davinci: fix build warnings
cover davinci: fix build warnings
From: Bartosz Golaszewski <[email protected]>
There are several build warnings related to driver-model usage emitted when building u-boot for da850-evm and da850-lcdk. This series fixes them and - while we're at it - removes the i2c compatiblity layer as davinci was the last user of it.
Bartosz Golaszewski (4):
davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
i2c: remove i2c driver-model compatibility layer
omapl138_lcdk_defconfig: don't build support for SPI
Makefile | 7 -- configs/da850_am18xxevm_defconfig | 1 - configs/omapl138_lcdk_defconfig | 7 +- configs/sandbox64_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/sandbox_flattree_defconfig | 1 - configs/sandbox_noblk_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/tools-only_defconfig | 1 - drivers/i2c/Kconfig | 13 +-- drivers/i2c/Makefile | 1 - drivers/i2c/i2c-uclass-compat.c | 128 ----------------------------- include/_exports.h | 3 +- include/configs/am3517_evm.h | 1 - include/configs/da850evm.h | 8 -- include/configs/omapl138_lcdk.h | 8 -- include/exports.h | 3 +- include/i2c.h | 80 ------------------ 18 files changed, 4 insertions(+), 262 deletions(-) delete mode 100644 drivers/i2c/i2c-uclass-compat.c
Signature · 1 line
2.21.0
PATCH 1/4 davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
From: Bartosz Golaszewski <[email protected]>
This option is no longer used on any davinci board but still selected in defconfigs which causes the following warning:
===================== WARNING ====================== This board uses CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list.
====================================================
Remove all references to CONFIG_DM_I2C_COMPAT from davinci.
--- configs/da850_am18xxevm_defconfig | 1 - configs/omapl138_lcdk_defconfig | 1 - include/configs/am3517_evm.h | 1 - include/configs/da850evm.h | 8 -------- include/configs/omapl138_lcdk.h | 8 -------- 5 files changed, 19 deletions(-)
configs/da850_am18xxevm_defconfig +0 -1
@@ -44,7 +44,6 @@ CONFIG_DM=y CONFIG_SPL_DM=y CONFIG_DA8XX_GPIO=y CONFIG_DM_I2C=y -CONFIG_DM_I2C_COMPAT=y CONFIG_SYS_I2C_DAVINCI=y CONFIG_MTD_DEVICE=y CONFIG_DM_SPI_FLASH=y
configs/omapl138_lcdk_defconfig +0 -1
@@ -37,7 +37,6 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y CONFIG_DM_I2C=y -CONFIG_DM_I2C_COMPAT=y CONFIG_SYS_I2C_DAVINCI=y CONFIG_DM_MMC=y CONFIG_NAND=y
include/configs/am3517_evm.h +0 -1
@@ -14,7 +14,6 @@#include <configs/ti_omap3_common.h> -#undef CONFIG_DM_I2C_COMPAT#define CONFIG_REVISION_TAG /* Hardware drivers */
include/configs/da850evm.h +0 -8
@@ -18,14 +18,6 @@#define CONFIG_USE_SPIFLASH #endif -/* -* Disable DM_* for SPL build and can be re-enabled after adding -* DM support in SPL -*/ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_I2C -#undef CONFIG_DM_I2C_COMPAT -#endif /* * SoC Configuration */
include/configs/omapl138_lcdk.h +0 -8
@@ -16,14 +16,6 @@#undef CONFIG_USE_SPIFLASH#undef CONFIG_SYS_USE_NOR -/* -* Disable DM_* for SPL build and can be re-enabled after adding -* DM support in SPL -*/ -#ifdef CONFIG_SPL_BUILD -#undef CONFIG_DM_I2C -#undef CONFIG_DM_I2C_COMPAT -#endif /* * SoC Configuration */
Signature · 1 line
2.21.0
PATCH 1/4 davinci: remove CONFIG_DM_I2C_COMPAT from defconfigs
Hello Bartosz,
Am 27.05.2019 um 10:57 schrieb Bartosz Golaszewski:
Quoted 13 lines
From: Bartosz Golaszewski <[email protected]>
This option is no longer used on any davinci board but still selected in defconfigs which causes the following warning:
===================== WARNING ====================== This board uses
CONFIG_DM_I2C_COMPAT. Please remove (possibly in a subsequent patch in your series) before sending patches to the mailing list.
====================================================Remove all references to
CONFIG_DM_I2C_COMPATfrom davinci.
Quoted 8 lines
Signed-off-by Bartosz Golaszewski <[email protected]>--- configs/da850_am18xxevm_defconfig | 1 - configs/omapl138_lcdk_defconfig | 1 - include/configs/am3517_evm.h | 1 - include/configs/da850evm.h | 8 -------- include/configs/omapl138_lcdk.h | 8 -------- 5 files changed, 19 deletions(-)
Thanks!
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 2/4 sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
There are no more "real" users of CONFIG_DM_I2C_COMPAT and we'll soon remove it altogether. Stop building it in sandbox mode.
--- Makefile | 2 +- configs/sandbox64_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/sandbox_flattree_defconfig | 1 - configs/sandbox_noblk_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/tools-only_defconfig | 1 - 7 files changed, 1 insertion(+), 7 deletions(-)
Makefile +1 -1
@@ -918,7 +918,7 @@ cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \ $(srctree)/scripts/config_whitelist.txt $(srctree) all: $(ALL-y) -ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y) +ifeq ($(CONFIG_DM_I2C_COMPAT),y) @echo >&2 "===================== WARNING ======================" @echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove" @echo >&2 "(possibly in a subsequent patch in your series)"
configs/sandbox64_defconfig +0 -1
@@ -89,7 +89,6 @@ CONFIG_BOARD=y CONFIG_BOARD_SANDBOX=y CONFIG_PM8916_GPIO=y CONFIG_SANDBOX_GPIO=y -CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y CONFIG_DM_I2C_GPIO=y
configs/sandbox_defconfig +0 -1
@@ -104,7 +104,6 @@ CONFIG_PM8916_GPIO=y CONFIG_SANDBOX_GPIO=y CONFIG_DM_HWSPINLOCK=y CONFIG_HWSPINLOCK_SANDBOX=y -CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y CONFIG_DM_I2C_GPIO=y
configs/sandbox_flattree_defconfig +0 -1
@@ -74,7 +74,6 @@ CONFIG_BOARD=y CONFIG_BOARD_SANDBOX=y CONFIG_PM8916_GPIO=y CONFIG_SANDBOX_GPIO=y -CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y CONFIG_DM_I2C_GPIO=y
configs/sandbox_noblk_defconfig +0 -1
@@ -81,7 +81,6 @@ CONFIG_BOARD=y CONFIG_BOARD_SANDBOX=y CONFIG_PM8916_GPIO=y CONFIG_SANDBOX_GPIO=y -CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y CONFIG_DM_I2C_GPIO=y
configs/sandbox_spl_defconfig +0 -1
@@ -95,7 +95,6 @@ CONFIG_BOARD=y CONFIG_BOARD_SANDBOX=y CONFIG_PM8916_GPIO=y CONFIG_SANDBOX_GPIO=y -CONFIG_DM_I2C_COMPAT=y CONFIG_I2C_CROS_EC_TUNNEL=y CONFIG_I2C_CROS_EC_LDO=y CONFIG_DM_I2C_GPIO=y
configs/tools-only_defconfig +0 -1
@@ -11,7 +11,6 @@ CONFIG_OF_HOSTFILE=y CONFIG_DEFAULT_DEVICE_TREE="sandbox" # CONFIG_UDP_FUNCTION_FASTBOOT is not set CONFIG_SANDBOX_GPIO=y -CONFIG_DM_I2C_COMPAT=y CONFIG_PCI=y CONFIG_DM_PCI=y CONFIG_PCI_SANDBOX=y
Signature · 1 line
2.21.0
PATCH 2/4 sandbox: remove CONFIG_DM_I2C_COMPAT from defconfigs
Hello Bartosz,
Am 27.05.2019 um 10:57 schrieb Bartosz Golaszewski:
Quoted 6 lines
From: Bartosz Golaszewski <[email protected]>
There are no more "real" users of
CONFIG_DM_I2C_COMPATand we'll soon remove it altogether. Stop building it in sandbox mode.Signed-off-by Bartosz Golaszewski <[email protected]>
Quoted 9 lines
--- Makefile | 2 +- configs/sandbox64_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/sandbox_flattree_defconfig | 1 - configs/sandbox_noblk_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/tools-only_defconfig | 1 - 7 files changed, 1 insertion(+), 7 deletions(-)
Thanks!
bye,
Heiko
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 3/4 i2c: remove i2c driver-model compatibility layer
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
There are no more users of the compatibility layer for i2c. Remove the driver and all references to it.
--- Makefile | 7 -- drivers/i2c/Kconfig | 13 +--- drivers/i2c/Makefile | 1 - drivers/i2c/i2c-uclass-compat.c | 128 -------------------------------- include/_exports.h | 3 +- include/exports.h | 3 +- include/i2c.h | 80 -------------------- 7 files changed, 3 insertions(+), 232 deletions(-) delete mode 100644 drivers/i2c/i2c-uclass-compat.c
Makefile +0 -7
@@ -918,13 +918,6 @@ cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \ $(srctree)/scripts/config_whitelist.txt $(srctree) all: $(ALL-y) -ifeq ($(CONFIG_DM_I2C_COMPAT),y) - @echo >&2 "===================== WARNING ======================" - @echo >&2 "This board uses CONFIG_DM_I2C_COMPAT. Please remove" - @echo >&2 "(possibly in a subsequent patch in your series)" - @echo >&2 "before sending patches to the mailing list." - @echo >&2 "====================================================" -endif ifeq ($(CONFIG_MMC),y) ifneq ($(CONFIG_DM_MMC)$(CONFIG_OF_CONTROL)$(CONFIG_BLK),yyy) @echo >&2 "===================== WARNING ======================"
drivers/i2c/Kconfig +1 -12
@@ -12,18 +12,7 @@ config DM_I2C write and speed, is implemented with the bus drivers operations, which provide methods for bus setting and data transfer. Each chip device (bus child) info is kept as parent platdata. The interface - is defined in include/i2c.h. When i2c bus driver supports the i2c - uclass, but the device drivers not, then DM_I2C_COMPAT config can - be used as compatibility layer. - -config DM_I2C_COMPAT - bool "Enable I2C compatibility layer" - depends on DM - help - Enable old-style I2C functions for compatibility with existing code. - This option can be enabled as a temporary measure to avoid needing - to convert all code for a board in a single commit. It should not - be enabled for any board in an official release. + is defined in include/i2c.h. config I2C_CROS_EC_TUNNEL tristate "Chrome OS EC tunnel I2C bus"
drivers/i2c/Makefile +0 -1
@@ -3,7 +3,6 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd at denx.de. obj-$(CONFIG_DM_I2C) += i2c-uclass.o -obj-$(CONFIG_DM_I2C_COMPAT) += i2c-uclass-compat.o obj-$(CONFIG_DM_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_$(SPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
drivers/i2c/i2c-uclass-compat.c deleted +0 -128
128 lines not on this page · raw message
include/_exports.h +1 -2
@@ -40,8 +40,7 @@EXPORT_FUNC (simple_strtol, long, simple_strtol, const char *, char **, unsigned int) EXPORT_FUNC(strcmp, int, strcmp, const char *cs, const char *ct) -#if defined(CONFIG_CMD_I2C ) && \ - (!defined(CONFIG_DM_I2C ) || defined(CONFIG_DM_I2C_COMPAT )) +#if defined(CONFIG_CMD_I2C ) && !defined(CONFIG_DM_I2C ) EXPORT_FUNC(i2c_write, int, i2c_write, uchar, uint, int , uchar * , int) EXPORT_FUNC(i2c_read, int, i2c_read, uchar, uint, int , uchar * , int) #else
include/exports.h +1 -2
@@ -32,8 +32,7 @@ long simple_strtol(const char *cp, char **endp, unsigned int base);int strcmp (const char *cs,const char *ct);unsigned long ustrtoul (const char *cp,char **endp,unsigned int base);unsigned long long ustrtoull (const char *cp,char **endp,unsigned int base); -#if defined(CONFIG_CMD_I2C ) && \ - (!defined(CONFIG_DM_I2C ) || defined(CONFIG_DM_I2C_COMPAT )) +#if defined(CONFIG_CMD_I2C ) && !defined(CONFIG_DM_I2C )int i2c_write (uchar ,uint ,int ,uchar * ,int );int i2c_read (uchar ,uint ,int ,uchar * ,int );#endif
include/i2c.h +0 -80
86 lines not on this page · raw message
Signature · 1 line
2.21.0
PATCH 3/4 i2c: remove i2c driver-model compatibility layer
Hello Bartosz,
Am 27.05.2019 um 10:57 schrieb Bartosz Golaszewski:
Quoted 15 lines
From: Bartosz Golaszewski <[email protected]>
There are no more users of the compatibility layer for i2c. Remove the driver and all references to it.
Signed-off-by Bartosz Golaszewski <[email protected]>--- Makefile | 7 -- drivers/i2c/Kconfig | 13 +--- drivers/i2c/Makefile | 1 - drivers/i2c/i2c-uclass-compat.c | 128 -------------------------------- include/_exports.h | 3 +- include/exports.h | 3 +- include/i2c.h | 80 -------------------- 7 files changed, 3 insertions(+), 232 deletions(-)
Quoted 1 line
delete mode 100644
drivers/i2c/i2c-uclass-compat.c
Thanks!
bye,
Heiko
Signature · 4 lines
-- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
PATCH 4/4 omapl138_lcdk_defconfig: don't build support for SPI
In reply to Bartosz GolaszewskiFrom: Bartosz Golaszewski <[email protected]>
The following warning is emited when building u-boot for da850-lcdk:
===================== WARNING ====================== This board does not use CONFIG_DM_SPI. Please update the board before v2019.04 for no dm conversion
and v2019.07 for partially dm converted drivers. Failure to update can lead to driver/board removal See doc/driver-model/MIGRATION.txt for more info.
====================================================
===================== WARNING ====================== This board does not use CONFIG_DM_SPI_FLASH. Please update the board to use CONFIG_SPI_FLASH before the v2019.07 release. Failure to update by the deadline may result in board removal. See doc/driver-model/MIGRATION.txt for more info.
====================================================
While we could fix it by selecting CONFIG_DM_SPI, there's no need to build it at all as SPI is disabled on da850-lcdk. Remove all unneeded options from the defconfig.
--- configs/omapl138_lcdk_defconfig | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
configs/omapl138_lcdk_defconfig +1 -5
@@ -27,6 +27,7 @@ CONFIG_CRC32_VERIFY=y # CONFIG_CMD_FLASH is not set # CONFIG_CMD_GPIO is not set CONFIG_CMD_NAND=y +# CONFIG_CMD_SPI is not set # CONFIG_CMD_SETEXPR is not set CONFIG_CMD_MTDPARTS=y CONFIG_CMD_DIAG=y
@@ -45,13 +46,8 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x28000 CONFIG_SPL_NAND_SIMPLE=y -CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_DM_SERIAL=y CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DAVINCI_SPI=y
Signature · 1 line
2.21.0
PATCH 4/4 omapl138_lcdk_defconfig: don't build support for SPI
Hello Bartosz,
Am 27.05.2019 um 10:57 schrieb Bartosz Golaszewski:
Quoted 18 lines
From: Bartosz Golaszewski <[email protected]>
The following warning is emited when building u-boot for da850-lcdk:
===================== WARNING ====================== This board does not use
CONFIG_DM_SPI. Please update the board before v2019.04 for no dm conversion
and v2019.07 for partially dm converted drivers. Failure to update can lead to driver/board removal Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
===================== WARNING ====================== This board does not useCONFIG_DM_SPI_FLASH. Please update the board to useCONFIG_SPI_FLASHbefore the v2019.07 release. Failure to update by the deadline may result in board removal. Seedoc/driver-model/MIGRATION.txtfor more info.
====================================================
Quoted 8 lines
While we could fix it by selecting
CONFIG_DM_SPI, there's no need to build it at all as SPI is disabled on da850-lcdk. Remove all unneeded options from the defconfig.Signed-off-by Bartosz Golaszewski <[email protected]>--- configs/omapl138_lcdk_defconfig | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
Thanks!
bye,
Heiko
Signature · 4 lines
-- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: hs at denx.de
cover davinci: fix build warnings
In reply to Bartosz Golaszewskipon., 27 maj 2019 o 10:57 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 35 lines
From: Bartosz Golaszewski <[email protected]>
There are several build warnings related to driver-model usage emitted when building u-boot for da850-evm and da850-lcdk. This series fixes them and - while we're at it - removes the i2c compatiblity layer as davinci was the last user of it.
Bartosz Golaszewski (4):
davinci: removeCONFIG_DM_I2C_COMPATfrom defconfigs
sandbox: removeCONFIG_DM_I2C_COMPATfrom defconfigs
i2c: remove i2c driver-model compatibility layer
omapl138_lcdk_defconfig: don't build support for SPIMakefile | 7 -- configs/da850_am18xxevm_defconfig | 1 - configs/omapl138_lcdk_defconfig | 7 +- configs/sandbox64_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/sandbox_flattree_defconfig | 1 - configs/sandbox_noblk_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/tools-only_defconfig | 1 - drivers/i2c/Kconfig | 13 +-- drivers/i2c/Makefile | 1 - drivers/i2c/i2c-uclass-compat.c | 128 ----------------------------- include/_exports.h | 3 +- include/configs/am3517_evm.h | 1 - include/configs/da850evm.h | 8 -- include/configs/omapl138_lcdk.h | 8 -- include/exports.h | 3 +- include/i2c.h | 80 ------------------ 18 files changed, 4 insertions(+), 262 deletions(-) delete mode 100644 drivers/i2c/i2c-uclass-compat.c
Quoted 3 lines
--
2.21.0
Ping
Bart
cover davinci: fix build warnings
pon., 24 cze 2019 o 10:18 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 37 lines
pon., 27 maj 2019 o 10:57 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 35 lines
From: Bartosz Golaszewski <[email protected]>
There are several build warnings related to driver-model usage emitted when building u-boot for da850-evm and da850-lcdk. This series fixes them and - while we're at it - removes the i2c compatiblity layer as davinci was the last user of it.
Bartosz Golaszewski (4):
davinci: removeCONFIG_DM_I2C_COMPATfrom defconfigs
sandbox: removeCONFIG_DM_I2C_COMPATfrom defconfigs
i2c: remove i2c driver-model compatibility layer
omapl138_lcdk_defconfig: don't build support for SPIMakefile | 7 -- configs/da850_am18xxevm_defconfig | 1 - configs/omapl138_lcdk_defconfig | 7 +- configs/sandbox64_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/sandbox_flattree_defconfig | 1 - configs/sandbox_noblk_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/tools-only_defconfig | 1 - drivers/i2c/Kconfig | 13 +-- drivers/i2c/Makefile | 1 - drivers/i2c/i2c-uclass-compat.c | 128 ----------------------------- include/_exports.h | 3 +- include/configs/am3517_evm.h | 1 - include/configs/da850evm.h | 8 -- include/configs/omapl138_lcdk.h | 8 -- include/exports.h | 3 +- include/i2c.h | 80 ------------------ 18 files changed, 4 insertions(+), 262 deletions(-) delete mode 100644 drivers/i2c/i2c-uclass-compat.c
Quoted 7 lines
Quoted 3 lines
--
2.21.0Ping
Bart
Hi Tom,
could you pick this one up as well post release?
Bart
cover davinci: fix build warnings
Quoted 42 lines · Bartosz Golaszewski
pon., 24 cze 2019 o 10:18 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 41 lines
pon., 27 maj 2019 o 10:57 Bartosz Golaszewski <[email protected]> napisał(a):
Quoted 38 lines
From: Bartosz Golaszewski <[email protected]>
There are several build warnings related to driver-model usage emitted when building u-boot for da850-evm and da850-lcdk. This series fixes them and - while we're at it - removes the i2c compatiblity layer as davinci was the last user of it.
Bartosz Golaszewski (4):
davinci: removeCONFIG_DM_I2C_COMPATfrom defconfigs
sandbox: removeCONFIG_DM_I2C_COMPATfrom defconfigs
i2c: remove i2c driver-model compatibility layer
omapl138_lcdk_defconfig: don't build support for SPIMakefile | 7 -- configs/da850_am18xxevm_defconfig | 1 - configs/omapl138_lcdk_defconfig | 7 +- configs/sandbox64_defconfig | 1 - configs/sandbox_defconfig | 1 - configs/sandbox_flattree_defconfig | 1 - configs/sandbox_noblk_defconfig | 1 - configs/sandbox_spl_defconfig | 1 - configs/tools-only_defconfig | 1 - drivers/i2c/Kconfig | 13 +-- drivers/i2c/Makefile | 1 - drivers/i2c/i2c-uclass-compat.c | 128 ----------------------------- include/_exports.h | 3 +- include/configs/am3517_evm.h | 1 - include/configs/da850evm.h | 8 -- include/configs/omapl138_lcdk.h | 8 -- include/exports.h | 3 +- include/i2c.h | 80 ------------------ 18 files changed, 4 insertions(+), 262 deletions(-) delete mode 100644 drivers/i2c/i2c-uclass-compat.c--
2.21.0
Quoted 7 lines
Quoted 3 lines
Ping
Bart
Hi Tom,
could you pick this one up as well post release?
Yes, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190704/5fd6e808/attachment.sig>