Send Packets In Prerouting?
Hello, I'm writing a prerouting hook module that modifies packets and sends them back to the source without letting the higher layers know anything about it. Using tcpdump, I see that everything works fine except for the fact that the ethernet header is written incorrectly by dev_queue_xmit. Before I call dev_queue_xmit, the ethernet header is set to zero-- but then it goes writes in the same source/dest as were on it when the packet arrived, and it shouldn't because I manually change the IP's in my hook. I have no idea how macs are chosen even from close inspection of the code for dev_queue_xmit and friends. I thought it would inspect the packet's reversed IP addresses to see which macs to put in before sending it off but this isn't happening as I expect it to. Am I missing something here
? Are there some fields I should set in the sk_buff to let dev_queue_xmit know that it needs to inspect the IP addresses in the packet before choosing/finding MAC addresses?
Here is an abbreviation of the offending code:
//The main hook function
static unsigned int myhook_in_func(unsigned int hooknum,
struct sk_buff *skb,
const struct net_device *in, const struct net_device *out, int (*okfn)(struct sk_buff *))
{
......
MAKE MODIFICATIONS TO THE PACKET HERE INCLUDING CHANGING IP'S
......
//The ethernet header is zero at this point-- I checked.
skb_push(skb, ETH_HLEN);
//Set the packet type to outgoing-- didn't help.
skb->pkt_type = PACKET_OUTGOING;
//Send the packet on the wire; ARP resolution is done somewhere in here..
dev_queue_xmit(skb);
//NF_STOLEN because dev_queue_xmit consumes the skb
return NF_STOLEN;
}The hook is registered in NF_IP_PRE_ROUTING.
Thanks in advance for your help!
--Nader Al-Naji
PS: Wasn't sure whether to post this in the netfilter user list (instead of development) but after reading their questions, it seems to me that this is really more of a development-oriented issue. Please let me know if these kinds of questions actually belong more in the user list.