Skip to contentSkip to conversation

ARM: dts: at91-vinco: Fix "status" values

PATCH Applied Rob Herring 3 participants 4 messages Jun 26, 2023 – Aug 2, 2023

Subsystems (2)
lore
Share & tools
lore

Rob Herring

author maintainer
#0 lore raw

PATCH 1/1 ARM: dts: at91-vinco: Fix "status" values

The defined value for "status" is "disabled", not "disable".

---
 arch/arm/boot/dts/microchip/at91-vinco.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/at91-vinco.dts +2 -2
index ebeaa6ab500e..ecbdacf48708 100644
@@ -159,7 +159,7 @@ usb0: gadget@400000 {
 			atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
-			status = "disable";
+			status = "disabled";
 		};
 
 		usb1: ohci@500000 {
@@ -168,7 +168,7 @@ usb1: ohci@500000 {
 					   &pioE 11 GPIO_ACTIVE_LOW
 					   &pioE 12 GPIO_ACTIVE_LOW
 					  >;
-			status = "disable";
+			status = "disabled";
 		};
 
 		usb2: ehci@600000 {
Signature · 7 lines
2.40.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#1 lore raw
Quoted 7 lines · Rob Herring

The defined value for "status" is "disabled", not "disable".

---
 arch/arm/boot/dts/microchip/at91-vinco.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Ping!

Quoted 26 lines
arch/arm/boot/dts/microchip/at91-vinco.dts +2 -3
index ebeaa6ab500e..ecbdacf48708 100644
@@ -159,7 +159,7 @@ usb0: gadget@400000 {
                        atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&pinctrl_usba_vbus>;
-                       status = "disable";
+                       status = "disabled";
                };
 
                usb1: ohci@500000 {
@@ -168,7 +168,7 @@ usb1: ohci@500000 {
                                           &pioE 11 GPIO_ACTIVE_LOW
                                           &pioE 12 GPIO_ACTIVE_LOW
                                          >;
-                       status = "disable";
+                       status = "disabled";
                };
 
                usb2: ehci@600000 {
--

2.40.1

maintainer Acked-by on v1 1/1
#2 lore raw
In reply to Rob Herring
Quoted 5 lines · Rob Herring

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

The defined value for "status" is "disabled", not "disable".

We'll queue the patch in our tree (and linux-next) soon (tm). Best regards,
Nicolas

Quoted 29 lines
---
  arch/arm/boot/dts/microchip/at91-vinco.dts | 4 ++--
  1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/microchip/at91-vinco.dts +2 -3
index ebeaa6ab500e..ecbdacf48708 100644
@@ -159,7 +159,7 @@ usb0: gadget@400000 {
                         atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
                         pinctrl-names = "default";
                         pinctrl-0 = <&pinctrl_usba_vbus>;
-                       status = "disable";
+                       status = "disabled";
                 };
 
                 usb1: ohci@500000 {
@@ -168,7 +168,7 @@ usb1: ohci@500000 {
                                            &pioE 11 GPIO_ACTIVE_LOW
                                            &pioE 12 GPIO_ACTIVE_LOW
                                           >;
-                       status = "disable";
+                       status = "disabled";
                 };
 
                 usb2: ehci@600000 {
--

2.40.1

maintainer Applied
#3 lore raw
Quoted 4 lines · Nicolas Ferre
Quoted 3 lines · Rob Herring

EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe

Quoted 8 lines
Quoted 3 lines

The defined value for "status" is "disabled", not "disable".

We'll queue the patch in our tree (and linux-next) soon (tm). Best regards,
  Nicolas

Applied to at91-dt, thanks!