Skip to contentSkip to conversation

ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM

PATCH In review Marek Vasut 2 participants 2 messages Oct 29, 2020 – Nov 9, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: dts: stm32: Keep VDDA LDO1 always on on DHCOM

The VDDA LDO1 PMIC output supplies the analog VDDA input of the STM32MP1 on DHCOM, keep it always on, otherwise there could be leakage through the SoC.

Fixes 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>

To: [email protected]

---
 arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +1 -0
index 9caa0dfc7b22..51c329ce2f00 100644
@@ -256,6 +256,7 @@ v3v3: buck4 {
 
 			vdda: ldo1 {
 				regulator-name = "vdda";
+				regulator-always-on;
 				regulator-min-microvolt = <2900000>;
 				regulator-max-microvolt = <2900000>;
 				interrupts = <IT_CURLIM_LDO1 0>;
Signature · 7 lines
2.28.0


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw

Hi Marek

Quoted 22 lines · Marek Vasut

The VDDA LDO1 PMIC output supplies the analog VDDA input of the STM32MP1 on DHCOM, keep it always on, otherwise there could be leakage through the SoC.

Fixes 34e0c7847dcf ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Cc Alexandre Torgue <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Patrice Chotard <[email protected]>
Cc Patrick Delaunay <[email protected]>

To: [email protected]

---
  arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi | 1 +
  1 file changed, 1 insertion(+)
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +0 -0
index 9caa0dfc7b22..51c329ce2f00 100644

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi v3v3: buck4 { · line 262

Quoted 7 lines
arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi +1 -0
@@ -256,6 +256,7 @@ v3v3: buck4 {
 
  			vdda: ldo1 {
  				regulator-name = "vdda";
+				regulator-always-on;
  				regulator-min-microvolt = <2900000>;
  				regulator-max-microvolt = <2900000>;
  				interrupts = <IT_CURLIM_LDO1 0>;

Applied on stm32-dt-for-v5.10-fixes.

regards
alex

_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel