dt-bindings: i2c: nxp,lpc1788-i2c: convert to dt schema
PATCH v3 1/1 dt-bindings: i2c: nxp,lpc1788-i2c: convert to dt schema
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file which had compatible, reg, interrupts, clocks, #address-cells and #size-cells as required properties.
Additional changes to the original .txt binding
- added maintainer from the MAINTAINERS file.
- added resets property required by the corresponding DTS files.
---
Changes in v3:
- removed "address-cells" and "size-cells" as per feedback. Changes in v2:
- updated subject line to include device name.
- changed removed description from properties except clock-frequency.
- updated MAINTAINERS to track this file.
--- .../devicetree/bindings/i2c/i2c-lpc2k.txt | 33 ------------ .../bindings/i2c/nxp,lpc1788-i2c.yaml | 54 +++++++++++++++++++ MAINTAINERS | 2 +- 3 files changed, 55 insertions(+), 34 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt create mode 100644 Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml
Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt deleted +0 -33
@@ -1,33 +0,0 @@ -NXP I2C controller for LPC2xxx/178x/18xx/43xx - -Required properties: - - compatible: must be "nxp,lpc1788-i2c" - - reg: physical address and length of the device registers - - interrupts: a single interrupt specifier - - clocks: clock for the device - - #address-cells: should be <1> - - #size-cells: should be <0> - -Optional properties: -- clock-frequency: the desired I2C bus clock frequency in Hz; in - absence of this property the default value is used (100 kHz). - -Example: -i2c0: i2c@400a1000 { - compatible = "nxp,lpc1788-i2c"; - reg = <0x400a1000 0x1000>; - interrupts = <18>; - clocks = <&ccu1 CLK_APB1_I2C0>; - #address-cells = <1>; - #size-cells = <0>; -}; - -&i2c0 { - clock-frequency = <400000>; - - lm75@48 { - compatible = "nxp,lm75"; - reg = <0x48>; - }; -}; -
Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml new file +54 -0
54 lines not on this page · raw message
MAINTAINERS +1 -1
@@ -2374,7 +2374,7 @@ ARM/LPC18XX ARCHITECTURE M: Vladimir Zapolskiy <[email protected]> L: [email protected] (moderated for non-subscribers) S: Maintained -F: Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt +F: Documentation/devicetree/bindings/i2c/nxp,lpc1788-i2c.yaml F: arch/arm/boot/dts/nxp/lpc/lpc43* F: drivers/i2c/busses/i2c-lpc2k.c F: drivers/memory/pl172.c
Signature · 1 line
2.45.2
Quoted 9 lines · Kanak Shilledar
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file which had
compatible,reg,interrupts,clocks,#address-cellsand#size-cellsas required properties.Additional changes to the original .txt binding
- added maintainer from theMAINTAINERSfile.
- added resets property required by the corresponding DTS files.
Quoted 5 lines
Reviewed-by Krzysztof Kozlowski <[email protected]>Signed-off-by Kanak Shilledar <[email protected]>---
Changes in v3:
- removed "address-cells" and "size-cells" as per feedback.
you already sent v3 so this is rather v4. What happened here? Why are you resending this?
<form letter>
This is a friendly reminder during the review process.
Please add Acked-by/Reviewed-by/Tested-by tags when posting new versions, under or above your Signed-off-by tag. Tag is "received", when provided in a message replied to you on the mailing list. Tools like b4 can help here. However, there's no need to repost patches *only* to add the tags. The upstream maintainer will do that for tags received on the version they apply.
https://elixir.bootlin.com/linux/v6.5-rc3/source/Documentation/process/submitting-patches.rst#L577
If a tag was not added on purpose, please state why and what changed. </form letter>
Best regards,
Krzysztof
Quoted 10 lines · Krzysztof Kozlowski
Quoted 9 lines · Kanak Shilledar
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file which had
compatible,reg,interrupts,clocks,#address-cellsand#size-cellsas required properties.Additional changes to the original .txt binding
- added maintainer from theMAINTAINERSfile.
- added resets property required by the corresponding DTS files.
Quoted 8 lines
Quoted 5 lines
Reviewed-by Krzysztof Kozlowski <[email protected]>Signed-off-by Kanak Shilledar <[email protected]>---
Changes in v3:
- removed "address-cells" and "size-cells" as per feedback.you already sent v3 so this is rather v4. What happened here? Why are you resending this?
Ah, I see the changes - you dropped the incorrect tags. It's fine but it should have been v4. Not sure how b4 or other tools will handle this.
Best regards,
Krzysztof
Quoted 12 lines · Krzysztof Kozlowski
Quoted 10 lines · Krzysztof Kozlowski
Quoted 9 lines · Kanak Shilledar
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file
- added maintainer from theMAINTAINERSfile.
- added resets property required by the corresponding DTS files.Reviewed-by Krzysztof Kozlowski <[email protected]>Signed-off-by Kanak Shilledar <[email protected]>---
Changes in v3:
Quoted 5 lines
Quoted 2 lines
you already sent v3 so this is rather v4. What happened here? Why are you resending this?
Ah, I see the changes - you dropped the incorrect tags. It's fine but it should have been v4. Not sure how b4 or other tools will handle this.
I thought there is no need to bump up the version just for changing tags. Shall I resend it as v4 and update the commit message with the change log to include
the removal of kernel bot tags and addition of your review tag?
Quoted 2 lines
Best regards,
Krzysztof
Thanks and Regards,
Kanak Shilledar
Andi Shyti
maintainerQuoted 12 lines · Kanak Shilledar
Quoted 11 lines · Krzysztof Kozlowski
Quoted 10 lines · Krzysztof Kozlowski
Quoted 9 lines · Kanak Shilledar
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file
- added maintainer from theMAINTAINERSfile.
- added resets property required by the corresponding DTS files.Reviewed-by Krzysztof Kozlowski <[email protected]>Signed-off-by Kanak Shilledar <[email protected]>---
Changes in v3:
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
you already sent v3 so this is rather v4. What happened here? Why are you resending this?
Ah, I see the changes - you dropped the incorrect tags. It's fine but it should have been v4. Not sure how b4 or other tools will handle this.
why should b4 complain? I fetch it from the mail-id. And even if b4 complains, good old git-am still works :-)
Quoted 1 line
I thought there is no need to bump up the version just for changing tags.
You should increase the version number for every single change, even trivial changes in the commit log. If you are sending again the same patch (which means that you are git-sending the same .patch file without any change), then you should tag it as [PATCH RESEND].
Quoted 3 lines
Shall I resend it as v4 and update the commit message with the change log to include
the removal of kernel bot tags and addition of your review tag?
No need, your patch has been added to i2c/i2c-host.
Thanks,
Andi
Quoted 5 lines
Quoted 2 lines
Best regards,
KrzysztofThanks and Regards,
Kanak Shilledar
Quoted 31 lines · Andi Shyti
Quoted 12 lines · Kanak Shilledar
Quoted 11 lines · Krzysztof Kozlowski
Quoted 10 lines · Krzysztof Kozlowski
Quoted 9 lines · Kanak Shilledar
Convert the NXP I2C controller for LPC2xxx/178x/18xx/43xx to newer DT schema. Created DT schema based on the .txt file
- added maintainer from theMAINTAINERSfile.
- added resets property required by the corresponding DTS files.Reviewed-by Krzysztof Kozlowski <[email protected]>Signed-off-by Kanak Shilledar <[email protected]>---
Changes in v3:Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
you already sent v3 so this is rather v4. What happened here? Why are you resending this?
Ah, I see the changes - you dropped the incorrect tags. It's fine but it should have been v4. Not sure how b4 or other tools will handle this.
why should b4 complain? I fetch it from the mail-id. And even if b4 complains, good old git-am still works :-)
Quoted 1 line
I thought there is no need to bump up the version just for changing tags.
You should increase the version number for every single change, even trivial changes in the commit log. If you are sending again the same patch (which means that you are git-sending the same .patch file without any change), then you should tag it as [PATCH RESEND].
Quoted 5 lines
Quoted 3 lines
Shall I resend it as v4 and update the commit message with the change log to include
the removal of kernel bot tags and addition of your review tag?No need, your patch has been added to i2c/i2c-host.
Thanks for the clarification
Quoted 8 lines
Thanks,
AndiQuoted 5 lines
Quoted 2 lines
Best regards,
KrzysztofThanks and Regards,
Kanak Shilledar
Thanks and Regards,
Kanak Shilledar