Skip to contentSkip to conversation

prio

LARTC kasp 1 participant 1 message Dec 25, 2004

lore
Share & tools
lore

kasp

author
#0 lore raw

Hi!

Could somebody tell me, what is difference between these two prio parameters in http://lartc.org/lartc.html#AEN2241

1) tc class add dev $DEV parent 1:1 classid 1:10 htb rate ${UPLINK}kbit burst 6k prio 1

                                                                                 ^^^^^^

AND

2) tc filter add dev $DEV parent 1:0 protocol ip prio 10 u32 match ip tos 0x10 0xff flowid 1:10

                                                 ^^^^^^^

Why they aren't equal?
Is there some rules to set prio for each of them?

Signature · 6 lines
Best regards,
 kasp                          mailto:[email protected]

_______________________________________________
LARTC mailing list / [email protected]
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/