Skip to contentSkip to conversation

Call to atention about using hash functions as content indexers (SCM saga)

DISCUSSION Pedro Larroy 10 participants 11 messages Apr 11, 2005 – Apr 14, 2005

lore
Share & tools
lore
#0 lore raw

Hi

I had a quick look at the source of GIT tonight, I'd like to warn you about the use of hash functions as content indexers.

As probably you are aware, hash functions such as SHA-1 are surjective not bijective (1-to-1 map), so they have collisions. Here one can argue about the low probability of such a collision, I won't get into subjetive valorations of what probability of collision is tolerable for me and what is not.

I my humble opinion, choosing deliberately, as a design decision, a method such as this one, that in some cases could corrupt data in a silent and very hard to detect way, is not very good. One can also argue that the probability of data getting corrupted in the disk, or whatever could be higher than that of the collision, again this is not valid comparison, since the fact that indexing by hash functions without additional checking could make data corruption legal between the reasonable working parameters of the program is very dangerous.

And by the way, I've read
http://www.usenix.org/events/hotos03/tech/full_papers/henson/henson_html/node15.html

and I don't agree with it. Asides from the "avalanche effect" the properties of a good hash function is that distributes well the entropy between the output bits, so probably, although the inputs are not random, the pdf change in the outputs would be small, otherwise it would be easier to find collision by differential or statistical methods.

Last, hash functions should be only used to check data integrity, and that's the reason of the "avalanche effect", so even single bit errors are propagated and it's effect is very noticeable at the output.

Regards.

Signature · 4 lines
Pedro Larroy Tovar | Linux & Network consultant |  pedro%larroy.com 
Make debian mirrors with debian-multimirror: http://pedro.larroy.com/deb_mm/
	* Las patentes de programación son nocivas para la innovación * 
				http://proinnova.hispalinux.es/
#1 lore raw

Dear diary, on Tue, Apr 12, 2005 at 12:40:21AM CEST, I got a letter where Pedro Larroy <[email protected]> told me that...

Quoted 1 line

Hi

Hello,

Quoted 9 lines

I had a quick look at the source of GIT tonight, I'd like to warn you about the use of hash functions as content indexers.

As probably you are aware, hash functions such as SHA-1 are surjective not bijective (1-to-1 map), so they have collisions. Here one can argue about the low probability of such a collision, I won't get into subjetive valorations of what probability of collision is tolerable for me and what is not.

Quoted 8 lines

I my humble opinion, choosing deliberately, as a design decision, a method such as this one, that in some cases could corrupt data in a silent and very hard to detect way, is not very good. One can also argue that the probability of data getting corrupted in the disk, or whatever could be higher than that of the collision, again this is not valid comparison, since the fact that indexing by hash functions without additional checking could make data corruption legal between the reasonable working parameters of the program is very dangerous.

(i) 1461501637330902918203684832716283019655932542976 possible SHA1 hashes.

(ii) In git-pasky, there's (turnable off) detection of collisions.

(iii) Your argument against comparing with the probability of a hardware error does not make sense to me.

(iv) You fail to propose a better solution.

Signature · 3 lines
				Petr "Pasky" Baudis
Stuff: http://pasky.or.cz/
98% of the time I am right. Why worry about the other 3%.
#2 lore raw
Quoted 1 line · Petr Baudis

(iv) You fail to propose a better solution.

I would feel safer with back end storage filenames based on email and mtime together with an optional hash lookup that turns collisions into worse performance. But that's just me.

/ magnus

#3 lore raw
Quoted 7 lines · Magnus Damm
Quoted 1 line · Petr Baudis

(iv) You fail to propose a better solution.

I would feel safer with back end storage filenames based on email and mtime together with an optional hash lookup that turns collisions into worse performance. But that's just me.

Have a look at bazaar-ng (http://www.bazaar-ng.org/), they seem to do this. I had a quick look at it and they also seem to store the full files when they change (similar to git). It is also a bit ahead of git (started earlier) and looks quite promising.

Signature · 1 line
Catalin
#4 lore raw
In reply to Petr Baudis
Quoted 2 lines · Petr Baudis

Dear diary, on Tue, Apr 12, 2005 at 12:40:21AM CEST, I got a letter where Pedro Larroy <[email protected]> told me that...

[snip...]

Quoted 2 lines

(iii) Your argument against comparing with the probability of a hardware error does not make sense to me.

I didn't understand it either, at first, but then I read this:

http://www.usenix.org/events/hotos03/tech/full_papers/henson/henson_html/node9.html

Whether this is serious enough to actually worry about is another question...

-Barry K. Nathan <[email protected]>

#5 lore raw
In reply to Petr Baudis
Quoted 24 lines · Petr Baudis

Dear diary, on Tue, Apr 12, 2005 at 12:40:21AM CEST, I got a letter where Pedro Larroy <[email protected]> told me that...

Quoted 1 line

Hi

Hello,

Quoted 9 lines

I had a quick look at the source of GIT tonight, I'd like to warn you about the use of hash functions as content indexers.

As probably you are aware, hash functions such as SHA-1 are surjective not bijective (1-to-1 map), so they have collisions. Here one can argue about the low probability of such a collision, I won't get into subjetive valorations of what probability of collision is tolerable for me and what is not.

Quoted 8 lines

I my humble opinion, choosing deliberately, as a design decision, a method such as this one, that in some cases could corrupt data in a silent and very hard to detect way, is not very good. One can also argue that the probability of data getting corrupted in the disk, or whatever could be higher than that of the collision, again this is not valid comparison, since the fact that indexing by hash functions without additional checking could make data corruption legal between the reasonable working parameters of the program is very dangerous.

Quoted 13 lines

(i) 1461501637330902918203684832716283019655932542976 possible SHA1 hashes.

(ii) In git-pasky, there's (turnable off) detection of collisions.

(iii) Your argument against comparing with the probability of a hardware error does not make sense to me.

(iv) You fail to propose a better solution.

Signature · 3 lines
				Petr "Pasky" Baudis
Stuff: http://pasky.or.cz/
98% of the time I am right. Why worry about the other 3%.

This is a standard, free (no patents) hash-function that works. The fact that somebody can write a program, designed to create collisions, and demonstrate that after many weeks of processing, iteratively building upon the previous result, and finally cause a collision, really isn't relevant for this application.

There is a good possibility that there are no hash-functions that can't be broken.

Cheers,
Dick Johnson
Penguin : Linux version 2.6.11 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.

#6 lore raw
In reply to Pedro Larroy
Quoted 10 lines · Pedro Larroy

I had a quick look at the source of GIT tonight, I'd like to warn you about the use of hash functions as content indexers.

As probably you are aware, hash functions such as SHA-1 are surjective not bijective (1-to-1 map), so they have collisions. Here one can argue about the low probability of such a collision, I won't get into subjetive valorations of what probability of collision is tolerable for me and what is not.

Quoted 3 lines

I my humble opinion, choosing deliberately, as a design decision, a method such as this one, that in some cases could corrupt data in a silent and very hard to detect way, is not very good.

Actually, it will very likely be very, very easy to detect. What happens if there is a hash collision? Well, in the case of a non-malicious collision, instead of retrieving the correct version of a file, we will get some random version of another file. The moment you try to compile with that incorrect file, you will with an extremely high probability, get a failed compile, which will be blantently obvious.

In the case of a malicous attacker trying to introduce a collision, it should be noted first of all that the recent SHA-1 breakage was a collision attack, not a pre-image attack. So it's not useful for trying to find another message that hashes to the same value as a one already in use by git. So the work factor is still 2**80. Secondly, even if an attacker could generate another file which has the same hash as a pre-existing file, it still has to look like a valid git object, and it still has to be a valid C file or it will again be blatently obvious when you try to compile the sucker.

Quoted 4 lines

One can also argue
that the probability of data getting corrupted in the disk, or whatever could be higher than that of the collision, again this is not valid comparison

That's a matter of some religious dispute. You can always reduce the probability of a collsion down to an arbitrarily small value simply by using a larger hash --- and switch hashes in git is quite simple since it would just be a matter of running a program to calculate the hash using a different algorithm, and renaming the files. You can even use hardlinks if you want to support two different hash algorithms simultaneously during some transition period.

So past a certain point, there is a probability that all of molecules of oxygen in the room will suddenly migrate outdoors, and you could suffocate. Is it rational to spend time worrying about that possibility? I'll leave that for you to decide.

- Ted

#7 lore raw

I hold my breath for weeks at a time, just incase something like this happens! I thought I was the only one!

Quoted 6 lines · Theodore Ts'o

So past a certain point, there is a probability that all of molecules of oxygen in the room will suddenly migrate outdoors, and you could suffocate. Is it rational to spend time worrying about that possibility? I'll leave that for you to decide.

- Ted

#8 lore raw
In reply to Pedro Larroy

Simply put, the best known attack of SHA-1 takes 2^69 hash operations. ( http://www.schneier.com/blog/archives/2005/02/sha1_broken.html ) The attack is still only an unpublished paper and has not yet been implemented. An attack is: you try as hard as you can to find a collision between two arbitrary messages (i.e. two arbitrary --and nonsensical-- source files).
In the context of git, a better estimation would be the number of hash operations needed to find a message that has the same hash than a given fixed message (e.g. mm/memory.c). This is more like 2^100 hash operations. And if a collision is found, this is very likely using a message that *doesn't* look like a C source file...

Moreover, no example of collision is known, AFAIK.

In other words: this won't happen.

Best,
/er.

#9 lore raw
Quoted 6 lines · Eric Rannaud

Simply put, the best known attack of SHA-1 takes 2^69 hash operations. ( http://www.schneier.com/blog/archives/2005/02/sha1_broken.html ) The attack is still only an unpublished paper and has not yet been implemented. An attack is: you try as hard as you can to find a collision between two arbitrary messages (i.e. two arbitrary --and nonsensical-- source files).

Well, don't be quite so confident. Yes, the attacks generally require a significant uncontrollable chunk of data, but it's easy enough to encode that in (for example) a comment.

And remember, attacks always get better, they never get worse.

Remaining cautious about the strength of your hash functions is a good idea.

Especially because *nobody* has a real theory of operation behind online hash functions. The stories I've heard imply that even NSA doesn't really "do" hash functions; they prefer HMAC-style keyed verifiers (though of course, we on the outside can never be sure what's happening in the puzzle palace.)

Every (practical) hash function in existence today is of the form "Well, I mixed stuff up real good, and my friends and I tried and couldn't break it". And 160 bits still looks *fairly* secure, but so did 64-bit symmetric key back in '93.

Quoted 5 lines

In the context of git, a better estimation would be the number of hash operations needed to find a message that has the same hash than a given fixed message (e.g. mm/memory.c). This is more like 2^100 hash operations. And if a collision is found, this is very likely using a message that *doesn't* look like a C source file...

In particular, your defense here is specious. I agree that second preimage is an unmanagably large problem for SHA1 for the forseeable future (say, 8 years out), but collision results almost always result in partially-controlled attack text. So I can choose my nefarious content, and encode the collision entropy in non-operative text (a C comment, for example).

When your tool breaks, replace it with a new one. Don't say "well, the jagged bits haven't hurt me *yet*."

-andy

#10 lore raw
Quoted 6 lines · Andy Isaacson

In particular, your defense here is specious. I agree that second preimage is an unmanagably large problem for SHA1 for the forseeable future (say, 8 years out), but collision results almost always result in partially-controlled attack text. So I can choose my nefarious content, and encode the collision entropy in non-operative text (a C comment, for example).

Everything you said is fair enough, and I do agree with this argument in the context of authentication: that is if you expect an attack (even if a chunk of non-operative bytes won't go unnoticed for long in a the kernel tree, but that's not the point).

But the original post of Pedro was, I think, about collisions occurring 'randomly' between two genuine modifications of a source file. In particular, the paper that was linked to by Pedro is concerned with this kind of unexpected collisions, i.e. about integrity in normal operation and not about security (btw, this paper seems kind of bogus to me because it never specifies the hash function in use).

I took the example of this attack against SHA-1 only to illustrate that *even* if you try to find a collision, you just can't find one (at least these days).

Quoted 1 line

From which I think it is fair to say that such a collision won't happen

between two different versions of the same file, during the normal process of revision.

I mean, if in the normal revision process of the kernel, a SHA-1 collision was to be found, by chance, who gets to publish the paper at the next Crypto conference?

However, if we consider the case of an attack, well, that's different. And you're right.

    /er.
Signature · 1 line
http://www.eleves.ens.fr/home/rannaud/