Skip to contentSkip to conversation

MPC8BUG crashes on Windows 95/98/NT

DISCUSSION Nicolas Pohland 2 participants 4 messages Oct 27, 1999 – Oct 28, 1999

lore
Share & tools
lore
#0 lore raw

Hi,

I am a PPC newbie, but after checking the FAQ and mailing lists I have found a lot of helpful hints but nothing quite addresses my problem.

I am one of the poor sods trying to get a FADS 860T board to work. I have
used the cross compiler tools to generate an image of the embedded-2.2.5 kernel version.

I had to guess a lot of flags - does someone have a FADS 860T config file ?
There seems to be one for everything else ...

I then thought I would just use the MPC8BUG program to program the flash with
the generated image.

Is this the correct way of doing this ? Or do I need a Linux tool chain and
a soldering iron ?

I received my ADI board, read and followed the readme procedure and hooked it up to the FADS. But when I try to start the MPC8BUG or MPC8BUG95 program,
it just crashes under all 3 Windows versions. I have also tried different IO addresses
(0x100, 0x200 and 0x300) and used 2 different PCs (133 and 450 Mhz).

The BIOS of the boards does NOT allow me to set the ISA bus frequency.

The MPC8bug version is 1.6.

Did someone experience also have this problem ?

Or have a viable alternative ?

Any help would be greatly appreciated.

Nicolas Pohland

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 1 line · Nicolas Pohland

Did someone experience also have this problem ?

Yes....

Quoted 1 line

Or have a viable alternative ?

Yes....

Quoted 1 line

Any help would be greatly appreciated.

Go into the e-mail archives and read my past messages. It has helped some people.....and pissed off others.....

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#2 lore raw
Quoted 3 lines · Dan Malek

Go into the e-mail archives and read my past messages. It has helped some people.....and pissed off others.....

Essentially the email lists imply to chuck the FADS. Is this a correct summary ?

I downloaded mpc8bug version 1.5 from
http://www.motorola.com/SPS/ADC/pps/subpgs/etoolbox/8XX/MPC8bug.html
after getting tipped off and this worked under NT 4.0 SP 5 when merging this with the 1.6 configuration files of mpc8bug.

HINTS
-----

ELF files sre supported by LOADF but only after specifying -Ttext to 0x2800000.

The first parameter for mpc8bug is not the base address of the ADI board divided by 0x100. Instead it is the index into the
device list (normally 0).

I will now continue to debug the image unless a tarball with a FADS 860T floats along :-). I will be happy to provide one
once I am finished.

Nicolas

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

#3 lore raw
Quoted 2 lines · Nicolas Pohland

Essentially the email lists imply to chuck the FADS. Is this a correct summary ?

Well, I prefer not to use it because in the past it has not been a pleasant experience for me :-). Just consider how much time you have already spent.....There are other options where you could have been writing your application software within minutes of opening the box.

For some people in big companies with nice salaries, this may not be a problem. For a product and software development consultant like me, assisting start up companies to bring products to market in record time and lowest cost, tools like these are horribly inefficient.

	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/