arm64: dts: rockchip: fix dwmmc clock name for px30 and rk3308
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: fix dwmmc clock name for px30 and rk3308
An experimental test with the command below gives this error:px30-evb.dt.yaml: dwmmc@ff390000: clock-names:2:
'ciu-drive' was expectedrk3308-evb.dt.yaml: dwmmc@ff480000: clock-names:2:
'ciu-drive' was expected
'ciu-drv' is not a valid dwmmc clock name,
so fix this by changing it to 'ciu-drive'.
make ARCH=arm64 dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
--- arch/arm64/boot/dts/rockchip/px30.dtsi | 6 +++--- arch/arm64/boot/dts/rockchip/rk3308.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-)
arch/arm64/boot/dts/rockchip/px30.dtsi +3 -3
@@ -885,7 +885,7 @@ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
@@ -900,7 +900,7 @@ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
@@ -915,7 +915,7 @@ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
arch/arm64/boot/dts/rockchip/rk3308.dtsi +3 -3
@@ -591,7 +591,7 @@ bus-width = <4>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
@@ -606,7 +606,7 @@ bus-width = <8>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; status = "disabled";
@@ -619,7 +619,7 @@ bus-width = <4>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default";
Signature · 1 line
2.11.0
Heiko Stuebner
maintainerHi Johan,
Am Freitag, 10. Januar 2020, 17:12:00 CET schrieb Johan Jonker:
Quoted 6 lines
An experimental test with the command below gives this error:
px30-evb.dt.yaml: dwmmc@ff390000: clock-names:2:
'ciu-drive' was expectedrk3308-evb.dt.yaml: dwmmc@ff480000: clock-names:2:
'ciu-drive' was expected
Quoted 7 lines
'ciu-drv' is not a valid dwmmc clock name,
so fix this by changing it to 'ciu-drive'.make ARCH=arm64
dtbs_checkDT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yamlSigned-off-by Johan Jonker <[email protected]>
thanks for this fix, I've split it into two patches (px30 and rk3308) and applied for 5.6
Thanks
Heiko