Problems with edd
Quoted 31 lines
Hi all. I have a problem with trying to boot from a Fedora 9 installation CD-R. It works on another machine, so the disk is OK. I guess if anyone knows the answer then it will be found here on the kernel developers list.
When trying to boot from a CD-R installation disk, on my Advent 6415 laptop I get the following:
Welcome to Fedora 9! [the installer splash screen]
I then click on either:
Install or upgrade an existing system [or]
Install or upgrade an existing system (text mode)[both give me the same following error]
Loading vmlinuz...........................................
..............Loading initrd.img........................................
.................
...............ready.
Probing EDD (edd=off to disable)... ok
vmlinuz: attempted DOS system call
boot:If I hit return now, the machine goes back to the 'Welcome
to Fedora 9!' splash screen.
Quoted 7 lines
I have edited the kernel parameters at the spalsh screen and tried:
edd=skipmbr edd=off
All that does is not display the line:
Probing EDD (edd=off to disable)... ok
as you can see "ok" , then this is no edd problem it would have been an edd problem if you could only see the message before "ok".
Quoted 4 lines
The installation still hangs at the boot: prompt.
Has anyone come across the behaviour before please?
no, but i`m sure that this is not related to edd.
not sure if this is fedora specific, but it seems so - see for example:
http://blogs.gnome.org/diegoe/2008/04/10/vesamenuc32-attempted-dos-system-call/
maybe some issue with the vesa bios probe for getting video mode information or switching to appropriate mode.
cc`ing hpa - maybe he as a clue.....
Quoted 2 lines
Is there any way I can get my laptop to boot from this media, maybe by passing some undocumented kernel parameters?
see that link. try booting with "linux" or "linux0".
i think its good to report to the fedora people - maybe the have added stuff which doesnt work reliable...
Quoted 2 lines
Kind Regards,
Keith Roberts
regards
roland
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
Quoted 11 lines · [email protected] wrote:
no, but i`m sure that this is not related to edd.
not sure if this is fedora specific, but it seems so - see for example:
http://blogs.gnome.org/diegoe/2008/04/10/vesamenuc32-attempted-dos-system-call/
maybe some issue with the vesa bios probe for getting video mode information or switching to appropriate mode.
cc`ing hpa - maybe he as a clue.....
This message usually means your vesamenu.c32 is out of sync with the underlying Syslinux version.
If that is not an issue, there is virtually no information in that blog (lovely to use a blog instead of filing a proper bug report) that one can hang a hat on.
-hpa
Quoted 14 lines · [email protected] wrote:
Quoted 14 lines
Hi all. I have a problem with trying to boot from a Fedora 9 installation CD-R. It works on another machine, so the disk is OK. I guess if anyone knows the answer then it will be found here on the kernel developers list.
When trying to boot from a CD-R installation disk, on my Advent 6415 laptop I get the following:
Welcome to Fedora 9! [the installer splash screen]
I then click on either:
Install or upgrade an existing system [or]
Install or upgrade an existing system (text mode)[both give me the same following error]
Quoted 8 lines
Quoted 8 lines
Loading vmlinuz........................................... ..............
Loading initrd.img........................................
.................
...............ready.
Probing EDD (edd=off to disable)... ok
vmlinuz: attempted DOS system call
boot:
This message means something has invoked an interrupt in the range 0x20 to 0x3f, which it should never have done, since that's in the operating system range.
Given the complaint about vesamenu further down the page, I'm assuming the VESA BIOS is invoking a DOS interrupt(!!!!)... although it's very hard to say for sure.
It might be possible to track down by augmenting syslinux to print the CS:IP of the supposed DOS system call; if this is the VESA BIOS, it would be in the range C000:xxxx.
This probably would be a useful hack anyway, so I'll just implement it.
-hpa
Quoted 10 lines · [email protected] wrote:
Quoted 10 lines
Loading vmlinuz........................................... ..............
Loading initrd.img........................................
.................
...............ready.
Probing EDD (edd=off to disable)... ok
vmlinuz: attempted DOS system call
boot:
Quoted 3 lines
Quoted 3 lines
If I hit return now, the machine goes back to the 'Welcome
to Fedora 9!' splash screen.
I have put in syslinux 3.70-pre16 code to print the source of this message. You may want to try to grab isolinux from this release and update your CD image to get some useful debugging info out of this.
-hpa
Quoted 15 lines · H. Peter Anvin
To: [email protected]
From: H. Peter Anvin <[email protected]>
Subject: Re: Problems with eddQuoted 10 lines · [email protected] wrote:
Quoted 10 lines
Loading vmlinuz........................................... ..............
Loading initrd.img........................................
.................
...............ready.
Probing EDD (edd=off to disable)... ok
vmlinuz: attempted DOS system call
boot:
Quoted 7 lines
Quoted 3 lines
Quoted 3 lines
If I hit return now, the machine goes back to the 'Welcome to Fedora
9!' splash screen.I have put in syslinux 3.70-pre16 code to print the source of this message. You may want to try to grab isolinux from this release and update your CD image to get some useful debugging info out of this.
-hpa
Not being a kernel guru, I'm not sure how to do that hpa?
Where do I get isolinux from please?
how do I update my CD image?
I'm willing to give this a try if it will sort out the problem.
Please CC me as I'm off the list now. Can't seem to get back on again either.
Kind Regards,
Keith
Quoted 9 lines · Keith Roberts
Quoted 4 lines
I have put in syslinux 3.70-pre16 code to print the source of this message. You may want to try to grab isolinux from this release and update your CD image to get some useful debugging info out of this.
-hpa
Not being a kernel guru, I'm not sure how to do that hpa?
Where do I get isolinux from please?
ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/syslinux-3.70-pre16.tar.bz2
Quoted 1 line
how do I update my CD image?
You will need to run mkisofs with the same options used to generate the image.
In a pinch, if you can point me to the original ISO I could try to doctor it.
Quoted 1 line
I'm willing to give this a try if it will sort out the problem.
That would be useful. This is potentially a previously unreported BIOS issue which might have a straightforward workaround, so I'm eager to get the data.
-hpa
Quoted 12 lines · H. Peter Anvin
To: Keith Roberts <[email protected]>
From: H. Peter Anvin <[email protected]>
Subject: Re: Problems with eddQuoted 7 lines · Keith Roberts
Quoted 4 lines
I have put in syslinux 3.70-pre16 code to print the source of this message. You may want to try to grab isolinux from this release and update your CD image to get some useful debugging info out of this.
-hpa
Not being a kernel guru, I'm not sure how to do that hpa?
Quoted 8 lines
Quoted 2 lines
Where do I get isolinux from please?
ftp://ftp.kernel.org/pub/linux/utils/boot/syslinux/Testing/syslinux-3.70-pre16.tar.bz2
Quoted 1 line
how do I update my CD image?
You will need to run mkisofs with the same options used to generate the image.
OK - thankyou for that, hpa
Quoted 1 line
In a pinch, if you can point me to the original ISO I could try to doctor it.
I originally got mine from:
http://mirror.switch.ch/ftp/mirror/fedora/linux/releases/9/Fedora/i386/iso/Fedora-9-i386-netinst.iso
The sha1sum is:
3b1df20ece05d64c34dd9c64400975b74eded0f2 Fedora-9-i386-netinst.iso
I have also put it on my website, just in case it gets updated on the mirrors:
http://www.karsites.net/fedora/9/Fedora-9-i386-netinst.iso
obviously same sha1sum ;)
The Fedora guys are following this thread now. I have put the link to your patch on my Fedora bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=450678
I have never built an iso file before, but I'll read up on it. My plan was to copy the files from the F9 net-installer CD to my hard drive, update them with your patch, and then re-make the iso file and burn that back to CD-R. Would that work?
Quoted 5 lines
Quoted 1 line
I'm willing to give this a try if it will sort out the problem.
That would be useful. This is potentially a previously unreported BIOS issue which might have a straightforward workaround, so I'm eager to get the data.
-hpa
Regards
Keith
Quoted 7 lines · Keith Roberts
The Fedora guys are following this thread now. I have put the link to your patch on my Fedora bug report:
https://bugzilla.redhat.com/show_bug.cgi?id=450678
I have never built an iso file before, but I'll read up on it. My plan was to copy the files from the F9 net-installer CD to my hard drive, update them with your patch, and then re-make the iso file and burn that back to CD-R. Would that work?
Yes, that should work, assuming the iso file is generated with the same mkisofs options as the original image.
-hpa
Thanks for the helpfull repies.
Please can you CC me or email directly regarding this subject, as I'm moving to the Fedora rawhide developrs list with this one now.
I will post the solution once it has been found to LKML.
Kind Regards
Keith Roberts.