Diskless 712/60s
I've got access to a moderately large pile of HP 712s, mostly 60s with a few faster ones,
dirt cheap. I'm contemplating trying to use an array of a few dozen of them for tasks like factoring, which need lots of MIPS and RAM but not much communication.
I'd want to use a separate machine as a host and run the 712s diskless and headless. The host would need dual e'net, one for 712 array and one for the world, so I might use a Linux PC. I'd also need a machine for development, presumably a PA-RISC Linux box.
Questions:
Any recommendations for a machine that could be both host (should support dual e'net) and development box (faster than 712, old enough to be available used)?
For the array, what are the trade-offs between using your native Linux vs. the older micro-kernel stuff, with or without Linux atop it? These will mostly be pure compute engines, 100% of CPU into a single process for hours or days at a time. All they really need to do is boot from the net, load one process, and exchange occasional packets with the host. Multitasking, the ability to access a file system via NFS, to run PVM, to report status via SNMP, ... would definitely be nice, but aren't actually essential.
Virtual memory would be a detriment. How hard is it to eliminate?
What is the state of PA-RISC Linux for this application? The only device driver I'd need is ethernet.
P.S. A friend has a large pile of used HP machines, mostly at reasonable prices. 712s are the low end of the range. Anyone in the Ottawa area who needs some, send mail.