Skip to contentSkip to conversation

arm64: dts: r8a7795: Drop bogus HDMI node names suffixes

PATCH New Geert Uytterhoeven 3 participants 3 messages Aug 30, 2017 – Aug 31, 2017

Subsystems (2)
Device tree bindings Arm/RISC-V/Renesas architecture
lore
Share & tools
lore

Geert Uytterhoeven

author maintainer
#0 lore raw

PATCH 1/1 arm64: dts: r8a7795: Drop bogus HDMI node names suffixes

Node names should not use numerical suffixes if the nodes can be distinguished by unit-address.

Signed-off-by Geert Uytterhoeven <[email protected]>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm64/boot/dts/renesas/r8a7795.dtsi +2 -2
index 8b4dbce860001224..e1ced54d11322cb4 100644
@@ -2702,7 +2702,7 @@
 			renesas,fcp = <&fcpf1>;
 		};
 
-		hdmi0: hdmi0 at fead0000 {
+		hdmi0: hdmi at fead0000 {
 			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
 			reg = <0 0xfead0000 0 0x10000>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;

@@ -2727,7 +2727,7 @@
 			};
 		};
 
-		hdmi1: hdmi1 at feae0000 {
+		hdmi1: hdmi at feae0000 {
 			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
 			reg = <0 0xfeae0000 0 0x10000>;
 			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.7.4
#1 lore raw

PATCH 1/1 arm64: dts: r8a7795: Drop bogus HDMI node names suffixes

Hi Geert,

Thank you for the patch.

Quoted 4 lines · On Wednesday, 30 August 2017 13:03:17 EEST Geert Uytterhoeven wrote:

Node names should not use numerical suffixes if the nodes can be distinguished by unit-address.

Signed-off-by Geert Uytterhoeven <[email protected]>
Acked-by Laurent Pinchart <[email protected]>
Quoted 27 lines
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
(quoted diff) +0 -0

b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index
8b4dbce860001224..e1ced54d11322cb4 100644

arch/arm64/boot/dts/renesas/r8a7795.dtsi +2 -2
@@ -2702,7 +2702,7 @@
 			renesas,fcp = <&fcpf1>;
 		};
 
-		hdmi0: hdmi0@fead0000 {
+		hdmi0: hdmi@fead0000 {
 			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
 			reg = <0 0xfead0000 0 0x10000>;
 			interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;

@@ -2727,7 +2727,7 @@
 			};
 		};
 
-		hdmi1: hdmi1@feae0000 {
+		hdmi1: hdmi@feae0000 {
 			compatible = "renesas,r8a7795-hdmi", "renesas,rcar-gen3-hdmi";
 			reg = <0 0xfeae0000 0 0x10000>;
 			interrupts = <GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>;
Signature · 3 lines
Regards,

Laurent Pinchart
Applied
#2 lore raw

PATCH 1/1 arm64: dts: r8a7795: Drop bogus HDMI node names suffixes

Quoted 11 lines · Laurent Pinchart

Hi Geert,

Thank you for the patch.

Quoted 4 lines · On Wednesday, 30 August 2017 13:03:17 EEST Geert Uytterhoeven wrote:

Node names should not use numerical suffixes if the nodes can be distinguished by unit-address.

Signed-off-by Geert Uytterhoeven <[email protected]>
Acked-by Laurent Pinchart <[email protected]>

Thanks, applied.