ARM: dts: rockchip: add gpio-ir-receiver to the R89 board
Subsystems (2)
Heiko Stübner
maintainerPATCH 1/1 ARM: dts: rockchip: add gpio-ir-receiver to the R89 board
Add support for the IR receiver present on the R89 board.
Signed-off-by Heiko Stuebner <[email protected]>
--- arch/arm/boot/dts/rk3288-r89.dts | 13 +++++++++++++ 1 file changed, 13 insertions(+)
arch/arm/boot/dts/rk3288-r89.dts +13 -0
@@ -78,6 +78,13 @@ }; }; + ir: ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_int>; + }; + vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; enable-active-high;
@@ -310,6 +317,12 @@ }; }; + ir { + ir_int: ir-int { + rockchip,pins = <7 0 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pmic { pmic_int: pmic-int { rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO &pcfg_pull_up>;
Signature · 1 line
2.6.1
PATCH 1/1 ARM: dts: rockchip: add gpio-ir-receiver to the R89 board
Am Freitag, 27. November 2015, 23:53:35 schrieb Heiko St?bner:
Quoted 3 lines
Add support for the IR receiver present on the R89 board.
Signed-off-by Heiko Stuebner <[email protected]>
applied to my dts32 branch for 4.5