Open Sourced Glide on Linux PPC
Hi,
maybe you already know that Glide is Open Sourced, so I gave it a shot compiling it on Linux/PPC, before disassembling my PC to get out the VooDoo 1 and move it into the PMac.
There are some obvious problems, like -m486 compiler switches, or an undefined P6FENCE macro. But now I'm stuck: in fxlinux.c are references to inb() & Co. , and they expand to something using isa_io_base, which is undefined on my machine. Even funnier because I don't have ISA slots at all (PMac).
I'm using a 2.2.3 kernel, and it's quite possible that I messed up some headers while building other stuff.
Questions:
- Has anybody had any success compiling Glide/Linux/PPC/VooDoo1 ?
- Is this isa_io_base thingy changed in newer kernels, or did I just mix up my configuration ? I don't really like downloading kernels/patches through my slow connections, so I'd like to be sure...
Thanks,
Jens
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Link, was Re: Open Sourced Glide on Linux PPD
Okay, anybody looking for the link:
Has PDF files with the register docs, examples, and the glide sourcecode. For the lazy people (like me), a direct link to the relevant page:
http://linux.3dfx.com/open_source/glide_kit.htm
Idea: maybe we should drop the pci-interface, and just port the /dev/3dfx driver and interface. I got the 3dfx driver to compile some time ago, but that was with an older kernal. But if I remeber correctly it detected the Glide card already.
Jens
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
Quoted 12 lines · Jens Ch. Restemeier
maybe you already know that Glide is Open Sourced, so I gave it a shot compiling it on Linux/PPC, before disassembling my PC to get out the VooDoo 1 and move it into the PMac.
There are some obvious problems, like -m486 compiler switches, or an undefined P6FENCE macro. But now I'm stuck: in
fxlinux.care references toinb()& Co. , and they expand to something usingisa_io_base, which is undefined on my machine. Even funnier because I don't have ISA slots at all (PMac).
I'm using a 2.2.3 kernel, and it's quite possible that I messed up some headers while building other stuff.
Quoted 5 lines
Questions:
- Has anybody had any success compiling Glide/Linux/PPC/VooDoo1 ?
- Is thisisa_io_basethingy changed in newer kernels, or did I just mix up my configuration ? I don't really like downloading kernels/patches through my slow connections, so I'd like to be sure...
ISA I/O space' is the same as PCI I/O space'. Before you can access it on PPC using inb() and friends, you have to mmap() it, like
unsigned long isa_io_base;
int io_fd;
if ((io_fd = open("/dev/mem", O_RDWR)) == -1) {
perror("open /dev/mem");
exit(1);
}
isa_io_base = mmap(0, 0x10000, PROT_WRITE|PROT_EXEC|PROT_READ, MAP_SHARED,
io_fd, MB_ISA_IO_BASE);
if ((long)isa_io_base == -1) {
perror("mmaping io space");
exit(1);
}The bad thing is that MB_ISA_IO_BASE depends on the machine type. Look at linux/include/asm-ppc/io.h for the different values for different machines. On Pmac, isa_io_base seems to be set up in arch/ppc/kernel/pmac_pci.c.
And if the original code contains iopl() calls, you have to protect them inside #ifdef __i386__/#endif pairs.
Good luck!
Gr{oetje,eeting}s,
--
Geert Uytterhoeven -- Linux/{m68k~Amiga,PPC~CHRP} -- [email protected]
In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/