Skip to contentSkip to conversation

iio: humidity: Add driver for TI HDC302x humidity sensors

PATCH In review Javier Carrasco 1 participant 3 messages Dec 5, 2023 IIO

lore
Share & tools
lore
#0 lore raw

v2 cover iio: humidity: Add driver for TI HDC302x humidity sensors

Updated version of my modifications. From my side the series is ready for a new version to send upstream.

Feel free to add any improvements or discuss any of my modifications.

---
Changes in v2:
- Drop IIO_CHAN_INFO_PEAK_SCALE. It was discussed with Jonathan Cameron and this modifier will only be required if its value overrides the _SCALE value.
- Document the new _TROUGH modifier.
- Fix heater configuration order: config value and then enable.

---
Javier Carrasco (2):
iio: core: introduce trough modifier for minimum values
iio: ABI: document temperature and humidity peak/trough raw attributes

Li peiyu (2):
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for TI HDC302x humidity sensors

 Documentation/ABI/testing/sysfs-bus-iio            |  13 +-
 .../bindings/iio/humidity/ti,hdc3020.yaml          |  55 +++
 MAINTAINERS                                        |   8 +
 drivers/iio/humidity/Kconfig                       |  12 +
 drivers/iio/humidity/Makefile                      |   1 +
 drivers/iio/humidity/hdc3020.c                     | 468 +++++++++++++++++++++
 drivers/iio/industrialio-core.c                    |   1 +
 include/linux/iio/types.h                          |   1 +
 8 files changed, 558 insertions(+), 1 deletion(-)

---
base-commit: 33cc938e65a98f1d29d0a18403dbbee050dcad9a
change-id: 20231130-hdc302x-59b8a9c312b0

Best regards,

Signature · 1 line
Javier Carrasco <[email protected]>
#1 lore raw

PATCH v2 2/4 iio: ABI: document temperature and humidity peak/trough raw attributes

The in_temp_peak_raw attribute is already in use, but its documentation is still missing. The in_humidityrelative_raw must be documented for a new iio user that supports this attribute. Add temp and humidityrelative use cases.
When at it, remove an extra blank space in the description.

For users that support minimum values, a new in_<type>_trough_raw attribute is required. Add this attribute and document the first uses of it for temp and humidityrelative types.

---
 Documentation/ABI/testing/sysfs-bus-iio | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)
Documentation/ABI/testing/sysfs-bus-iio +12 -1
index 19cde14f3869..dc1c7df6a19c 100644
@@ -362,10 +362,21 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_peak_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_peak_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_peak_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_peak_raw
 KernelVersion:	2.6.36
 Contact:	[email protected]
 Description:
-		Highest value since some reset condition.  These
+		Highest value since some reset condition. These
+		attributes allow access to this and are otherwise
+		the direct equivalent of the <type>Y[_name]_raw attributes.
+
+What:		/sys/bus/iio/devices/iio:deviceX/in_humidityrelative_trough_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_trough_raw
+KernelVersion:	6.7
+Contact:	[email protected]
+Description:
+		Lowest value since some reset condition. These
 		attributes allow access to this and are otherwise
 		the direct equivalent of the <type>Y[_name]_raw attributes.
 
Signature · 1 line
2.39.2
#2 lore raw
In reply to Javier Carrasco

Sorry, this was not meant to be sent to the mailing list yet, please ignore.

Quoted 37 lines · Javier Carrasco

Updated version of my modifications. From my side the series is ready for a new version to send upstream.

Feel free to add any improvements or discuss any of my modifications.

---
Changes in v2:
- Drop IIO_CHAN_INFO_PEAK_SCALE. It was discussed with Jonathan Cameron and this modifier will only be required if its value overrides the _SCALE value.
- Document the new _TROUGH modifier.
- Fix heater configuration order: config value and then enable.

---
Javier Carrasco (2):
iio: core: introduce trough modifier for minimum values
iio: ABI: document temperature and humidity peak/trough raw attributes

Li peiyu (2):
dt-bindings: iio: humidity: Add TI HDC302x support
iio: humidity: Add driver for TI HDC302x humidity sensors

 Documentation/ABI/testing/sysfs-bus-iio            |  13 +-
 .../bindings/iio/humidity/ti,hdc3020.yaml          |  55 +++
 MAINTAINERS                                        |   8 +
 drivers/iio/humidity/Kconfig                       |  12 +
 drivers/iio/humidity/Makefile                      |   1 +
 drivers/iio/humidity/hdc3020.c                     | 468 +++++++++++++++++++++
 drivers/iio/industrialio-core.c                    |   1 +
 include/linux/iio/types.h                          |   1 +
 8 files changed, 558 insertions(+), 1 deletion(-)

---
base-commit: 33cc938e65a98f1d29d0a18403dbbee050dcad9a
change-id: 20231130-hdc302x-59b8a9c312b0

Best regards,