Skip to contentSkip to conversation

a question about p4_clockmod module on Xeon quad core processors

DISCUSSION Xiaoning Ding 5 participants 16 messages Jan 27, 2009 – Jan 30, 2009

lore
Share & tools
lore
#0 lore raw

Hi list,

I have tried the p4-clockmod module in Linux kernel 2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems current p4-clockmod driver still cannot support Intel Quad core processors, right?

I know I can also use acpi-cpufreq. It can only scale down the frequence from 2.67GHz to 2GHz. But I need some lower frequencies for some experiments.

Thanks!

Xiaoning

#1 lore raw
Quoted 5 lines · On Tue, 27 Jan 2009 12:17:25 -0800 (PST) Xiaoning Ding <[email protected]> wrote:

Hi list,

I have tried the p4-clockmod module in Linux kernel 2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems current p4-clockmod driver still cannot support Intel Quad core processors, right?

you know that using clockmod will actually cost you energy rather than saving it right?

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#2 lore raw

I am not trying to save energy. I want to do some experiments that requires lower CPU speed. But the experiments are not energy related.

Xiaoning

Quoted 26 lines · Arjan van de Ven

From: Arjan van de Ven <[email protected]>
Subject: Re: a question about p4_clockmod module on Xeon quad core processors
To: [email protected]
Cc: [email protected]
Date: Tuesday, January 27, 2009, 9:23 PM

Quoted 3 lines · On Tue, 27 Jan 2009 12:17:25 -0800 (PST) Xiaoning Ding <[email protected]> wrote:

Hi list,

I have tried the p4-clockmod module in Linux kernel

2.6.29 on Xeon

Quoted 1 line

5355 quad-core CPUs with no luck. It seems current

p4-clockmod driver

Quoted 1 line

still cannot support Intel Quad core processors,

right?

you know that using clockmod will actually cost you energy rather than
saving it right?

Signature · 3 lines
Arjan van de Ven 	Intel Open Source Technology Centre
For development, discussion and tips for power savings, 
visit http://www.lesswatts.org
#3 lore raw
In reply to Xiaoning Ding
Quoted 5 lines · Xiaoning Ding

Hi list,

I have tried the p4-clockmod module in Linux kernel 2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems current p4-clockmod driver still cannot support Intel Quad core processors, right?

I know I can also use acpi-cpufreq. It can only scale down the frequence from 2.67GHz to 2GHz. But I need some lower frequencies for some experiments.

p4-clockmod doesn't change the processor frequency.
Because of common misconceptions like this, the user interface has been removed.

In 2.6.29, the clock modulation code is called directly from ACPI whenever thermal events indicate that throttling is necessary.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#4 lore raw

Thanks for the correction.
My experiments need to reduce CPU speed. However, I can only reduce the speed by about 30% (from 2.67GHz to 2GHz) with ACPI. That is not enough for the experiments.

p4-clockmod has not been removed from 2.6.29. It is under the same directory as acpi-cpufreq (arch/x86/kernel/cpu/cpufreq). So I thought it was an alternative approach. But I could not get it loaded.

Xiaoning

Quoted 31 lines · Dave Jones

From: Dave Jones <[email protected]>
Subject: Re: a question about p4_clockmod module on Xeon quad core processors
To: "Xiaoning Ding" <[email protected]>
Cc: [email protected]
Date: Wednesday, January 28, 2009, 9:02 PM

Quoted 3 lines · Xiaoning Ding

Hi list,

I have tried the p4-clockmod module in Linux kernel

2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems current p4-clockmod driver still cannot support Intel Quad core processors, right?

Quoted 2 lines

I know I can also use acpi-cpufreq. It can only scale

down the frequence from 2.67GHz to 2GHz. But I need some lower frequencies for some experiments.

p4-clockmod doesn't change the processor frequency. Because of common misconceptions like this, the user interface has been removed.

In 2.6.29, the clock modulation code is called directly from ACPI
whenever thermal events indicate that throttling is necessary.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#5 lore raw

[please don't top-post]

Quoted 13 lines · Xiaoning Ding
Quoted 13 lines
Quoted 1 line

I have tried the p4-clockmod module in Linux kernel

2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems current p4-clockmod driver still cannot support Intel Quad core processors, right?

Quoted 2 lines

I know I can also use acpi-cpufreq. It can only scale

down the frequence from 2.67GHz to 2GHz. But I need some lower frequencies for some experiments.

p4-clockmod doesn't change the processor frequency. Because of common misconceptions like this, the user interface has been removed.

Quoted 7 lines
Quoted 5 lines

In 2.6.29, the clock modulation code is called directly from ACPI
whenever thermal events indicate that throttling is necessary.

Thanks for the correction.
My experiments need to reduce CPU speed. However, I can only reduce the speed by about 30% (from 2.67GHz to 2GHz) with ACPI. That is not enough for the experiments.

The ACPI P-states are nearly always correct, so you won't be able to go below 2GHz on this system.

Quoted 1 line

p4-clockmod has not been removed from 2.6.29. It is under the same directory as acpi-cpufreq (arch/x86/kernel/cpu/cpufreq). So I thought it was an alternative approach. But I could not get it loaded.

The driver is present, the _user interface_ has been removed.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#6 lore raw
Quoted 37 lines · Dave Jones

From: Dave Jones <[email protected]>
Subject: Re: a question about p4_clockmod module on Xeon quad core processors
To: "Xiaoning Ding" <[email protected]>
Cc: [email protected]
Date: Thursday, January 29, 2009, 2:45 AM
[please don't top-post]

Quoted 1 line · Xiaoning Ding
Quoted 1 line
Quoted 1 line

I have tried the p4-clockmod module in

Linux kernel

Quoted 1 line
Quoted 1 line

2.6.29 on Xeon 5355 quad-core CPUs with no luck.

It seems

Quoted 1 line
Quoted 1 line

current p4-clockmod driver still cannot support

Intel Quad

Quoted 3 lines
Quoted 3 lines

core processors, right?

Quoted 2 lines

I know I can also use acpi-cpufreq. It can

only scale

Quoted 1 line
Quoted 1 line

down the frequence from 2.67GHz to 2GHz. But I

need some

Quoted 3 lines
Quoted 3 lines

lower frequencies for some experiments.

p4-clockmod doesn't change the processor

frequency.

Quoted 1 line
Quoted 1 line

Because of common misconceptions like this, the

user

Quoted 3 lines
Quoted 3 lines

interface has been removed.

In 2.6.29, the clock modulation code is called

directly

Quoted 2 lines
Quoted 2 lines

from ACPI
whenever thermal events indicate that throttling

is

Quoted 2 lines
Quoted 2 lines

necessary.

Quoted 8 lines
Quoted 2 lines

Thanks for the correction.
My experiments need to reduce CPU speed. However, I

can only reduce the speed by about 30% (from 2.67GHz to 2GHz) with ACPI. That is not enough for the experiments.

The ACPI P-states are nearly always correct, so you won't be
able to go below 2GHz on this system.

That's true for changing P-States with ACPI. But I can still get slower speed with clock modulation, right?

Quoted 7 lines
Quoted 1 line

p4-clockmod has not been removed from 2.6.29. It is

under the same directory as acpi-cpufreq (arch/x86/kernel/cpu/cpufreq). So I thought it was an alternative approach. But I could not get it loaded.

The driver is present, the _user interface_ has been removed.

The module cannot loaded on Xeon 5355. If I can load it, I hope I can find a method to use it.

Quoted 11 lines

Dave

Signature · 8 lines
http://www.codemonkey.org.uk
--
To unsubscribe from this list: send the line
"unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at 
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
#7 lore raw
Quoted 10 lines · Xiaoning Ding
Quoted 8 lines
Quoted 2 lines

Thanks for the correction.
My experiments need to reduce CPU speed. However, I

can only reduce the speed by about 30% (from 2.67GHz to 2GHz) with ACPI. That is not enough for the experiments.

The ACPI P-states are nearly always correct, so you won't be
able to go below 2GHz on this system.

That's true for changing P-States with ACPI. But I can still get slower speed with clock modulation, right?

Clock modulation will lower the performance, but the clock speed will remain constant.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#8 lore raw
In reply to Dave Jones

Dave Jones wrote:
[]

Quoted 1 line

p4-clockmod doesn't change the processor frequency.

Hmm.. But what it really does, then?
I used it one one machine which had a flaky CPU cooler, to reduce power consumption during hot summer days. It worked, and reportedly the frequency varied from 200MHz to the max of 2.4GHz (it's a P4 Xeon). Now I wonder why it helped to reduce the temperature and why the system reported different frequencies...

Thanks!

Quoted 1 line

Because of common misconceptions like this, the user interface has been removed.

/mjt

#9 lore raw
Quoted 3 lines · Michael Tokarev
Quoted 1 line

p4-clockmod doesn't change the processor frequency.

Hmm.. But what it really does, then?

it modulates the clock so the CPU isn't always availble for doing work.

Quoted 2 lines

I used it one one machine which had a flaky CPU cooler, to reduce power consumption during hot summer days.

it reduces the amount of heat generated, by making jobs take longer to finish. This comes at a cost of the CPU not being able to enter lower C states for longer periods of time, so you may end up actually using *more* power.

Quoted 2 lines

It worked, and reportedly the frequency varied from 200MHz to the max of 2.4GHz (it's a P4 Xeon).

The CPU was always at 2.4GHz, even if it said '200MHz'. It was just only doing work once in every 12 clocks.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#10 lore raw
Quoted 26 lines · Dave Jones

From: Dave Jones <[email protected]>
Subject: Re: a question about p4_clockmod module on Xeon quad core processors
To: "Michael Tokarev" <[email protected]>
Cc: "Xiaoning Ding" <[email protected]>, [email protected]
Date: Thursday, January 29, 2009, 5:24 PM

Quoted 1 line · Michael Tokarev
Quoted 1 line

p4-clockmod doesn't change the processor

frequency.

Quoted 2 lines

Hmm.. But what it really does, then?

it modulates the clock so the CPU isn't always availble for doing work.

Quoted 1 line

I used it one one machine which had a flaky CPU

cooler,

Quoted 1 line

to reduce power consumption during hot summer days.

it reduces the amount of heat generated, by making jobs take longer to finish. This comes at a cost of the CPU not being able to enter lower C states for longer periods of time,
so you may end up actually using *more* power.

Quoted 18 lines
Quoted 2 lines

It worked, and reportedly the frequency varied from 200MHz to the max of 2.4GHz (it's a P4 Xeon).

The CPU was always at 2.4GHz, even if it said '200MHz'.
It was just only doing work once in every 12 clocks.

Dave

Signature · 8 lines
http://www.codemonkey.org.uk
--
To unsubscribe from this list: send the line
"unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at 
http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Thanks for the explanation. So the conclusion is that ACPI-cpufreq can reduce power consumption by lowering cpu frequencies, and p4-clockmod can hardly save power because CPU frequences are not changed.

My experiments do not consider power consumption. It only requires to slow down the speed of some cores by either reducing frequencies or clock modulation. In such case, p4-clockmod is still a good choice for me. Can anyone give me some hints on whether p4-clockmod works on Xeon quad-core processors, and how to get it work?

Thanks!

Xiaoning

#11 lore raw
Quoted 4 lines · Xiaoning Ding

Thanks for the explanation. So the conclusion is that ACPI-cpufreq can reduce power consumption by lowering cpu frequencies, and p4-clockmod can hardly save power because CPU frequences are not changed.

yes. and also that it inhibits entering deeper C states for longer periods.

Quoted 5 lines

My experiments do not consider power consumption. It only requires to slow down the speed of some cores by either reducing frequencies or clock modulation. In such case, p4-clockmod is still a good choice for me. Can anyone give me some hints on whether p4-clockmod works on Xeon quad-core processors, and how to get it work?

I'm not sure if the registers are still there on quad cores, but I would be surprised if they weren't. Hitting them directly with msr tools is probably the best way, or writing a small program that manipulates /dev/cpu/*/msr directly.

Dave

Signature · 1 line
http://www.codemonkey.org.uk
#12 lore raw
In reply to Xiaoning Ding
Quoted 5 lines · Xiaoning Ding

Hi list,

I have tried the p4-clockmod module in Linux kernel 2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems current p4-clockmod driver still cannot support Intel Quad core processors, right?

I know I can also use acpi-cpufreq. It can only scale down the frequence from 2.67GHz to 2GHz. But I need some lower frequencies for some experiments.

Clock modulation is quite simple; in the past I've done it from userspace with /dev/cpu/*/msr or written my own module to do it. I don't know if I've ever tried it on quad-cores, but it worked on dual-core Woodcrest. (Note: I was not trying to save energy.)

Wes Felter - [email protected]

#13 lore raw

I installed msr-tools, but could not find detailed information on how to change cpu speed with the tools. Can you point me to detailed documentations? Or, can you share your code?

Thanks!

Xiaoning

Quoted 23 lines · Wes Felter

From: Wes Felter <[email protected]>
Subject: Re: a question about p4_clockmod module on Xeon quad core processors
To: [email protected]
Cc: [email protected]
Date: Wednesday, January 28, 2009, 9:05 PM

Quoted 3 lines · Xiaoning Ding

Hi list,

I have tried the p4-clockmod module in Linux kernel

2.6.29 on Xeon 5355 quad-core CPUs with no luck. It seems current p4-clockmod driver still cannot support Intel Quad core processors, right?

Quoted 1 line

I know I can also use acpi-cpufreq. It can only scale

down the frequence from 2.67GHz to 2GHz. But I need some lower frequencies for some experiments.

Clock modulation is quite simple; in the past I've done it from userspace with /dev/cpu/*/msr or written my own module to do it. I don't know if I've ever tried it on quad-cores, but it worked on dual-core Woodcrest. (Note:
I was not trying to save energy.)

Wes Felter - [email protected]

#14 lore raw

This will give you an effective speed of 250 MHz:

for cpu in 0 1 2 3; do
cpufreq-set -c $cpu -g userspace
cpufreq-set -c $cpu -u 2.0GHz
wrmsr -p $cpu 0x19A 0x12
done

0x19A is the IA32_CLOCK_MODULATION MSR and 0x12 is calculated from the Intel 64 and IA-32 Architectures Software Developer’s Manual section 13.5.3. Legal MSR values are 0x12 (12.5% duty cycle) - 0x1E (87.5%) or 0x00 for 100%. I tested it on a quad-core Xeon and it works.

This is somewhat reckless, so use it with caution.

Wes Felter - [email protected]

#15 lore raw

It works on my machine. Thanks for the help!

Xiaoning

Quoted 22 lines · Wes Felter

From: Wes Felter <[email protected]>
Subject: Re: a question about p4_clockmod module on Xeon quad core processors
To: [email protected]
Cc: [email protected]
Date: Thursday, January 29, 2009, 8:47 PM
This will give you an effective speed of 250 MHz:

for cpu in 0 1 2 3; do
cpufreq-set -c $cpu -g userspace
cpufreq-set -c $cpu -u 2.0GHz
wrmsr -p $cpu 0x19A 0x12
done

0x19A is the IA32_CLOCK_MODULATION MSR and 0x12 is calculated from the Intel 64 and IA-32 Architectures Software Developer’s Manual section 13.5.3. Legal MSR values are 0x12 (12.5% duty cycle) - 0x1E (87.5%) or 0x00 for 100%. I tested it on a quad-core Xeon and it works.

This is somewhat reckless, so use it with caution.

Wes Felter - [email protected]