mx27: Add basic support for Maxtrack i-MXT TD60
Subsystems (2)
PATCH 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
Signed-off-by Alan Carvalho de Assis <[email protected]>
--- arch/arm/mach-mx2/Kconfig | 7 ++ arch/arm/mach-mx2/Makefile | 1 + arch/arm/mach-mx2/mxt_td60.c | 245 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 253 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-mx2/mxt_td60.c
arch/arm/mach-mx2/Kconfig +7 -0
@@ -104,4 +104,11 @@ config MACH_PCA100 Include support for phyCARD-s (aka pca100) platform. This includes specific configurations for the module and its peripherals. +config MACH_MXT_TD60 + bool "Maxtrack i-MXT TD60" + depends on MACH_MX27 + help + Include support for i-MXT (aka td60) platform. This + includes specific configurations for the module and its peripherals. + endif
arch/arm/mach-mx2/Makefile +1 -0
@@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o obj-$(CONFIG_MACH_PCA100) += pca100.o +obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
arch/arm/mach-mx2/mxt_td60.c new file +245 -0
245 lines not on this page · raw message
Signature · 1 line
1.6.0.4
PATCH 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
Quoted 4 lines · Alan Carvalho de Assis
arch/arm/mach-mx2/mxt_td60.c new file +4
-0+#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h>
arch/arm/mach-mx2/mxt_td60.c line 34
Quoted 10 lines
arch/arm/mach-mx2/mxt_td60.c new file +10
-0+#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <mach/gpio.h>
I see red! linux/gpio.h please.
PATCH 1/1 mx27: Add basic support for Maxtrack i-MXT TD60
Hi Russell,
Quoted 18 lines · Russell King - ARM Linux
Quoted 4 lines · Alan Carvalho de Assis
arch/arm/mach-mx2/mxt_td60.c new file +4
-0+#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/partitions.h> arch/arm/mach-mx2/mxt_td60.c line 34
Quoted 10 lines
arch/arm/mach-mx2/mxt_td60.c new file +10
-0+#include <linux/mtd/physmap.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <mach/common.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <mach/gpio.h> I see red!
linux/gpio.hplease.
Sure, I based on MX27ADS. I will send a new patch.
Thank you,
Alan