2.4.11-pre2-xfs
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines
Hello.
1. hardware Intel ISP1100 (BX/1GB RAM/IDE DISK)
2. kernel 2.4.11-pre2-xfs, with highmem support3. create ramdisk 512Mb and run "tiotest -c -f 110"
And what type of filesystems were used? I am presuming XFS.
Quoted 16 lines
4.
__alloc_pages: 0-order allocation failed (gfp=0x3d0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x2f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x70/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x2f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x70/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x2f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x70/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x3f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x3f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x3f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x70/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x2f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x2f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x70/0) fromc0127fe9
Can you map that address onto a symbol by any chance?
Steve
p.s. [email protected] is a good place to mail things like this, messages posted to just linux-kernel tend to get lost in the noise.
Quoted 12 lines
5. kernel compiled with gdb & have serial console.
Signature · 7 lines
bye. Andrey Nekrasov, SpyLOG. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Quoted 2 lines · Steve Lord
Quoted 1 line
__alloc_pages: 0-order allocation failed (gfp=0x3d0/0) fromc0127fe9Can you map that address onto a symbol by any chance?
ksymoops -A c0127fe9, using ksymoops >= 2.4.3.
Hm, it works for me...
[root@iotest ramdisk]# uname -a
Linux iotest 2.4.11-pre2-xfs #1 SMP Thu Oct 4 14:17:48 CDT 2001 i686 unknown [root@iotest /root]# free
total used free shared buffers cached
Mem: 1028964 56752 972212 0 2092 24800 -/+ buffers/cache: 29860 999104 Swap: 530136 0 530136
[root@iotest /root]# modprobe rd rd_size=600000 rd_blocksize=512 [root@iotest /root]# mkfs.xfs -q -f /dev/ram [root@iotest /root]# mount /dev/ram /mnt/ramdisk/ [root@iotest /root]# cd /mnt/ramdisk/
[root@iotest ramdisk]# /root/tiobench-0.3.1/tiotest -c -f 110 Tiotest results for 4 concurrent io threads:
,----------------------------------------------------------------------.
| Item | Time | Rate | Usr CPU | Sys CPU | +-----------------------+----------+--------------+----------+---------+ | Write 440 MBs | 5.3 s | 83.600 MB/s | 2.3 % | 193.4 % | | Random Write 16 MBs | 0.2 s | 103.333 MB/s | 0.0 % | 198.4 % | | Read 440 MBs | 3.9 s | 114.117 MB/s | 146.5 % | 52.9 % | | Random Read 16 MBs | 0.1 s | 107.574 MB/s | 151.5 % | 41.3 % |
`----------------------------------------------------------------------'
Quoted 9 lines · Andrey Nekrasov
Hello.
1. hardware Intel ISP1100 (BX/1GB RAM/IDE DISK)
2. kernel 2.4.11-pre2-xfs, with highmem support3. create ramdisk 512Mb and run "tiotest -c -f 110" 4.
__alloc_pages: 0-order allocation failed (gfp=0x3d0/0) fromc0127fe9
--
Eric Sandeen XFS for Linux http://oss.sgi.com/projects/xfs
[email protected] SGI, Inc.
Quoted 8 lines
Hello Steve Lord,
Quoted 4 lines
Quoted 2 lines
2. kernel 2.4.11-pre2-xfs, with highmem support
3. create ramdisk 512Mb and run "tiotest -c -f 110"And what type of filesystems were used? I am presuming XFS.
ext2 & xfs , but whis test with ext2
OK, in which case I doubt that the changes XFS has in the kernel will be influencing things - except xfs filesystems elsewhere on the system will have hold of memory, although it should be reclaimable from ext2 just fine.
Quoted 8 lines
Quoted 7 lines
Quoted 7 lines
4.
__alloc_pages: 0-order allocation failed (gfp=0x3d0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x2f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x70/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x2f0/0) fromc0127fe9__alloc_pages: 0-order allocation failed (gfp=0x70/0) fromc0127fe9
Quoted 6 lines
Quoted 1 line
Can you map that address onto a symbol by any chance?
#/ksymoops-2.4.3/ksymoops -A
c0127fe9-m/boot/System.map
...Adhoc
c0127fe8<_alloc_pages+18/20>
Oh well, thats really useful, maybe __alloc_pages should report on its caller's caller.
Quoted 11 lines
6.
...
swap_dup: Bad swap file entry3f41e02c
VM: killing process forwarderngswap_free: Bad swap offset entry3ce50000swap_free: Bad swap file entry3f41e02cswap_free: Bad swap offset entry38bb5000
...
Quoted 1 line
What is it? Kernel or may be my hardware problem?
Probably kernel, but I am not really an expert on this part of the system, is your swap a device or a file on a filesystem?
Quoted 26 lines
7. Interesting result (xfs speed):
buran:~ # cat
ram_disk_ext2
buran:/ramdisk0/tiobench-0.3.1 # while (true) do ./tiotest -c -f 110 ; sleep
60; done
Tiotest results for 4 concurrent io threads:,----------------------------------------------------------------------.
| Item | Time | Rate | Usr CPU | Sys CPU | +-----------------------+----------+--------------+----------+---------+ | Write 440 MBs | 17.9 s | 24.646 MB/s | 0.7 % | 60.8 % | | Random Write 16 MBs | 0.5 s | 28.593 MB/s | 1.8 % | 60.4 % | | Read 440 MBs | 14.1 s | 31.167 MB/s | 28.3 % | 43.6 % | | Random Read 16 MBs | 0.5 s | 33.751 MB/s | 30.2 % | 51.8 % |----------------------------------------------------------------------'
buran:~ # cat
ram_disk_xfs
buran:/ramdisk0/tiobench-0.3.1 # while (true) do ./tiotest -c -f 110 ; sleep
60; done
Tiotest results for 4 concurrent io threads:
Quoted 10 lines
,----------------------------------------------------------------------.
| Item | Time | Rate | Usr CPU | Sys CPU | +-----------------------+----------+--------------+----------+---------+ | Write 440 MBs | 7.9 s | 55.974 MB/s | 1.8 % | 71.4 % | | Random Write 16 MBs | 0.3 s | 45.764 MB/s | 0.0 % | 55.6 % | | Read 440 MBs | 11.1 s | 39.529 MB/s | 38.0 % | 34.3 % | | Random Read 16 MBs | 0.5 s | 32.868 MB/s | 27.3 % | 42.1 % |----------------------------------------------------------------------'
That's good to see,
Thanks
Steve
Quoted 13 lines
Signature · 8 lines
-- bye. Andrey Nekrasov, SpyLOG. - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/