Skip to contentSkip to conversation

Data about Apple iPod, Mac, Powerbook, iBook needed

DISCUSSION Stefan Richter 3 participants 5 messages Apr 8, 2006 – Apr 18, 2006

lore
Share & tools
lore
#0 lore raw

Hi all,

a number of Apple iPods have buggy firmware which report a wrong disk size when plugged in. This may lead to I/O errors, making the iPod inaccessible under Linux. I have been told this happens especially if the kernel is configured for EFI partition support.

The USB storage driver already contains a workaround for several iPod models. We need to add the same to the FireWire storage driver (sbp2). Alas we cannot use the same model IDs like usb-storage to detect whether a disk is actually an iPod. In particular, sbp2 must be able to distinguish between iPods and Apple Macs or Powerbooks or iBooks which are attached to a Linux box in "target disk mode".

Therefore I need help from people who have a FireWire iPod and a Linux box with FireWire port:

1. Please plug it in via FireWire and report the output of

   $ cat /sys/bus/ieee1394/devices/000a27*-0/model_id
   and of
   $ dmesg | grep "hdwr sectors"
2. If it is an USB/FireWire combo iPod, please also plug it in
   via USB and report the output of
   $ dmesg | grep "hdwr sectors"
I would also like to know the model of iPod (i.e. generation of iPod) and the version of the Linux kernel.

I also need help from people who have an Apple Mac or Powerbook or iBook and a Linux box with FireWire port:

A. On the Linux box, unload the sbp2 driver:

   # modprobe -r sbp2
   Reload it with the following parameter:
   # modprobe sbp2 force_inquiry_hack=1
   Also make sure that ohci1394 is loaded. (Check with lsmod. Some
   rare host adapters need pcilynx instead oh ohci1394.)
B. Reboot the Apple and hold the "t" key. This boots the Mac into
   "target disk mode", i.e. lets it expose its built-in HDD as a
   FireWire disk. The "t" key can be released when a big FireWire
   symbol is shown on the screen.
C. Connect the Mac and the Linux box via FireWire. The sbp2 driver
   should now log in into the Mac, which will be shown in the kernel
   log as well as in /proc/scsi/scsi. Please report the output of
   $ dmesg | grep firmware_revision
D. The Mac can be unplugged and normally rebooted after this.

Thanks in advance to everyone who takes the time to collect these data.

Signature · 3 lines
Stefan Richter
-=====-=-==- -=-- -=---
http://arcgraph.de/sr/
#1 lore raw
Quoted 5 lines · Stefan Richter

Therefore I need help from people who have a FireWire iPod and a Linux box with FireWire port:

1. Please plug it in via FireWire and report the output of

    $ cat /sys/bus/ieee1394/devices/000a27*-0/model_id

Reported ID is 0x000000.

Quoted 2 lines

and of
$ dmesg | grep "hdwr sectors"

I don't have that output in my logs, but hdparm tells me:

/dev/sda:
readonly = 0 (off)
readahead = 256 (on)
geometry = 38147/64/32, sectors = 40000536576, start = 0

Quoted 2 lines

I would also like to know the model of iPod (i.e. generation of iPod) and the version of the Linux kernel.

It's a 3G iPod and the box in question is a Powerbook[0] running a rawhide (Fedora) kernel based on 2.6.16.1.

Jon.

[0] All the Powerbooks here run only Linux.

#2 lore raw
Quoted 1 line · Jon Masters

[0] All the Powerbooks here run only Linux.

You can still do the 't' thing. It's in the firmware. However, Stefan has already sent me a patch so he probably doesn't need this information anymore.

Cheers,
Jody

Quoted 10 lines

-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid0944&bid$1720&dat1642
_______________________________________________
mailing list [email protected]
https://lists.sourceforge.net/lists/listinfo/linux1394-user

#3 lore raw
Quoted 7 lines · Jody McIntyre
Quoted 1 line · Jon Masters

[0] All the Powerbooks here run only Linux.

You can still do the 't' thing. It's in the firmware. However, Stefan has already sent me a patch so he probably doesn't need this information anymore.

Sure. I was just hinting that the original post implied one owned a Mac and/or a Linux box and that the two weren't necessarily the same thing :-)

Jon.

#4 lore raw
Quoted 11 lines · Jon Masters
Quoted 6 lines · Jody McIntyre
Quoted 1 line · Jon Masters

[0] All the Powerbooks here run only Linux.

You can still do the 't' thing. It's in the firmware. However, Stefan has already sent me a patch so he probably doesn't need this information anymore.

Sure. I was just hinting that the original post implied one owned a Mac and/or a Linux box and that the two weren't necessarily the same thing :-)

Jon, if you have the time and two available machines, I would still be interested if there is a firmware_revision logged by sbp2 when it logs in into a Powerbook in target disk mode.

(Remember to unload/reload sbp2 with "modprobe sbp2 force_inquiry_hack=1" on the machine which is running Linux; sbp2 would not print that log message otherwise. There will also be no log message if the Powerbook's firmware does not generate a firmware_revision entry in the first place, as has been reported by iBook owners.)

TIA,

Signature · 3 lines
Stefan Richter
-=====-=-==- -=-- =--=-
http://arcgraph.de/sr/