throttle lan client only
I have the below example working on tagging a "source" and throttling all the clients for traffic control. However, I need to throttle a specific client on the lan side only. The solution could be with or with out the use of iptables, it doesn't matter.
this works: eth0=wan eth1=lan
---------------------------------------------------------------------------
###############################################################
# tag all incoming SYN packets through $DEV as mark value 1 ###############################################################
iptables --append PREROUTING --in-interface eth0 --table mangle \
--protocol tcp --source download.fedora.redhat.com \
--source-port 1:65535 \
--jump MARK --set-mark 0x1############################################################
# install the ingress qdisc on the ingress interface ############################################################ tc qdisc add dev eth0 handle ffff: ingress
############################################################ # utilize ingress qdisc ############################################################ tc filter add dev eth0 parent ffff: protocol ip prio 50 handle \ 0x1 fw police rate 1kbit burst 1500 mtu 9k drop flowid :0x1
---------------------------------------------------------------------------
I have tried several options, some of which were to simply add the --destination option to the iptables statement. Others are a mix of experimental tc cmds. I am not having success.
Any help would be most appreciated.
Thank You
--Karl
MailKey: GUINNESS
_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/