Bump carl9170 1.9.6 -> 1.9.9?
linux-firmware seems to ship an oldish carl9170-1.fw, which seems to work ok except for spewing a lot of
"[1889329.659407] ieee80211 phy0: invalid plcp cck rate (0)." messages.
Grabbing 1.9.9 seems to make them go away and the driver works just as well :-)
Any chance of someone bumping the version so the newer firmware gets shipped by distros?
Quoted 4 lines · Pekka Pietikäinen
linux-firmware seems to ship an oldish carl9170-1.fw, which seems to work ok except for spewing a lot of
"[1889329.659407] ieee80211 phy0: invalid plcp cck rate (0)." messages.
In case of carl9170, these messages indicate that some non-802.11 transmitter is near by (and confusing the chip a bit). These messages (and the associated issues) can magically appear and disappear... So, chances are that they reappear sometime later. There's little the firmware can do here.
Quoted 5 lines
Grabbing 1.9.9 seems to make them go away and the driver works just as well :-)
Any chance of someone bumping the version so the newer firmware gets shipped by distros?
Oh, I tried that back in October 2013.
<http://comments.gmane.org/gmane.linux.kernel.wireless.general/114639>
But no agreement has been reached. And 1.9.6 is good enough to download the later firmware releases though. I'm sorry, but that's how it is at the moment. But if you want to help, you could make a patch (the way Rick/Ben wants it) and post it here ([email protected]). I can't do it, I tried and failed several times. If you are interested: The firmware is under GPLv2, no sign-offs or acks (from QCA, me or anyone else) is needed, you (or anyone else interested) can go right ahead.
Regards,
Christian