan.
Changes in v9:
- on Intel side, ->compare_patch just checks the patch revision number.
- explain why all buffers are copied in alloc_microcode_patch() in patch description.
Changes in v8:
- Free generic wrapper struct in general code
- Try to update cache as long as a patch covers current cpu. Previsouly, cache is updated only if the patch is newer than current update revision in the CPU. The small difference can work around a broken bios which only applies microcode update to BSP and software has to apply the same update to other CPUs.
Changes in v7:
- reworked to cache only one microcode patch rather than a list of microcode patches.
--- xen/arch/x86/microcode.c | 38 ++++++++++++++++ xen/arch/x86/microcode_amd.c | 98 ++++++++++++++++++++++++++++++++++++++--- xen/arch/x86/microcode_intel.c | 81 +++++++++++++++++++++++++++------- xen/include/asm-x86/microcode.h | 16 +++++++ 4 files changed, 211 insertions(+), 22 deletions(-)
xen/arch/x86/microcode.c +38 -0
@@ -61,6 +61,9 @@ static struct ucode_mod_blob __initdata ucode_blob;*/ static bool_t __initdata ucode_scan; +/* Protected by microcode_mutex */ +static struct microcode_patch *microcode_cache; +void __init microcode_set_module (unsigned int idx) { ucode_mod_idx = idx;
@@ -262,6 +265,41 @@ int microcode_resume_cpu(unsigned int cpu)return err; } +void microcode_free_patch (struct microcode_patch *microcode_patch) +{ + microcode_ops->free_patch (microcode_patch->mc); +xfree (microcode_patch); +} + +const struct microcode_patch *microcode_get_cache (void ) +{ +ASSERT (spin_is_locked (µcode_mutex)); + +return microcode_cache; +} + +/* Return true if cache gets updated. Otherwise, return false */ +bool microcode_update_cache (struct microcode_patch *patch) +{ +ASSERT (spin_is_locked (µcode_mutex)); + +if ( !microcode_cache ) + microcode_cache = patch; +else if ( microcode_ops->compare_patch (patch, + microcode_cache) ==NEW_UCODE ) + { +microcode_free_patch (microcode_cache); + microcode_cache = patch; + } +else + { +microcode_free_patch (patch); +return false; + } + +return true; +} +static int microcode_update_cpu (const void *buf,size_t size) {int err;
xen/arch/x86/microcode_amd.c +91 -7
129 lines not on this page · raw message
xen/arch/x86/microcode_intel.c +66 -15
149 lines not on this page · raw message
xen/include/asm-x86/microcode.h +16 -0
@@ -12,6 +12,14 @@ enum microcode_match_result {struct cpu_signature ;struct ucode_cpu_info ; +struct microcode_patch { +union { +struct microcode_intel *mc_intel; +struct microcode_amd *mc_amd; +void *mc; + }; +}; +struct microcode_ops {int (*microcode_resume_match)(unsigned int cpu,const void *mc); int (*cpu_request_microcode)(unsigned int cpu, const void *buf,
@@ -19,6 +27,10 @@ struct microcode_ops {int (*collect_cpu_info)(unsigned int cpu,struct cpu_signature *csig);int (*apply_microcode)(unsigned int cpu);int (*start_update)(void ); +void (*free_patch)(void *mc); +bool (*match_cpu)(const struct microcode_patch *patch); +enum microcode_match_result (*compare_patch)( +const struct microcode_patch *new,const struct microcode_patch *old); };struct cpu_signature {
@@ -39,4 +51,8 @@ struct ucode_cpu_info { DECLARE_PER_CPU(struct ucode_cpu_info, ucode_cpu_info);extern const struct microcode_ops *microcode_ops; +const struct microcode_patch *microcode_get_cache (void ); +bool microcode_update_cache (struct microcode_patch *patch); +void microcode_free_patch (struct microcode_patch *patch); +#endif /* ASM_X86__MICROCODE_H */
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 03/16] microcode: introduce a global cache of ucode patch
Quoted 21 lines · Chao Gao
xen/arch/x86/microcode_intel.c +15
-0@@ -260,6 +260,36 @@ static enum microcode_match_result microcode_update_match(return MIS_UCODE ; } +static bool match_cpu (const struct microcode_patch *patch) +{ +if ( !patch ) +return false; + +return microcode_update_match (&patch->mc_intel->hdr, +smp_processor_id ()) ==NEW_UCODE ; +} + +static void free_patch (void *mc) +{ +xfree (mc); +} + +static enum microcode_match_result compare_patch(
xen/arch/x86/microcode_intel.c static enum microcode_match_result microcode_update_match( · line 287
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+ const struct microcode_patch *new, const struct microcode_patch *old) +{ + /* + * Both patches to compare are supposed to be applicable to local CPU. + * Just compare the revision number. + */ + ASSERT(microcode_update_match(&old->mc_intel->hdr, smp_processor_id()) != + MIS_UCODE); + ASSERT(microcode_update_match(&new->mc_intel->hdr, smp_processor_id()) != + MIS_UCODE);
With the indentation here fixed
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 4/16 microcode: clean up microcode_resume_cpu
In reply to Chao GaoPreviously, a per-cpu ucode cache is maintained. Then each CPU had one per-cpu update cache and there might be multiple versions of microcode. Thus microcode_resume_cpu tried best to update microcode by loading every update cache until a successful load.
But now the cache struct is simplified a lot and only a single ucode is cached. a single invocation of ->apply_microcode() would load the cache and make microcode updated.
---
changes in v8:
- new
- separated from the following patch
--- xen/arch/x86/microcode.c | 40 ++--------------------------------- xen/arch/x86/microcode_amd.c | 47 ----------------------------------------- xen/arch/x86/microcode_intel.c | 6 ------ xen/include/asm-x86/microcode.h | 1 - 4 files changed, 2 insertions(+), 92 deletions(-)
xen/arch/x86/microcode.c +2 -38
@@ -215,8 +215,6 @@ int microcode_resume_cpu(unsigned int cpu) {int err;struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); -struct cpu_signature nsig; -unsigned int cpu2;if ( !microcode_ops )return 0 ;
@@ -224,42 +222,8 @@ int microcode_resume_cpu(unsigned int cpu)spin_lock (µcode_mutex); err = microcode_ops->collect_cpu_info (cpu, &uci->cpu_sig); -if ( err ) - { -__microcode_fini_cpu (cpu); -spin_unlock (µcode_mutex); -return err; - } - -if ( uci->mc.mc_valid ) - { - err = microcode_ops->microcode_resume_match (cpu, uci->mc.mc_valid); -if ( err >=0 ) - { -if ( err ) - err = microcode_ops->apply_microcode (cpu); -spin_unlock (µcode_mutex); -return err; - } - } - - nsig = uci->cpu_sig; -__microcode_fini_cpu (cpu); - uci->cpu_sig = nsig; - - err = -EIO ; -for_each_online_cpu ( cpu2 ) - { - uci = &per_cpu (ucode_cpu_info, cpu2); -if ( uci->mc.mc_valid && - microcode_ops->microcode_resume_match (cpu, uci->mc.mc_valid) >0 ) - { - err = microcode_ops->apply_microcode (cpu); -break ; - } - } - -__microcode_fini_cpu (cpu); +if (likely (!err) ) + err = microcode_ops->apply_microcode (cpu);spin_unlock (µcode_mutex);return err;
xen/arch/x86/microcode_amd.c +0 -47
59 lines not on this page · raw message
xen/arch/x86/microcode_intel.c +0 -6
@@ -455,13 +455,7 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,return error; } -static int microcode_resume_match (unsigned int cpu,const void *mc) -{ -return get_matching_microcode (mc, cpu); -} -static const struct microcode_ops microcode_intel_ops = { - .microcode_resume_match = microcode_resume_match, .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode,
xen/include/asm-x86/microcode.h +0 -1
@@ -21,7 +21,6 @@ struct microcode_patch { };struct microcode_ops { -int (*microcode_resume_match)(unsigned int cpu,const void *mc);int (*cpu_request_microcode)(unsigned int cpu,const void *buf,size_t size);int (*collect_cpu_info)(unsigned int cpu,struct cpu_signature *csig);
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 5/16 microcode: remove struct ucode_cpu_info
In reply to Chao GaoRemove the per-cpu cache field in struct ucode_cpu_info since it has been replaced by a global cache. It would leads to only one field remaining in ucode_cpu_info. Then, this struct is removed and the remaining field (cpu signature) is stored in per-cpu area.
The cpu status notifier is also removed. It was used to free the "mc" field to avoid memory leak.
---
Changes in v9:
- rebase and fix conflict
Changes in v8:
- split microcode_resume_cpu() cleanup to a separate patch.
Changes in v6:
- remove the whole struct ucode_cpu_info instead of the per-cpu cache in it.
--- xen/arch/x86/apic.c | 2 +- xen/arch/x86/microcode.c | 57 +++++++-------------------------------- xen/arch/x86/microcode_amd.c | 59 +++++++++-------------------------------- xen/arch/x86/microcode_intel.c | 28 +++++++------------ xen/arch/x86/spec_ctrl.c | 2 +- xen/include/asm-x86/microcode.h | 12 +-------- 6 files changed, 34 insertions(+), 126 deletions(-)
xen/arch/x86/apic.c +1 -1
@@ -1190,7 +1190,7 @@ static void __init check_deadline_errata(void)else rev = (unsigned long )m->driver_data; -if (this_cpu (ucode_cpu_info).cpu_sig.rev >= rev ) +if (this_cpu (cpu_sig).rev >= rev )return ;setup_clear_cpu_cap (X86_FEATURE_TSC_DEADLINE );
xen/arch/x86/microcode.c +9 -48
119 lines not on this page · raw message
xen/arch/x86/microcode_amd.c +13 -46
143 lines not on this page · raw message
xen/arch/x86/microcode_intel.c +9 -19
@@ -231,10 +231,10 @@ static enum microcode_match_result microcode_update_match(const struct extended_sigtable *ext_header;const struct extended_signature *ext_sig;unsigned int i; -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); -unsigned int sig = uci->cpu_sig.sig; -unsigned int pf = uci->cpu_sig.pf; -unsigned int rev = uci->cpu_sig.rev; +struct cpu_signature *cpu_sig = &per_cpu (cpu_sig, cpu); +unsigned int sig = cpu_sig->sig; +unsigned int pf = cpu_sig->pf; +unsigned int rev = cpu_sig->rev;unsigned long data_size =get_datasize (mc_header);const void *end = (const void *)mc_header +get_totalsize (mc_header);
@@ -297,7 +297,6 @@ static enum microcode_match_result compare_patch(*/ static int get_matching_microcode (const void *mc,unsigned int cpu) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);const struct microcode_header_intel *mc_header = mc;unsigned long total_size =get_totalsize (mc_header);void *new_mc =xmalloc_bytes (total_size);
@@ -323,17 +322,8 @@ static int get_matching_microcode(const void *mc, unsigned int cpu)pr_debug ("microcode: CPU%d found a matching microcode update with" " version %#x (current=%#x)\n" , - cpu, mc_header->rev, uci->cpu_sig.rev); - new_mc =xmalloc_bytes (total_size); -if ( new_mc ==NULL ) - { -printk (KERN_ERR "microcode: error! Can not allocate memory\n" ); -return -ENOMEM ; - } + cpu, mc_header->rev,per_cpu (cpu_sig, cpu).rev); -memcpy (new_mc, mc, total_size); -xfree (uci->mc.mc_intel); - uci->mc.mc_intel = new_mc;return 1 ; }
@@ -343,7 +333,7 @@ static int apply_microcode(unsigned int cpu)uint64_t msr_content;unsigned int val[2 ];unsigned int cpu_num =raw_smp_processor_id (); -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); +struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_intel *mc_intel;const struct microcode_patch *patch =microcode_get_cache ();
@@ -377,14 +367,14 @@ static int apply_microcode(unsigned int cpu) {printk (KERN_ERR "microcode: CPU%d update from revision " "%#x to %#x failed. Resulting revision is %#x.\n" , cpu_num, - uci->cpu_sig.rev, mc_intel->hdr.rev, val[1 ]); + sig->rev, mc_intel->hdr.rev, val[1 ]);return -EIO ; }printk (KERN_INFO "microcode: CPU%d updated from revision " "%#x to %#x, date = %04x-%02x-%02x \n" , - cpu_num, uci->cpu_sig.rev, val[1 ], mc_intel->hdr.year, + cpu_num, sig->rev, val[1 ], mc_intel->hdr.year, mc_intel->hdr.month, mc_intel->hdr.day); - uci->cpu_sig.rev = val[1 ]; + sig->rev = val[1 ];return 0 ; }
xen/arch/x86/spec_ctrl.c +1 -1
@@ -438,7 +438,7 @@ static bool __init check_smt_enabled(void)/* Calculate whether Retpoline is known-safe on this CPU. */ static bool __init retpoline_safe (uint64_t caps) { -unsigned int ucode_rev =this_cpu (ucode_cpu_info).cpu_sig.rev; +unsigned int ucode_rev =this_cpu (cpu_sig).rev;if ( boot_cpu_data.x86_vendor & (X86_VENDOR_AMD |X86_VENDOR_HYGON ) )return true;
xen/include/asm-x86/microcode.h +1 -11
@@ -10,7 +10,6 @@ enum microcode_match_result { };struct cpu_signature ; -struct ucode_cpu_info ; struct microcode_patch { union {
@@ -38,16 +37,7 @@ struct cpu_signature {unsigned int rev; }; -struct ucode_cpu_info { -struct cpu_signature cpu_sig; -union { -struct microcode_intel *mc_intel; -struct microcode_amd *mc_amd; -void *mc_valid; - } mc; -}; - -DECLARE_PER_CPU(struct ucode_cpu_info, ucode_cpu_info); +DECLARE_PER_CPU(struct cpu_signature, cpu_sig);extern const struct microcode_ops *microcode_ops;const struct microcode_patch *microcode_get_cache (void );
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 6/16 microcode: remove pointless 'cpu' parameter
In reply to Chao GaoSome callbacks in microcode_ops or related functions take a cpu id parameter. But at current call sites, the cpu id parameter is always equal to current cpu id. Some of them even use an assertion to guarantee this. Remove this redundent 'cpu' parameter.
---
Changes in v9:
- use a convenience variable 'cpu' in collect_cpu_info() on AMD side
- rebase and fix conflicts
Changes in v8:
- Use current_cpu_data in collect_cpu_info()
- keep the cpu parameter of check_final_patch_levels()
- use smp_processor_id() in get_matching_microcode() rather than define a local variable and label it "__maybe_unused"
--- xen/arch/x86/acpi/power.c | 2 +- xen/arch/x86/microcode.c | 20 ++++++++------------ xen/arch/x86/microcode_amd.c | 34 +++++++++++++--------------------- xen/arch/x86/microcode_intel.c | 41 +++++++++++++++-------------------------- xen/arch/x86/smpboot.c | 2 +- xen/include/asm-x86/microcode.h | 7 +++---- xen/include/asm-x86/processor.h | 2 +- 7 files changed, 42 insertions(+), 66 deletions(-)
xen/arch/x86/acpi/power.c +1 -1
@@ -278,7 +278,7 @@ static int enter_state(u32 state)console_end_sync (); -microcode_resume_cpu (0 ); +microcode_resume_cpu ();if ( !recheck_cpu_features (0 ) )panic ("Missing previously available feature(s)\n" );
xen/arch/x86/microcode.c +8 -12
@@ -196,19 +196,19 @@ struct microcode_info {char buffer[1 ]; }; -int microcode_resume_cpu (unsigned int cpu) +int microcode_resume_cpu (void ) {int err; -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +struct cpu_signature *sig = &this_cpu (cpu_sig);if ( !microcode_ops )return 0 ;spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (cpu, sig); + err = microcode_ops->collect_cpu_info (sig);if (likely (!err) ) - err = microcode_ops->apply_microcode (cpu); + err = microcode_ops->apply_microcode ();spin_unlock (µcode_mutex);return err;
@@ -257,9 +257,9 @@ static int microcode_update_cpu(const void *buf, size_t size)spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (cpu, sig); + err = microcode_ops->collect_cpu_info (sig);if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (cpu, buf, size); + err = microcode_ops->cpu_request_microcode (buf, size);spin_unlock (µcode_mutex);return err;
@@ -348,8 +348,6 @@ __initcall(microcode_init);int __init early_microcode_update_cpu (bool start_update) { -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);int rc =0 ;void *data =NULL ;size_t len;
@@ -368,7 +366,7 @@ int __init early_microcode_update_cpu(bool start_update) data =bootstrap_map (&ucode_mod); } - microcode_ops->collect_cpu_info (cpu, sig); + microcode_ops->collect_cpu_info (&this_cpu (cpu_sig));if ( data ) {
@@ -386,8 +384,6 @@ int __init early_microcode_update_cpu(bool start_update)int __init early_microcode_init (void ) { -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);int rc; rc =microcode_init_intel ();
@@ -400,7 +396,7 @@ int __init early_microcode_init(void)if ( microcode_ops ) { - microcode_ops->collect_cpu_info (cpu, sig); + microcode_ops->collect_cpu_info (&this_cpu (cpu_sig));if ( ucode_mod.mod_end || ucode_blob.size ) rc =early_microcode_update_cpu (true);
xen/arch/x86/microcode_amd.c +13 -21
@@ -78,8 +78,9 @@ struct mpbhdr {static DEFINE_SPINLOCK (microcode_update_lock);/* See comment in start_update() for cases when this routine fails */ -static int collect_cpu_info (unsigned int cpu,struct cpu_signature *csig) +static int collect_cpu_info (struct cpu_signature *csig) { +unsigned int cpu =smp_processor_id ();struct cpuinfo_x86 *c = &cpu_data[cpu];memset (csig,0 ,sizeof (*csig));
@@ -153,17 +154,15 @@ static bool_t find_equiv_cpu_id(const struct equiv_cpu_entry *equiv_cpu_table, }static enum microcode_match_result microcode_fits ( -const struct microcode_amd *mc_amd,unsigned int cpu) +const struct microcode_amd *mc_amd) { +unsigned int cpu =smp_processor_id ();const struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_header_amd *mc_header = mc_amd->mpb;const struct equiv_cpu_entry *equiv_cpu_table = mc_amd->equiv_cpu_table;unsigned int current_cpu_id;unsigned int equiv_cpu_id; -/* We should bind the task to the CPU */ -BUG_ON (cpu !=raw_smp_processor_id ()); - current_cpu_id =cpuid_eax (0x00000001 );if ( !find_equiv_cpu_id (equiv_cpu_table, current_cpu_id, &equiv_cpu_id) )
@@ -192,9 +191,7 @@ static enum microcode_match_result microcode_fits(static bool match_cpu (const struct microcode_patch *patch) { -if ( !patch ) -return false; -return microcode_fits (patch->mc_amd,smp_processor_id ()) ==NEW_UCODE ; +return patch && (microcode_fits (patch->mc_amd) ==NEW_UCODE ); } static struct microcode_patch *alloc_microcode_patch(
@@ -246,8 +243,8 @@ static enum microcode_match_result compare_patch(const struct microcode_header_amd *old_header = old->mc_amd->mpb;/* Both patches to compare are supposed to be applicable to local CPU. */ -ASSERT (microcode_fits (new->mc_amd,smp_processor_id ()) !=MIS_UCODE ); -ASSERT (microcode_fits (new->mc_amd,smp_processor_id ()) !=MIS_UCODE ); +ASSERT (microcode_fits (new->mc_amd) !=MIS_UCODE ); +ASSERT (microcode_fits (new->mc_amd) !=MIS_UCODE );if ( new_header->processor_rev_id == old_header->processor_rev_id ) return (new_header->patch_id > old_header->patch_id) ?
@@ -256,18 +253,16 @@ static enum microcode_match_result compare_patch(return MIS_UCODE ; } -static int apply_microcode (unsigned int cpu) +static int apply_microcode (void ) {unsigned long flags;uint32_t rev;int hw_err; +unsigned int cpu =smp_processor_id ();struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_header_amd *hdr;const struct microcode_patch *patch =microcode_get_cache (); -/* We should bind the task to the CPU */ -BUG_ON (raw_smp_processor_id () != cpu); -if ( !patch )return -ENOENT ;
@@ -461,19 +456,16 @@ static bool_t check_final_patch_levels(unsigned int cpu)return 0 ; } -static int cpu_request_microcode (unsigned int cpu,const void *buf, -size_t bufsize) +static int cpu_request_microcode (const void *buf,size_t bufsize) {struct microcode_amd *mc_amd;size_t offset =0 ;int error =0 ;unsigned int current_cpu_id;unsigned int equiv_cpu_id; +unsigned int cpu =smp_processor_id ();const struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); -/* We should bind the task to the CPU */ -BUG_ON (cpu !=raw_smp_processor_id ()); - current_cpu_id =cpuid_eax (0x00000001 );if ( *(const uint32_t *)buf !=UCODE_MAGIC )
@@ -566,14 +558,14 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf, }/* Update cache if this patch covers current CPU */ -if (microcode_fits (new_patch->mc_amd, cpu) !=MIS_UCODE ) +if (microcode_fits (new_patch->mc_amd) !=MIS_UCODE )microcode_update_cache (new_patch);else microcode_free_patch (new_patch);if (match_cpu (microcode_get_cache ()) ) { - error =apply_microcode (cpu); + error =apply_microcode ();if ( error )break ; }
xen/arch/x86/microcode_intel.c +15 -26
125 lines not on this page · raw message
xen/arch/x86/smpboot.c +1 -1
@@ -363,7 +363,7 @@ void start_secondary(void *unused)if ( system_state <= SYS_STATE_smp_boot )early_microcode_update_cpu (false);else -microcode_resume_cpu (cpu); +microcode_resume_cpu ();/* * If MSR_SPEC_CTRL is available, apply Xen's default setting and discard
xen/include/asm-x86/microcode.h +3 -4
@@ -20,10 +20,9 @@ struct microcode_patch { };struct microcode_ops { -int (*cpu_request_microcode)(unsigned int cpu,const void *buf, -size_t size); -int (*collect_cpu_info)(unsigned int cpu,struct cpu_signature *csig); -int (*apply_microcode)(unsigned int cpu); +int (*cpu_request_microcode)(const void *buf,size_t size); +int (*collect_cpu_info)(struct cpu_signature *csig); +int (*apply_microcode)(void );int (*start_update)(void );void (*free_patch)(void *mc);bool (*match_cpu)(const struct microcode_patch *patch);
xen/include/asm-x86/processor.h +1 -1
@@ -569,7 +569,7 @@ int guest_wrmsr_xen(struct vcpu *v, uint32_t idx, uint64_t val);void microcode_set_module (unsigned int );int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void ),unsigned long len); -int microcode_resume_cpu (unsigned int cpu); +int microcode_resume_cpu (void );int early_microcode_update_cpu (bool start_update);int early_microcode_init (void );int microcode_init_intel (void );
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 7/16 microcode/amd: call svm_host_osvw_init() in common code
In reply to Chao GaoIntroduce a vendor hook, .end_update_percpu, for svm_host_osvw_init(). The hook function is called on each cpu after loading an update. It is a preparation for spliting out apply_microcode() from cpu_request_microcode().
Note that svm_host_osvm_init() should be called regardless of the result of loading an update.
---
Changes in v10:
- rename end_update to end_update_percpu.
- use #ifdef rather than #if and frame the implementation with
Changes in v9:
- call .end_update in early loading path
- on AMD side, initialize .{start,end}_update only if "CONFIG_HVM" is true.
--- xen/arch/x86/microcode.c | 10 +++++++++- xen/arch/x86/microcode_amd.c | 25 ++++++++++++------------- xen/include/asm-x86/microcode.h | 1 + 3 files changed, 22 insertions(+), 14 deletions(-)
xen/arch/x86/microcode.c +9 -1
@@ -276,6 +276,9 @@ static long do_microcode_update(void *_info)if ( error ) info->error = error; +if ( microcode_ops->end_update_percpu ) + microcode_ops->end_update_percpu (); + info->cpu =cpumask_next (info->cpu, &cpu_online_map);if ( info->cpu < nr_cpu_ids )return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info);
@@ -376,7 +379,12 @@ int __init early_microcode_update_cpu(bool start_update)if ( rc )return rc; -return microcode_update_cpu (data, len); + rc =microcode_update_cpu (data, len); + +if ( microcode_ops->end_update_percpu ) + microcode_ops->end_update_percpu (); + +return rc; }else return -ENOMEM ;
xen/arch/x86/microcode_amd.c +12 -13
@@ -600,10 +600,6 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)free_patch (mc_amd); out: -#if CONFIG_HVM -svm_host_osvw_init (); -#endif -/* * In some cases we may return an error even if processor's microcode has * been updated. For example, the first patch in a container file is loaded
@@ -613,29 +609,32 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)return error; } +#ifdef CONFIG_HVM static int start_update (void ) { -#if CONFIG_HVM /* -* We assume here that svm_host_osvw_init() will be called on each cpu (from -* cpu_request_microcode()). -* -* Note that if collect_cpu_info() returns an error then -* cpu_request_microcode() will not invoked thus leaving OSVW bits not -* updated. Currently though collect_cpu_info() will not fail on processors -* supporting OSVW so we will not deal with this possibility. +* svm_host_osvw_init() will be called on each cpu by calling '.end_update' +* in common code. */ svm_host_osvw_reset (); -#endif return 0 ; } +static void end_update_percpu (void ) +{ +svm_host_osvw_init (); +} +#endif +static const struct microcode_ops microcode_amd_ops = { .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode, +#ifdef CONFIG_HVM .start_update = start_update, + .end_update_percpu = end_update_percpu, +#endif .free_patch = free_patch, .compare_patch = compare_patch, .match_cpu = match_cpu,
xen/include/asm-x86/microcode.h +1 -0
@@ -24,6 +24,7 @@ struct microcode_ops {int (*collect_cpu_info)(struct cpu_signature *csig);int (*apply_microcode)(void );int (*start_update)(void ); +void (*end_update_percpu)(void );void (*free_patch)(void *mc);bool (*match_cpu)(const struct microcode_patch *patch); enum microcode_match_result (*compare_patch)(
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 07/16] microcode/amd: call svm_host_osvw_init() in common code
Quoted 10 lines · Chao Gao
Introduce a vendor hook, .end_update_percpu, for
svm_host_osvw_init(). The hook function is called on each cpu after loading an update. It is a preparation for spliting outapply_microcode()fromcpu_request_microcode().Note that
svm_host_osvm_init()should be called regardless of the result of loading an update.Signed-off-by Chao Gao <[email protected]>Reviewed-by Roger Pau Monné <[email protected]>
albeit with one further remark:
Quoted 19 lines
xen/arch/x86/microcode_amd.c +3
-8@@ -613,29 +609,32 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)return error; } +#ifdef CONFIG_HVM static int start_update (void ) { -#if CONFIG_HVM /* -* We assume here that svm_host_osvw_init() will be called on each cpu (from -* cpu_request_microcode()). -* -* Note that if collect_cpu_info() returns an error then -* cpu_request_microcode() will not invoked thus leaving OSVW bits not -* updated. Currently though collect_cpu_info() will not fail on processors -* supporting OSVW so we will not deal with this possibility. +* svm_host_osvw_init() will be called on each cpu by calling '.end_update' +* in common code. */
xen/arch/x86/microcode_amd.c static int cpu_request_microcode(const void *buf, size_t bufsize) · line 627
Quoted 10 lines
xen/arch/x86/microcode_amd.c +4
-1svm_host_osvw_reset (); -#endif return 0 ; } +static void end_update_percpu (void ) +{ +svm_host_osvw_init (); +}
I don't see the need for this wrapper, you could ...
xen/arch/x86/microcode_amd.c static int cpu_request_microcode(const void *buf, size_t bufsize) · line 636
Quoted 9 lines
xen/arch/x86/microcode_amd.c +4
-0+#endif +static const struct microcode_ops microcode_amd_ops = { .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode, +#ifdef CONFIG_HVM .start_update = start_update, + .end_update_percpu = end_update_percpu,
... use svm_host_osvw_init here directly.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 8/16 microcode: pass a patch pointer to apply_microcode()
In reply to Chao Gaoapply_microcode()'s always loading the cached ucode patch forces a patch to be stored before being loaded. Make apply_microcode() accept a patch pointer to remove the limitation so that a patch can be stored after a successful loading.
--- xen/arch/x86/microcode.c | 2 +- xen/arch/x86/microcode_amd.c | 5 ++--- xen/arch/x86/microcode_intel.c | 5 ++--- xen/include/asm-x86/microcode.h | 2 +- 4 files changed, 6 insertions(+), 8 deletions(-)
xen/arch/x86/microcode.c +1 -1
@@ -208,7 +208,7 @@ int microcode_resume_cpu(void) err = microcode_ops->collect_cpu_info (sig);if (likely (!err) ) - err = microcode_ops->apply_microcode (); + err = microcode_ops->apply_microcode (microcode_cache);spin_unlock (µcode_mutex);return err;
xen/arch/x86/microcode_amd.c +2 -3
@@ -253,7 +253,7 @@ static enum microcode_match_result compare_patch(return MIS_UCODE ; } -static int apply_microcode (void ) +static int apply_microcode (const struct microcode_patch *patch) {unsigned long flags;uint32_t rev;
@@ -261,7 +261,6 @@ static int apply_microcode(void)unsigned int cpu =smp_processor_id ();struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_header_amd *hdr; -const struct microcode_patch *patch =microcode_get_cache ();if ( !patch )return -ENOENT ;
@@ -565,7 +564,7 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)if (match_cpu (microcode_get_cache ()) ) { - error =apply_microcode (); + error =apply_microcode (microcode_get_cache ());if ( error )break ; }
xen/arch/x86/microcode_intel.c +2 -3
@@ -323,7 +323,7 @@ static int get_matching_microcode(const void *mc)return 1 ; } -static int apply_microcode (void ) +static int apply_microcode (const struct microcode_patch *patch) {unsigned long flags;uint64_t msr_content;
@@ -331,7 +331,6 @@ static int apply_microcode(void)unsigned int cpu_num =raw_smp_processor_id ();struct cpu_signature *sig = &this_cpu (cpu_sig);const struct microcode_intel *mc_intel; -const struct microcode_patch *patch =microcode_get_cache ();if ( !patch )return -ENOENT ;
@@ -429,7 +428,7 @@ static int cpu_request_microcode(const void *buf, size_t size) error = offset;if ( !error &&match_cpu (microcode_get_cache ()) ) - error =apply_microcode (); + error =apply_microcode (microcode_get_cache ());return error; }
xen/include/asm-x86/microcode.h +1 -1
@@ -22,7 +22,7 @@ struct microcode_patch {struct microcode_ops {int (*cpu_request_microcode)(const void *buf,size_t size);int (*collect_cpu_info)(struct cpu_signature *csig); -int (*apply_microcode)(void ); +int (*apply_microcode)(const struct microcode_patch *patch);int (*start_update)(void );void (*end_update_percpu)(void );void (*free_patch)(void *mc);
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 9/16 microcode: split out apply_microcode() from cpu_request_microcode()
In reply to Chao GaoDuring late microcode loading, apply_microcode() is invoked in cpu_request_microcode(). To make late microcode update more reliable, we want to put the apply_microcode() into stop_machine context. So we split out it from cpu_request_microcode(). In general, for both early loading on BSP and late loading, cpu_request_microcode() is called first to get the matching microcode update contained by the blob and then apply_microcode() is invoked explicitly on each cpu in common code.
Given that all CPUs are supposed to have the same signature, parsing microcode only needs to be done once. So cpu_request_microcode() is also moved out of microcode_update_cpu().
In some cases (e.g. a broken bios), the system may have multiple revisions of microcode update. So we would try to load a microcode update as long as it covers current cpu. And if a cpu loads this patch successfully, the patch would be stored into the patch cache.
---
Changes in v10:
- make microcode_update_cache static
- raise an error if loading ucode failed with -EIO
- ensure end_update_percpu() is called following a successful call of start_update()
Changes in v9:
- remove the calling of ->compare_patch in microcode_update_cpu().
- drop "microcode_" prefix for static function - microcode_parse_blob().
- rebase and fix conflict
Changes in v8:
- divide the original patch into three patches to improve readability
- load an update on each cpu as long as the update covers current cpu
- store an update after the first successful loading on a CPU
- Make sure the current CPU (especially pf value) is covered by updates.
changes in v7:
- to handle load failure, unvalidated patches won't be cached. They are passed as function arguments. So if update failed, we needn't any cleanup to microcode cache.
--- xen/arch/x86/microcode.c | 182 +++++++++++++++++++++++++++------------- xen/arch/x86/microcode_amd.c | 38 +++++---- xen/arch/x86/microcode_intel.c | 66 +++++++-------- xen/include/asm-x86/microcode.h | 5 +- 4 files changed, 178 insertions(+), 113 deletions(-)
xen/arch/x86/microcode.c +123 -59
@@ -189,12 +189,19 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig); -struct microcode_info { -unsigned int cpu; -uint32_t buffer_size; -int error; -char buffer[1 ]; -}; +/* +* Return a patch that covers current CPU. If there are multiple patches, +* return the one with the highest revision number. Return error If no +* patch is found and an error occurs during the parsing process. Otherwise +* return NULL. +*/ +static struct microcode_patch *parse_blob (const char *buf,size_t len) +{ +if (likely (!microcode_ops->collect_cpu_info (&this_cpu (cpu_sig))) ) +return microcode_ops->cpu_request_microcode (buf, len); + +return NULL ; +}int microcode_resume_cpu (void ) {
@@ -220,15 +227,8 @@ void microcode_free_patch(struct microcode_patch *microcode_patch)xfree (microcode_patch); } -const struct microcode_patch *microcode_get_cache (void ) -{ -ASSERT (spin_is_locked (µcode_mutex)); - -return microcode_cache; -} -/* Return true if cache gets updated. Otherwise, return false */ -bool microcode_update_cache (struct microcode_patch *patch) +static bool microcode_update_cache (struct microcode_patch *patch) {ASSERT (spin_is_locked (µcode_mutex));
@@ -249,49 +249,80 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); -spin_lock (µcode_mutex); +if (unlikely (err) ) +return err; - err = microcode_ops->collect_cpu_info (sig); -if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); -spin_unlock (µcode_mutex); +if ( patch ) + err = microcode_ops->apply_microcode (patch); +else if ( microcode_cache ) + { +spin_lock (µcode_mutex); + err = microcode_ops->apply_microcode (microcode_cache); +if ( err == -EIO ) + { +microcode_free_patch (microcode_cache); + microcode_cache =NULL ; + } +spin_unlock (µcode_mutex); + } +else +/* No patch to update */ + err = -ENOENT ;return err; } -static long do_microcode_update (void *_info) +static long do_microcode_update (void *patch) { -struct microcode_info *info = _info; -int error; - -BUG_ON (info->cpu !=smp_processor_id ()); +unsigned int cpu; +int ret =microcode_update_cpu (patch); - error =microcode_update_cpu (info->buffer, info->buffer_size); -if ( error ) - info->error = error; +/* Store the patch after a successful loading */ +if ( !ret && patch ) + { +spin_lock (µcode_mutex); +microcode_update_cache (patch); +spin_unlock (µcode_mutex); + patch =NULL ; + }if ( microcode_ops->end_update_percpu ) microcode_ops->end_update_percpu (); - info->cpu =cpumask_next (info->cpu, &cpu_online_map); -if ( info->cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info); +/* +* Each thread tries to load ucode and only the first thread of a core +* would succeed. Ignore error other than -EIO. +*/ +if ( ret != -EIO ) + ret =0 ; + + cpu =cpumask_next (smp_processor_id (), &cpu_online_map); +if ( cpu < nr_cpu_ids ) +return continue_hypercall_on_cpu (cpu, do_microcode_update, patch) ? + : ret; - error = info->error; -xfree (info); -return error; +/* Free the patch if no CPU has loaded it successfully. */ +if ( patch ) +microcode_free_patch (patch); + +return ret; }int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void) buf,unsigned long len) {int ret; -struct microcode_info *info; +void *buffer; +struct microcode_patch *patch;if ( len != (uint32_t )len )return -E2BIG ;
@@ -299,32 +330,46 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)if ( microcode_ops ==NULL )return -EINVAL ; - info =xmalloc_bytes (sizeof (*info) + len); -if ( info ==NULL ) + buffer =xmalloc_bytes (len); +if ( !buffer )return -ENOMEM ; - ret =copy_from_guest (info->buffer, buf, len); -if ( ret !=0 ) +if (copy_from_guest (buffer, buf, len) ) + { + ret = -EFAULT ; + goto free; + } + + patch =parse_blob (buffer, len); +if (IS_ERR (patch) ) { -xfree (info); -return ret; + ret =PTR_ERR (patch); +printk (XENLOG_WARNING "Parsing microcode blob error %d\n" , ret); + goto free; } - info->buffer_size = len; - info->error =0 ; - info->cpu =cpumask_first (&cpu_online_map); +if ( !patch ) + { + ret = -ENOENT ; + goto free; + }if ( microcode_ops->start_update ) { ret = microcode_ops->start_update ();if ( ret !=0 ) { -xfree (info); -return ret; +microcode_free_patch (patch); + goto free; } } -return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info); + ret =continue_hypercall_on_cpu (cpumask_first (&cpu_online_map), + do_microcode_update, patch); + + free: +xfree (buffer); +return ret; }static int __init microcode_init (void )
@@ -371,23 +416,42 @@ int __init early_microcode_update_cpu(bool start_update) microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); -if ( data ) +if ( !data ) +return -ENOMEM ; + +if ( start_update ) { -if ( start_update && microcode_ops->start_update ) +struct microcode_patch *patch; + + patch =parse_blob (data, len); +if (IS_ERR (patch) ) + { +printk (XENLOG_WARNING "Parsing microcode blob error %ld\n" , +PTR_ERR (patch)); +return PTR_ERR (patch); + } + +if ( !patch ) +return -ENOENT ; + +spin_lock (µcode_mutex); + rc =microcode_update_cache (patch); +spin_unlock (µcode_mutex); +ASSERT (rc); + +if ( microcode_ops->start_update ) rc = microcode_ops->start_update ();if ( rc )return rc; + } - rc =microcode_update_cpu (data, len); + rc =microcode_update_cpu (NULL ); -if ( microcode_ops->end_update_percpu ) - microcode_ops->end_update_percpu (); +if ( microcode_ops->end_update_percpu ) + microcode_ops->end_update_percpu (); -return rc; - } -else -return -ENOMEM ; +return rc; }int __init early_microcode_init (void )
xen/arch/x86/microcode_amd.c +20 -18
@@ -455,9 +455,11 @@ static bool_t check_final_patch_levels(unsigned int cpu)return 0 ; } -static int cpu_request_microcode (const void *buf,size_t bufsize) +static struct microcode_patch *cpu_request_microcode (const void *buf, +size_t bufsize) {struct microcode_amd *mc_amd; +struct microcode_patch *patch =NULL ;size_t offset =0 ;int error =0 ;unsigned int current_cpu_id;
@@ -556,19 +558,22 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)break ; } -/* Update cache if this patch covers current CPU */ -if (microcode_fits (new_patch->mc_amd) !=MIS_UCODE ) -microcode_update_cache (new_patch); -else -microcode_free_patch (new_patch); - -if (match_cpu (microcode_get_cache ()) ) +/* +* If the new patch covers current CPU, compare patches and store the +* one with higher revision. +*/ +if ( (microcode_fits (new_patch->mc_amd) !=MIS_UCODE ) && + (!patch || (compare_patch (new_patch, patch) ==NEW_UCODE )) ) { - error =apply_microcode (microcode_get_cache ()); -if ( error ) -break ; +struct microcode_patch *tmp = patch; + + patch = new_patch; + new_patch = tmp; } +if ( new_patch ) +microcode_free_patch (new_patch); +if ( offset >= bufsize )break ;
@@ -599,13 +604,10 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)free_patch (mc_amd); out: -/* -* In some cases we may return an error even if processor's microcode has -* been updated. For example, the first patch in a container file is loaded -* successfully but subsequent container file processing encounters a -* failure. -*/ -return error; +if ( error && !patch ) + patch =ERR_PTR (error); + +return patch; }#ifdef CONFIG_HVM
xen/arch/x86/microcode_intel.c +33 -33
108 lines not on this page · raw message
xen/include/asm-x86/microcode.h +2 -3
@@ -20,7 +20,8 @@ struct microcode_patch { };struct microcode_ops { -int (*cpu_request_microcode)(const void *buf,size_t size); +struct microcode_patch *(*cpu_request_microcode)(const void *buf, +size_t size);int (*collect_cpu_info)(struct cpu_signature *csig);int (*apply_microcode)(const struct microcode_patch *patch);int (*start_update)(void );
@@ -40,8 +41,6 @@ struct cpu_signature { DECLARE_PER_CPU(struct cpu_signature, cpu_sig);extern const struct microcode_ops *microcode_ops; -const struct microcode_patch *microcode_get_cache (void ); -bool microcode_update_cache (struct microcode_patch *patch);void microcode_free_patch (struct microcode_patch *patch);#endif /* ASM_X86__MICROCODE_H */
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 09/16] microcode: split out apply_microcode() from cpu_request_microcode()
Quoted 29 lines · Chao Gao
xen/arch/x86/microcode.c +13
-9@@ -249,49 +249,80 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); -spin_lock (µcode_mutex); +if (unlikely (err) ) +return err; - err = microcode_ops->collect_cpu_info (sig); -if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); -spin_unlock (µcode_mutex); +if ( patch ) + err = microcode_ops->apply_microcode (patch); +else if ( microcode_cache )
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 277
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+ { +spin_lock (µcode_mutex); + err = microcode_ops->apply_microcode (microcode_cache); +if ( err == -EIO ) + { +microcode_free_patch (microcode_cache); + microcode_cache =NULL ; + } +spin_unlock (µcode_mutex); + }
I'm having trouble understanding the locking discipline here: Why do you call ->apply_microcode() once with the lock held and once without? If this is to guard against microcode_cache changing, then (a) the check of it being non-NULL would need to be done with the lock held as well and (b) you'd need to explain why the non- locked call to ->apply_microcode() is okay.
It certainly wasn't this way in v8, yet the v9 revision log also doesn't mention such a (not insignificant) change (which is part of the reason why I didn't spot it in v9).
Quoted 31 lines
xen/arch/x86/microcode.c +14
-8+else +/* No patch to update */ + err = -ENOENT ;return err; } -static long do_microcode_update (void *_info) +static long do_microcode_update (void *patch) { -struct microcode_info *info = _info; -int error; - -BUG_ON (info->cpu !=smp_processor_id ()); +unsigned int cpu; +int ret =microcode_update_cpu (patch); - error =microcode_update_cpu (info->buffer, info->buffer_size); -if ( error ) - info->error = error; +/* Store the patch after a successful loading */ +if ( !ret && patch ) + { +spin_lock (µcode_mutex); +microcode_update_cache (patch); +spin_unlock (µcode_mutex); + patch =NULL ; + }if ( microcode_ops->end_update_percpu ) microcode_ops->end_update_percpu ();
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 307
Quoted 10 lines
xen/arch/x86/microcode.c +6
-3- info->cpu =cpumask_next (info->cpu, &cpu_online_map); -if ( info->cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info); +/* +* Each thread tries to load ucode and only the first thread of a core +* would succeed. Ignore error other than -EIO. +*/ +if ( ret != -EIO ) + ret =0 ;
I don't think this is a good idea. Ignoring a _specific_ error code (e.g. indicating "already loaded" or "newer patch already loaded") is fine, but here you also ignore things like -ENOMEM or -EINVAL.
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 312
Quoted 4 lines
xen/arch/x86/microcode.c +4
-0+ cpu =cpumask_next (smp_processor_id (), &cpu_online_map); +if ( cpu < nr_cpu_ids ) +return continue_hypercall_on_cpu (cpu, do_microcode_update, patch) ? + : ret;
When there's no middle operand I don't think ? and : should be on separate lines.
Quoted 9 lines
xen/arch/x86/microcode.c +2
-2@@ -299,32 +330,46 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)if ( microcode_ops ==NULL )return -EINVAL ; - info =xmalloc_bytes (sizeof (*info) + len); -if ( info ==NULL ) + buffer =xmalloc_bytes (len); +if ( !buffer )return -ENOMEM ;
xen/arch/x86/microcode.c int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) · line 343
Quoted 10 lines
xen/arch/x86/microcode.c +7
-2- ret =copy_from_guest (info->buffer, buf, len); -if ( ret !=0 ) +if (copy_from_guest (buffer, buf, len) ) + { + ret = -EFAULT ; + goto free; + } + + patch =parse_blob (buffer, len);
You don't look to be using buffer anymore below this point. Why don't you free it right here, avoiding the need for the "free" label below and also further reducing the overall code churn as it seems.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 09/16] microcode: split out apply_microcode() from cpu_request_microcode()
Quoted 36 lines · Jan Beulich
Quoted 35 lines · Chao Gao
xen/arch/x86/microcode.c +19
-9@@ -249,49 +249,80 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); -spin_lock (µcode_mutex); +if (unlikely (err) ) +return err; - err = microcode_ops->collect_cpu_info (sig); -if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); -spin_unlock (µcode_mutex); +if ( patch ) + err = microcode_ops->apply_microcode (patch); +else if ( microcode_cache ) + { +spin_lock (µcode_mutex); + err = microcode_ops->apply_microcode (microcode_cache); +if ( err == -EIO ) + { +microcode_free_patch (microcode_cache);
Quoted 8 lines
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 277
Quoted 4 lines
xen/arch/x86/microcode.c +4
-0+ microcode_cache =NULL ; + } +spin_unlock (µcode_mutex); + }I'm having trouble understanding the locking discipline here: Why do you call ->apply_microcode() once with the lock held and once without? If this is to guard against
microcode_cachechanging,
Yes. microcode_cache is protected by microcode_mutex;
Quoted 2 lines
then (a) the check of it being non-NULL would need to be done with the lock held as well and
Will do.
Quoted 2 lines
(b) you'd need to explain why the non-
locked call to ->apply_microcode() is okay.
->apply_microcode() was always called with this lock held was because it always read the old per-cpu cache which was protected by the lock. It gave us an impression that ->apply_microcode() was protected by the lock.
The patch before this one makes ->apply_microcode() accept a patch pointer. With this change, if the patch being passed should be accessed with some lock held (like the secondary call site above), we acquire the lock. Otherwise, no lock is taken and the caller of microcode_update_cpu() is supposed to guarantee the patch won't be changed by others.
Quoted 4 lines
It certainly wasn't this way in v8, yet the v9 revision log also doesn't mention such a (not insignificant) change (which is part of the reason why I didn't spot it in v9).
It is my bad.
Quoted 33 lines
Quoted 33 lines
xen/arch/x86/microcode.c +14
-8+else +/* No patch to update */ + err = -ENOENT ;return err; } -static long do_microcode_update (void *_info) +static long do_microcode_update (void *patch) { -struct microcode_info *info = _info; -int error; - -BUG_ON (info->cpu !=smp_processor_id ()); +unsigned int cpu; +int ret =microcode_update_cpu (patch); - error =microcode_update_cpu (info->buffer, info->buffer_size); -if ( error ) - info->error = error; +/* Store the patch after a successful loading */ +if ( !ret && patch ) + { +spin_lock (µcode_mutex); +microcode_update_cache (patch); +spin_unlock (µcode_mutex); + patch =NULL ; + }if ( microcode_ops->end_update_percpu ) microcode_ops->end_update_percpu ();
Quoted 14 lines
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 307
Quoted 9 lines
xen/arch/x86/microcode.c +6
-3- info->cpu =cpumask_next (info->cpu, &cpu_online_map); -if ( info->cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info); +/* +* Each thread tries to load ucode and only the first thread of a core +* would succeed. Ignore error other than -EIO. +*/ +if ( ret != -EIO ) + ret =0 ;I don't think this is a good idea. Ignoring a _specific_ error code (e.g. indicating "already loaded" or "newer patch already loaded") is fine, but here you also ignore things like
-ENOMEMor-EINVAL.
will do.
Quoted 19 lines
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 312
Quoted 5 lines
xen/arch/x86/microcode.c +4
-0+ cpu =cpumask_next (smp_processor_id (), &cpu_online_map); +if ( cpu < nr_cpu_ids ) +return continue_hypercall_on_cpu (cpu, do_microcode_update, patch) ? + : ret;When there's no middle operand I don't think ? and : should be on separate lines.
Quoted 10 lines
xen/arch/x86/microcode.c +2
-2@@ -299,32 +330,46 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)if ( microcode_ops ==NULL )return -EINVAL ; - info =xmalloc_bytes (sizeof (*info) + len); -if ( info ==NULL ) + buffer =xmalloc_bytes (len); +if ( !buffer )return -ENOMEM ;
Quoted 13 lines
xen/arch/x86/microcode.c int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) · line 343
Quoted 9 lines
xen/arch/x86/microcode.c +7
-2- ret =copy_from_guest (info->buffer, buf, len); -if ( ret !=0 ) +if (copy_from_guest (buffer, buf, len) ) + { + ret = -EFAULT ; + goto free; + } + + patch =parse_blob (buffer, len);You don't look to be using buffer anymore below this point. Why don't you free it right here, avoiding the need for the "free" label below and also further reducing the overall code churn as it seems.
Yes. Good idea.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 10/16 microcode: unify ucode loading during system bootup and resuming
In reply to Chao GaoDuring system bootup and resuming, CPUs just load the cached ucode. So one unified function microcode_update_one() is introduced. It takes a boolean to indicate whether ->start_update should be called. Since early_microcode_update_cpu() is only called on BSP (APs call the unified function), start_update is always true and so remove this parameter.
There is a functional change: ->start_update is called on BSP and ->end_update_percpu is called during system resuming. They are not invoked by previous microcode_resume_cpu().
---
Changes in v10:
- call ->start_update for system resume from suspension
Changes in v9:
- return -EOPNOTSUPP rather than 0 if microcode_ops is NULL in microcode_update_one()
- rebase and fix conflicts.
Changes in v8:
- split out from the previous patch
--- xen/arch/x86/acpi/power.c | 2 +- xen/arch/x86/microcode.c | 91 +++++++++++++++++++---------------------- xen/arch/x86/smpboot.c | 5 +-- xen/include/asm-x86/processor.h | 4 +- 4 files changed, 45 insertions(+), 57 deletions(-)
xen/arch/x86/acpi/power.c +1 -1
@@ -278,7 +278,7 @@ static int enter_state(u32 state)console_end_sync (); -microcode_resume_cpu (); +microcode_update_one (true);if ( !recheck_cpu_features (0 ) )panic ("Missing previously available feature(s)\n" );
xen/arch/x86/microcode.c +41 -50
127 lines not on this page · raw message
xen/arch/x86/smpboot.c +1 -4
@@ -360,10 +360,7 @@ void start_secondary(void *unused)initialize_cpu_data (cpu); -if ( system_state <= SYS_STATE_smp_boot ) -early_microcode_update_cpu (false); -else -microcode_resume_cpu (); +microcode_update_one (false);/* * If MSR_SPEC_CTRL is available, apply Xen's default setting and discard
xen/include/asm-x86/processor.h +2 -2
@@ -569,9 +569,9 @@ int guest_wrmsr_xen(struct vcpu *v, uint32_t idx, uint64_t val);void microcode_set_module (unsigned int );int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void ),unsigned long len); -int microcode_resume_cpu (void ); -int early_microcode_update_cpu (bool start_update); +int early_microcode_update_cpu (void );int early_microcode_init (void ); +int microcode_update_one (bool start_update);int microcode_init_intel (void );int microcode_init_amd (void );
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 10/16] microcode: unify ucode loading during system bootup and resuming
Quoted 7 lines · Chao Gao
During system bootup and resuming, CPUs just load the cached ucode. So one unified function
microcode_update_one()is introduced. It takes a boolean to indicate whether ->start_update should be called. Sinceearly_microcode_update_cpu()is only called on BSP (APs call the unified function),start_updateis always true and so remove this parameter.
Quoted 5 lines
There is a functional change: ->start_update is called on BSP and ->end_update_percpu is called during system resuming. They are not invoked by previous
microcode_resume_cpu().Signed-off-by Chao Gao <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 11/16 microcode: reduce memory allocation and copy when creating a patch
In reply to Chao GaoTo create a microcode patch from a vendor-specific update, allocate_microcode_patch() copied everything from the update. It is not efficient. Essentially, we just need to go through ucodes in the blob, find the one with the newest revision and install it into the microcode_patch. In the process, buffers like mc_amd, equiv_cpu_table (on AMD side), and mc (on Intel side) can be reused. microcode_patch now is allocated after it is sure that there is a matching ucode.
---
Changes in v10:
- avoid unnecessary type casting
* introduce compare_header on AMD side
* specify the type of the first parameter of get_next_ucode_from_buffer() on Intel side
Changes in v9:
- new
--- xen/arch/x86/microcode_amd.c | 112 +++++++++++++++++------------------------ xen/arch/x86/microcode_intel.c | 67 +++++++++--------------- 2 files changed, 69 insertions(+), 110 deletions(-)
xen/arch/x86/microcode_amd.c +45 -67
@@ -194,36 +194,6 @@ static bool match_cpu(const struct microcode_patch *patch)return patch && (microcode_fits (patch->mc_amd) ==NEW_UCODE ); } -static struct microcode_patch *alloc_microcode_patch ( -const struct microcode_amd *mc_amd) -{ - struct microcode_patch *microcode_patch = xmalloc(struct microcode_patch); - struct microcode_amd *cache = xmalloc(struct microcode_amd); -void *mpb =xmalloc_bytes (mc_amd->mpb_size); -struct equiv_cpu_entry *equiv_cpu_table = -xmalloc_bytes (mc_amd->equiv_cpu_table_size); - -if ( !microcode_patch || !cache || !mpb || !equiv_cpu_table ) - { -xfree (microcode_patch); -xfree (cache); -xfree (mpb); -xfree (equiv_cpu_table); -return ERR_PTR (-ENOMEM ); - } - -memcpy (mpb, mc_amd->mpb, mc_amd->mpb_size); - cache->mpb = mpb; - cache->mpb_size = mc_amd->mpb_size; -memcpy (equiv_cpu_table, mc_amd->equiv_cpu_table, - mc_amd->equiv_cpu_table_size); - cache->equiv_cpu_table = equiv_cpu_table; - cache->equiv_cpu_table_size = mc_amd->equiv_cpu_table_size; - microcode_patch->mc_amd = cache; - -return microcode_patch; -} -static void free_patch (void *mc) {struct microcode_amd *mc_amd = mc;
@@ -236,6 +206,17 @@ static void free_patch(void *mc) } } +static enum microcode_match_result compare_header ( +const struct microcode_header_amd *new_header, +const struct microcode_header_amd *old_header) +{ +if ( new_header->processor_rev_id == old_header->processor_rev_id ) +return (new_header->patch_id > old_header->patch_id) ?NEW_UCODE + :OLD_UCODE ; + +return MIS_UCODE ; +} +static enum microcode_match_result compare_patch (const struct microcode_patch *new,const struct microcode_patch *old) {
@@ -246,11 +227,7 @@ static enum microcode_match_result compare_patch(ASSERT (microcode_fits (new->mc_amd) !=MIS_UCODE );ASSERT (microcode_fits (new->mc_amd) !=MIS_UCODE ); -if ( new_header->processor_rev_id == old_header->processor_rev_id ) -return (new_header->patch_id > old_header->patch_id) ? -NEW_UCODE :OLD_UCODE ; - -return MIS_UCODE ; +return compare_header (new_header, old_header); }static int apply_microcode (const struct microcode_patch *patch)
@@ -328,18 +305,10 @@ static int get_ucode_from_buffer_amd(return -EINVAL ; } -if ( mc_amd->mpb_size < mpbuf->len ) - { -if ( mc_amd->mpb ) - { -xfree (mc_amd->mpb); - mc_amd->mpb_size =0 ; - } - mc_amd->mpb =xmalloc_bytes (mpbuf->len); -if ( mc_amd->mpb ==NULL ) -return -ENOMEM ; - mc_amd->mpb_size = mpbuf->len; - } + mc_amd->mpb =xmalloc_bytes (mpbuf->len); +if ( !mc_amd->mpb ) +return -ENOMEM ; + mc_amd->mpb_size = mpbuf->len;memcpy (mc_amd->mpb, mpbuf->data, mpbuf->len); pr_debug("microcode: CPU%d size %zu, block size %u offset %zu equivID %#x rev %#x\n",
@@ -459,8 +428,9 @@ static struct microcode_patch *cpu_request_microcode(const void *buf, size_t bufsize) {struct microcode_amd *mc_amd; +struct microcode_header_amd *saved =NULL ;struct microcode_patch *patch =NULL ; -size_t offset =0 ; +size_t offset =0 , saved_size =0 ;int error =0 ;unsigned int current_cpu_id;unsigned int equiv_cpu_id;
@@ -550,29 +520,22 @@ static struct microcode_patch *cpu_request_microcode(const void *buf,while ( (error =get_ucode_from_buffer_amd (mc_amd, buf, bufsize, &offset)) ==0 ) { -struct microcode_patch *new_patch =alloc_microcode_patch (mc_amd); - -if (IS_ERR (new_patch) ) - { - error =PTR_ERR (new_patch); -break ; - } -/* -* If the new patch covers current CPU, compare patches and store the +* If the new ucode covers current CPU, compare ucodes and store the * one with higher revision. */ -if ( (microcode_fits (new_patch->mc_amd) !=MIS_UCODE ) && - (!patch || (compare_patch (new_patch, patch) ==NEW_UCODE )) ) +if ( (microcode_fits (mc_amd) !=MIS_UCODE ) && + (!saved || (compare_header (mc_amd->mpb, saved) ==NEW_UCODE )) ) { -struct microcode_patch *tmp = patch; - - patch = new_patch; - new_patch = tmp; +xfree (saved); + saved = mc_amd->mpb; + saved_size = mc_amd->mpb_size; + } +else + { +xfree (mc_amd->mpb); + mc_amd->mpb =NULL ; } - -if ( new_patch ) -microcode_free_patch (new_patch);if ( offset >= bufsize )break ;
@@ -601,7 +564,22 @@ static struct microcode_patch *cpu_request_microcode(const void *buf, *(const uint32_t *)(buf + offset) == UCODE_MAGIC ) break; } -free_patch (mc_amd); + +if ( saved ) + { + mc_amd->mpb = saved; + mc_amd->mpb_size = saved_size; + patch = xmalloc(struct microcode_patch); +if ( patch ) + patch->mc_amd = mc_amd; +else + { +free_patch (mc_amd); + error = -ENOMEM ; + } + } +else +free_patch (mc_amd); out:if ( error && !patch )
xen/arch/x86/microcode_intel.c +24 -43
104 lines not on this page · raw message
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 11/16] microcode: reduce memory allocation and copy when creating a patch
Quoted 11 lines · Chao Gao
To create a microcode patch from a vendor-specific update,
allocate_microcode_patch()copied everything from the update. It is not efficient. Essentially, we just need to go through ucodes in the blob, find the one with the newest revision and install it into themicrocode_patch. In the process, buffers likemc_amd,equiv_cpu_table(on AMD side), and mc (on Intel side) can be reused.microcode_patchnow is allocated after it is sure that there is a matching ucode.Signed-off-by Chao Gao <[email protected]>Reviewed-by Roger Pau Monné <[email protected]>
xen/arch/x86/microcode_intel.c static int apply_microcode(const struct microcode_patch *patch) · line 339
Quoted 9 lines
xen/arch/x86/microcode_intel.c +3
-2@@ -353,8 +334,9 @@ static int apply_microcode(const struct microcode_patch *patch)return 0 ; } -static long get_next_ucode_from_buffer (void **mc,const u8 *buf, -unsigned long size,long offset) +static long get_next_ucode_from_buffer (struct microcode_intel **mc, +const u8 *buf,unsigned long size, +long offset)
As you touch this anyway, it would have been nice if you had taken the time to correct the one or two style issues here (u8 -> uint8_t and likely long -> unsigned long).
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 12/16 x86/microcode: Synchronize late microcode loading
In reply to Chao GaoThis patch ports microcode improvement patches from linux kernel.
Before you read any further: the early loading method is still the preferred one and you should always do that. The following patch is improving the late loading mechanism for long running jobs and cloud use cases.
Gather all cores and serialize the microcode update on them by doing it one-by-one to make the late update process as reliable as possible and avoid potential issues caused by the microcode update.
---
Changes in v10:
- introduce wait_for_state() and set_state() helper functions
- make wait_for_condition() return bool and take const void *
- disable/enable watchdog in control thread
- rename "master" and "slave" thread to "primary" and "secondary"
Changes in v9:
- log __buildin_return_address(0) when timeout
- divide CPUs into three logical sets and they will call different functions during ucode loading. The 'control thread' is chosen to coordinate ucode loading on all CPUs. Since only control thread would set 'loading_state', we can get rid of 'cmpxchg' stuff in v8.
- s/rep_nop/cpu_relax
- each thread updates its revision number itself
- add XENLOG_ERR prefix for each line of multi-line log messages
Changes in v8:
- to support blocking #NMI handling during loading ucode
* introduce a flag, 'loading_state', to mark the start or end of ucode loading.
* use a bitmap for cpu callin since if cpu may stay in #NMI handling, there are two places for a cpu to call in. bitmap won't be counted twice.
* don't wait for all CPUs callout, just wait for CPUs that perform the update. We have to do this because some threads may be stuck in NMI handling (where cannot reach the rendezvous).
- emit a warning if the system stays in stop_machine context for more than 1s
- comment that rdtsc is fine while loading an update
- use cmpxchg() to avoid panic being called on multiple CPUs
- Propagate revision number to other threads
- refine comments and prompt messages
Changes in v7:
- Check whether 'timeout' is 0 rather than "<=0" since it is unsigned int.
- reword the comment above microcode_update_cpu() to clearly state that one thread per core should do the update.
--- xen/arch/x86/microcode.c | 296 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 269 insertions(+), 27 deletions(-)
xen/arch/x86/microcode.c +269 -27
@@ -30,18 +30,52 @@#include <xen/smp.h> #include <xen/softirq.h> #include <xen/spinlock.h> +#include <xen/stop_machine.h> #include <xen/tasklet.h> #include <xen/guest_access.h> #include <xen/earlycpio.h> +#include <xen/watchdog.h> +#include <asm/delay.h> #include <asm/msr.h> #include <asm/processor.h> #include <asm/setup.h> #include <asm/microcode.h> +/* +* Before performing a late microcode update on any thread, we +* rendezvous all cpus in stop_machine context. The timeout for +* waiting for cpu rendezvous is 30ms. It is the timeout used by +* live patching +*/ +#define MICROCODE_CALLIN_TIMEOUT_US 30000 + +/* +* Timeout for each thread to complete update is set to 1s. It is a +* conservative choice considering all possible interference. +*/ +#define MICROCODE_UPDATE_TIMEOUT_US 1000000 +static module_t __initdata ucode_mod;static signed int __initdata ucode_mod_idx;static bool_t __initdata ucode_mod_forced; +static unsigned int nr_cores; + +/* +* These states help to coordinate CPUs during loading an update. +* +* The semantics of each state is as follow: +* - LOADING_PREPARE: initial state of 'loading_state'. +* - LOADING_CALLIN: CPUs are allowed to callin. +* - LOADING_ENTER: all CPUs have called in. Initiate ucode loading. +* - LOADING_EXIT: ucode loading is done or aborted. +*/ +static enum { +LOADING_PREPARE , +LOADING_CALLIN , +LOADING_ENTER , +LOADING_EXIT , +} loading_state;/* * If we scan the initramfs.cpio for the early microcode code
@@ -190,6 +224,16 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig);/* +* Count the CPUs that have entered, exited the rendezvous and succeeded in +* microcode update during late microcode update respectively. +* +* Note that a bitmap is used for callin to allow cpu to set a bit multiple +* times. It is required to do busy-loop in #NMI handling. +*/ +static cpumask_t cpu_callin_map; +static atomic_t cpu_out, cpu_updated; + +/* * Return a patch that covers current CPU. If there are multiple patches, * return the one with the highest revision number. Return error If no * patch is found and an error occurs during the parsing process. Otherwise
@@ -231,6 +275,34 @@ static bool microcode_update_cache(struct microcode_patch *patch)return true; } +/* Wait for a condition to be met with a timeout (us). */ +static int wait_for_condition (bool (*func)(const void *data),void *data, +unsigned int timeout) +{ +while ( !func (data) ) + { +if ( !timeout-- ) + { +printk ("CPU%u: Timeout in %pS\n" , +smp_processor_id (),__builtin_return_address (0 )); +return -EBUSY ; + } +udelay (1 ); + } + +return 0 ; +} + +static bool wait_cpu_callin (const void *nr) +{ +return cpumask_weight (&cpu_callin_map) >= (unsigned long )nr; +} + +static bool wait_cpu_callout (const void *nr) +{ +return atomic_read (&cpu_out) >= (unsigned long )nr; +} +/* * Load a microcode update to current CPU. *
@@ -264,38 +336,158 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static bool wait_for_state (unsigned int state) +{ +while ( loading_state != state ) + { +if ( state !=LOADING_EXIT && loading_state ==LOADING_EXIT ) +return false; +cpu_relax (); + } + +return true; +} + +static void set_state (unsigned int state) +{ + loading_state = state; +smp_wmb (); +} + +static int secondary_thread_fn (void ) +{ +unsigned int primary =cpumask_first (this_cpu (cpu_sibling_mask)); + +if ( !wait_for_state (LOADING_CALLIN ) ) +return -EBUSY ; + +cpumask_set_cpu (smp_processor_id (), &cpu_callin_map); + +if ( !wait_for_state (LOADING_EXIT ) ) +return -EBUSY ; + +/* Copy update revision from the primary thread. */ +this_cpu (cpu_sig).rev =per_cpu (cpu_sig, primary).rev; + +return 0 ; +} + +static int primary_thread_fn (const struct microcode_patch *patch) +{ +int ret =0 ; + +if ( !wait_for_state (LOADING_CALLIN ) ) +return -EBUSY ; + +cpumask_set_cpu (smp_processor_id (), &cpu_callin_map); + +if ( !wait_for_state (LOADING_ENTER ) ) +return -EBUSY ; + + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) +atomic_inc (&cpu_updated); +atomic_inc (&cpu_out); + +return ret; +} + +static int control_thread_fn (const struct microcode_patch *patch) { -unsigned int cpu; -int ret =microcode_update_cpu (patch); +unsigned int cpu =smp_processor_id (), done; +unsigned long tick; +int ret; + +/* +* We intend to disable interrupt for long time, which may lead to +* watchdog timeout. +*/ +watchdog_disable (); -/* Store the patch after a successful loading */ -if ( !ret && patch ) +/* Allow threads to call in */ +set_state (LOADING_CALLIN ); + +cpumask_set_cpu (cpu, &cpu_callin_map); + +/* Waiting for all threads calling in */ + ret =wait_for_condition (wait_cpu_callin, + (void *)(unsigned long )num_online_cpus (), +MICROCODE_CALLIN_TIMEOUT_US ); +if ( ret ) { -spin_lock (µcode_mutex); -microcode_update_cache (patch); -spin_unlock (µcode_mutex); - patch =NULL ; +set_state (LOADING_EXIT ); +return ret; } -if ( microcode_ops->end_update_percpu ) - microcode_ops->end_update_percpu (); +/* Let primary threads load the given ucode update */ +set_state (LOADING_ENTER ); + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) +atomic_inc (&cpu_updated); +atomic_inc (&cpu_out); + + tick =rdtsc_ordered (); +/* Wait for primary threads finishing update */ + done =atomic_read (&cpu_out); +while ( done != nr_cores ) + { +/* +* During each timeout interval, at least a CPU is expected to +* finish its update. Otherwise, something goes wrong. +* +* Note that RDTSC (in wait_for_condition()) is safe for threads to +* execute while waiting for completion of loading an update. +*/ +if (wait_for_condition (wait_cpu_callout, + (void *)(unsigned long )(done +1 ), +MICROCODE_UPDATE_TIMEOUT_US ) ) +panic ("Timeout when finished updating microcode (finished %u/%u)" , + done, nr_cores); + +/* Print warning message once if long time is spent here */ +if ( tick &&rdtsc_ordered () - tick >= cpu_khz *1000 ) + { +printk (XENLOG_WARNING +"WARNING: UPDATING MICROCODE HAS CONSUMED MORE THAN 1 SECOND!\n" ); + tick =0 ; + } + done =atomic_read (&cpu_out); + } + +/* Mark loading is done to unblock other threads */ +set_state (LOADING_EXIT ); + +watchdog_enable (); + +return ret; +} + +static int do_microcode_update (void *patch) +{ +unsigned int cpu =smp_processor_id ();/* -* Each thread tries to load ucode and only the first thread of a core -* would succeed. Ignore error other than -EIO. +* primary thread is the one with the lowest thread id among all siblings +* thread in a core or a compute unit. It is chosen to load a microcode +* update. */ -if ( ret != -EIO ) - ret =0 ; +unsigned int primary =cpumask_first (this_cpu (cpu_sibling_mask)); +int ret; - cpu =cpumask_next (smp_processor_id (), &cpu_online_map); -if ( cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (cpu, do_microcode_update, patch) ? - : ret; +/* +* The control thread set state to coordinate ucode loading. Primary +* threads load the given ucode patch. Secondary threads just wait for +* the completion of the ucode loading process. +*/ +if ( cpu ==cpumask_first (&cpu_online_map) ) + ret =control_thread_fn (patch); +else if ( cpu == primary ) + ret =primary_thread_fn (patch); +else + ret =secondary_thread_fn (); -/* Free the patch if no CPU has loaded it successfully. */ -if ( patch ) -microcode_free_patch (patch); +if ( microcode_ops->end_update_percpu ) + microcode_ops->end_update_percpu ();return ret; }
@@ -304,6 +496,7 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) {int ret;void *buffer; +unsigned int cpu, updated;struct microcode_patch *patch;if ( len != (uint32_t )len )
@@ -322,18 +515,25 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) goto free; } +/* cpu_online_map must not change during update */ +if ( !get_cpu_maps () ) + { + ret = -EBUSY ; + goto free; + } + patch =parse_blob (buffer, len);if (IS_ERR (patch) ) { ret =PTR_ERR (patch);printk (XENLOG_WARNING "Parsing microcode blob error %d\n" , ret); - goto free; + goto put; }if ( !patch ) { ret = -ENOENT ; - goto free; + goto put; }if ( microcode_ops->start_update )
@@ -342,13 +542,55 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)if ( ret !=0 ) {microcode_free_patch (patch); - goto free; + goto put; } } - ret =continue_hypercall_on_cpu (cpumask_first (&cpu_online_map), - do_microcode_update, patch); +cpumask_clear (&cpu_callin_map); +atomic_set (&cpu_out,0 ); +atomic_set (&cpu_updated,0 ); + loading_state =LOADING_PREPARE ; + +/* Calculate the number of online CPU core */ + nr_cores =0 ; +for_each_online_cpu (cpu) +if ( cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu)) ) + nr_cores++; + +printk (XENLOG_INFO "%u cores are to update their microcode\n" , nr_cores); + +/* +* Late loading dance. Why the heavy-handed stop_machine effort? +* +* - HT siblings must be idle and not execute other code while the other +* sibling is loading microcode in order to avoid any negative +* interactions cause by the loading. +* +* - In addition, microcode update on the cores must be serialized until +* this requirement can be relaxed in the future. Right now, this is +* conservative and good. +*/ + ret =stop_machine_run (do_microcode_update, patch,NR_CPUS ); + + updated =atomic_read (&cpu_updated); +if ( updated >0 ) + { +spin_lock (µcode_mutex); +microcode_update_cache (patch); +spin_unlock (µcode_mutex); + } +else +microcode_free_patch (patch); + +if ( updated && updated != nr_cores ) +printk (XENLOG_ERR "ERROR: Updating microcode succeeded on %u cores and failed\n" +XENLOG_ERR "on other %u cores. A system with differing microcode\n" +XENLOG_ERR "revisions is considered unstable. Please reboot and do not\n" +XENLOG_ERR "load the microcode that triggers this warning!\n" , + updated, nr_cores - updated); + put: +put_cpu_maps (); free:xfree (buffer);return ret;
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 12/16] x86/microcode: Synchronize late microcode loading
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 344
Quoted 11 lines · Chao Gao
xen/arch/x86/microcode.c +6
-1@@ -264,38 +336,158 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static bool wait_for_state (unsigned int state) +{ +while ( loading_state != state ) + { +if ( state !=LOADING_EXIT && loading_state ==LOADING_EXIT ) +return false;
This is at least somewhat confusing: There's no indication here that "loading_state" may change behind the function's back. So in general one could be (and I initially was) tempted to suggest dropping the apparently redundant left side of the &&. But that would end up wrong if the compiler translates the above to two separate reads of "loading_state". Therefore I'd like to suggest
static bool wait_for_state(typeof(loading_state) state)
{
typeof(loading_state) cur_state;
while ( (cur_state = ACCESS_ONCE(loading_state)) != state )
{
if ( cur_state == LOADING_EXIT )
return false;
cpu_relax();
}
return true;
}or something substantially similar (if, e.g., you dislike the use of typeof() here).
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 367
Quoted 11 lines
xen/arch/x86/microcode.c +11
-0+static int secondary_thread_fn (void ) +{ +unsigned int primary =cpumask_first (this_cpu (cpu_sibling_mask)); + +if ( !wait_for_state (LOADING_CALLIN ) ) +return -EBUSY ; + +cpumask_set_cpu (smp_processor_id (), &cpu_callin_map); + +if ( !wait_for_state (LOADING_EXIT ) ) +return -EBUSY ;
This return looks to be unreachable, doesn't it?
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 405
Quoted 13 lines
xen/arch/x86/microcode.c +10
-2+static int control_thread_fn (const struct microcode_patch *patch) { -unsigned int cpu; -int ret =microcode_update_cpu (patch); +unsigned int cpu =smp_processor_id (), done; +unsigned long tick; +int ret; + +/* +* We intend to disable interrupt for long time, which may lead to +* watchdog timeout. +*/ +watchdog_disable ();
With the move here, the comment should start "We intend to keep interrupts disabled for a long time, ..." - they are disabled already at this point.
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 414
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-/* Store the patch after a successful loading */ -if ( !ret && patch ) +/* Allow threads to call in */ +set_state (LOADING_CALLIN ); + +cpumask_set_cpu (cpu, &cpu_callin_map); + +/* Waiting for all threads calling in */ + ret = wait_for_condition(wait_cpu_callin, + (void *)(unsigned long)num_online_cpus(),
I'm puzzled by my own suggestion in reply to v9, and I'm equally puzzled that you didn't take it that little step further: All of this casting would be unnecessary if the two wait_cpu_*() functions took "unsigned int" as their parameters. (The observation with v9 was that both are similar enough to allow for a common signature, even if that signature would not be a typical one for a callback.)
Quoted 14 lines
xen/arch/x86/microcode.c +5
-6+ MICROCODE_CALLIN_TIMEOUT_US); +if ( ret ) { -spin_lock (µcode_mutex); -microcode_update_cache (patch); -spin_unlock (µcode_mutex); - patch =NULL ; +set_state (LOADING_EXIT ); +return ret; } -if ( microcode_ops->end_update_percpu ) - microcode_ops->end_update_percpu (); +/* Let primary threads load the given ucode update */
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 432
Quoted 10 lines
xen/arch/x86/microcode.c +9
-0+set_state (LOADING_ENTER ); + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) +atomic_inc (&cpu_updated); +atomic_inc (&cpu_out); + + tick =rdtsc_ordered (); +/* Wait for primary threads finishing update */ + done =atomic_read (&cpu_out);
Would you mind eliminating the duplication of this and ...
Quoted 13 lines
xen/arch/x86/microcode.c +13
-0+while ( done != nr_cores ) + { +/* +* During each timeout interval, at least a CPU is expected to +* finish its update. Otherwise, something goes wrong. +* +* Note that RDTSC (in wait_for_condition()) is safe for threads to +* execute while waiting for completion of loading an update. +*/ +if (wait_for_condition (wait_cpu_callout, + (void *)(unsigned long )(done +1 ), +MICROCODE_UPDATE_TIMEOUT_US ) ) + panic("Timeout when finished updating microcode (finished %u/%u)",
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 455
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+ done, nr_cores); + +/* Print warning message once if long time is spent here */ +if ( tick &&rdtsc_ordered () - tick >= cpu_khz *1000 ) + { +printk (XENLOG_WARNING +"WARNING: UPDATING MICROCODE HAS CONSUMED MORE THAN 1 SECOND!\n" ); + tick =0 ; + } + done =atomic_read (&cpu_out);
... this, by doing the assignment inside the while()?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 12/16] x86/microcode: Synchronize late microcode loading
Quoted 34 lines · Jan Beulich
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 344
Quoted 11 lines · Chao Gao
xen/arch/x86/microcode.c +6
-1@@ -264,38 +336,158 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static bool wait_for_state (unsigned int state) +{ +while ( loading_state != state ) + { +if ( state !=LOADING_EXIT && loading_state ==LOADING_EXIT ) +return false;This is at least somewhat confusing: There's no indication here that "
loading_state" may change behind the function's back. So in general one could be (and I initially was) tempted to suggest dropping the apparently redundant left side of the &&. But that would end up wrong if the compiler translates the above to two separate reads of "loading_state". Therefore I'd like to suggeststatic bool
wait_for_state(typeof(loading_state) state){ typeof(loading_state) cur_state; while ( (cur_state = ACCESS_ONCE(loading_state)) != state ) { if ( cur_state == LOADING_EXIT ) return false; cpu_relax(); } return true; }
Quoted 2 lines
or something substantially similar (if, e.g., you dislike the use of
typeof()here).
The code snippet above is terrific. Will take it.
Quoted 14 lines
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 367
Quoted 12 lines
xen/arch/x86/microcode.c +11
-0+static int secondary_thread_fn (void ) +{ +unsigned int primary =cpumask_first (this_cpu (cpu_sibling_mask)); + +if ( !wait_for_state (LOADING_CALLIN ) ) +return -EBUSY ; + +cpumask_set_cpu (smp_processor_id (), &cpu_callin_map); + +if ( !wait_for_state (LOADING_EXIT ) ) +return -EBUSY ;This return looks to be unreachable, doesn't it?
Yes. I will use a variable to hold its return value and assert the return value is always true.
Other comments are reasonable and I will follow your suggestion.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 12/16] x86/microcode: Synchronize late microcode loading
Quoted 16 lines · Chao Gao
Quoted 14 lines · Jan Beulich
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 367
Quoted 11 lines · Chao Gao
xen/arch/x86/microcode.c +11
-0+static int secondary_thread_fn (void ) +{ +unsigned int primary =cpumask_first (this_cpu (cpu_sibling_mask)); + +if ( !wait_for_state (LOADING_CALLIN ) ) +return -EBUSY ; + +cpumask_set_cpu (smp_processor_id (), &cpu_callin_map); + +if ( !wait_for_state (LOADING_EXIT ) ) +return -EBUSY ;This return looks to be unreachable, doesn't it?
Quoted 2 lines
Yes. I will use a variable to hold its return value and assert the return value is always true.
Or simply add ASSERT_UNREACHABLE() to the if()'s body?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 13/16 microcode: remove microcode_update_lock
In reply to Chao Gaomicrocode_update_lock is to prevent logic threads of a same core from updating microcode at the same time. But due to using a global lock, it also prevented parallel microcode updating on different cores.
Remove this lock in order to update microcode in parallel. It is safe because we have already ensured serialization of sibling threads at the caller side.
1.For late microcode update, do_microcode_update() ensures that only one
sibiling thread of a core can update microcode.
2.For microcode update during system startup or CPU-hotplug,
microcode_mutex() guarantees update serialization of logical threads.
3.get/put_cpu_bitmaps() prevents the concurrency of CPU-hotplug and
late microcode update.
Note that printk in apply_microcode() and svm_host_osvm_init() (for AMD only) are still processed sequentially.
---
Changes in v7:
- reworked. Remove complex lock logics introduced in v5 and v6. The microcode patch to be applied is passed as an argument without any global variable. Thus no lock is added to serialize potential readers/writers. Callers of apply_microcode() will guarantee the correctness: the patch poninted by the arguments won't be changed by others.
Changes in v6:
- introduce early_ucode_update_lock to serialize early ucode update.
Changes in v5:
- newly add
--- xen/arch/x86/microcode_amd.c | 8 +------- xen/arch/x86/microcode_intel.c | 8 +------- 2 files changed, 2 insertions(+), 14 deletions(-)
xen/arch/x86/microcode_amd.c +1 -7
@@ -74,9 +74,6 @@ struct mpbhdr {uint8_t data[]; }; -/* serialize access to the physical write */ -static DEFINE_SPINLOCK (microcode_update_lock); -/* See comment in start_update() for cases when this routine fails */ static int collect_cpu_info (struct cpu_signature *csig) {
@@ -232,7 +229,6 @@ static enum microcode_match_result compare_patch(static int apply_microcode (const struct microcode_patch *patch) { -unsigned long flags;uint32_t rev;int hw_err;unsigned int cpu =smp_processor_id ();
@@ -247,15 +243,13 @@ static int apply_microcode(const struct microcode_patch *patch) hdr = patch->mc_amd->mpb; -spin_lock_irqsave (µcode_update_lock, flags); +BUG_ON (local_irq_is_enabled ()); hw_err =wrmsr_safe (MSR_AMD_PATCHLOADER , (unsigned long )hdr);/* get patch id after patching */ rdmsrl (MSR_AMD_PATCHLEVEL , rev); -spin_unlock_irqrestore (µcode_update_lock, flags); -/* * Some processors leave the ucode blob mapping as UC after the update. * Flush the mapping to regain normal cacheability.
xen/arch/x86/microcode_intel.c +1 -7
@@ -93,9 +93,6 @@ struct extended_sigtable {#define exttable_size (et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) -/* serialize access to the physical write to MSR 0x79 */ -static DEFINE_SPINLOCK (microcode_update_lock); -static int collect_cpu_info (struct cpu_signature *csig) {unsigned int cpu_num =smp_processor_id ();
@@ -288,7 +285,6 @@ static enum microcode_match_result compare_patch(static int apply_microcode (const struct microcode_patch *patch) { -unsigned long flags;uint64_t msr_content;unsigned int val[2 ];unsigned int cpu_num =raw_smp_processor_id ();
@@ -303,8 +299,7 @@ static int apply_microcode(const struct microcode_patch *patch) mc_intel = patch->mc_intel; -/* serialize access to the physical write to MSR 0x79 */ -spin_lock_irqsave (µcode_update_lock, flags); +BUG_ON (local_irq_is_enabled ());/* write microcode via MSR 0x79 */ wrmsrl (MSR_IA32_UCODE_WRITE , (unsigned long )mc_intel->bits);
@@ -317,7 +312,6 @@ static int apply_microcode(const struct microcode_patch *patch)rdmsrl (MSR_IA32_UCODE_REV , msr_content); val[1 ] = (uint32_t )(msr_content >>32 ); -spin_unlock_irqrestore (µcode_update_lock, flags);if ( val[1 ] != mc_intel->hdr.rev ) { printk(KERN_ERR "microcode: CPU%d update from revision "
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 14/16 microcode: rendezvous CPUs in NMI handler and load ucode
In reply to Chao GaoWhen one core is loading ucode, handling NMI on sibling threads or on other cores in the system might be problematic. By rendezvousing all CPUs in NMI handler, it prevents NMI acceptance during ucode loading.
Basically, some work previously done in stop_machine context is moved to NMI handler. Primary threads call in and load ucode in NMI handler. Secondary threads wait for the completion of ucode loading on all CPU cores. An option is introduced to disable this behavior.
---
Changes in v10:
- rewrite based on Sergey's idea and patch
- add Sergey's SOB.
- add an option to disable ucode loading in NMI handler
- don't send IPI NMI to the control thread to avoid unknown_nmi_error() in do_nmi().
- add an assertion to make sure the cpu chosen to handle platform NMI won't send self NMI. Otherwise, there is a risk that we encounter unknown_nmi_error() and system crashes.
Changes in v9:
- control threads send NMI to all other threads. Slave threads will stay in the NMI handling to prevent NMI acceptance during ucode loading. Note that self-nmi is invalid according to SDM.
- s/rep_nop/cpu_relax
- remove debug message in microcode_nmi_callback(). Printing debug message would take long times and control thread may timeout.
- rebase and fix conflicts
Changes in v8:
- new
--- docs/misc/xen-command-line.pandoc | 10 +++++ xen/arch/x86/microcode.c | 95 ++++++++++++++++++++++++++++++++------- xen/arch/x86/traps.c | 6 ++- xen/include/asm-x86/nmi.h | 3 ++ 4 files changed, 96 insertions(+), 18 deletions(-)
docs/misc/xen-command-line.pandoc +10 -0
@@ -2056,6 +2056,16 @@ microcode in the cpio name space must be: - on Intel: kernel/x86/microcode/GenuineIntel.bin - on AMD : kernel/x86/microcode/AuthenticAMD.bin +### ucode_loading_in_nmi (x86) +> `= <boolean>` + +> Default: `true` + +When one CPU is loading ucode, handling NMIs on sibling threads or threads on +other cores might cause problems. By default, all CPUs rendezvous in NMI handler +and load ucode. This option provides a way to disable it in case of some CPUs +don't allow ucode loading in NMI handler. + ### unrestricted_guest (Intel) > `= <boolean>`
xen/arch/x86/microcode.c +79 -16
168 lines not on this page · raw message
xen/arch/x86/traps.c +4 -2
@@ -126,6 +126,8 @@ boolean_param("ler", opt_ler);/* LastExceptionFromIP on this hardware. Zero if LER is not in use. */ unsigned int __read_mostly ler_msr; +unsigned int __read_mostly nmi_cpu; +#define stack_words_per_line 4#define ESP_BEFORE_EXCEPTION (regs) ((unsigned long *)regs->rsp)
@@ -1679,7 +1681,7 @@ void do_nmi(const struct cpu_user_regs *regs)* this port before we re-arm the NMI watchdog, we reduce the chance * of having an NMI watchdog expire while in the SMI handler. */ -if ( cpu ==0 ) +if ( cpu == nmi_cpu ) reason =inb (0x61 ); if ( (nmi_watchdog == NMI_NONE) ||
@@ -1687,7 +1689,7 @@ void do_nmi(const struct cpu_user_regs *regs) handle_unknown = true;/* Only the BSP gets external NMIs from the system. */ -if ( cpu ==0 ) +if ( cpu == nmi_cpu ) {if ( reason &0x80 )pci_serr_error (regs);
xen/include/asm-x86/nmi.h +3 -0
@@ -11,6 +11,9 @@ extern bool opt_watchdog;/* Watchdog force parameter from the command line */ extern bool watchdog_force; + +/* CPU to handle platform NMI */ +extern unsigned int nmi_cpu;typedef int nmi_callback_t (const struct cpu_user_regs *regs,int cpu);
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 14/16] microcode: rendezvous CPUs in NMI handler and load ucode
Quoted 21 lines · Chao Gao
When one core is loading ucode, handling NMI on sibling threads or on other cores in the system might be problematic. By rendezvousing all CPUs in NMI handler, it prevents NMI acceptance during ucode loading.
Basically, some work previously done in
stop_machinecontext is moved to NMI handler. Primary threads call in and load ucode in NMI handler. Secondary threads wait for the completion of ucode loading on all CPU cores. An option is introduced to disable this behavior.Signed-off-by Chao Gao <[email protected]>Signed-off-by Sergey Dyasli <[email protected]>docs/misc/xen-command-line.pandoc +0
-0@@ -2056,6 +2056,16 @@ microcode in the cpio name space must be: - on Intel: kernel/x86/microcode/GenuineIntel.bin - on AMD : kernel/x86/microcode/AuthenticAMD.bin
docs/misc/xen-command-line.pandoc microcode in the cpio name space must be: · line 2067
Quoted 10 lines
docs/misc/xen-command-line.pandoc +9
-0+### ucode_loading_in_nmi (x86) +> `= <boolean>` + +> Default: `true` + +When one CPU is loading ucode, handling NMIs on sibling threads or threads on +other cores might cause problems. By default, all CPUs rendezvous in NMI handler +and load ucode. This option provides a way to disable it in case of some CPUs +don't allow ucode loading in NMI handler.
We already have "ucode=", why don't you extend it to allow "ucode=nmi" and "ucode=no-nmi"? (In any event, please no underscores in new command line options - use hyphens if necessary.)
docs/misc/xen-command-line.pandoc DEFINE_PER_CPU(struct cpu_signature, cpu_sig); · line 240
Quoted 5 lines
docs/misc/xen-command-line.pandoc +1
-0@@ -232,6 +237,7 @@ DEFINE_PER_CPU(struct cpu_signature, cpu_sig); */ static cpumask_t cpu_callin_map; static atomic_t cpu_out, cpu_updated; +const struct microcode_patch *nmi_patch;
static
docs/misc/xen-command-line.pandoc static void set_state(unsigned int state) · line 370
Quoted 12 lines
docs/misc/xen-command-line.pandoc +8
-0@@ -354,6 +360,50 @@ static void set_state(unsigned int state) smp_wmb(); } +static int secondary_thread_work(void) +{ + cpumask_set_cpu(smp_processor_id(), &cpu_callin_map); + + return wait_for_state(LOADING_EXIT) ? 0 : -EBUSY; +} + +static int primary_thread_work(const struct microcode_patch *patch)
I think it would be nice if both functions carried "nmi" in their names - how about {primary,secondary}_nmi_work()? Or wait - the primary one gets used outside of NMI as well, so I'm fine with its name. The secondary one, otoh, is NMI-specific and also its only caller doesn't care about the return value, so I'd suggest making it return void alongside adding some form of "nmi" to its name. Or, perhaps even better, have secondary_thread_fn() call it, moving the cpu_sig update here (and of course then there shouldn't be any "nmi" added to its name).
docs/misc/xen-command-line.pandoc static void set_state(unsigned int state) · line 378
Quoted 8 lines
docs/misc/xen-command-line.pandoc +8
-0+static int microcode_nmi_callback(const struct cpu_user_regs *regs, int cpu) +{ + unsigned int primary = cpumask_first(this_cpu(cpu_sibling_mask)); + unsigned int controller = cpumask_first(&cpu_online_map); + + /* System-generated NMI, will be ignored */ + if ( loading_state != LOADING_CALLIN ) + return 0;
I'm not happy at all to see NMIs being ignored. But by returning zero, you do _not_ ignore it. Did you perhaps mean "will be ignored here", in which case perhaps better "leave to main handler"? And for the comment to extend to the other two conditions right below, I think it would be better to combine them all into a single if().
Also, throughout the series, I think you want to consistently use ACCESS_ONCE() for reads/writes from/to loading_state.
docs/misc/xen-command-line.pandoc static void set_state(unsigned int state) · line 380
Quoted 2 lines
docs/misc/xen-command-line.pandoc +2
-0+ if ( cpu == controller || (!opt_ucode_loading_in_nmi && cpu == primary) ) + return 0;
Why not
if ( cpu == controller || !opt_ucode_loading_in_nmi )
return 0;? (And then, there being just a single use each in this function, I don't think there's a need for the two local variables.)
docs/misc/xen-command-line.pandoc static int secondary_thread_fn(void) · line 414
Quoted 9 lines
docs/misc/xen-command-line.pandoc +1
-4@@ -361,10 +411,7 @@ static int secondary_thread_fn(void) if ( !wait_for_state(LOADING_CALLIN) ) return -EBUSY; - cpumask_set_cpu(smp_processor_id(), &cpu_callin_map); - - if ( !wait_for_state(LOADING_EXIT) ) - return -EBUSY; + self_nmi();
Loosing the -EBUSY indication here isn't very nice. Perhaps this should be conveyed via a per-CPU variable?
Quoted 5 lines
docs/misc/xen-command-line.pandoc +0
-1@@ -379,15 +426,10 @@ static int primary_thread_fn(const struct microcode_patch *patch) if ( !wait_for_state(LOADING_CALLIN) ) return -EBUSY; - cpumask_set_cpu(smp_processor_id(), &cpu_callin_map);
docs/misc/xen-command-line.pandoc static int primary_thread_fn(const struct microcode_patch *patch) · line 430
Quoted 10 lines
docs/misc/xen-command-line.pandoc +2
-8- - if ( !wait_for_state(LOADING_ENTER) ) - return -EBUSY; - - ret = microcode_ops->apply_microcode(patch); - if ( !ret ) - atomic_inc(&cpu_updated); - atomic_inc(&cpu_out); + if ( opt_ucode_loading_in_nmi ) + self_nmi();
Same here.
docs/misc/xen-command-line.pandoc static int control_thread_fn(const struct microcode_patch *patch) · line 451
Quoted 6 lines
docs/misc/xen-command-line.pandoc +2
-0@@ -404,6 +447,9 @@ static int control_thread_fn(const struct microcode_patch *patch) */ watchdog_disable(); + nmi_patch = patch; + saved_nmi_callback = set_nmi_callback(microcode_nmi_callback);
Shouldn't there be smb_wmb() between these two?
docs/misc/xen-command-line.pandoc static int control_thread_fn(const struct microcode_patch *patch) · line 516
Quoted 5 lines
docs/misc/xen-command-line.pandoc +1
-0@@ -458,6 +513,7 @@ static int control_thread_fn(const struct microcode_patch *patch) /* Mark loading is done to unblock other threads */ set_state(LOADING_EXIT); + set_nmi_callback(saved_nmi_callback);
To be on the safe side, I think you also want to clear nmi_patch again. Or maybe even better not clear it, but set it to a non-NULL value which, when accessed, would trap (e.g. ZERO_BLOCK_PTR). This value should then also be the variable's initializer.
docs/misc/xen-command-line.pandoc int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) · line 586
Quoted 10 lines
docs/misc/xen-command-line.pandoc +6
-0@@ -522,6 +578,13 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) goto free; } + /* + * CPUs except the first online CPU would send a fake (self) NMI to + * rendezvous in NMI handler. But a fake NMI to nmi_cpu may trigger + * unknown_nmi_error(). It ensures nmi_cpu won't receive a fake NMI. + */ + ASSERT( !cpu_online(nmi_cpu) || nmi_cpu == cpumask_first(&cpu_online_map) );
Please drop the blanks immediately inside the parentheses.
As to the left side of the || - is this really needed? It surely would be very wrong (but entirely unrelated to ucode loading) if the CPU to receive platform NMIs was offline.
xen/arch/x86/traps.c boolean_param("ler", opt_ler); · line 129
Quoted 7 lines
xen/arch/x86/traps.c +1
-0@@ -126,6 +126,8 @@ boolean_param("ler", opt_ler);/* LastExceptionFromIP on this hardware. Zero if LER is not in use. */ unsigned int __read_mostly ler_msr; +unsigned int __read_mostly nmi_cpu;
Since this variable (for now) is never written to it should gain a comment saying why this is, and perhaps it would then also better be const rather than __read_mostly.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 14/16] microcode: rendezvous CPUs in NMI handler and load ucode
Quoted 23 lines · Jan Beulich
Quoted 22 lines · Chao Gao
When one core is loading ucode, handling NMI on sibling threads or on other cores in the system might be problematic. By rendezvousing all CPUs in NMI handler, it prevents NMI acceptance during ucode loading.
Basically, some work previously done in
stop_machinecontext is moved to NMI handler. Primary threads call in and load ucode in NMI handler. Secondary threads wait for the completion of ucode loading on all CPU cores. An option is introduced to disable this behavior.Signed-off-by Chao Gao <[email protected]>Signed-off-by Sergey Dyasli <[email protected]>docs/misc/xen-command-line.pandoc +0
-0@@ -2056,6 +2056,16 @@ microcode in the cpio name space must be: - on Intel: kernel/x86/microcode/GenuineIntel.bin - on AMD : kernel/x86/microcode/AuthenticAMD.bin
Quoted 13 lines
docs/misc/xen-command-line.pandoc microcode in the cpio name space must be: · line 2067
Quoted 9 lines
docs/misc/xen-command-line.pandoc +9
-0+### ucode_loading_in_nmi (x86) +> `= <boolean>` + +> Default: `true` + +When one CPU is loading ucode, handling NMIs on sibling threads or threads on +other cores might cause problems. By default, all CPUs rendezvous in NMI handler +and load ucode. This option provides a way to disable it in case of some CPUs +don't allow ucode loading in NMI handler.We already have "ucode=", why don't you extend it to allow "ucode=nmi" and "ucode=no-nmi"? (In any event, please no underscores in new command line options - use hyphens if necessary.)
Ok. Will extend the "ucode" parameter.
Quoted 13 lines
docs/misc/xen-command-line.pandoc DEFINE_PER_CPU(struct cpu_signature, cpu_sig); · line 240
Quoted 6 lines
docs/misc/xen-command-line.pandoc +1
-0@@ -232,6 +237,7 @@ DEFINE_PER_CPU(struct cpu_signature, cpu_sig); */ static cpumask_t cpu_callin_map; static atomic_t cpu_out, cpu_updated; +const struct microcode_patch *nmi_patch;static
Quoted 4 lines
docs/misc/xen-command-line.pandoc +0
-0@@ -354,6 +360,50 @@ static void set_state(unsigned int state) smp_wmb(); }
Quoted 16 lines
docs/misc/xen-command-line.pandoc static void set_state(unsigned int state) · line 370
Quoted 8 lines
docs/misc/xen-command-line.pandoc +8
-0+static int secondary_thread_work(void) +{ + cpumask_set_cpu(smp_processor_id(), &cpu_callin_map); + + return wait_for_state(LOADING_EXIT) ? 0 : -EBUSY; +} + +static int primary_thread_work(const struct microcode_patch *patch)I think it would be nice if both functions carried "nmi" in their names - how about {primary,secondary}_nmi_work()? Or wait - the primary one gets used outside of NMI as well, so I'm fine with its name.
The secondary one, otoh, is NMI-specific and also its only caller doesn't care about the return value, so I'd suggest making it return void alongside adding some form of "nmi" to its name. Or,
Will do.
Quoted 3 lines
perhaps even better, have
secondary_thread_fn()call it, moving thecpu_sigupdate here (and of course then there shouldn't be any "nmi" added to its name).
Even with "ucode=no-nmi", secondary threads have to do busy-loop in NMI handling util primary threads completing the update. Otherwise, it may access MSRs (like SPEC_CTRL) which is considered unsafe.
Quoted 16 lines
docs/misc/xen-command-line.pandoc static void set_state(unsigned int state) · line 378
Quoted 9 lines
docs/misc/xen-command-line.pandoc +8
-0+static int microcode_nmi_callback(const struct cpu_user_regs *regs, int cpu) +{ + unsigned int primary = cpumask_first(this_cpu(cpu_sibling_mask)); + unsigned int controller = cpumask_first(&cpu_online_map); + + /* System-generated NMI, will be ignored */ + if ( loading_state != LOADING_CALLIN ) + return 0;I'm not happy at all to see NMIs being ignored. But by returning zero, you do _not_ ignore it. Did you perhaps mean "will be ignored here", in which case perhaps better "leave to main handler"? And for the comment to extend to the other two conditions right below, I think it would be better to combine them all into a single
if().
Quoted 7 lines
Also, throughout the series, I think you want to consistently use
ACCESS_ONCE()for reads/writes from/toloading_state.docs/misc/xen-command-line.pandoc static void set_state(unsigned int state) · line 380
Quoted 2 lines
docs/misc/xen-command-line.pandoc +2
-0+ if ( cpu == controller || (!opt_ucode_loading_in_nmi && cpu == primary) ) + return 0;Why not
As I said above, secondary threads are expected to stay in NMI handler regardless the setting of opt_ucode_loading_in_nmi.
Quoted 11 lines
xen/arch/x86/traps.c boolean_param("ler", opt_ler); · line 129
Quoted 7 lines
xen/arch/x86/traps.c +1
-0@@ -126,6 +126,8 @@ boolean_param("ler", opt_ler);/* LastExceptionFromIP on this hardware. Zero if LER is not in use. */ unsigned int __read_mostly ler_msr; +unsigned int __read_mostly nmi_cpu;Since this variable (for now) is never written to it should gain a comment saying why this is, and perhaps it would then also better be const rather than
__read_mostly.
How about use the macro below:
#define NMI_CPU 0
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 14/16] microcode: rendezvous CPUs in NMI handler and load ucode
Quoted 25 lines · Chao Gao
Quoted 5 lines · Jan Beulich
Quoted 4 lines · Chao Gao
xen/arch/x86/microcode.c +0
-0@@ -354,6 +360,50 @@ static void set_state(unsigned int state)smp_wmb (); }Quoted 16 lines
xen/arch/x86/microcode.c static void set_state(unsigned int state) · line 370
Quoted 8 lines
xen/arch/x86/microcode.c +8
-0+static int secondary_thread_work (void ) +{ +cpumask_set_cpu (smp_processor_id (), &cpu_callin_map); + +return wait_for_state (LOADING_EXIT ) ?0 : -EBUSY ; +} + +static int primary_thread_work (const struct microcode_patch *patch)I think it would be nice if both functions carried "nmi" in their names - how about {primary,secondary}_nmi_work()? Or wait - the primary one gets used outside of NMI as well, so I'm fine with its name.
The secondary one, otoh, is NMI-specific and also its only caller doesn't care about the return value, so I'd suggest making it return void alongside adding some form of "nmi" to its name. Or,Will do.
Quoted 7 lines
Quoted 3 lines
perhaps even better, have
secondary_thread_fn()call it, moving thecpu_sigupdate here (and of course then there shouldn't be any "nmi" added to its name).Even with "ucode=no-nmi", secondary threads have to do busy-loop in NMI handling util primary threads completing the update. Otherwise, it may access MSRs (like
SPEC_CTRL) which is considered unsafe.
Of course. Note that I said "call it"; I did not suggest to replace secondary_thread_fn().
Quoted 18 lines
Quoted 18 lines
xen/arch/x86/microcode.c static void set_state(unsigned int state) · line 394
Quoted 8 lines
xen/arch/x86/microcode.c +8
-0+static int microcode_nmi_callback (const struct cpu_user_regs *regs,int cpu) +{ +unsigned int primary =cpumask_first (this_cpu (cpu_sibling_mask)); +unsigned int controller =cpumask_first (&cpu_online_map); + +/* System-generated NMI, will be ignored */ +if ( loading_state !=LOADING_CALLIN ) +return 0 ;I'm not happy at all to see NMIs being ignored. But by returning zero, you do _not_ ignore it. Did you perhaps mean "will be ignored here", in which case perhaps better "leave to main handler"? And for the comment to extend to the other two conditions right below, I think it would be better to combine them all into a single
if().Also, throughout the series, I think you want to consistently use
ACCESS_ONCE()for reads/writes from/toloading_state.
Quoted 7 lines
Quoted 4 lines
Review static void set_state(unsigned int state) · line 380
Quoted 2 lines
(quoted diff) +2
-0+ if ( cpu == controller || (!opt_ucode_loading_in_nmi && cpu == primary) ) + return 0;Why not
As I said above, secondary threads are expected to stay in NMI handler regardless the setting of
opt_ucode_loading_in_nmi.
Oh, here I see how your remark above matters. Please add code comments then to make this clear to the reader.
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
xen/arch/x86/traps.c +0
-0@@ -126,6 +126,8 @@ boolean_param("ler", opt_ler);/* LastExceptionFromIP on this hardware. Zero if LER is not in use. */ unsigned int __read_mostly ler_msr;
Quoted 8 lines
Quoted 5 lines
xen/arch/x86/traps.c boolean_param("ler", opt_ler); · line 129
Quoted 1 line
xen/arch/x86/traps.c +1
-0+unsigned int __read_mostly nmi_cpu;Since this variable (for now) is never written to it should gain a comment saying why this is, and perhaps it would then also better be const rather than
__read_mostly.How about use the macro below:
#defineNMI_CPU0
This is another option, yes. If there's any intention to ever allow offlining CPU 0, then having the variable in place would seem better to me. But I'll leave it to you at this point.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 14/16] microcode: rendezvous CPUs in NMI handler and load ucode
In reply to Chao GaoQuoted 13 lines · Chao Gao
xen/arch/x86/microcode.c +1
-3@@ -419,14 +465,23 @@ static int control_thread_fn(const struct microcode_patch *patch)return ret; } -/* Let primary threads load the given ucode update */ -set_state (LOADING_ENTER ); - +/* Control thread loads ucode first while others are in NMI handler. */ ret = microcode_ops->apply_microcode (patch);if ( !ret )atomic_inc (&cpu_updated);atomic_inc (&cpu_out);
xen/arch/x86/microcode.c static int control_thread_fn(const struct microcode_patch *patch) · line 483
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+if ( ret == -EIO ) + { +printk (XENLOG_ERR +"Late loading aborted: CPU%u failed to update ucode\n" , cpu); +set_state (LOADING_EXIT ); +return ret; + } + +/* Let primary threads load the given ucode update */ +set_state (LOADING_ENTER );
One more question - why this deferral of setting state to ENTER? If it's needed, it should be explained in the description.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 15/16 microcode: disable late loading if CPUs are affected by BDF90
In reply to Chao GaoIt ports the implementation of is_blacklisted() in linux kernel to Xen.
Late loading may cause system hang if CPUs are affected by BDF90. Check against BDF90 before performing a late loading.
--- xen/arch/x86/microcode.c | 6 ++++++ xen/arch/x86/microcode_intel.c | 23 +++++++++++++++++++++++ xen/include/asm-x86/microcode.h | 1 + 3 files changed, 30 insertions(+)
xen/arch/x86/microcode.c +6 -0
@@ -561,6 +561,12 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)if ( microcode_ops ==NULL )return -EINVAL ; +if ( microcode_ops->is_blacklisted && microcode_ops->is_blacklisted () ) + { +printk (XENLOG_WARNING "Late ucode loading is disabled!\n" ); +return -EPERM ; + } + buffer =xmalloc_bytes (len);if ( !buffer )return -ENOMEM ;
xen/arch/x86/microcode_intel.c +23 -0
@@ -28,6 +28,7 @@#include <xen/smp.h> #include <xen/spinlock.h> +#include <asm/div64.h> #include <asm/msr.h> #include <asm/processor.h> #include <asm/microcode.h>
@@ -283,6 +284,27 @@ static enum microcode_match_result compare_patch( : OLD_UCODE; } +static bool is_blacklisted (void ) +{ +struct cpuinfo_x86 *c = ¤t_cpu_data; +uint64_t llc_size = c->x86_cache_size *1024ULL ; +struct cpu_signature *sig = &this_cpu (cpu_sig); + +do_div (llc_size, c->x86_max_cores); + +/* +* Late loading on model 79 with microcode revision less than 0x0b000021 +* and LLC size per core bigger than 2.5MB may result in a system hang. +* This behavior is documented in item BDF90, #334165 (Intel Xeon +* Processor E7-8800/4800 v4 Product Family). +*/ +if ( c->x86 ==6 && c->x86_model ==0x4F && c->x86_mask ==0x1 && + llc_size >2621440 && sig->rev <0x0b000021 ) +return true; + +return false; +} +static int apply_microcode (const struct microcode_patch *patch) {uint64_t msr_content;
@@ -415,6 +437,7 @@ static const struct microcode_ops microcode_intel_ops = { .free_patch = free_patch, .compare_patch = compare_patch, .match_cpu = match_cpu, + .is_blacklisted = is_blacklisted, };int __init microcode_init_intel (void )
xen/include/asm-x86/microcode.h +1 -0
@@ -30,6 +30,7 @@ struct microcode_ops {bool (*match_cpu)(const struct microcode_patch *patch);enum microcode_match_result (*compare_patch)(const struct microcode_patch *new,const struct microcode_patch *old); +bool (*is_blacklisted)(void ); };struct cpu_signature {
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 15/16] microcode: disable late loading if CPUs are affected by BDF90
Quoted 14 lines · Chao Gao
xen/arch/x86/microcode_intel.c +10
-0@@ -283,6 +284,27 @@ static enum microcode_match_result compare_patch( : OLD_UCODE; } +static bool is_blacklisted (void ) +{ +struct cpuinfo_x86 *c = ¤t_cpu_data; +uint64_t llc_size = c->x86_cache_size *1024ULL ; +struct cpu_signature *sig = &this_cpu (cpu_sig); + +do_div (llc_size, c->x86_max_cores); + +/* +* Late loading on model 79 with microcode revision less than 0x0b000021
xen/arch/x86/microcode_intel.c static enum microcode_match_result compare_patch( · line 306
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+* and LLC size per core bigger than 2.5MB may result in a system hang. +* This behavior is documented in item BDF90, #334165 (Intel Xeon +* Processor E7-8800/4800 v4 Product Family). +*/ +if ( c->x86 ==6 && c->x86_model ==0x4F && c->x86_mask ==0x1 && + llc_size >2621440 && sig->rev <0x0b000021 ) +return true; + +return false; +}
Isn't this misbehavior worked around by the wbinvd() you add in the next patch?
xen/include/asm-x86/microcode.h struct microcode_ops { · line 33
Quoted 7 lines
xen/include/asm-x86/microcode.h +1
-0@@ -30,6 +30,7 @@ struct microcode_ops {bool (*match_cpu)(const struct microcode_patch *patch);enum microcode_match_result (*compare_patch)(const struct microcode_patch *new,const struct microcode_patch *old); +bool (*is_blacklisted)(void );
Why a hook rather than a boolean flag, which could be set by microcode_update_one() (as invoked during AP bringup)?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 15/16] microcode: disable late loading if CPUs are affected by BDF90
Quoted 20 lines · Jan Beulich
Quoted 19 lines · Chao Gao
xen/arch/x86/microcode_intel.c +15
-0@@ -283,6 +284,27 @@ static enum microcode_match_result compare_patch( : OLD_UCODE; } +static bool is_blacklisted (void ) +{ +struct cpuinfo_x86 *c = ¤t_cpu_data; +uint64_t llc_size = c->x86_cache_size *1024ULL ; +struct cpu_signature *sig = &this_cpu (cpu_sig); + +do_div (llc_size, c->x86_max_cores); + +/* +* Late loading on model 79 with microcode revision less than 0x0b000021 +* and LLC size per core bigger than 2.5MB may result in a system hang. +* This behavior is documented in item BDF90, #334165 (Intel Xeon +* Processor E7-8800/4800 v4 Product Family). +*/ + if ( c->x86 == 6 && c->x86_model == 0x4F && c->x86_mask == 0x1 &&
Quoted 8 lines
xen/arch/x86/microcode_intel.c static enum microcode_match_result compare_patch( · line 306
Quoted 5 lines
xen/arch/x86/microcode_intel.c +5
-0+ llc_size > 2621440 && sig->rev < 0x0b000021 ) +return true; + +return false; +}Isn't this misbehavior worked around by the
wbinvd()you add in the next patch?
Hi Jan and Andrew,
Perhaps I misunderstood what I was told. I am confirming with Ashok whether this patch is necessary.
Quoted 11 lines
xen/include/asm-x86/microcode.h struct microcode_ops { · line 33
Quoted 8 lines
xen/include/asm-x86/microcode.h +1
-0@@ -30,6 +30,7 @@ struct microcode_ops {bool (*match_cpu)(const struct microcode_patch *patch);enum microcode_match_result (*compare_patch)(const struct microcode_patch *new,const struct microcode_patch *old); +bool (*is_blacklisted)(void );Why a hook rather than a boolean flag, which could be set by
microcode_update_one()(as invoked during AP bringup)?
How about set the boolean flag in Intel_errata_workarounds?
One limitation of setting the flag in microcode_update_one() is:
BSP also calls microcode_update_one(). But calculating LLC size per core on BSP would meet the same issue as the following patch (i.e. patch 16/16): BSP's current_cpu_data isn't initialized properly. We might need to revert commit f97838bbd980a01 in some way and reenumerate features after ucode loading is done.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 15/16] microcode: disable late loading if CPUs are affected by BDF90
Quoted 13 lines · Chao Gao
Quoted 11 lines · Jan Beulich
xen/include/asm-x86/microcode.h struct microcode_ops { · line 33
Quoted 7 lines · Chao Gao
xen/include/asm-x86/microcode.h +1
-0@@ -30,6 +30,7 @@ struct microcode_ops {bool (*match_cpu)(const struct microcode_patch *patch);enum microcode_match_result (*compare_patch)(const struct microcode_patch *new,const struct microcode_patch *old); +bool (*is_blacklisted)(void );Why a hook rather than a boolean flag, which could be set by
microcode_update_one()(as invoked during AP bringup)?
Quoted 1 line
How about set the boolean flag in
Intel_errata_workarounds?
Wherever it ends up working best. My suggestion was just a wild guess.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 15/16] microcode: disable late loading if CPUs are affected by BDF90
In reply to Chao GaoQuoted 7 lines · Chao Gao
It ports the implementation of
is_blacklisted()in linux kernel to Xen.Late loading may cause system hang if CPUs are affected by BDF90. Check against BDF90 before performing a late loading.
Signed-off-by Chao Gao <[email protected]>
There is an Intel-blessed workaround for this issue, which is to perform parallel loading and issue a WBINVD inside the rendezvous, which is being used in production by a number of vendors.
We should prohibit late loading cases which we know to be broken, but parallel loading should be permitted.
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v10 16/16 microcode/intel: writeback and invalidate cache conditionally
In reply to Chao GaoIt is needed to mitigate some issues on this specific Broadwell CPU.
--- xen/arch/x86/microcode_intel.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)
xen/arch/x86/microcode_intel.c +27 -0
@@ -305,6 +305,31 @@ static bool is_blacklisted(void)return false; } +static void microcode_quirk (void ) +{ +struct cpuinfo_x86 *c; +uint64_t llc_size; + +/* +* Don't refer to current_cpu_data, which isn't fully initialized +* before this stage. +*/ +if ( system_state < SYS_STATE_smp_boot ) +return ; + + c = ¤t_cpu_data; + llc_size = c->x86_cache_size *1024ULL ; +do_div (llc_size, c->x86_max_cores); + +/* +* To mitigate some issues on this specific Broadwell CPU, writeback and +* invalidate cache regardless of ucode revision. +*/ +if ( c->x86 ==6 && c->x86_model ==0x4F && c->x86_mask ==0x1 && + llc_size >2621440 ) +wbinvd (); +} +static int apply_microcode (const struct microcode_patch *patch) {uint64_t msr_content;
@@ -323,6 +348,8 @@ static int apply_microcode(const struct microcode_patch *patch)BUG_ON (local_irq_is_enabled ()); +microcode_quirk (); +/* write microcode via MSR 0x79 */ wrmsrl (MSR_IA32_UCODE_WRITE , (unsigned long )mc_intel->bits);wrmsrl (MSR_IA32_UCODE_REV ,0x0ULL );
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v10 16/16] microcode/intel: writeback and invalidate cache conditionally
xen/arch/x86/microcode_intel.c static bool is_blacklisted(void) · line 310
Quoted 9 lines · Chao Gao
xen/arch/x86/microcode_intel.c +3
-0@@ -305,6 +305,31 @@ static bool is_blacklisted(void)return false; } +static void microcode_quirk (void ) +{ +struct cpuinfo_x86 *c;
const
xen/arch/x86/microcode_intel.c static bool is_blacklisted(void) · line 318
Quoted 8 lines
xen/arch/x86/microcode_intel.c +8
-0+uint64_t llc_size; + +/* +* Don't refer to current_cpu_data, which isn't fully initialized +* before this stage. +*/ +if ( system_state < SYS_STATE_smp_boot ) +return ;
If the workaround is needed, why would it not be needed for the BSP?
xen/arch/x86/microcode_intel.c static bool is_blacklisted(void) · line 322
Quoted 3 lines
xen/arch/x86/microcode_intel.c +3
-0+ c = ¤t_cpu_data; + llc_size = c->x86_cache_size *1024ULL ; +do_div (llc_size, c->x86_max_cores);
Instead of the local variable, ...
xen/arch/x86/microcode_intel.c static bool is_blacklisted(void) · line 329
Quoted 7 lines
xen/arch/x86/microcode_intel.c +7
-0+ +/* +* To mitigate some issues on this specific Broadwell CPU, writeback and +* invalidate cache regardless of ucode revision. +*/ +if ( c->x86 ==6 && c->x86_model ==0x4F && c->x86_mask ==0x1 && + llc_size >2621440 )
... why don't you compare c->x86_cache_size / c->x86_max_cores against 2560 here? Is there any risk of truncating relevant low bits?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 7 lines · Chao Gao
This series includes below changes:
1. Patch 1-11: introduce a global microcode cache and some cleanup
2. Patch 12: synchronize late microcode loading
3. Patch 13: support parallel microcodes update on different cores
4. Patch 14: block #NMI handling during microcode loading
5. Patch 15: disable late ucode loading due to BDF90
6. Patch 16: callwbinvd()conditionally
I don't know why it didn't occur to me earlier, but what about parked / offlined CPUs? They'll have their ucode updated when they get brought back online, but until then their ucode will disagree with that of the online CPUs. For truly offline CPUs this may be fine, but parked ones should probably be updated, perhaps via the same approach as used when C-state data becomes available (see set_cx_pminfo())?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 9 lines · Jan Beulich
Quoted 7 lines · Chao Gao
This series includes below changes:
1. Patch 1-11: introduce a global microcode cache and some cleanup
2. Patch 12: synchronize late microcode loading
3. Patch 13: support parallel microcodes update on different cores
4. Patch 14: block #NMI handling during microcode loading
5. Patch 15: disable late ucode loading due to BDF90
6. Patch 16: callwbinvd()conditionally
Quoted 7 lines
I don't know why it didn't occur to me earlier, but what about parked / offlined CPUs? They'll have their ucode updated when they get brought back online, but until then their ucode will disagree with that of the online CPUs. For truly offline CPUs this may be fine, but parked ones should probably be updated, perhaps via the same approach as used when C-state data becomes available (see
set_cx_pminfo())?
Yes. It provides a means to wake up the parked CPU and a chance to run some code (like loading ucode). But parked CPUs are cleared from sibling info and cpu_online_map (see __cpu_disable()). If parallel ucode loading is expected on parked CPUs, we should be able to determine the primary threads and the number of cores no matter it is online or parked. To this end, a new sibling map should be maintained for each CPU and this map isn't changed when a CPU gets parked.
In Linux kernel, the approach is quite simple: late loading is prohibited if any CPU is parked; admin should online all parked CPU before loading ucode.
Do you have any preference?
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 18 lines · Chao Gao
Quoted 9 lines · Jan Beulich
Quoted 7 lines · Chao Gao
This series includes below changes:
1. Patch 1-11: introduce a global microcode cache and some cleanup
2. Patch 12: synchronize late microcode loading
3. Patch 13: support parallel microcodes update on different cores
4. Patch 14: block #NMI handling during microcode loading
5. Patch 15: disable late ucode loading due to BDF90
6. Patch 16: callwbinvd()conditionallyQuoted 7 lines
I don't know why it didn't occur to me earlier, but what about parked / offlined CPUs? They'll have their ucode updated when they get brought back online, but until then their ucode will disagree with that of the online CPUs. For truly offline CPUs this may be fine, but parked ones should probably be updated, perhaps via the same approach as used when C-state data becomes available (see
set_cx_pminfo())?
Quoted 7 lines
Yes. It provides a means to wake up the parked CPU and a chance to run some code (like loading ucode). But parked CPUs are cleared from sibling info and
cpu_online_map(see__cpu_disable()). If parallel ucode loading is expected on parked CPUs, we should be able to determine the primary threads and the number of cores no matter it is online or parked. To this end, a new sibling map should be maintained for each CPU and this map isn't changed when a CPU gets parked.
Would this really be necessary? If any thread in a core is not parked, bringing up the parked threads is unnecessary. If all threads of a core are parked, simply nudge the thread with ID zero?
Quoted 3 lines
In Linux kernel, the approach is quite simple: late loading is prohibited if any CPU is parked; admin should online all parked CPU before loading ucode.
Well, this is certainly an option, but (as per above) I think this is too rigid: Refusing the operation would be necessary only if there's a core with all of its threads parked. (I'd in particular like late loading to work in SMT-disabled mode.)
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel