ath10k-firmware: QCA9888 hw2.0: Add BDF for Linksys EA8300 [2/2]
PATCH v2 1/1 ath10k-firmware: QCA9888 hw2.0: Add BDF for Linksys EA8300 [2/2]
From: Jeff Kletsky <[email protected]>
This is a IPQ4019-based device with a PCI-attached QCA9888 supplying a third radio on 5 GHz. The OEM's firmware and source suggest that this device is "based on Qualcomm AP DK07.1-c1"
Linksys ships four market-specific variants of this device, notated as -AH, -EU, (no suffix), and -CA. They supply four sets of pre-cal board files in their firmware, AH, EU, FCC, and IC. The corresponding files differ from each other, and appear to provide different parameters in the different regions. The OEM firmware copies the appropriate set of files into place based on examining the SKU of the device at boot.
These board files may be obtained from extraction of the OEM firmware Ver. 1.1.4.191539, Latest Date: 11/8/2018, 49.0 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.4.191539_prod.img
Ver. 1.1.3.184925, Latest Date: 11/15/2017, 47.4 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.3.184925_prod.img
and/or from a running device. There does not appear to be a difference in the board files between the two firmware versions.
DTS for the EA8300 under OpenWrt expects that the variant be encoded as, for example, linksys-ea8300-fcc, with the lower-cased suffix indicating the OEM's regional code, or -fcc.
Two similar messages will be sent, one for each chipset, as per the directions.
The files selected and their original names and organization include:
27d9dfe1e86c3befe808f89dd3cd105b OEM/QCA9888/IC/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin
7f2f0de6c0fb2df1d642895d8233d3ef OEM/QCA9888/EU/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin
62049f88a498e51870973143e376e7af OEM/QCA9888/FCC/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin
27d71485fc4987bc1c11b7744c373b59 OEM/QCA9888/AH/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.binThe files were renamed as follows:
for JD in AH EU FCC IC ; do
jd=$(echo "$JD" | tr 'A-Z' 'a-z')
cp -vp OEM/QCA9888/${JD}/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin \
${dest}/bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-${jd}
doneRenamed board files are individually attached to QCA9888 messages.
- QCA9888 hw 2.0:
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-eu
md5sum: 7f2f0de6c0fb2df1d642895d8233d3ef
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-ic
md5sum: 27d9dfe1e86c3befe808f89dd3cd105b
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-ah
md5sum: 27d71485fc4987bc1c11b7744c373b59
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-fcc
md5sum: 62049f88a498e51870973143e376e7afJeff Kletsky
--
v2: added .bin file extension
_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 48 lines · Christian Lamparter
From: Jeff Kletsky <[email protected]>
This is a IPQ4019-based device with a PCI-attached QCA9888 supplying a third radio on 5 GHz. The OEM's firmware and source suggest that this device is "based on Qualcomm AP DK07.1-c1"
Linksys ships four market-specific variants of this device, notated as -AH, -EU, (no suffix), and -CA. They supply four sets of pre-cal board files in their firmware, AH, EU, FCC, and IC. The corresponding files differ from each other, and appear to provide different parameters in the different regions. The OEM firmware copies the appropriate set of files into place based on examining the SKU of the device at boot.
These board files may be obtained from extraction of the OEM firmware Ver. 1.1.4.191539, Latest Date: 11/8/2018, 49.0 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.4.191539_prod.img
Ver. 1.1.3.184925, Latest Date: 11/15/2017, 47.4 MB
http://downloads.linksys.com/downloads/firmware/FW_EA8300_1.1.3.184925_prod.img
and/or from a running device. There does not appear to be a difference in the board files between the two firmware versions.DTS for the EA8300 under OpenWrt expects that the variant be encoded as, for example, linksys-ea8300-fcc, with the lower-cased suffix indicating the OEM's regional code, or -fcc.
Two similar messages will be sent, one for each chipset, as per the directions.
The files selected and their original names and organization include:
27d9dfe1e86c3befe808f89dd3cd105b OEM/QCA9888/IC/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin 7f2f0de6c0fb2df1d642895d8233d3ef OEM/QCA9888/EU/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin 62049f88a498e51870973143e376e7af OEM/QCA9888/FCC/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin 27d71485fc4987bc1c11b7744c373b59 OEM/QCA9888/AH/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.binThe files were renamed as follows:
for JD in AH EU FCC IC ; do jd=$(echo "$JD" | tr 'A-Z' 'a-z') cp -vp OEM/QCA9888/${JD}/boardData_2_0_QCA9888_5G_Y9690_SBS_HB.bin \ ${dest}/bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-${jd} doneRenamed board files are individually attached to QCA9888 messages.
- QCA9888 hw 2.0:
Quoted 11 lines
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-eu
md5sum: 7f2f0de6c0fb2df1d642895d8233d3ef
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-ic
md5sum: 27d9dfe1e86c3befe808f89dd3cd105b
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-ah
md5sum: 27d71485fc4987bc1c11b7744c373b59
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-fcc
md5sum: 62049f88a498e51870973143e376e7afThanks, added to QCA9888/hw2.0/board-2.bin:
New:
bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-ah bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-eu bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-fcc bus=pci,bmi-chip-id=0,bmi-board-id=23,variant=linksys-ea8300-ic
Changed:
Deleted:
4 board image(s) added, 0 changed, 0 deleted, 16 in total
https://github.com/kvalo/ath10k-firmware/commit/82f428f4bb780b3462656be8e05ba7bd8052c658
Signature · 8 lines
https://patchwork.kernel.org/project/linux-wireless/list/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k