installing on a new PowerBook
I just got one of the brand new Pismo PowerBooks (supposedly identical to the previous generation, but with larger HDs, 20 GB in my case). I haven't been able to boot it at all. Everytime I boot, I get the following kernel output regarding my drive:
hda: IBM-DJSA-220, ATA DISK drive
ide0 at 0x8x01f000-0x8e01f007, 0x8e01f160 on irq 19
hda: Enabling Ultra DMA 4
hda: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63, (U)DMA Partition check:
hda:<7>ohci-control thread code for 0xc06370e0 code at 0xc0167d18
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda1hda: lost interrupt
hda2 hda3hda: lost interrupt
hda4 hda5hda: lost interrupt
hda6 hda7hda: lost interrupt
hda8 hda9hda: lost interrupt
hda10 hda11
RAMDISK: Compressed image found at block 0
EXZT-fs warning: maximal count reached, runing e2fsck is recommended
VFS: Mounted root (ext2 filesystem)
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
<repeats indefinitely>
It finds the bus and the drive, but hangs trying to mount. So, I tried to reinitialize the device map using pdisk. Unfortunately, pdisk run under the MacOS is unable to recognize the device (I type "e /dev/ata2.0" at the command prompt, but it says "pdisk: can't open file '/dev/ata2.0'"). From the get info in MacOS, I know that the hard drive is id 0 on bus 2 of the ata, so that command should be correct. pdisk, however, only recognizes '/dev/ata0.0', which is the internal DVD-ROM drive.
How can I get Linux to recognize the drive? Will downloading the newest dev. kernel from Paul M's site help, or am I stuck? Why doesn't pdisk recongnize my drive?
Alex
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
On Sun, 24 Sep 2000, Alex Vallens wrote:
Dut to the fact that the new Pismo came out after LinuxPPC 2000 there were some updates.
There were in fact some significant changes, so check out
http://www.linuxppc.com/support/updates/product/?catagory=2000&subject=firewire_G3_portable
also instead of there Boot image use mine at:
ftp://ftp.linuxppc.org/users/geiseri/LinuxPPC_Boot.smi.hqx
-ian reinhart geiser
Quoted 46 lines
I just got one of the brand new Pismo PowerBooks (supposedly identical to the previous generation, but with larger HDs, 20 GB in my case). I haven't been able to boot it at all. Everytime I boot, I get the following kernel output regarding my drive:
hda: IBM-DJSA-220, ATA DISK drive
ide0 at 0x8x01f000-0x8e01f007,0x8e01f160on irq 19
hda: Enabling Ultra DMA 4
hda: IBM-DJSA-220, 19077MB w/1874kB Cache, CHS=38760/16/63, (U)DMA Partition check:hda:<7>ohci-control thread code for 0xc06370e0 code at 0xc0167d18hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda1hda: lost interrupt
hda2 hda3hda: lost interrupt
hda4 hda5hda: lost interrupt
hda6 hda7hda: lost interrupt
hda8 hda9hda: lost interrupt
hda10 hda11
RAMDISK: Compressed image found at block 0
EXZT-fs warning: maximal count reached, runing e2fsck is recommended
VFS: Mounted root (ext2 filesystem)hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
hda: lost interrupt
<repeats indefinitely>It finds the bus and the drive, but hangs trying to mount. So, I tried to reinitialize the device map using pdisk. Unfortunately, pdisk run under the MacOS is unable to recognize the device (I type "e
/dev/ata2.0" at the command prompt, but it says "pdisk: can't open file '/dev/ata2.0'"). From the get info in MacOS, I know that the hard drive is id 0 on bus 2 of the ata, so that command should be correct. pdisk, however, only recognizes '/dev/ata0.0', which is the internal DVD-ROM drive.
Quoted 8 lines
How can I get Linux to recognize the drive? Will downloading the newest dev. kernel from Paul M's site help, or am I stuck? Why doesn't pdisk recongnize my drive?
Alex
.---------------------------------------------------.
| Ian Reinhart Geiser - Computer Engineering Student| | HOME: <[email protected]> | | WORK: <[email protected]> | | WEB: http://www.msoe.edu/~geiseri |
`---------------------------------------------------'
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/