Skip to contentSkip to conversation

clk: rockchip: undo several noc and special clocks as critical on rk3288

PATCH In review Douglas Anderson 4 participants 5 messages Apr 12, 2019 – Apr 23, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 clk: rockchip: undo several noc and special clocks as critical on rk3288

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark noc and some special clk as critical on rk3288") except that we're keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms of power savings (checking the power on the logic rail). It appears to save maybe 1-2mW. ...but still it seems like we should turn the clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're still keeping critical) from an email thread:

Quoted 12 lines

pmu ahb clock

Function: Clock to pmu module when hibernation and/or ADP is enabled. Must be greater than or equal to 30 MHz.

If the SOC design does not support hibernation/ADP function, only have hclk_otg, this clk can be switched according to the usage of otg. If the SOC design support hibernation/ADP, has two clocks, hclk_otg and pmu_hclk_otg0.
Hclk_otg belongs to the closed part of otg logic, which can be switched according to the use of otg.

Quoted 4 lines

pmu_hclk_otg0 belongs to the always on part.

As for whether pmu_hclk_otg0 can be turned off when otg is not in use, we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to the CPU. CPU functions fine without it on. Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with JTAG. It doesn't seem like it makes sense to waste power for every rk3288 user. In any case to do JTAG you'd need private patches to adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two clocks on only during kernel panics in order to access some coresight registers. Since nothing in the upstream kernel does this we should be able to leave them off safely. Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn these 4 clocks on only when doing DDR transitions and they are off otherwise. I see no reason why they'd need to be on in the upstream kernel which doesn't support DDRFreq.

---

Changes in v2:
- Now keep pmu_hclk_otg0 as critical.
- Updated description since this isn't a clean revert.
- PWM patches have landed, so just one patch in the series now.

 drivers/clk/rockchip/clk-rk3288.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/clk/rockchip/clk-rk3288.c +4 -9
index f47d514cba36..13668ad59f2e 100644
@@ -313,13 +313,13 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", CLK_IGNORE_UNUSED,
 			RK3288_CLKSEL_CON(0), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 6, GFLAGS),
-	COMPOSITE_NOMUX(0, "atclk", "armclk", CLK_IGNORE_UNUSED,
+	COMPOSITE_NOMUX(0, "atclk", "armclk", 0,
 			RK3288_CLKSEL_CON(37), 4, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 7, GFLAGS),
 	COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", CLK_IGNORE_UNUSED,
 			RK3288_CLKSEL_CON(37), 9, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
 			RK3288_CLKGATE_CON(12), 8, GFLAGS),
-	GATE(0, "pclk_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_dbg", "pclk_dbg_pre", 0,
 			RK3288_CLKGATE_CON(12), 9, GFLAGS),
 	GATE(0, "cs_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
 			RK3288_CLKGATE_CON(12), 10, GFLAGS),
@@ -647,7 +647,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	INVERTER(SCLK_HSADC, "sclk_hsadc", "sclk_hsadc_out",
 			RK3288_CLKSEL_CON(22), 7, IFLAGS),
 
-	GATE(0, "jtag", "ext_jtag", CLK_IGNORE_UNUSED,
+	GATE(0, "jtag", "ext_jtag", 0,
 			RK3288_CLKGATE_CON(4), 14, GFLAGS),
 
 	COMPOSITE_NODIV(SCLK_USBPHY480M_SRC, "usbphy480m_src", mux_usbphy480m_p, 0,
@@ -656,7 +656,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
 	COMPOSITE_NODIV(SCLK_HSICPHY480M, "sclk_hsicphy480m", mux_hsicphy480m_p, 0,
 			RK3288_CLKSEL_CON(29), 0, 2, MFLAGS,
 			RK3288_CLKGATE_CON(3), 6, GFLAGS),
-	GATE(0, "hsicphy12m_xin12m", "xin12m", CLK_IGNORE_UNUSED,
+	GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
 			RK3288_CLKGATE_CON(13), 9, GFLAGS),
 	DIV(0, "hsicphy12m_usbphy", "sclk_hsicphy480m", 0,
 			RK3288_CLKSEL_CON(11), 8, 6, DFLAGS),
@@ -837,11 +837,6 @@ static const char *const rk3288_critical_clocks[] __initconst = {
 	"pclk_alive_niu",
 	"pclk_pd_pmu",
 	"pclk_pmu_niu",
-	"pclk_core_niu",
-	"pclk_ddrupctl0",
-	"pclk_publ0",
-	"pclk_ddrupctl1",
-	"pclk_publ1",
 	"pmu_hclk_otg0",
 	/* pwm-regulators on some boards, so handoff-critical later */
 	"pclk_rkpwm",
Signature · 1 line
2.21.0.392.gf8f6787159e-goog
#1 lore raw
Quoted 26 lines · Douglas Anderson

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark noc and some special clk as critical on rk3288") except that we're keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms of power savings (checking the power on the logic rail). It appears to save maybe 1-2mW. ...but still it seems like we should turn the clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're still keeping critical) from an email thread:

Quoted 14 lines

pmu ahb clock

Function: Clock to pmu module when hibernation and/or ADP is enabled. Must be greater than or equal to 30 MHz.

If the SOC design does not support hibernation/ADP function, only have hclk_otg, this clk can be switched according to the usage of otg. If the SOC design support hibernation/ADP, has two clocks, hclk_otg and pmu_hclk_otg0.
Hclk_otg belongs to the closed part of otg logic, which can be switched according to the use of otg.

pmu_hclk_otg0 belongs to the always on part.

Quoted 7 lines
Quoted 2 lines

As for whether pmu_hclk_otg0 can be turned off when otg is not in use, we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to the CPU. CPU functions fine without it on. Maybe needed for JTAG?

FWIW, the two brief references in the TRM imply that's the ATB clock, which would make it part of the CoreSight tracing gubbins[1] - I can't see any evidence that RK3288 has an ETR or ETB for self-hosted tracing, so it may well only be relevant for external trace hardware (wherein GRF_SOC_CON7 suggests that it might spew trace data out of the parallel LCD interface pins).

Quoted 9 lines

jtag: Presumably this clock is only needed if you're debugging with JTAG. It doesn't seem like it makes sense to waste power for every rk3288 user. In any case to do JTAG you'd need private patches to adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two clocks on only during kernel panics in order to access some coresight registers. Since nothing in the upstream kernel does this we should be able to leave them off safely. Maybe also needed for JTAG?

Similarly, pclk_dbg sounds like the APB clock for the CPU external debug interface[2] (which I suspect is probably somewhere in that "A17_Debug" region at 0xffb80000 that the DT doesn't even go near).

I would imagine that as long as a hardware debugger can establish a JTAG/SWD connection to the DAP, it would then have an initialisation script which knows what values to poke where in order to configure additional pinmux/clocks/CoreSight components/etc. to the appropriate state, so I'd hope that Linux shouldn't have to care about those details either way.

Robin.

[1] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0535b/CHDJFFCH.html
[2] http://infocenter.arm.com/help/topic/com.arm.doc.ddi0535b/BABBCDGE.html

Quoted 70 lines

hsicphy12m_xin12m: There is no indication of why this clock would need to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn these 4 clocks on only when doing DDR transitions and they are off otherwise. I see no reason why they'd need to be on in the upstream kernel which doesn't support DDRFreq.

---

Changes in v2:
- Now keep pmu_hclk_otg0 as critical.
- Updated description since this isn't a clean revert.
- PWM patches have landed, so just one patch in the series now.

  drivers/clk/rockchip/clk-rk3288.c | 13 ++++---------
  1 file changed, 4 insertions(+), 9 deletions(-)
drivers/clk/rockchip/clk-rk3288.c +4 -9
index f47d514cba36..13668ad59f2e 100644
@@ -313,13 +313,13 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
  	COMPOSITE_NOMUX(0, "aclk_core_mp", "armclk", CLK_IGNORE_UNUSED,
  			RK3288_CLKSEL_CON(0), 4, 4, DFLAGS | CLK_DIVIDER_READ_ONLY,
  			RK3288_CLKGATE_CON(12), 6, GFLAGS),
-	COMPOSITE_NOMUX(0, "atclk", "armclk", CLK_IGNORE_UNUSED,
+	COMPOSITE_NOMUX(0, "atclk", "armclk", 0,
  			RK3288_CLKSEL_CON(37), 4, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
  			RK3288_CLKGATE_CON(12), 7, GFLAGS),
  	COMPOSITE_NOMUX(0, "pclk_dbg_pre", "armclk", CLK_IGNORE_UNUSED,
  			RK3288_CLKSEL_CON(37), 9, 5, DFLAGS | CLK_DIVIDER_READ_ONLY,
  			RK3288_CLKGATE_CON(12), 8, GFLAGS),
-	GATE(0, "pclk_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
+	GATE(0, "pclk_dbg", "pclk_dbg_pre", 0,
  			RK3288_CLKGATE_CON(12), 9, GFLAGS),
  	GATE(0, "cs_dbg", "pclk_dbg_pre", CLK_IGNORE_UNUSED,
  			RK3288_CLKGATE_CON(12), 10, GFLAGS),
@@ -647,7 +647,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
  	INVERTER(SCLK_HSADC, "sclk_hsadc", "sclk_hsadc_out",
  			RK3288_CLKSEL_CON(22), 7, IFLAGS),
 
-	GATE(0, "jtag", "ext_jtag", CLK_IGNORE_UNUSED,
+	GATE(0, "jtag", "ext_jtag", 0,
  			RK3288_CLKGATE_CON(4), 14, GFLAGS),
 
  	COMPOSITE_NODIV(SCLK_USBPHY480M_SRC, "usbphy480m_src", mux_usbphy480m_p, 0,
@@ -656,7 +656,7 @@ static struct rockchip_clk_branch rk3288_clk_branches[] __initdata = {
  	COMPOSITE_NODIV(SCLK_HSICPHY480M, "sclk_hsicphy480m", mux_hsicphy480m_p, 0,
  			RK3288_CLKSEL_CON(29), 0, 2, MFLAGS,
  			RK3288_CLKGATE_CON(3), 6, GFLAGS),
-	GATE(0, "hsicphy12m_xin12m", "xin12m", CLK_IGNORE_UNUSED,
+	GATE(0, "hsicphy12m_xin12m", "xin12m", 0,
  			RK3288_CLKGATE_CON(13), 9, GFLAGS),
  	DIV(0, "hsicphy12m_usbphy", "sclk_hsicphy480m", 0,
  			RK3288_CLKSEL_CON(11), 8, 6, DFLAGS),
@@ -837,11 +837,6 @@ static const char *const rk3288_critical_clocks[] __initconst = {
  	"pclk_alive_niu",
  	"pclk_pd_pmu",
  	"pclk_pmu_niu",
-	"pclk_core_niu",
-	"pclk_ddrupctl0",
-	"pclk_publ0",
-	"pclk_ddrupctl1",
-	"pclk_publ1",
  	"pmu_hclk_otg0",
  	/* pwm-regulators on some boards, so handoff-critical later */
  	"pclk_rkpwm",
#2 lore raw
In reply to Douglas Anderson

Elaine,

Quoted 56 lines · Douglas Anderson

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark noc and some special clk as critical on rk3288") except that we're keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms of power savings (checking the power on the logic rail). It appears to save maybe 1-2mW. ...but still it seems like we should turn the clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're still keeping critical) from an email thread:

Quoted 12 lines

pmu ahb clock

Function: Clock to pmu module when hibernation and/or ADP is enabled. Must be greater than or equal to 30 MHz.

If the SOC design does not support hibernation/ADP function, only have hclk_otg, this clk can be switched according to the usage of otg. If the SOC design support hibernation/ADP, has two clocks, hclk_otg and pmu_hclk_otg0.
Hclk_otg belongs to the closed part of otg logic, which can be switched according to the use of otg.

Quoted 4 lines

pmu_hclk_otg0 belongs to the always on part.

As for whether pmu_hclk_otg0 can be turned off when otg is not in use, we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to the CPU. CPU functions fine without it on. Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with JTAG. It doesn't seem like it makes sense to waste power for every rk3288 user. In any case to do JTAG you'd need private patches to adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two clocks on only during kernel panics in order to access some coresight registers. Since nothing in the upstream kernel does this we should be able to leave them off safely. Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn these 4 clocks on only when doing DDR transitions and they are off otherwise. I see no reason why they'd need to be on in the upstream kernel which doesn't support DDRFreq.

---

Quoted 7 lines

Changes in v2:
- Now keep pmu_hclk_otg0 as critical.
- Updated description since this isn't a clean revert.
- PWM patches have landed, so just one patch in the series now.

 drivers/clk/rockchip/clk-rk3288.c | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)

From previous discussions I think you're all happy with this patch now, right? Care to give it an official Reviewed-by tag?

-Doug

Reviewed-by
#3 lore raw

hi,

Quoted 62 lines · Doug Anderson

Elaine,

Quoted 59 lines · Douglas Anderson

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark noc and some special clk as critical on rk3288") except that we're keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms of power savings (checking the power on the logic rail). It appears to save maybe 1-2mW. ...but still it seems like we should turn the clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're still keeping critical) from an email thread:

Quoted 12 lines

pmu ahb clock

Function: Clock to pmu module when hibernation and/or ADP is enabled. Must be greater than or equal to 30 MHz.

If the SOC design does not support hibernation/ADP function, only have hclk_otg, this clk can be switched according to the usage of otg. If the SOC design support hibernation/ADP, has two clocks, hclk_otg and pmu_hclk_otg0.
Hclk_otg belongs to the closed part of otg logic, which can be switched according to the use of otg.

Quoted 4 lines

pmu_hclk_otg0 belongs to the always on part.

As for whether pmu_hclk_otg0 can be turned off when otg is not in use, we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to the CPU. CPU functions fine without it on. Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with JTAG. It doesn't seem like it makes sense to waste power for every rk3288 user. In any case to do JTAG you'd need private patches to adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two clocks on only during kernel panics in order to access some coresight registers. Since nothing in the upstream kernel does this we should be able to leave them off safely. Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need to be turned on for boards that don't use HSIC.

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn these 4 clocks on only when doing DDR transitions and they are off otherwise. I see no reason why they'd need to be on in the upstream kernel which doesn't support DDRFreq.

---

Changes in v2:
- Now keep pmu_hclk_otg0 as critical.
- Updated description since this isn't a clean revert.
- PWM patches have landed, so just one patch in the series now.

Quoted 4 lines
Quoted 3 lines
  drivers/clk/rockchip/clk-rk3288.c | 13 ++++---------
  1 file changed, 4 insertions(+), 9 deletions(-)

From previous discussions I think you're all happy with this patch

now, right? Care to give it an official Reviewed-by tag?

Yes.

Quoted 5 lines

-Doug

maintainer
#4 lore raw
In reply to Douglas Anderson

Am Freitag, 12. April 2019, 18:17:47 CEST schrieb Douglas Anderson:

Quoted 47 lines

This is mostly a revert of commit 55bb6a633c33 ("clk: rockchip: mark noc and some special clk as critical on rk3288") except that we're keeping "pmu_hclk_otg0" as critical still.

NOTE: turning these clocks off doesn't seem to do a whole lot in terms of power savings (checking the power on the logic rail). It appears to save maybe 1-2mW. ...but still it seems like we should turn the clocks off if they aren't needed.

About "pmu_hclk_otg0" (the one clock from the original commit we're still keeping critical) from an email thread:

Quoted 12 lines

pmu ahb clock

Function: Clock to pmu module when hibernation and/or ADP is enabled. Must be greater than or equal to 30 MHz.

If the SOC design does not support hibernation/ADP function, only have hclk_otg, this clk can be switched according to the usage of otg. If the SOC design support hibernation/ADP, has two clocks, hclk_otg and pmu_hclk_otg0.
Hclk_otg belongs to the closed part of otg logic, which can be switched according to the use of otg.

Quoted 4 lines

pmu_hclk_otg0 belongs to the always on part.

As for whether pmu_hclk_otg0 can be turned off when otg is not in use, we have not tested. IC suggest make pmu_hclk_otg0 always on.

For the rest of the clocks:

atclk: No documentation about this clock other than that it goes to the CPU. CPU functions fine without it on. Maybe needed for JTAG?

jtag: Presumably this clock is only needed if you're debugging with JTAG. It doesn't seem like it makes sense to waste power for every rk3288 user. In any case to do JTAG you'd need private patches to adjust the pinctrl the mux the JTAG out anyway.

pclk_dbg, pclk_core_niu: On veyron Chromebooks we turn these two clocks on only during kernel panics in order to access some coresight registers. Since nothing in the upstream kernel does this we should be able to leave them off safely. Maybe also needed for JTAG?

hsicphy12m_xin12m: There is no indication of why this clock would need to be turned on for boards that don't use HSIC.

Quoted 6 lines

pclk_ddrupctl[0-1], pclk_publ0[0-1]: On veyron Chromebooks we turn these 4 clocks on only when doing DDR transitions and they are off otherwise. I see no reason why they'd need to be on in the upstream kernel which doesn't support DDRFreq.

applied for 5.2

Thanks
Heiko