Skip to contentSkip to conversation

How to configure the snmp trap

DISCUSSION xiuzhi 2 participants 2 messages Aug 29, 2019 – Aug 31, 2019 1 message not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw
Quoted 3 lines · xiuzhi

Hi Ratan,
  I am try to test the snmp trap feature on openbmc 2.8.0-dev.
There is no more snmp util commands such as snmptrap etc. expect   phosphor-network-snmpconf .

You need to configure the snmp trap endpoint via the REST api(phosphor-rest-server),Please look at the configuration command at the following link

https://github.com/openbmc/phosphor-snmp/blob/master/docs/snmp-configuration.md

We also had a configuration in phosphor-dbus-monitor where it is configured that for which D-bus event, snmp traps need to be sent.

https://github.com/openbmc/phosphor-dbus-monitor/blob/master/src/example/example.yaml

phosphor-dbus-monitor, monitors the D-bus event, and as per the phosphor-event configuration,snmp trap is  sent.

Once you configure the SNMP trap endpoint and the phosphor-dbus-event then you need to run the  snmptrapd outside the BMC to receive the SNMP traps .

You may run the snmptrapd inside the BMC also.

NOTE: Make sure that wherever you are running the snmptrapd, firewall is not blocking the packets.

Quoted 6 lines

The document ,
  https://github.com/openbmc/phosphor-snmp/blob/master/docs/snmp-configuration.md ,  does not guide me to do the snmp trap test. Would you like to give me a detail instruction to do the snmp trap test?

Best,
Xiuzhi