Skip to contentSkip to conversation

PCI compatibility

DISCUSSION Sacha Varma 4 participants 7 messages Jul 19, 2000 – Jul 20, 2000

lore
Share & tools
lore
#0 lore raw

I came across http://til.info.apple.com/techinfo.nsf/artnum/n16365 , a 1994 note which discusses compatibility of PCI cards in general with Macs/OpenFirmware.

It's quite terse but states that PCI cards that need to be active on boot (video cards) will generally not work, and cards that don't generally will.

I'm just curious (I was wondering why there was no support for various nifty non-AGP PC graphics cards, and also why the PC USB card I installed yesterday works fine under MacOS) but

. can anyone point me to more detailed resources?
. what's the state of play 6 years on? is there a trend towards OF compliance? . what does "active on boot" really mean?
. why can't a card be activated after boot, programmatically?
. does anyone maintain a list of compatible PCI cards (of all types)?

Thanks & happy BBQ-ing,

Sacha.

--
sacha varma : system simulation ltd : +44 (0) 20 7836 7406

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#1 lore raw
Quoted 3 lines · Sacha Varma

It's quite terse but states that PCI cards that need to be active on boot (video cards) will generally not work, and cards that don't generally will.

I'm just curious (I was wondering why there was no support for various nifty non-AGP PC graphics cards, and also why the PC USB card I installed yesterday works fine under MacOS) but

Video cards do not need to be active 'on boot' (if you mean upon powerup) to work in linux. If there is no OF rom you will ofcourse not see any display until Linux initializes the display. If you have problems with devices not 'talking' then try enabling IO and MEM access, as they were probably not turned on.

ani

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#2 lore raw

Thanks to all for the responses.

Quoted 6 lines · Ani Joshi
Quoted 3 lines · Sacha Varma

It's quite terse but states that PCI cards that need to be active on boot (video cards) will generally not work, and cards that don't generally will.

Quoted 7 lines
Quoted 3 lines

I'm just curious (I was wondering why there was no support for various nifty non-AGP PC graphics cards, and also why the PC USB card I installed yesterday works fine under MacOS) but

Video cards do not need to be active 'on boot' (if you mean upon powerup) to work in linux. If there is no OF rom you will ofcourse not see any display until Linux initializes the display.

So... does this mean that as far as hardware is concerned there is nothing to prevent me from using any old PCI graphics card in a (non-AGP?) mac so long as linux has drivers for it?

Where in the kernel source is the bit where it initialises the display (is this a per-host-architecture thing, per-video-chipset thing, or a generic PCI thing)?

Quoted 3 lines

If you have problems with
devices not 'talking' then try enabling IO and MEM access, as they were probably not turned on.

As I say, I'm just curious, I'm not having any problems, nor (clearly) do I know much about PCI! But where would one enable these?

--
sacha varma : system simulation ltd : +44 (0) 20 7836 7406

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#3 lore raw
Quoted 1 line · Sacha Varma

So... does this mean that as far as hardware is concerned there is nothing to prevent me from using any old PCI graphics card in a (non-AGP?) mac so long as linux has drivers for it?

Correct, there is nothing preventing any PCI graphics device from working in linux unless there is something extremely fundamentally wrong with it (like relying on PC BIOS too much, but that is very rare)

Quoted 1 line

From personal experience, I have the following "PC" graphics cards working

on my PowerMac: CirrusLogic 5340, Trident Image3D 975, S3 Savage4, S3 Vision968, and a 3dfx banshee. Yes, I'm a video card junkie.

Quoted 3 lines

Where in the kernel source is the bit where it initialises the display (is this a per-host-architecture thing, per-video-chipset thing, or a generic PCI thing)?

you can enable it by: (pdev is the struct pci_dev pointer to your device)

u16 tmp;

pci_read_config_word(pdev, PCI_COMMAND, &tmp);

if (!(tmp & PCI_COMMAND_MEMORY)) {
	tmp |= PCI_COMMAND_MEMORY;
	pci_write_config_word(pdev, PCI_COMMAND, tmp);
}

and same for PCI_COMMAND_IO instead of PCI_COMMAND_MEMORY

you do this before any IO/mem access to the device.

ani

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#4 lore raw
Quoted 8 lines · Ani Joshi
Quoted 1 line · Sacha Varma

So... does this mean that as far as hardware is concerned there is nothing to prevent me from using any old PCI graphics card in a (non-AGP?) mac so long as linux has drivers for it?

Correct, there is nothing preventing any PCI graphics device from working in linux unless there is something extremely fundamentally wrong with it (like relying on PC BIOS too much, but that is very rare)

Or Linux not finding the card because it didn't get an OF device tree node?

Michael

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#5 lore raw
Quoted 9 lines
Quoted 4 lines · Ani Joshi
Quoted 1 line · Sacha Varma

So... does this mean that as far as hardware is concerned there is

nothing to prevent me from using any old PCI graphics card in a (non- AGP?) mac so long as linux has drivers for it?

Quoted 1 line
Quoted 6 lines
Quoted 3 lines

Correct, there is nothing preventing any PCI graphics device from working in linux unless there is something extremely fundamentally wrong with it (like relying on PC BIOS too much, but that is very rare)

Or Linux not finding the card because it didn't get an OF device tree node?

Normally, all PCI cards should get a node. Linux will use normal PCI probing so it can find cards missing in OF, but in this case, I beleive it won't be able to map the interrupt line.

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

#6 lore raw
In reply to Michael Schmitz
Quoted 6 lines · Michael Schmitz
Quoted 3 lines

Correct, there is nothing preventing any PCI graphics device from working in linux unless there is something extremely fundamentally wrong with it (like relying on PC BIOS too much, but that is very rare)

Or Linux not finding the card because it didn't get an OF device tree node?

No, all devices get OF device tree nodes, just not 'real' ones if they don't have an OF rom. Also, relying on OF device tree nodes in video display drivers is not smart because I've noticed in the past that some of the address in the node are off a bit. It is always wiser to use the PCI nodes instead of 'fake' (or even real) OF nodes.

ani

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/