Skip to contentSkip to conversation

vmlinux in C360

parisc-linux Mike Hibler 3 participants 3 messages Jul 8, 1999 – Jul 9, 1999

lore
Share & tools
lore
#0 lore raw
Quoted 9 lines

Date: Wed, 07 Jul 1999 22:15:51 -0400
From: Alex deVries <[email protected]>
To: Helge Deller <[email protected]>
Subject: Re: [parisc-linux] vmlinux in C360

Quoted 3 lines · Helge Deller

Hi !

Quoted 9 lines
Quoted 6 lines

Only a little idea, but you could try to set the Boot-Offset for the loaded Image in the
arch/parisc/Makefile from 0x10000 to 0x12000 or higher....
It could be, that we overwrite the PDC & IO-Structures from the BIOS... I think I read something about that in the other parisc-ports.....

Is there any reason not to bump that up to 0x12000 ?

I thought that 0x10000 was the magic value, the PDC using memory below that. However, we do indeed load the Mach kernel at 0x12000 and we load our BSD kernel at 0x11000. I no longer remember the reason, but I'm sure it was a good one! :-)

#1 lore raw
Quoted 9 lines · Mike Hibler
Quoted 9 lines

Date: Wed, 07 Jul 1999 22:15:51 -0400
From: Alex deVries <[email protected]>
To: Helge Deller <[email protected]>
Subject: Re: [parisc-linux] vmlinux in C360

Quoted 3 lines · Helge Deller

Hi !

Quoted 8 lines
Quoted 8 lines
Quoted 6 lines

Only a little idea, but you could try to set the Boot-Offset for the loaded Image in the
arch/parisc/Makefile from 0x10000 to 0x12000 or higher....
It could be, that we overwrite the PDC & IO-Structures from the BIOS... I think I read something about that in the other parisc-ports.....

Is there any reason not to bump that up to 0x12000 ?

No, I don't know... (maybe only theese few unused kilobyte...) Alex, maybe you want to set it higher ? (We could try lower it later again!).

Quoted 4 lines

I thought that 0x10000 was the magic value, the PDC using memory below that. However, we do indeed load the Mach kernel at 0x12000 and we load our BSD kernel at 0x11000. I no longer remember the reason, but I'm sure it was a good one! :-)

Hannu: did you tried, if it worked ?

Helge.

#2 lore raw
Quoted 23 lines · Helge Deller
Quoted 9 lines · Mike Hibler
Quoted 9 lines

Date: Wed, 07 Jul 1999 22:15:51 -0400
From: Alex deVries <[email protected]>
To: Helge Deller <[email protected]>
Subject: Re: [parisc-linux] vmlinux in C360

Quoted 3 lines · Helge Deller

Hi !

Quoted 8 lines
Quoted 8 lines
Quoted 6 lines

Only a little idea, but you could try to set the Boot-Offset for the loaded Image in the
arch/parisc/Makefile from 0x10000 to 0x12000 or higher....
It could be, that we overwrite the PDC & IO-Structures from the BIOS... I think I read something about that in the other parisc-ports.....

Is there any reason not to bump that up to 0x12000 ?

No, I don't know... (maybe only theese few unused kilobyte...) Alex, maybe you want to set it higher ? (We could try lower it later again!).

Quoted 6 lines
Quoted 4 lines

I thought that 0x10000 was the magic value, the PDC using memory below that. However, we do indeed load the Mach kernel at 0x12000 and we load our BSD kernel at 0x11000. I no longer remember the reason, but I'm sure it was a good one! :-)

Hannu: did you tried, if it worked ?

Yes. It works better now. I used the 0x12000.

Now I see following:
----------------------------------------------------------
ISL> hpux /stand/vmlinux

Boot
:disk (8/..........)/stand/vmlinux
397320 + 114688 + 66464 start 0x12000

The kernel has started...
You are running a 0Mhz PA-RISC-Machine with 0MB of RAM. First free address was 0x00000000 (This is the base of the stack). Stacksize = 0x00040000.
First free User-Memory starts now at address 0x00040000 and ends at 0x00090beb.
L
----------------------------------------------------------

I guess that it still tries to say something (Cursor was placed after "L" on last line). The amount of memory and Mhz are also bit incorrect...

Ps. Axex: I have tried couple of times to mail you directly... Did you get those emails?

Btw. Is there going to be anything about paric-linux in LinuxExpo (San Jose 9-12 Aug) or in HP-World? Anyone going there?

Quoted 2 lines

Helge.

- Goodi
"The linuX Files -- The Source is Out There." ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°°º¤ø¤º°`°º¤ø,¸¸,ø¤º°