Skip to contentSkip to conversation

LILO and booting from DiskOnChip

DISCUSSION Mr. Oogie Boogie 2 participants 2 messages Mar 17, 2000 – Mar 18, 2000 Memory technology devices (MTD)

lore
Share & tools
lore
#0 lore raw

Hello All,

Sorry to butt in but I hope this is an appropriate group for my problem. I have a Mighty Mite carrier board with a DiskOnChip 2000. I am using the Linux v2.2 drivers from M-Systems with kernel v2.2.13.

Simply, when boot/root is set to the DoC, kernel messages during bootup *do not* appear over the serial line. Strangely, when a boot floppy (identical kernel) is used with the DoC as root the kernel messages *do* appear over the serial line.

Has anyone encountered this problem before?

Do you think this is an error with the DoC or kernel?

Any helpful suggestions on how I can fix this?

Thanks for your time,

Ralph A. Preston
The MITRE Corporation
202 Burlington Road, MS E015
Bedford, MA 01730-1420
Work: 781-271-7914 Fax: 781-271-8875 Cell: 617-257-2695

To unsubscribe, send "unsubscribe mtd" to [email protected]

#1 lore raw

Hi Ralph,

Quoted 6 lines · Mr. Oogie Boogie

Simply, when boot/root is set to the DoC, kernel messages during bootup *do not* appear over the serial line. Strangely, when a boot floppy (identical kernel) is used with the DoC as root the kernel messages *do* appear over the serial line.

Has anyone encountered this problem before?

yes.

Quoted 1 line

Do you think this is an error with the DoC or kernel?

neither. the LILO you're using is stripped and doesn't parse any commandline-parameters you want to pass to the kernel.

Quoted 1 line

Any helpful suggestions on how I can fix this?

I patched the kernel (just calling the function that is called when a console=-parameter shows up in the commandline upon kernel init).

Works like a charm.

Count

P.S: Please fix your From:-Header

Signature · 8 lines
  -= Andreas Kotes - mailto:[email protected] - Questions? Just ask =-
 -= Are you doing what you are able to do to support peace on earth? =-
-= Commercial use of my email address NOT allowed. PGP key available. =-




To unsubscribe, send "unsubscribe mtd" to [email protected]