Skip to contentSkip to conversation

8xx updates

DISCUSSION Dan Malek 2 participants 2 messages Sep 15, 1999

lore
Share & tools
lore

Dan Malek

author
#0 lore raw

OK. I just posted all of the outstanding 8xx updates to the CVS tree. Read the web page for more info.

I will probably make mbx_defconfig a generic m8xx_defconfig that will build on all boards. You can then selectively add features you know your board supports. I just haven't found the lowest common denominator yet.

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 2 lines · Dan Malek

OK. I just posted all of the outstanding 8xx updates to the CVS tree. Read the web page for more info.

:)

Quoted 4 lines

I will probably make mbx_defconfig a generic m8xx_defconfig that will build on all boards. You can then selectively add features you know your board supports. I just haven't found the lowest common denominator yet.

Sounds ok.

The other thing that needs to be done is the help documentation. I tend to use "make xconfig" when configuring my kernel. This gives me the ability to load and store configuration files and then only change the bits I need to without going through the entire configuration processes. The other reason is that it has a help button for all the configuration options. I believe "make menuconfig" also has help features. There are so many options that it is hard to remember what all of them do (unless you have read the docs a million times). The 2.2.x and 2.3.x series from kernel mirrors have the help docs but none of the embedded archives (embedded-2.2.5 and mpc8xx-2.3.10) seem to have them. I think its just a matter of copying the help files to the Documentation directory.

Brendan Simon.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/