lilo questions.......
Hey Ray-
Thanks for the reply.....
Let me see if I can explain some of the things I wrote....
Quoted 3 lines · Ray Olszewski
*Making* this directory is not enough; you then need to *mount* the appropriate filesystem on it. (And using *s in directory names is bad practice, BTW.)
I was using the * as a highlight for this note
Quoted 6 lines
Quoted 4 lines
------------image=/boot/vmlinuz
-------------label=*mandrake* -------------root=/dev/hda3 -------------read-onlyNot sure how the --------- bits got here, but they do not belong
again using --------- as highlight, just for the note....
Quoted 10 lines
2. Make a separate filesystem (probably on
/dev/hda) that all distros mount as /boot, and put all the kernels in it. Their names need to be dsitinct, of course ... if I did this, I'd use names like vmlinuz-2.4.19-deb and vmlinuz-2.4.19-mandrake. Then use the appropriate names on the various image= lines.3. Retain separate /boot diretories for each distro, and edit the lilo.conf you install from appropriately. For example, if you were installing lilo from Debian, your various entries might look like this --
Quoted 8 lines
image=/mnt/mandrake/boot/vmlinuz
label=*mandrake*
root=/dev/hda3
read-only
image=/boot/vmlinuz
label=Debian
root=/dev/hdb2
read-only#2 and #3 look interesting. If you were doing this, which would you use?
Are the Kernel numbers what you show in example 2 following vmlinuz?
Quoted 1 line
Quoted 1 line
it says Install LILO in the MBR
The "it" is the manual I copied for installing Debian Woody said this:
"The next three selections refer to setting up the system to boot up.
* Select 'Make System Bootable
* Select the default 'Install LILO in the MBR and press Enter when the "Securing LILO" message appears."
Quoted 1 line
I mounted it from mandrake...
The "it" here refers to the drive that contains Debian...hda1
Quoted 3 lines
it was added to the lilo list. (this refers to Debian)
Quoted 1 line
understand that it will run from there, but not really perfect.
Here I mean that by not using the boot disk for Debian and instead scrolling down to Debian when the "graphic" LILO appears I find that Debian boots but does not run the same as when I use the boot disk.
Quoted 1 line
Quoted 1 line
"kernal" there? I know it contains important info from the installation
Here about coping the Kernel is a question...I really don't know what goes on a boot disk. Referring to as 'Kernel' is because I don't know what to call it....
Quoted 1 line
when I boot from floppy, wvdial works 'fb', but from lilo
I bet the other fellow (the ham radio op) who has also been helping me with the LILO stuff knows what 'fb' means...!
Quoted 1 line
And "not really perfect" is not very descriptive as a trouble report.
Sorry, I sometimes have trouble describing things in detail. I guess as an example I will describe something similiar when I first got involved with a simple linux that ran from dos called "Basiclinux". I don't remember all of the details, but in the beginning some of the stuff like the mail program and pppsetup were stored on a floppy. If I didn't use the floppy, I would have to set the mail up again, and the pppsetup too. This probably isn't a good description, but all I know is last night if I didn't use the boot disk for Debian, I would get disconnected after entering 'wvdial'. I have since then installed Basiclinux in its own partition on my Toshiba laptop. I will give it (debian) a try once more without the floppy to see if the same thing happens.
Thanks for the info and help.....
Neil T.
Quoted 11 lines
-------------------------------------------"Never tell me the odds!"--------
Ray Olszewski -- Han Solo
Palo Alto, California, USA [email protected]
--------------------------------------------------------------------------------
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
Signature · 14 lines
Arachne/DRdos-Mandrake9.0/Basiclinux-QrpHamRadio http://www.qsl.net/wa4chq __________________________________________________________________ The NEW Netscape 7.0 browser is now available. Upgrade now! http://channels.netscape.com/ns/browsers/download.jsp Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ - To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.linux-learn.org/faqs
Replies below, in an edited version of your message.
At 06:29 PM 11/25/02 -0500, neil t wrote:
[...]
Quoted 18 lines
Quoted 10 lines
2. Make a separate filesystem (probably on
/dev/hda) that all distros mount as /boot, and put all the kernels in it. Their names need to be dsitinct, of course ... if I did this, I'd use names like vmlinuz-2.4.19-deb and vmlinuz-2.4.19-mandrake. Then use the appropriate names on the various image= lines.3. Retain separate /boot diretories for each distro, and edit the lilo.conf you install from appropriately. For example, if you were installing lilo from Debian, your various entries might look like this --
Quoted 8 lines
image=/mnt/mandrake/boot/vmlinuz label=*mandrake* root=/dev/hda3 read-only image=/boot/vmlinuz label=Debian root=/dev/hdb2 read-only
Quoted 1 line
#2 and #3 look interesting. If you were doing this, which would you use?
I'm not sure. Back when I actually did it, the 1024-cylinder limit still mattered to lilo, so I was pretty much forced to use option #2. Probably I'd do it that way again, if the need arose ... but I find no benefit (to me; I'm not commenting obliquely on your situation) in running multi-boot systems.
Quoted 1 line
Are the Kernel numbers what you show in example 2 following vmlinuz?
Yes.
[...]
--
-------------------------------------------"Never tell me the odds!"--------
Ray Olszewski -- Han Solo
Palo Alto, California, USA [email protected]
-------------------------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs