X : caught signal 11 ?
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 6 lines · Yann Bizeul
I've a little bit more informations.
1) X caught signal 11 and quits each time I go back to a console.
2) X quits each time XScreensaver is launchingIuse the XFree server provided by Release 5
I also have problem 1), though I guess I've managed to disable xscreensaver so X does its built-in blanking thing (with no power saving =( ).
To crash X:
startx
ctrl-cmd-F1
Poof. All gone. If you have xdm set up, xdm reloads (and takes you to vc 7 from wherever you wanted to go in the first place). I'm using platinumfb. Is anyone else out there able to use virtual consoles without X crashing?
-Hollis
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
Well, I switch on and off all the time (I have 6 console VT's and 2 X VT's). I used to get palette problems, but not since I applied anthony tong's patch and rebuilt X. It never died (well, it did in my cobbled pre-R5, but not in the released LinuxPPC 1999).
Quoted 15 lines · Hollis R Blanchard
Quoted 6 lines · Yann Bizeul
I've a little bit more informations.
1) X caught signal 11 and quits each time I go back to a console.
2) X quits each time XScreensaver is launchingIuse the XFree server provided by Release 5
I also have problem 1), though I guess I've managed to disable xscreensaver so X does its built-in blanking thing (with no power saving =( ).
To crash X:
startx
ctrl-cmd-F1
Quoted 8 lines
Poof. All gone. If you have xdm set up, xdm reloads (and takes you to vc 7 from wherever you wanted to go in the first place). I'm using platinumfb. Is anyone else out there able to use virtual consoles without X crashing?
-Hollis
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
Quoted 4 lines · On Tue, 20 Jul 1999 [email protected] wrote:
Well, I switch on and off all the time (I have 6 console VT's and 2 X VT's). I used to get palette problems, but not since I applied anthony tong's patch and rebuilt X. It never died (well, it did in my cobbled pre-R5, but not in the released LinuxPPC 1999).
I see. What video driver are you using? Yann, you too? As I mentioned, I'm using platinumfb on a PowerCenter 132. I'm wondering if it's the driver. I just got Mark Abene's updated driver but haven't had a chance to try it yet (and won't for the rest of the week). For those of you who want to see if it fixes anything, I've put it up at
http://www.andrew.cmu.edu/~hollis/platinumfb.c
-Hollis
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
Hollis,
I have the platinumfb too (7200), and I read your message, tried it and bang, x
was down. I recompiled the kernel with the new driver (I didn't get it from your site it was mailed to me) and it is ok now. I never had this problem before with fvwm and accel X , maybe it is a Xpmac & the driver?
--------
Paul Barrette
Ph.D. Candidate Classics (Latin Literature)
System Administrator
McMaster University
"Oppositaque ad os manu nescio quid taetrum exsibilavit, quod postea Graecum esse affirmabat."
--Petronius
Quoted 8 lines · Hollis R Blanchard
Quoted 4 lines · On Tue, 20 Jul 1999 [email protected] wrote:
Well, I switch on and off all the time (I have 6 console VT's and 2 X VT's). I used to get palette problems, but not since I applied anthony tong's patch and rebuilt X. It never died (well, it did in my cobbled pre-R5, but not in the released LinuxPPC 1999).
Quoted 12 lines
I see. What video driver are you using? Yann, you too? As I mentioned, I'm using platinumfb on a PowerCenter 132. I'm wondering if it's the driver. I just got Mark Abene's updated driver but haven't had a chance to try it yet (and won't for the rest of the week). For those of you who want to see if it fixes anything, I've put it up at
http://www.andrew.cmu.edu/~hollis/platinumfb.c-Hollis
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
Quoted 11 lines · [email protected] wrote:
Quoted 11 lines · Yann Bizeul
Quoted 6 lines
I've a little bit more informations.
1) X caught signal 11 and quits each time I go back to a console.
2) X quits each time XScreensaver is launchingIuse the XFree server provided by Release 5
I also have problem 1), though I guess I've managed to disable xscreensaver so X does its built-in blanking thing (with no power saving =( ).
I have problem 2), but when I'm disabling xscreensaver! I'm using R5 (final) on UMAX J700 with an IMS TwinTurbo 128 (2 Mb VRAM) . Power saving does not work in either ways.
BTW, is anybody knows which arguments to give (for BootX) if I want to remove the "No video driver" options? I've tried a few combinations (like video=imsttfb:vmode:17,cmode:16), but even the console is almost unusable. I think that the only to use the IMS is to check that "No video driver" option.
Simon Piette
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
A message that is not in the archive (sent off-list or not yet received): [email protected]
imsttfb (was Re: X : caught signal 11 ?)
Quoted 6 lines · Ryan Nielsen
Quoted 4 lines
BTW, is anybody knows which arguments to give (for BootX) if I want to remove the "No video driver" options? I've tried a few combinations (like video=imsttfb:vmode:17,cmode:16), but even the console is almost unusable. I think that the only to use the IMS is to check that "No video driver" option.
does video=imsttfb:noaccel work?
Unfortunately no. What would be the advantages if I don't get accelleration? Do you have ans IMS TwinTurbo card?
Simon
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
Quoted 10 lines · Hollis R Blanchard
Quoted 6 lines · Yann Bizeul
I've a little bit more informations.
1) X caught signal 11 and quits each time I go back to a console.
2) X quits each time XScreensaver is launchingIuse the XFree server provided by Release 5
I also have problem 1), though I guess I've managed to disable xscreensaver so X does its built-in blanking thing (with no power saving =( ).
I'm assuming you mean something along the lines of
$ xset s off
Does X have a built in blanking thing other than that? Or is it an Apple hardware thing?
Quoted 9 lines
To crash X:
startx
ctrl-cmd-F1Poof. All gone. If you have xdm set up, xdm reloads (and takes you to vc 7 from wherever you wanted to go in the first place). I'm using platinumfb. Is anyone else out there able to use virtual consoles without X crashing?
I can switch consoles o.k. I'm on a pb3400c so I guess that makes me chips65550fb (?). If I put the machine to sleep for any significant period of time, X dies.
Is this just an xfree problem or is it in xpmac also?
cheers,
cbb
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]