Fix few small typos in lpfc_scsi.c
Subsystems (3)
PATCH 1/1 Fix few small typos in lpfc_scsi.c
This patch does a cleanup and fixes few small typos in lpfc_scsi.c
---
drivers/scsi/lpfc/lpfc_scsi.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
drivers/scsi/lpfc/lpfc_scsi.c +12 -9
@@ -607,7 +607,7 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba, }/** -* lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a list +* lpfc_sli4_post_scsi_sgl_list - Post blocks of scsi buffer sgls from a list * @phba: pointer to lpfc hba data structure. * @post_sblist: pointer to the scsi buffer list. *
@@ -736,7 +736,7 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, }/** -* lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer sgls +* lpfc_sli4_repost_scsi_sgl_list - Repost all the allocated scsi buffer sgls * @phba: pointer to lpfc hba data structure. * * This routine walks the list of scsi buffers that have been allocated and
@@ -857,7 +857,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) psb->data, psb->dma_handle);kfree (psb);lpfc_printf_log (phba,KERN_ERR ,LOG_FCP , -"3368 Failed to allocated IOTAG for" +"3368 Failed to allocate IOTAG for" " XRI:0x%x\n" , lxri);lpfc_sli4_free_xri (phba, lxri);break ;
@@ -1136,7 +1136,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)* * This routine does the pci dma mapping for scatter-gather list of scsi cmnd * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans -* through sg elements and format the bdea. This routine also initializes all +* through sg elements and format the bde. This routine also initializes all * IOCB fields which are dependent on scsi command request buffer. * * Return codes:
@@ -1269,13 +1269,16 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)#ifdef CONFIG_SCSI_LPFC_DEBUG_FS -/* Return if if error injection is detected by Initiator */ +/* Return BG_ERR_INIT if error injection is detected by Initiator */ #define BG_ERR_INIT 0x1 -/* Return if if error injection is detected by Target */ +/* Return BG_ERR_TGT if error injection is detected by Target */ #define BG_ERR_TGT 0x2 -/* Return if if swapping CSUM<-->CRC is required for error injection */ +/* Return BG_ERR_SWAP if swapping CSUM<-->CRC is required for error injection */ #define BG_ERR_SWAP 0x10 -/* Return if disabling Guard/Ref/App checking is required for error injection */ +/** +* Return BG_ERR_CHECK if disabling Guard/Ref/App checking is required for +* error injection +**/ #define BG_ERR_CHECK 0x20/**
@@ -4822,7 +4825,7 @@ wait_for_cmpl: ret =FAILED ;lpfc_printf_vlog (vport,KERN_ERR ,LOG_FCP ,"0748 abort handler timed out waiting " -"for abortng I/O (xri:x%x) to complete: " +"for aborting I/O (xri:x%x) to complete: " "ret %#x, ID %d, LUN %llu\n" , iocb->sli4_xritag, ret, cmnd->device->id, cmnd->device->lun);
----- Original Message -----
Quoted 97 lines
From: "Milan P. Gandhi" <[email protected]>
To: [email protected], [email protected], "james smart" <[email protected]>, "dick kennedy" <[email protected]>
Sent: Sunday, September 25, 2016 11:58:41 AM
Subject: [PATCH] Fix few small typos inlpfc_scsi.cThis patch does a cleanup and fixes few small typos in
lpfc_scsi.cSigned-off-by Milan P. Gandhi <[email protected]>---
drivers/scsi/lpfc/lpfc_scsi.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)drivers/scsi/lpfc/lpfc_scsi.c +0
-1@@ -607,7 +607,7 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba, }/** -* lpfc_sli4_post_scsi_sgl_list - Psot blocks of scsi buffer sgls from a list
+ *lpfc_sli4_post_scsi_sgl_list- Post blocks of scsi buffer sgls from a list
* @phba: pointer to lpfc hba data structure.
* @post_sblist: pointer to the scsi buffer list.
*drivers/scsi/lpfc/lpfc_scsi.c +0
-1@@ -736,7 +736,7 @@ lpfc_sli4_post_scsi_sgl_list(struct lpfc_hba *phba, }/** -* lpfc_sli4_repost_scsi_sgl_list - Repsot all the allocated scsi buffer sgls
+ *lpfc_sli4_repost_scsi_sgl_list- Repost all the allocated scsi buffer sgls
* @phba: pointer to lpfc hba data structure.
*
* This routine walks the list of scsi buffers that have been allocated anddrivers/scsi/lpfc/lpfc_scsi.c +1
-1@@ -857,7 +857,7 @@ lpfc_new_scsi_buf_s4(struct lpfc_vport *vport, int num_to_alloc) psb->data, psb->dma_handle);kfree (psb);lpfc_printf_log (phba,KERN_ERR ,LOG_FCP , -"3368 Failed to allocated IOTAG for" +"3368 Failed to allocate IOTAG for" " XRI:0x%x\n" , lxri);lpfc_sli4_free_xri (phba, lxri);drivers/scsi/lpfc/lpfc_scsi.c +0
-1break ;@@ -1136,7 +1136,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb) * * This routine does the pci dma mapping for scatter-gather list of scsi cmnd * field of @lpfc_cmd for device with SLI-3 interface spec. This routine scans - * through sg elements and format the bdea. This routine also initializesall
+ * through sg elements and format the bde. This routine also initializes all
* IOCB fields which are dependent on scsi command request buffer. *
* Return codes:drivers/scsi/lpfc/lpfc_scsi.c +3
-3@@ -1269,13 +1269,16 @@ lpfc_scsi_prep_dma_buf_s3(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)#ifdef CONFIG_SCSI_LPFC_DEBUG_FS -/* Return if if error injection is detected by Initiator */ +/* Return BG_ERR_INIT if error injection is detected by Initiator */ #define BG_ERR_INIT 0x1 -/* Return if if error injection is detected by Target */ +/* Return BG_ERR_TGT if error injection is detected by Target */ #define BG_ERR_TGT 0x2 -/* Return if if swapping CSUM<-->CRC is required for error injection */ +/* Return BG_ERR_SWAP if swapping CSUM<-->CRC is required for error injection */
#defineBG_ERR_SWAP0x10
-/* Return if disabling Guard/Ref/App checking is required for error injection */drivers/scsi/lpfc/lpfc_scsi.c +5
-2+/** +* Return BG_ERR_CHECK if disabling Guard/Ref/App checking is required for +* error injection +**/ #define BG_ERR_CHECK 0x20/** @@ -4822,7 +4825,7 @@ wait_for_cmpl: ret =FAILED ;lpfc_printf_vlog (vport,KERN_ERR ,LOG_FCP ,"0748 abort handler timed out waiting " -"for abortng I/O (xri:x%x) to complete: " +"for aborting I/O (xri:x%x) to complete: " "ret %#x, ID %d, LUN %llu\n" , iocb->sli4_xritag, ret, cmnd->device->id, cmnd->device->lun); --
Quoted 4 lines
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Looks good to me
Reviewed-by Laurence Oberman <[email protected]>