Initial Windows on ARM (AArch64 64-Bit) host support
v3 cover Initial Windows on ARM (AArch64 64-Bit) host support
Initial Windows on ARM (AArch64 64-Bit) host support
This series of patches is for initial support of Windows 10 on ARM as a QEMU host. Currently only TCG intepreter is working correctly, it crashes when TCG JIT is enabled.
For now we assume it is built using the clang aarch64-w64-mingw32 toolchain, you can get a prebuilt toolchain at https://github.com/mstorsjo/llvm-mingw.
Cao Jiaxi (4):
QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
qga: Fix mingw compilation warnings on enum conversion util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
osdep: Fix mingw compilation regarding stdio formats
contrib/libvhost-user/libvhost-user.h | 2 +- include/qemu/compiler.h | 2 +- include/qemu/osdep.h | 10 +++++----- qga/commands-win32.c | 2 +- scripts/cocci-macro-file.h | 7 ++++++- slirp/src/util.h | 2 +- util/cacheinfo.c | 2 +- 7 files changed, 16 insertions(+), 11 deletions(-)
Signature · 1 line
2.17.1
PATCH v3 1/4 QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
gcc_struct is for x86 only, and it generates an warning on ARM64 Clang/MinGW targets.
--- contrib/libvhost-user/libvhost-user.h | 2 +- include/qemu/compiler.h | 2 +- scripts/cocci-macro-file.h | 7 ++++++- slirp/src/util.h | 2 +- 4 files changed, 9 insertions(+), 4 deletions(-)
contrib/libvhost-user/libvhost-user.h +1 -1
@@ -148,7 +148,7 @@ typedef struct VhostUserInflight {uint16_t queue_size; } VhostUserInflight; -#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define VU_PACKED __attribute__((gcc_struct, packed))#else # define VU_PACKED __attribute__((packed))
include/qemu/compiler.h +1 -1
@@ -28,7 +28,7 @@#define QEMU_SENTINEL __attribute__((sentinel)) -#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define QEMU_PACKED __attribute__((gcc_struct, packed))#else # define QEMU_PACKED __attribute__((packed))
scripts/cocci-macro-file.h +6 -1
@@ -23,7 +23,12 @@#define QEMU_NORETURN __attribute__ ((__noreturn__))#define QEMU_WARN_UNUSED_RESULT __attribute__((warn_unused_result))#define QEMU_SENTINEL __attribute__((sentinel)) -#define QEMU_PACKED __attribute__((gcc_struct, packed)) + +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__)) +# define QEMU_PACKED __attribute__((gcc_struct, packed)) +#else +# define QEMU_PACKED __attribute__((packed)) +#endif #define cat (x,y) x ## y#define cat2 (x,y) cat(x,y)
slirp/src/util.h +1 -1
@@ -43,7 +43,7 @@#include <netinet/in.h> #endif -#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define SLIRP_PACKED __attribute__((gcc_struct, packed))#else # define SLIRP_PACKED __attribute__((packed))
Signature · 1 line
2.17.1
Re: [Qemu-devel] [PATCH v3 1/4] QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
Quoted 60 lines · Cao Jiaxi
gcc_structis for x86 only, and it generates an warning on ARM64 Clang/MinGW targets.Signed-off-by Cao Jiaxi <[email protected]>--- contrib/libvhost-user/libvhost-user.h | 2 +- include/qemu/compiler.h | 2 +- scripts/cocci-macro-file.h | 7 ++++++- slirp/src/util.h | 2 +- 4 files changed, 9 insertions(+), 4 deletions(-)contrib/libvhost-user/libvhost-user.h +1
-1@@ -148,7 +148,7 @@ typedef struct VhostUserInflight {uint16_t queue_size; } VhostUserInflight; -#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define VU_PACKED __attribute__((gcc_struct, packed))#else # define VU_PACKED __attribute__((packed))include/qemu/compiler.h +1
-1@@ -28,7 +28,7 @@#define QEMU_SENTINEL __attribute__((sentinel)) -#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define QEMU_PACKED __attribute__((gcc_struct, packed))#else # define QEMU_PACKED __attribute__((packed))scripts/cocci-macro-file.h +6
-1@@ -23,7 +23,12 @@#define QEMU_NORETURN __attribute__ ((__noreturn__))#define QEMU_WARN_UNUSED_RESULT __attribute__((warn_unused_result))#define QEMU_SENTINEL __attribute__((sentinel)) -#define QEMU_PACKED __attribute__((gcc_struct, packed)) + +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__)) +# define QEMU_PACKED __attribute__((gcc_struct, packed)) +#else +# define QEMU_PACKED __attribute__((packed)) +#endif #define cat (x,y) x ## y#define cat2 (x,y) cat(x,y)slirp/src/util.h +0
-0
slirp/src/util.h line 49
Quoted 8 lines
slirp/src/util.h +1
-1@@ -43,7 +43,7 @@#include <netinet/in.h> #endif -#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define SLIRP_PACKED __attribute__((gcc_struct, packed))#else # define SLIRP_PACKED __attribute__((packed))
The slirp code is currently on its way into a separate module, so you might need to provide that hunk to the libslirp folks again... I'm putting the slirp maintainers on CC:, maybe they can pick it up from here.
Anyway:
Re: [Qemu-devel] [PATCH v3 1/4] QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
Quoted 20 lines · Thomas Huth
Quoted 18 lines · Cao Jiaxi
gcc_structis for x86 only, and it generates an warning on ARM64 Clang/MinGW targets.Signed-off-by Cao Jiaxi <[email protected]>--- contrib/libvhost-user/libvhost-user.h | 2 +- include/qemu/compiler.h | 2 +- scripts/cocci-macro-file.h | 7 ++++++- slirp/src/util.h | 2 +- 4 files changed, 9 insertions(+), 4 deletions(-)slirp/src/util.h +0
-0@@ -43,7 +43,7 @@#include <netinet/in.h> #endif
Quoted 10 lines
slirp/src/util.h line 49
Quoted 6 lines
slirp/src/util.h +1
-1-#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define SLIRP_PACKED __attribute__((gcc_struct, packed))#else # define SLIRP_PACKED __attribute__((packed))The slirp code is currently on its way into a separate module, so you might need to provide that hunk to the libslirp folks again... I'm putting the slirp maintainers on CC:, maybe they can pick it up from here.
Yes, the slirp module has now landed in master, so this patch definitely needs to be split into two. I've kept in my target-arm.next tree the parts which are applicable to the QEMU repo itself (ie everything except the slirp/ change), so we just need a new patch for the slirp submodule part.
Marc-André, Samuel -- what's the process for submitting and getting reviewed changes to the slirp submodule now it's a separate project ?
thanks
-- PMM
Re: [Qemu-devel] [PATCH v3 1/4] QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
Hi
Le ven. 3 mai 2019 à 17:23, Peter Maydell <[email protected]> a écrit :
Quoted 40 lines · Thomas Huth
Quoted 3 lines · Cao Jiaxi
Quoted 1 line
gcc_structis for x86 only, and it generates an warning on ARM64Clang/MinGW targets.
Quoted 17 lines
Quoted 17 lines
Signed-off-by Cao Jiaxi <[email protected]>--- contrib/libvhost-user/libvhost-user.h | 2 +- include/qemu/compiler.h | 2 +- scripts/cocci-macro-file.h | 7 ++++++- slirp/src/util.h | 2 +- 4 files changed, 9 insertions(+), 4 deletions(-)slirp/src/util.h +0
-0@@ -43,7 +43,7 @@#include <netinet/in.h> #endif Quoted 10 lines
slirp/src/util.h line 49
Quoted 6 lines
slirp/src/util.h +1
-1-#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define SLIRP_PACKED __attribute__((gcc_struct, packed))#else # define SLIRP_PACKED __attribute__((packed))The slirp code is currently on its way into a separate module, so you might need to provide that hunk to the libslirp folks again... I'm putting the slirp maintainers on CC:, maybe they can pick it up from
here.
Yes, the slirp module has now landed in master, so this patch definitely needs to be split into two. I've kept in my target-arm.next tree the parts which are applicable to the QEMU repo itself (ie everything except the slirp/ change), so we just need a new patch for the slirp submodule part.
Quoted 4 lines
Marc-André, Samuel -- what's the process for submitting and getting reviewed changes to the slirp submodule now it's a separate project ?
It's hosted on gitlab.freedesktop.org, with some CI. It's fine to send patches on qemu devel, as long as Samuel or I are in CC. But in the long term, I think gitlab MR will be favoured (after a while using it, I think gitlab is better than ML for patches & bug tracking tbh)
Quoted 1 line
Re: [Qemu-devel] [PATCH v3 1/4] QEMU_PACKED: Remove gcc_struct attribute in Windows non x86 targets
Quoted 50 lines · Marc-André Lureau
Hi
Le ven. 3 mai 2019 à 17:23, Peter Maydell <[email protected]> a écrit :
Quoted 40 lines · Thomas Huth
Quoted 3 lines · Cao Jiaxi
Quoted 1 line
gcc_structis for x86 only, and it generates an warning on ARM64Clang/MinGW targets.
Quoted 17 lines
Quoted 17 lines
Signed-off-by Cao Jiaxi <[email protected]>--- contrib/libvhost-user/libvhost-user.h | 2 +- include/qemu/compiler.h | 2 +- scripts/cocci-macro-file.h | 7 ++++++- slirp/src/util.h | 2 +- 4 files changed, 9 insertions(+), 4 deletions(-)slirp/src/util.h +0
-0@@ -43,7 +43,7 @@#include <netinet/in.h> #endif Quoted 10 lines
slirp/src/util.h line 49
Quoted 6 lines
slirp/src/util.h +1
-1-#if defined(_WIN32) +#if defined(_WIN32) && (defined(__x86_64__) || defined(__i386__))# define SLIRP_PACKED __attribute__((gcc_struct, packed))#else # define SLIRP_PACKED __attribute__((packed))The slirp code is currently on its way into a separate module, so you might need to provide that hunk to the libslirp folks again... I'm putting the slirp maintainers on CC:, maybe they can pick it up from
here.
Yes, the slirp module has now landed in master, so this patch definitely needs to be split into two. I've kept in my target-arm.next tree the parts which are applicable to the QEMU repo itself (ie everything except the slirp/ change), so we just need a new patch for the slirp submodule part.
Quoted 4 lines
Marc-André, Samuel -- what's the process for submitting and getting reviewed changes to the slirp submodule now it's a separate project ?
Quoted 4 lines
It's hosted on gitlab.freedesktop.org, with some CI. It's fine to send patches on qemu devel, as long as Samuel or I are in CC. But in the long term, I think gitlab MR will be favoured (after a while using it, I think gitlab is better than ML for patches & bug tracking tbh)
Except when working offline (or with poor intermittent link).
PATCH v3 2/4 qga: Fix mingw compilation warnings on enum conversion
In reply to Cao JiaxiThe win2qemu[] is supposed to be the conversion table to convert between STORAGE_BUS_TYPE in Windows SDK and GuestDiskBusType in qga.
But it was incorrectly written that it forces to set a GuestDiskBusType value to STORAGE_BUS_TYPE, which generates an enum conversion warning in clang.
--- qga/commands-win32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
qga/commands-win32.c +1 -1
@@ -457,7 +457,7 @@ void qmp_guest_file_flush(int64_t handle, Error **errp)#ifdef CONFIG_QGA_NTDDSCSI -static STORAGE_BUS_TYPE win2qemu[] = { +static GuestDiskBusType win2qemu[] = { [BusTypeUnknown] =GUEST_DISK_BUS_TYPE_UNKNOWN , [BusTypeScsi] =GUEST_DISK_BUS_TYPE_SCSI , [BusTypeAtapi] = GUEST_DISK_BUS_TYPE_IDE,
Signature · 1 line
2.17.1
Re: [Qemu-devel] [PATCH v3 2/4] qga: Fix mingw compilation warnings on enum conversion
Quoted 17 lines · Cao Jiaxi
The win2qemu[] is supposed to be the conversion table to convert between
STORAGE_BUS_TYPEin Windows SDK and GuestDiskBusType in qga.But it was incorrectly written that it forces to set a GuestDiskBusType value to
STORAGE_BUS_TYPE, which generates an enum conversion warning in clang.Signed-off-by Cao Jiaxi <[email protected]>--- qga/commands-win32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)qga/commands-win32.c +0
-0
qga/commands-win32.c void qmp_guest_file_flush(int64_t handle, Error **errp) · line 463
Quoted 8 lines
qga/commands-win32.c +1
-1@@ -457,7 +457,7 @@ void qmp_guest_file_flush(int64_t handle, Error **errp)#ifdef CONFIG_QGA_NTDDSCSI -static STORAGE_BUS_TYPE win2qemu[] = { +static GuestDiskBusType win2qemu[] = { [BusTypeUnknown] =GUEST_DISK_BUS_TYPE_UNKNOWN , [BusTypeScsi] =GUEST_DISK_BUS_TYPE_SCSI , [BusTypeAtapi] = GUEST_DISK_BUS_TYPE_IDE,
r~
Re: [Qemu-devel] [PATCH v3 2/4] qga: Fix mingw compilation warnings on enum conversion
In reply to Cao JiaxiQuoted 16 lines · Cao Jiaxi
The win2qemu[] is supposed to be the conversion table to convert between
STORAGE_BUS_TYPEin Windows SDK and GuestDiskBusType in qga.But it was incorrectly written that it forces to set a GuestDiskBusType value to
STORAGE_BUS_TYPE, which generates an enum conversion warning in clang.Signed-off-by Cao Jiaxi <[email protected]>--- qga/commands-win32.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)qga/commands-win32.c +0
-0
qga/commands-win32.c void qmp_guest_file_flush(int64_t handle, Error **errp) · line 463
Quoted 8 lines
qga/commands-win32.c +1
-1@@ -457,7 +457,7 @@ void qmp_guest_file_flush(int64_t handle, Error **errp)#ifdef CONFIG_QGA_NTDDSCSI -static STORAGE_BUS_TYPE win2qemu[] = { +static GuestDiskBusType win2qemu[] = { [BusTypeUnknown] =GUEST_DISK_BUS_TYPE_UNKNOWN , [BusTypeScsi] =GUEST_DISK_BUS_TYPE_SCSI , [BusTypeAtapi] = GUEST_DISK_BUS_TYPE_IDE,
PATCH v3 3/4 util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
In reply to Cao JiaxiWindows ARM64 uses LLP64 model, which breaks current assumptions.
--- util/cacheinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
util/cacheinfo.c +1 -1
@@ -107,7 +107,7 @@ static void sys_cache_info(int *isize, int *dsize)static void arch_cache_info (int *isize,int *dsize) {if (*isize ==0 || *dsize ==0 ) { -unsigned long ctr; +uint64_t ctr;/* The real cache geometry is in CCSIDR_EL1/CLIDR_EL1/CSSELR_EL1, but (at least under Linux) these are marked protected by the
Signature · 1 line
2.17.1
Re: [Qemu-devel] [PATCH v3 3/4] util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
Quoted 13 lines · Cao Jiaxi
Windows ARM64 uses LLP64 model, which breaks current assumptions.
Signed-off-by Cao Jiaxi <[email protected]>--- util/cacheinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)util/cacheinfo.c +0
-0
util/cacheinfo.c static void sys_cache_info(int *isize, int *dsize) · line 113
Quoted 8 lines
util/cacheinfo.c +1
-1@@ -107,7 +107,7 @@ static void sys_cache_info(int *isize, int *dsize)static void arch_cache_info (int *isize,int *dsize) {if (*isize ==0 || *dsize ==0 ) { -unsigned long ctr; +uint64_t ctr;/* The real cache geometry is in CCSIDR_EL1/CLIDR_EL1/CSSELR_EL1, but (at least under Linux) these are marked protected by the
r~
Re: [Qemu-arm] [Qemu-devel] [PATCH v3 3/4] util/cacheinfo: Use uint64_t on LLP64 model to satisfy Windows ARM64
In reply to Cao JiaxiQuoted 13 lines · Cao Jiaxi
Windows ARM64 uses LLP64 model, which breaks current assumptions.
Signed-off-by Cao Jiaxi <[email protected]>--- util/cacheinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)util/cacheinfo.c +0
-0
util/cacheinfo.c static void sys_cache_info(int *isize, int *dsize) · line 113
Quoted 8 lines
util/cacheinfo.c +1
-1@@ -107,7 +107,7 @@ static void sys_cache_info(int *isize, int *dsize)static void arch_cache_info (int *isize,int *dsize) {if (*isize ==0 || *dsize ==0 ) { -unsigned long ctr; +uint64_t ctr;/* The real cache geometry is in CCSIDR_EL1/CLIDR_EL1/CSSELR_EL1, but (at least under Linux) these are marked protected by the
PATCH v3 4/4 osdep: Fix mingw compilation regarding stdio formats
In reply to Cao JiaxiI encountered the following compilation error on mingw:
/mnt/d/qemu/include/qemu/osdep.h:97:9: error: '__USE_MINGW_ANSI_STDIO' macro redefined [-Werror,-Wmacro-redefined]
#define __USE_MINGW_ANSI_STDIO 1
^/mnt/d/llvm-mingw/aarch64-w64-mingw32/include/_mingw.h:433:9: note: previous definition is here
#define __USE_MINGW_ANSI_STDIO 0 /* was not defined so it should be 0 */
It turns out that __USE_MINGW_ANSI_STDIO must be set before any system headers are included, not just before stdio.h.
--- include/qemu/osdep.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
include/qemu/osdep.h +5 -5
@@ -85,17 +85,17 @@ extern int daemon(int, int);#endif #endif +/* enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) */ +#ifdef __MINGW32__ +#define __USE_MINGW_ANSI_STDIO 1 +#endif +#include <stdarg.h> #include <stddef.h> #include <stdbool.h> #include <stdint.h> #include <sys/types.h> #include <stdlib.h> - -/* enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) */ -#ifdef __MINGW32__ -#define __USE_MINGW_ANSI_STDIO 1 -#endif #include <stdio.h> #include <string.h>
Signature · 1 line
2.17.1
Re: [Qemu-devel] [PATCH v3 4/4] osdep: Fix mingw compilation regarding stdio formats
Quoted 34 lines · Cao Jiaxi
I encountered the following compilation error on mingw:
/mnt/d/qemu/include/qemu/osdep.h:97:9: error: '__USE_MINGW_ANSI_STDIO' macro redefined [-Werror,-Wmacro-redefined]#define __USE_MINGW_ANSI_STDIO 1 ^
/mnt/d/llvm-mingw/aarch64-w64-mingw32/include/_mingw.h:433:9: note: previous definition is here
#define__USE_MINGW_ANSI_STDIO0 /* was not defined so it should be 0 */It turns out that
__USE_MINGW_ANSI_STDIOmust be set before any system headers are included, not just beforestdio.h.Signed-off-by Cao Jiaxi <[email protected]>--- include/qemu/osdep.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)include/qemu/osdep.h +5
-0@@ -85,17 +85,17 @@ extern int daemon(int, int);#endif #endif +/* enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) */ +#ifdef __MINGW32__ +#define __USE_MINGW_ANSI_STDIO 1 +#endif +#include <stdarg.h> #include <stddef.h> #include <stdbool.h> #include <stdint.h>
include/qemu/osdep.h extern int daemon(int, int); · line 101
Quoted 10 lines
include/qemu/osdep.h +0
-5#include <sys/types.h> #include <stdlib.h> - -/* enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) */ -#ifdef __MINGW32__ -#define __USE_MINGW_ANSI_STDIO 1 -#endif #include <stdio.h> #include <string.h>
Stefan Weil
Reviewed-byRe: [Qemu-devel] [PATCH v3 4/4] osdep: Fix mingw compilation regarding stdio formats
Quoted 43 lines · Thomas Huth
Quoted 42 lines · Cao Jiaxi
I encountered the following compilation error on mingw:
/mnt/d/qemu/include/qemu/osdep.h:97:9: error: '__USE_MINGW_ANSI_STDIO' macro redefined [-Werror,-Wmacro-redefined]#define __USE_MINGW_ANSI_STDIO 1 ^
/mnt/d/llvm-mingw/aarch64-w64-mingw32/include/_mingw.h:433:9: note: previous definition is here
#define__USE_MINGW_ANSI_STDIO0 /* was not defined so it should be 0 */It turns out that
__USE_MINGW_ANSI_STDIOmust be set before any system headers are included, not just beforestdio.h.Signed-off-by Cao Jiaxi <[email protected]>--- include/qemu/osdep.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)include/qemu/osdep.h +5
-5@@ -85,17 +85,17 @@ extern int daemon(int, int);#endif #endif +/* enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) */ +#ifdef __MINGW32__ +#define __USE_MINGW_ANSI_STDIO 1 +#endif +#include <stdarg.h> #include <stddef.h> #include <stdbool.h> #include <stdint.h> #include <sys/types.h> #include <stdlib.h> - -/* enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later) */ -#ifdef __MINGW32__ -#define __USE_MINGW_ANSI_STDIO 1 -#endif #include <stdio.h>
Quoted 4 lines
include/qemu/osdep.h extern int daemon(int, int); · line 101
Quoted 2 lines
include/qemu/osdep.h +0
-0#include <string.h> Reviewed-by Thomas Huth <[email protected]>
Quoted 8 lines · Cao Jiaxi
Initial Windows on ARM (AArch64 64-Bit) host support
This series of patches is for initial support of Windows 10 on ARM as a QEMU host. Currently only TCG intepreter is working correctly, it crashes when TCG JIT is enabled.
For now we assume it is built using the clang aarch64-w64-mingw32 toolchain, you can get a prebuilt toolchain at https://github.com/mstorsjo/llvm-mingw.
I'm a bit confused since those patches appear 2 times in my mailbox. Assuming this is a git send-email setup mistake, please consider adding my Reviewed-by/Tested-by here too.
These are:
Quoted 2 lines
Cao Jiaxi (4):
QEMU_PACKED: Removegcc_structattribute in Windows non x86 targets
No tag.
Quoted 1 line
qga: Fix mingw compilation warnings on enum conversion
Quoted 1 line
util/cacheinfo: Use
uint64_ton LLP64 model to satisfy Windows ARM64
Quoted 1 line
osdep: Fix mingw compilation regarding stdio formats
Thanks,
Phil.
Quoted 7 lines · Philippe Mathieu-Daudé
Quoted 5 lines · Cao Jiaxi
Initial Windows on ARM (AArch64 64-Bit) host support
This series of patches is for initial support of Windows 10 on ARM as a QEMU host. Currently only TCG intepreter is working correctly, it crashes when TCG JIT is enabled.
Quoted 7 lines
Quoted 3 lines
For now we assume it is built using the clang aarch64-w64-mingw32 toolchain, you can get a prebuilt toolchain at https://github.com/mstorsjo/llvm-mingw.
I'm a bit confused since those patches appear 2 times in my mailbox. Assuming this is a git send-email setup mistake, please consider adding my Reviewed-by/Tested-by here too.
Thanks -- I've applied these patches to target-arm.next, and have consolidated the various tags that people have applied to the two sets of emails (and checked that they actually are the same patches and not different code :-))
-- PMM