Help with prioritizing internet Cafe Terminals
Hi All,
I am new to tc so please forgive me. I have read as much documentation as I can get my hands on, but I still have problems with getting the rules right. Here is my scenario:
Internet Cafe/Office
4 Internet Cafe Terminals
3 Office Terminals
Leased Line connectivity at 64Kbps.
What I would like to have:
All Cafe terminals have priority to the internet over the office machines. Each cafe terminal must not be able to have all the bandwidth if other cafe terminals are online. If all cafe terminals are online at once, the bandwidth must be shared evenly amongst them. All Office Terminals must have the lease priority.
I hope this makes sense.
I anyone in a position to help me here?
TIA
Craig
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 9 lines · Craig Main
All Cafe terminals have priority to the internet over the office machines. Each cafe terminal must not be able to have all the bandwidth if other cafe terminals are online. If all cafe terminals are online at once, the bandwidth must be shared evenly amongst them. All Office Terminals must have the lease priority.
I hope this makes sense.
I anyone in a position to help me here?
My Fair NAT script [1] comes very close to that. It can share available bandwidth evenly among your machines; however, it can't give your cafe a higher priority than your office. A workaround for that might be to put all office machines together in a group, so all of them together would get the same priority and bandwidth as a single cafe terminal.
If the script isn't suitable for your network, it may serve as an example. At least the documentation or the class graphics should give you some idea how to create your own shaping setup.
HTH
Andreas
[1] http://www.metamorpher.de/fairnat/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
I have out together the following script, can those in the know please comment on what I have done and whether it will achieve what I am looking for. Many thanks.
#!/bin/bash
tc qdisc del dev eth1 root
tc qdisc add dev eth1 root handle 1: htb default 12
tc class add dev eth1 parent 1: classid 1:1 htb rate 64kbit ceil 64kbit burst 20k
tc class add dev eth1 parent 1: classid 1:2 htb rate 15kbit ceil 64kbit prio 0 burst 20k
tc class add dev eth1 parent 1: classid 1:3 htb rate 15kbit ceil 64kbit prio 0 burst 20k
tc class add dev eth1 parent 1: classid 1:4 htb rate 15kbit ceil 64kbit prio 0 burst 20k
tc class add dev eth1 parent 1: classid 1:5 htb rate 15kbit ceil 64kbit prio 0 burst 20k
tc class add dev eth1 parent 1: classid 1:12 htb rate 4kbit ceil 64kbit prio 1
tc filter add dev eth1 protocol ip parent 1: prio 1 handle 1 fw classid 1:2 tc filter add dev eth1 protocol ip parent 1: prio 1 handle 2 fw classid 1:3 tc filter add dev eth1 protocol ip parent 1: prio 1 handle 3 fw classid 1:4 tc filter add dev eth1 protocol ip parent 1: prio 1 handle 4 fw classid 1:5
iptables -F PREROUTING -t mangle
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.1 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.2 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.3 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.4 -j MARK --set-mark 1
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
Quoted 5 lines · Craig Main
I have out together the following script, can those in the know please comment on what I have done and whether it will achieve what I am looking for. Many thanks.
<snip>
Quoted 6 lines
iptables -F PREROUTING -t mangle
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.1 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.2 -j MARK --set-mark 1
You are giving all your addresses the same MARK? I don't think that's what you want.
Quoted 4 lines
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.3 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.4 -j MARK --set-mark 1
Signature · 8 lines
Jason Boxman Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida http://edseek.com/ - Linux and FOSS stuff _______________________________________________ LARTC mailing list / [email protected] http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
That was a typo on my part...I am more interested in the actual tc commands and setups. Will they do what I want?
Thanks
C
Quoted 24 lines · Jason Boxman
Quoted 5 lines · Craig Main
I have out together the following script, can those in the know please comment on what I have done and whether it will achieve what I am looking for. Many thanks.
<snip>
Quoted 6 lines
iptables -F PREROUTING -t mangle
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.1 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.2 -j MARK --set-mark 1You are giving all your addresses the same MARK? I don't think that's what you want.
Quoted 4 lines
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.3 -j MARK --set-mark 1
iptables -A PREROUTING -t mangle -i eth0 -p tcp -s 192.168.0.4 -j MARK --set-mark 1--
Quoted 9 lines
Jason Boxman
Perl Programmer / *NIX Systems Administrator Shimberg Center for Affordable Housing | University of Florida
http://edseek.com/ - Linux and FOSS stuff_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/