Skip to contentSkip to conversation

Reading a bad sector does not report failure as 'read error' but hangs PC with 'Machine Check Exception'

DISCUSSION Hendrik . 2 participants 2 messages Jul 30, 2007 – Aug 1, 2007

lore
Share & tools
lore

Hendrik .

author
#0 lore raw

After even more tests I found out the following:

- Running 'dd_rescue /dev/sda1 /dev/zero' on the on-board Silicon Image Inc. SiI 3114 controller handles the bad sector just fine and does not give a MCE. This is on the same motherboard that does give the MCE error on the Nvidia port.

The following SATA controllers are in that machine:
* IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
* RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)

- Running the dd_rescue command om another PC with a different type of motherboard (M2NPV-VM) also with a Nvidia Nforce 4 (altough different) chipset work fine and reports the bad sector like the SiL 3114 controller on the other PC.

This PC has the following lspci listing for SATA controller:
* IDE interface: nVidia Corporation MCP51 Serial ATA Controller (rev a1)

So I think there is a problem with this specific CK804 ATA controller causing the MCE... Any clues?

____________________________________________________________________________________
Be a better Heartthrob. Get better relationship answers from someone who knows. Yahoo! Answers - Check it out.
http://answers.yahoo.com/dir/?link=list&sid=396545433

#1 lore raw
Quoted 2 lines · Hendrik .

So I think there is a problem with this specific CK804 ATA controller causing the MCE... Any clues?

Yes, the SATA chip is broken. Probably time to check the known errata on the chip, and if it isn't known, bring nvidia in to debug their silicon.