Skip to contentSkip to conversation

mapping flash memory

U-Boot-Users MARCO LUFFARELLI 3 participants 3 messages Mar 16, 2006 – Mar 17, 2006

lore
Share & tools
lore
#0 lore raw

I have a new board based on s3c2410a. I have mounted 2 banks of samsung ram k4s283233f and 1 bank of flash memory k9f2808uoc samsung. total size of ram is 256Mbit organized in two bank (128Mbitx2). Total flash is 128Mbit. I need a help to configure the u-boot. How and what i can cange in the original file of u-boot version 1.1.4 to setting flash memory and 2 banks of ram?I think modify the boot for smdk2410 and porting this to my board, what do you think about?you now another way ?

thanks
Marco
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.denx.de/pipermail/u-boot/attachments/20060316/78dbf0c0/attachment.htm

#2 lore raw
Quoted 3 lines · In message <[email protected]> you wrote:

I?ve a similar problem with my AM29LV160D FLASH! I don??t know how to initialize it!

I suggest you start reading the chip documentation, and then the U-Boot documentation and source code.

Quoted 1 line

Has anyone experience with this FLASH?

This is standard flash which is in use in more than 50 boards both with custom drivvers and with the CFI driver. There is no tricky part involved.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
The existence of god implies a violation of causality.