Comedi device layered on top of FT232RL
Hi LKML,
right now i try to understand if the following thing is possible:
I have an embedded device with an FT232RL interface which gets handled by ftdi_ser.ko. I can with userspace tools talk to it over /dev/ttyUSB0. The device control some digital inputs/outputs and some ADC/DACs. All is handled over a serial protocol.
I thought about following options:
1.Userspace daemon which sits on /dev/ttyUSB0
Pro: Easy to implement
Con: It would not be an comedi device and thus not able to use the
comedi features
2.Kernel driver:
Pro: It would be possible to use the comedi interface
Con: I would duplicate much of the code used for ftdi_ser.ko.
OFC i would like to avoid code duplication but i would like to use the features and interface from comedi.
What is the recommended way to solve such issue?
I tried to look through the comedi drivers and found the usbdux. It uses usb urbs to talk to its hardware. I tried to find a hint in LDD3 book but i just got hints about talking with it with urbs. That is why i came to option 2 (but i see the cons).
The driver would just add the parsing of the stream. Convert the comedi calls to a stream for the device. That is in fact the thing i want to put under the hood of comedi.
Best Regards
Georg
Quoted 14 lines · On Tue, 25 Nov 2014 15:39:28 +0100 [email protected] wrote:
Hi LKML,
right now i try to understand if the following thing is possible:I have an embedded device with an FT232RL interface which gets handled by ftdi_ser.ko. I can with userspace tools talk to it over
/dev/ttyUSB0. The device control some digital inputs/outputs and some ADC/DACs. All is handled over a serial protocol.I thought about following options:
1.Userspace daemon which sits on/dev/ttyUSB0
Pro: Easy to implement
Con: It would not be an comedi device and thus not able to use the
comedi features
Quoted 8 lines
2.Kernel driver:
Pro: It would be possible to use the comedi interface
Con: I would duplicate much of the code used for ftdi_ser.ko.OFC i would like to avoid code duplication but i would like to use the features and interface from comedi.
What is the recommended way to solve such issue?
That depends a lot on the protocol and interface. If the Comedi interface over the ftdi is a serial protocol then the right way to use it is to write a line discipline. It can then sit on top of the existing serial drivers and will also conveniently work with any other kind of tty serial driver (or even ptys) which can be useful if you need to remote control devices etc.
Alan