e1000_netpoll() , BUG: sleeping function called from invalid context
Subsystems (2)
Hi all,
while poking at a different issue I found the following on my logs :
[85362.132770] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110 [85362.132771] in_atomic(): 1, irqs_disabled(): 1, pid: 1153, name: systemd-journal [85362.132772] no locks held by systemd-journal/1153. [85362.132772] irq event stamp: 60088359 [85362.132777] hardirqs last enabled at (60088359): [<ffffffff810d07c2>] vprintk_emit+0x432/0x470 [85362.132779] hardirqs last disabled at (60088358): [<ffffffff810d03ec>] vprintk_emit+0x5c/0x470 [85362.132782] softirqs last enabled at (60088258): [<ffffffff810688fd>] __do_softirq+0x22d/0x290 [85362.132784] softirqs last disabled at (60088233): [<ffffffff81068c0a>] irq_exit+0x6a/0xd0 [85362.132784] Preemption disabled at: [85362.132787] [<ffffffff815203de>] write_msg+0x4e/0xf0 [85362.132790] CPU: 0 PID: 1153 Comm: systemd-journal Tainted: G I 4.10.0-rc8-debug-00001-ga1015e374d94-dirty #5 [85362.132791] Hardware name: FUJITSU PRIMERGY TX200 S5 /D2709, BIOS 6.00 Rev. 1.14.2709 02/04/2013 [85362.132792] Call Trace: [85362.132796] dump_stack+0x86/0xc1 [85362.132799] ___might_sleep+0x213/0x230 [85362.132801] __might_sleep+0x6b/0x80 [85362.132803] synchronize_irq+0x33/0x90 [85362.132805] ? __irq_put_desc_unlock+0x19/0x40 [85362.132807] ? __disable_irq_nosync+0x4e/0x60 [85362.132808] disable_irq+0x17/0x20 [85362.132810] e1000_netpoll+0x3d/0x110 [85362.132813] netpoll_poll_dev+0xa0/0x170 [85362.132814] netpoll_send_skb_on_dev+0x1ab/0x2b0 [85362.132816] netpoll_send_udp+0x417/0x450 [85362.132817] write_msg+0xdb/0xf0 [85362.132819] console_unlock+0x2e5/0x430 [85362.132821] ? __down_trylock_console_sem+0x41/0x60 [85362.132822] vprintk_emit+0x456/0x470 [85362.132825] printk_emit+0x2e/0x36 [85362.132827] ? simple_strtoull+0x2c/0x50 [85362.132829] devkmsg_write+0x115/0x160 [85362.132831] do_iter_readv_writev+0xd8/0x100 [85362.132833] do_readv_writev+0xdf/0x220 [85362.132835] ? __might_fault+0x37/0x90 [85362.132838] ? entry_SYSCALL_64_fastpath+0x5/0xc2 [85362.132839] vfs_writev+0x3a/0x50 [85362.132841] do_writev+0x4c/0xd0 [85362.132842] SyS_writev+0xb/0x10 [85362.132843] entry_SYSCALL_64_fastpath+0x1f/0xc2 [85362.132845] RIP: 0033:0x7fc6d305c46d [85362.132846] RSP: 002b:00007ffca94161e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 [85362.132847] RAX: ffffffffffffffda RBX: ffffffff813afad3 RCX: 00007fc6d305c46d [85362.132848] RDX: 0000000000000005 RSI: 00007ffca94162f0 RDI: 0000000000000006 [85362.132849] RBP: ffffc9000d4c3f88 R08: 0000000000000000 R09: 0000000000000008 [85362.132850] R10: 0000000000000069 R11: 0000000000000293 R12: 00007ffca94162f0 [85362.132851] R13: 000055768b19c920 R14: 00007ffca9416330 R15: 00007ffca94163c0 [85362.132853] ? __this_cpu_preempt_check+0x13/0x20
Seems to be introduced by :
commit 311191297125156319be8f86d546ea1c569f7e95
Author: WANG Cong <[email protected]> Date: Sat Dec 10 14:22:42 2016 -0800
e1000: use disable_hardirq() for e1000_netpoll()
...
The used config can be found there:
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/config-rcx
Regards,
Gabriel C
Quoted 25 lines · Gabriel C
Hi all,
while poking at a different issue I found the following on my logs :
[85362.132770] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110 [85362.132771] in_atomic(): 1, irqs_disabled(): 1, pid: 1153, name: systemd-journal [85362.132772] no locks held by systemd-journal/1153. [85362.132772] irq event stamp: 60088359 [85362.132777] hardirqs last enabled at (60088359): [<ffffffff810d07c2>] vprintk_emit+0x432/0x470 [85362.132779] hardirqs last disabled at (60088358): [<ffffffff810d03ec>] vprintk_emit+0x5c/0x470 [85362.132782] softirqs last enabled at (60088258): [<ffffffff810688fd>] __do_softirq+0x22d/0x290 [85362.132784] softirqs last disabled at (60088233): [<ffffffff81068c0a>] irq_exit+0x6a/0xd0 [85362.132784] Preemption disabled at: [85362.132787] [<ffffffff815203de>] write_msg+0x4e/0xf0 [85362.132790] CPU: 0 PID: 1153 Comm: systemd-journal Tainted: G I 4.10.0-rc8-debug-00001-ga1015e374d94-dirty #5 [85362.132791] Hardware name: FUJITSU PRIMERGYTX200 S5 /D2709, BIOS 6.00 Rev. 1.14.2709
02/04/2013
Quoted 8 lines
[85362.132792] Call Trace: [85362.132796] dump_stack+0x86/0xc1 [85362.132799] ___might_sleep+0x213/0x230 [85362.132801] __might_sleep+0x6b/0x80 [85362.132803] synchronize_irq+0x33/0x90 [85362.132805] ? __irq_put_desc_unlock+0x19/0x40 [85362.132807] ? __disable_irq_nosync+0x4e/0x60 [85362.132808] disable_irq+0x17/0x20
Hmm, your kernel base version is 4.10.0-rc8 but the symbols here look like prior to my commit, because with my commit here should be disable_hardirq() calling synchronize_hardirq().
Did you revert it or make any local changes?
Quoted 53 lines
[85362.132810] e1000_netpoll+0x3d/0x110 [85362.132813] netpoll_poll_dev+0xa0/0x170 [85362.132814] netpoll_send_skb_on_dev+0x1ab/0x2b0 [85362.132816] netpoll_send_udp+0x417/0x450 [85362.132817] write_msg+0xdb/0xf0 [85362.132819] console_unlock+0x2e5/0x430 [85362.132821] ? __down_trylock_console_sem+0x41/0x60 [85362.132822] vprintk_emit+0x456/0x470 [85362.132825] printk_emit+0x2e/0x36 [85362.132827] ? simple_strtoull+0x2c/0x50 [85362.132829] devkmsg_write+0x115/0x160 [85362.132831] do_iter_readv_writev+0xd8/0x100 [85362.132833] do_readv_writev+0xdf/0x220 [85362.132835] ? __might_fault+0x37/0x90 [85362.132838] ? entry_SYSCALL_64_fastpath+0x5/0xc2 [85362.132839] vfs_writev+0x3a/0x50 [85362.132841] do_writev+0x4c/0xd0 [85362.132842] SyS_writev+0xb/0x10 [85362.132843] entry_SYSCALL_64_fastpath+0x1f/0xc2 [85362.132845] RIP: 0033:0x7fc6d305c46d [85362.132846] RSP: 002b:00007ffca94161e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 [85362.132847] RAX: ffffffffffffffda RBX: ffffffff813afad3 RCX: 00007fc6d305c46d [85362.132848] RDX: 0000000000000005 RSI: 00007ffca94162f0 RDI: 0000000000000006 [85362.132849] RBP: ffffc9000d4c3f88 R08: 0000000000000000 R09: 0000000000000008 [85362.132850] R10: 0000000000000069 R11: 0000000000000293 R12: 00007ffca94162f0 [85362.132851] R13: 000055768b19c920 R14: 00007ffca9416330 R15: 00007ffca94163c0 [85362.132853] ? __this_cpu_preempt_check+0x13/0x20Seems to be introduced by :
commit
311191297125156319be8f86d546ea1c569f7e95Author: WANG Cong <[email protected]> Date: Sat Dec 10 14:22:42 2016 -0800e1000: use disable_hardirq() for e1000_netpoll()...
The used config can be found there:
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/config-rcx
Regards,
Gabriel C
Quoted 36 lines · Cong Wang
Quoted 25 lines · Gabriel C
Hi all,
while poking at a different issue I found the following on my logs :
[85362.132770] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110 [85362.132771] in_atomic(): 1, irqs_disabled(): 1, pid: 1153, name: systemd-journal [85362.132772] no locks held by systemd-journal/1153. [85362.132772] irq event stamp: 60088359 [85362.132777] hardirqs last enabled at (60088359): [<ffffffff810d07c2>] vprintk_emit+0x432/0x470 [85362.132779] hardirqs last disabled at (60088358): [<ffffffff810d03ec>] vprintk_emit+0x5c/0x470 [85362.132782] softirqs last enabled at (60088258): [<ffffffff810688fd>] __do_softirq+0x22d/0x290 [85362.132784] softirqs last disabled at (60088233): [<ffffffff81068c0a>] irq_exit+0x6a/0xd0 [85362.132784] Preemption disabled at: [85362.132787] [<ffffffff815203de>] write_msg+0x4e/0xf0 [85362.132790] CPU: 0 PID: 1153 Comm: systemd-journal Tainted: G I 4.10.0-rc8-debug-00001-ga1015e374d94-dirty #5 [85362.132791] Hardware name: FUJITSU PRIMERGYTX200 S5 /D2709, BIOS 6.00 Rev. 1.14.2709
02/04/2013Quoted 8 lines
[85362.132792] Call Trace: [85362.132796] dump_stack+0x86/0xc1 [85362.132799] ___might_sleep+0x213/0x230 [85362.132801] __might_sleep+0x6b/0x80 [85362.132803] synchronize_irq+0x33/0x90 [85362.132805] ? __irq_put_desc_unlock+0x19/0x40 [85362.132807] ? __disable_irq_nosync+0x4e/0x60 [85362.132808] disable_irq+0x17/0x20
Quoted 5 lines
Hmm, your kernel base version is 4.10.0-rc8 but the symbols here look like prior to my commit, because with my commit here should be
disable_hardirq()callingsynchronize_hardirq().Did you revert it or make any local changes?
The kernel is -rc8 with reverted d966564fcdc19e13eb6ba1fbe6b8101070339c3d
+ http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?id=202461e2f3c15dbfb05825d29ace0d20cdf55fa4
+ an debug patch from Thomas to find these goldfish issues.
( http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/goldfish-debug.patch )
No other changes..
Quoted 55 lines
Quoted 55 lines
[85362.132810] e1000_netpoll+0x3d/0x110 [85362.132813] netpoll_poll_dev+0xa0/0x170 [85362.132814] netpoll_send_skb_on_dev+0x1ab/0x2b0 [85362.132816] netpoll_send_udp+0x417/0x450 [85362.132817] write_msg+0xdb/0xf0 [85362.132819] console_unlock+0x2e5/0x430 [85362.132821] ? __down_trylock_console_sem+0x41/0x60 [85362.132822] vprintk_emit+0x456/0x470 [85362.132825] printk_emit+0x2e/0x36 [85362.132827] ? simple_strtoull+0x2c/0x50 [85362.132829] devkmsg_write+0x115/0x160 [85362.132831] do_iter_readv_writev+0xd8/0x100 [85362.132833] do_readv_writev+0xdf/0x220 [85362.132835] ? __might_fault+0x37/0x90 [85362.132838] ? entry_SYSCALL_64_fastpath+0x5/0xc2 [85362.132839] vfs_writev+0x3a/0x50 [85362.132841] do_writev+0x4c/0xd0 [85362.132842] SyS_writev+0xb/0x10 [85362.132843] entry_SYSCALL_64_fastpath+0x1f/0xc2 [85362.132845] RIP: 0033:0x7fc6d305c46d [85362.132846] RSP: 002b:00007ffca94161e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 [85362.132847] RAX: ffffffffffffffda RBX: ffffffff813afad3 RCX: 00007fc6d305c46d [85362.132848] RDX: 0000000000000005 RSI: 00007ffca94162f0 RDI: 0000000000000006 [85362.132849] RBP: ffffc9000d4c3f88 R08: 0000000000000000 R09: 0000000000000008 [85362.132850] R10: 0000000000000069 R11: 0000000000000293 R12: 00007ffca94162f0 [85362.132851] R13: 000055768b19c920 R14: 00007ffca9416330 R15: 00007ffca94163c0 [85362.132853] ? __this_cpu_preempt_check+0x13/0x20Seems to be introduced by :
commit
311191297125156319be8f86d546ea1c569f7e95Author: WANG Cong <[email protected]> Date: Sat Dec 10 14:22:42 2016 -0800e1000: use disable_hardirq() for e1000_netpoll()...
The used config can be found there:
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/config-rcx
Regards,
Gabriel C
Quoted 43 lines · Gabriel C
Quoted 40 lines · Cong Wang
Quoted 25 lines · Gabriel C
Hi all,
while poking at a different issue I found the following on my logs :
[85362.132770] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110 [85362.132771] in_atomic(): 1, irqs_disabled(): 1, pid: 1153, name: systemd-journal [85362.132772] no locks held by systemd-journal/1153. [85362.132772] irq event stamp: 60088359 [85362.132777] hardirqs last enabled at (60088359): [<ffffffff810d07c2>] vprintk_emit+0x432/0x470 [85362.132779] hardirqs last disabled at (60088358): [<ffffffff810d03ec>] vprintk_emit+0x5c/0x470 [85362.132782] softirqs last enabled at (60088258): [<ffffffff810688fd>] __do_softirq+0x22d/0x290 [85362.132784] softirqs last disabled at (60088233): [<ffffffff81068c0a>] irq_exit+0x6a/0xd0 [85362.132784] Preemption disabled at: [85362.132787] [<ffffffff815203de>] write_msg+0x4e/0xf0 [85362.132790] CPU: 0 PID: 1153 Comm: systemd-journal Tainted: G I 4.10.0-rc8-debug-00001-ga1015e374d94-dirty #5 [85362.132791] Hardware name: FUJITSU PRIMERGYTX200 S5 /D2709, BIOS 6.00 Rev. 1.14.2709
02/04/2013Quoted 8 lines
[85362.132792] Call Trace: [85362.132796] dump_stack+0x86/0xc1 [85362.132799] ___might_sleep+0x213/0x230 [85362.132801] __might_sleep+0x6b/0x80 [85362.132803] synchronize_irq+0x33/0x90 [85362.132805] ? __irq_put_desc_unlock+0x19/0x40 [85362.132807] ? __disable_irq_nosync+0x4e/0x60 [85362.132808] disable_irq+0x17/0x20Hmm, your kernel base version is 4.10.0-rc8 but the symbols here look like prior to my commit, because with my commit here should be
disable_hardirq()callingsynchronize_hardirq().
Quoted 9 lines
Quoted 1 line
Did you revert it or make any local changes?
The kernel is -rc8 with reverted
d966564fcdc19e13eb6ba1fbe6b8101070339c3d
+ http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?id=202461e2f3c15dbfb05825d29ace0d20cdf55fa4
+ an debug patch from Thomas to find these goldfish issues.
( http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/goldfish-debug.patch )No other changes..
Forgot to tell , netconsole is running on that box ..
Quoted 56 lines
Quoted 56 lines
Quoted 56 lines
[85362.132810] e1000_netpoll+0x3d/0x110 [85362.132813] netpoll_poll_dev+0xa0/0x170 [85362.132814] netpoll_send_skb_on_dev+0x1ab/0x2b0 [85362.132816] netpoll_send_udp+0x417/0x450 [85362.132817] write_msg+0xdb/0xf0 [85362.132819] console_unlock+0x2e5/0x430 [85362.132821] ? __down_trylock_console_sem+0x41/0x60 [85362.132822] vprintk_emit+0x456/0x470 [85362.132825] printk_emit+0x2e/0x36 [85362.132827] ? simple_strtoull+0x2c/0x50 [85362.132829] devkmsg_write+0x115/0x160 [85362.132831] do_iter_readv_writev+0xd8/0x100 [85362.132833] do_readv_writev+0xdf/0x220 [85362.132835] ? __might_fault+0x37/0x90 [85362.132838] ? entry_SYSCALL_64_fastpath+0x5/0xc2 [85362.132839] vfs_writev+0x3a/0x50 [85362.132841] do_writev+0x4c/0xd0 [85362.132842] SyS_writev+0xb/0x10 [85362.132843] entry_SYSCALL_64_fastpath+0x1f/0xc2 [85362.132845] RIP: 0033:0x7fc6d305c46d [85362.132846] RSP: 002b:00007ffca94161e0 EFLAGS: 00000293 ORIG_RAX: 0000000000000014 [85362.132847] RAX: ffffffffffffffda RBX: ffffffff813afad3 RCX: 00007fc6d305c46d [85362.132848] RDX: 0000000000000005 RSI: 00007ffca94162f0 RDI: 0000000000000006 [85362.132849] RBP: ffffc9000d4c3f88 R08: 0000000000000000 R09: 0000000000000008 [85362.132850] R10: 0000000000000069 R11: 0000000000000293 R12: 00007ffca94162f0 [85362.132851] R13: 000055768b19c920 R14: 00007ffca9416330 R15: 00007ffca94163c0 [85362.132853] ? __this_cpu_preempt_check+0x13/0x20Seems to be introduced by :
commit
311191297125156319be8f86d546ea1c569f7e95Author: WANG Cong <[email protected]> Date: Sat Dec 10 14:22:42 2016 -0800e1000: use disable_hardirq() for e1000_netpoll()...
The used config can be found there:
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/config-rcx
Regards,
Gabriel C
Quoted 58 lines · Gabriel C
Quoted 40 lines · Cong Wang
Quoted 27 lines · Gabriel C
Hi all,
while poking at a different issue I found the following on my logs :
[85362.132770] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110 [85362.132771] in_atomic(): 1, irqs_disabled(): 1, pid: 1153, name: systemd-journal [85362.132772] no locks held by systemd-journal/1153. [85362.132772] irq event stamp: 60088359 [85362.132777] hardirqs last enabled at (60088359): [<ffffffff810d07c2>] vprintk_emit+0x432/0x470 [85362.132779] hardirqs last disabled at (60088358): [<ffffffff810d03ec>] vprintk_emit+0x5c/0x470 [85362.132782] softirqs last enabled at (60088258): [<ffffffff810688fd>] __do_softirq+0x22d/0x290 [85362.132784] softirqs last disabled at (60088233): [<ffffffff81068c0a>] irq_exit+0x6a/0xd0 [85362.132784] Preemption disabled at: [85362.132787] [<ffffffff815203de>] write_msg+0x4e/0xf0 [85362.132790] CPU: 0 PID: 1153 Comm: systemd-journal Tainted: G I 4.10.0-rc8-debug-00001-ga1015e374d94-dirty #5 [85362.132791] Hardware name: FUJITSU PRIMERGYTX200 S5 /D2709, BIOS 6.00 Rev. 1.14.2709
02/04/2013Quoted 8 lines
[85362.132792] Call Trace: [85362.132796] dump_stack+0x86/0xc1 [85362.132799] ___might_sleep+0x213/0x230 [85362.132801] __might_sleep+0x6b/0x80 [85362.132803] synchronize_irq+0x33/0x90 [85362.132805] ? __irq_put_desc_unlock+0x19/0x40 [85362.132807] ? __disable_irq_nosync+0x4e/0x60 [85362.132808] disable_irq+0x17/0x20Quoted 5 lines
Hmm, your kernel base version is 4.10.0-rc8 but the symbols here look like prior to my commit, because with my commit here should be
disable_hardirq()callingsynchronize_hardirq().Did you revert it or make any local changes?
The kernel is -rc8 with reverted
d966564fcdc19e13eb6ba1fbe6b8101070339c3d+
http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?id=202461e2f3c15dbfb05825d29ace0d20cdf55fa4
+ an debug patch from Thomas to find these goldfish issues.
(
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/goldfish-debug.patch
)
Quoted 1 line
No other changes..
That is weird, the stack trace doesn't match the source code for some reason. Can you objdump your e1000.ko module to see if that is true?
Quoted 59 lines · Cong Wang
Quoted 58 lines · Gabriel C
Quoted 40 lines · Cong Wang
Quoted 27 lines · Gabriel C
Hi all,
while poking at a different issue I found the following on my logs :
[85362.132770] BUG: sleeping function called from invalid context at kernel/irq/manage.c:110 [85362.132771] in_atomic(): 1, irqs_disabled(): 1, pid: 1153, name: systemd-journal [85362.132772] no locks held by systemd-journal/1153. [85362.132772] irq event stamp: 60088359 [85362.132777] hardirqs last enabled at (60088359): [<ffffffff810d07c2>] vprintk_emit+0x432/0x470 [85362.132779] hardirqs last disabled at (60088358): [<ffffffff810d03ec>] vprintk_emit+0x5c/0x470 [85362.132782] softirqs last enabled at (60088258): [<ffffffff810688fd>] __do_softirq+0x22d/0x290 [85362.132784] softirqs last disabled at (60088233): [<ffffffff81068c0a>] irq_exit+0x6a/0xd0 [85362.132784] Preemption disabled at: [85362.132787] [<ffffffff815203de>] write_msg+0x4e/0xf0 [85362.132790] CPU: 0 PID: 1153 Comm: systemd-journal Tainted: G I 4.10.0-rc8-debug-00001-ga1015e374d94-dirty #5 [85362.132791] Hardware name: FUJITSU PRIMERGYTX200 S5 /D2709, BIOS 6.00 Rev. 1.14.2709
02/04/2013Quoted 8 lines
[85362.132792] Call Trace: [85362.132796] dump_stack+0x86/0xc1 [85362.132799] ___might_sleep+0x213/0x230 [85362.132801] __might_sleep+0x6b/0x80 [85362.132803] synchronize_irq+0x33/0x90 [85362.132805] ? __irq_put_desc_unlock+0x19/0x40 [85362.132807] ? __disable_irq_nosync+0x4e/0x60 [85362.132808] disable_irq+0x17/0x20Quoted 5 lines
Hmm, your kernel base version is 4.10.0-rc8 but the symbols here look like prior to my commit, because with my commit here should be
disable_hardirq()callingsynchronize_hardirq().Did you revert it or make any local changes?
The kernel is -rc8 with reverted
d966564fcdc19e13eb6ba1fbe6b8101070339c3d+
http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?id=202461e2f3c15dbfb05825d29ace0d20cdf55fa4
+ an debug patch from Thomas to find these goldfish issues.
(
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/goldfish-debug.patch
)
Quoted 5 lines
Quoted 1 line
No other changes..
That is weird, the stack trace doesn't match the source code for some reason. Can you objdump your e1000.ko module to see if that is true?
My card seems to use the e1000e driver which is buit-in..
Anyway here an objdump -x :
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/objdump-x_e1000.ko.txt
Quoted 7 lines · Gabriel C
My card seems to use the e1000e driver which is buit-in..
Anyway here an objdump -x :
http://ftp.frugalware.org/pub/other/people/crazy/kernel/t/objdump-x_e1000.ko.txt
Found disable_hardirq() but not disable_irq().
Are you sure the kernel warning was emitted by this binary rather than some old one?
Quoted 6 lines · Cong Wang
Quoted 5 lines · Gabriel C
My card seems to use the e1000e driver which is buit-in..
Anyway here an objdump -x :
Quoted 8 lines
Found
disable_hardirq()but notdisable_irq().Are you sure the kernel warning was emitted by this binary rather than some old one?
Yes , I use an clean build , remove any other files in /boot && /lib/modules before installing the new build kernel.
I've asked Thomas before I send this to lkml and to you and he said :
..
It's a real issue. netconsole calls disable_irq() which might sleep from an interrupt and preemption disabled context.
Quoted 6 lines
[85362.132801] __might_sleep+0x6b/0x80 [85362.132803] synchronize_irq+0x33/0x90 [85362.132805] ? __irq_put_desc_unlock+0x19/0x40 [85362.132807] ? __disable_irq_nosync+0x4e/0x60 [85362.132808] disable_irq+0x17/0x20 [85362.132810] e1000_netpoll+0x3d/0x110
Though, what's weird is that the e1000_netpoll() does not longer call disable_irq(). It calls disable_hardirq().
That got changed in commit 3111912971251 which got into Linus tree during the 4.10 merge window. So it is in 4.10-rc8.
Confused.
...
Quoted 4 lines · Gabriel C
That got changed in commit 3111912971251 which got into Linus tree during the 4.10 merge window. So it is in 4.10-rc8.
Confused.
I'm still confused. Gabriel, can you please try to reproduce with 4.10 final?
Thanks,
tglx
Quoted 9 lines · Thomas Gleixner
Quoted 4 lines · Gabriel C
That got changed in commit 3111912971251 which got into Linus tree during the 4.10 merge window. So it is in 4.10-rc8.
Confused.
I'm still confused. Gabriel, can you please try to reproduce with 4.10 final?
Sure , do you want plain 4.10.0 or 4.10.1 ?
Btw is possible to rename e1000_netpoll() from e1000e driver to e1000e_netpoll() so we know what driver is in use ?
My card uses the e1000e driver..
Regard,
Gabriel
Quoted 7 lines · Gabriel C
Quoted 6 lines · Thomas Gleixner
Quoted 4 lines · Gabriel C
That got changed in commit 3111912971251 which got into Linus tree during the 4.10 merge window. So it is in 4.10-rc8.
Confused.
Quoted 8 lines
Quoted 3 lines
I'm still confused. Gabriel, can you please try to reproduce with 4.10 final?
Sure , do you want plain 4.10.0 or 4.10.1 ?
Btw is possible to rename
e1000_netpoll()from e1000e driver toe1000e_netpoll()so we know what driver is in use ?
Grr. yes. That would be definitely helpful. I was staring into the wrong one of course.
Quoted 1 line
My card uses the e1000e driver..
Does the patch below fix it?
Thanks,
tglx
8<--------------
drivers/net/ethernet/intel/e1000e/netdev.c +3 -3
@@ -6716,19 +6716,19 @@ static irqreturn_t e1000_intr_msix(int _ vector =0 ; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_rx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_tx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_msix_other (msix_irq, netdev);enable_irq (msix_irq); }
Quoted 17 lines · Thomas Gleixner
Quoted 7 lines · Gabriel C
Quoted 6 lines · Thomas Gleixner
Quoted 4 lines · Gabriel C
That got changed in commit 3111912971251 which got into Linus tree during the 4.10 merge window. So it is in 4.10-rc8.
Confused.
Quoted 8 lines
Quoted 3 lines
I'm still confused. Gabriel, can you please try to reproduce with 4.10 final?
Sure , do you want plain 4.10.0 or 4.10.1 ?
Btw is possible to rename
e1000_netpoll()from e1000e driver toe1000e_netpoll()so we know what driver is in use ?
Quoted 6 lines
Grr. yes. That would be definitely helpful. I was staring into the wrong one of course.
Quoted 1 line
My card uses the e1000e driver..
Does the patch below fix it?
I'll test you patch in a bit and let you know.
Quoted 33 lines
Thanks,
tglx
8<--------------
drivers/net/ethernet/intel/e1000e/netdev.c +3
-3@@ -6716,19 +6716,19 @@ static irqreturn_t e1000_intr_msix(int _ vector =0 ; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_rx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_tx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_msix_other (msix_irq, netdev);enable_irq (msix_irq); }
Quoted 6 lines
Quoted 3 lines
Does the patch below fix it?
I'll test you patch in a bit and let you know.
It seem to work.
But to be really sure I let the box running with this setup over night.
Quoted 29 lines
Quoted 29 lines
8<--------------
drivers/net/ethernet/intel/e1000e/netdev.c +3
-3@@ -6716,19 +6716,19 @@ static irqreturn_t e1000_intr_msix(int _ vector =0 ; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_rx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_tx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_msix_other (msix_irq, netdev);enable_irq (msix_irq); }
Quoted 11 lines · Gabriel C
Quoted 6 lines
Quoted 3 lines
Does the patch below fix it?
I'll test you patch in a bit and let you know.
It seem to work.
But to be really sure I let the box running with this setup over night.
Also with 4.10.1 + your patch all seems fine..
The box is up 13 hours now and I cannot trigger the BUG()..
Quoted 29 lines
Quoted 29 lines
Quoted 29 lines
8<--------------
drivers/net/ethernet/intel/e1000e/netdev.c +3
-3@@ -6716,19 +6716,19 @@ static irqreturn_t e1000_intr_msix(int _ vector =0 ; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_rx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_intr_msix_tx (msix_irq, netdev);enable_irq (msix_irq); vector++; msix_irq = adapter->msix_entries[vector].vector; -disable_irq (msix_irq); +disable_hardirq (msix_irq);e1000_msix_other (msix_irq, netdev);enable_irq (msix_irq); }