Skip to contentSkip to conversation

Indigo2 setup

DISCUSSION Dave Garnier 5 participants 6 messages Oct 19, 2000 MIPS

lore
Share & tools
lore
#0 lore raw

I just picked up an indigo2 with irix6.5 on it, but no install cd's. Is it possible to install mips-linux with out the irix cd's? I would like to wipe the drive clean, and I remember reading that you need the irix boot loader, is this still true? Also is there a how-to, web site with an install guide, or FAQ ?

#1 lore raw
Quoted 5 lines · Dave Garnier

I just picked up an indigo2 with irix6.5 on it, but no install cd's. Is it possible to install mips-linux with out the irix cd's? I would like to wipe the drive clean, and I remember reading that you need the irix boot loader, is this still true? Also is there a how-to, web site with an install guide, or FAQ ?

If i were you i wouldnt simply kill the installation. Get a second harddisk, attach it either internal or external, prepare it for use with linux and finaly swap it with the built in drive on the sled. I recommend an IBM drive (faster and not that noisy).

http://oss.sgi.com/mips/mips-howto.html

(There is even a special indigo2 page somewhere, but i cant memorize the URL right now. I guess Florian can help out.)

Signature · 3 lines
      PGP2 Key-ID: 666/36540865 1997/06/09 <[email protected]>
       GPG Key-ID: 1024D/2E2DAB44 2000-01-30 <[email protected]>
        Geek-Code: GCS b O e+ h
#2 lore raw
In reply to Dave Garnier
Quoted 5 lines · Dave Garnier

I just picked up an indigo2 with irix6.5 on it, but no install cd's. Is it possible to install mips-linux with out the irix cd's? I would like to wipe the drive clean, and I remember reading that you need the irix boot loader, is this still true? Also is there a how-to, web site with an install guide, or FAQ ?

Hi,

I've written a pretty long and complete HOWTO for installing Linux on an Indigo2.
You may read it at http://oss.sgi.com/mips/i2-howto.html . If you have any suggestions or questions you can join us on irc.openprojets.net / #mipslinux or mail me.

HTH, Klaus

Signature · 4 lines
Full Name   : Klaus Naumann     | (http://www.mgnet.de/) (Germany)
Nickname    : Spock             | Org.: Mad Guys Network
Phone / FAX : ++49/177/7862964  | E-Mail: ([email protected])
PGP Key     : www.mgnet.de/keys/key_spock.txt
#3 lore raw
In reply to Dave Garnier

The issue is slightly more complicated than yes or no.

It is possible to install and run linux on an SGI without any Irix assistance at all. But you will be stuck netbooting the kernel from a bootp/tftp server and then mounting the local disk after receiving the kernel from another machine over the network.

If you have the Irix utilities, then it is possible to partition and install the kernel on the hard disk in such a way that linux boots totally off the hard disk without actually requiring Irix to be installed on the disk, but at present you need some Irix utilities to accomplish that. As part of the disk labeling process, the Irix format utility creates a sizeable volume header (a separate partition) into which it dumps a handfull of standalone binary images that can run from the SGI prom. The most important of these is "sash" or Stand Alone SHell. This minimal shell has the capability of reading an elf binary from an EFS or XFS formatted partition and executing it. It's primary purpose in life is to load the kernel "/unix", but it's also used to run certain system repair utilities with the system totally down. You can put an elf kernel into your EFS or XFS partition if you have one and replace /unix with it or change the sash parameters so it loads that instead of /unix.

Secondly, you could instead put the linux kernel into that volume header in place of sash, but you will need a coff kernel image instead of elf as most proms only read coff. That will cause the prom to boot strap the linux kernel itself thinking that it just loaded sash. You then have no need for and EFS or XFS partions at all, but still, you will need some Irix utilities to pull this off as we do not yet have linux versions that I am aware of.

Under Irix, do a man on dvhtool to get info on modifying that volume header. Another cute trick I learned to play was to use fmt to format the disk and elect to make that header really large. I would then stuff both sash and the Irix miniroot off the installation CD in there with the linux kernel. The miniroot would have all the Irix utilities I need for editing the disk, plus I could mount CDs or rcp data over the network to get my linux stuff onto the box.

--

J. Scott Kasten
Email: jsk AT tetracon-eng DOT net

"In most cases, all an argument proves
is that two people were present......"

Quoted 11 lines · Dave Garnier

I just picked up an indigo2 with irix6.5 on it, but no install cd's. Is it possible to install mips-linux with out the irix cd's? I would like to wipe the drive clean, and I remember reading that you need the irix boot loader, is this still true? Also is there a how-to, web site with an install guide, or FAQ ?

#4 lore raw
Quoted 7 lines · J. Scott Kasten

The issue is slightly more complicated than yes or no.

It is possible to install and run linux on an SGI without any Irix assistance at all. But you will be stuck netbooting the kernel from a bootp/tftp server and then mounting the local disk after receiving the kernel from another machine over the network.

Not true anymore. You can partition with a patched fdisk(from Keith) and put the kernel into the volume-header with a patched dvhtool(patch posted a few days ago on this list) + a small kernel-patch to parse the OSLoadPartition prom-variable. See
http://honk.physik.uni-konstanz.de/~agx/mipslinux/dvhtool/
I could only test this on an Indy since I don't have a hd in my I2. On the Indy I put 4 kernels into the volume header and could choose freely between them by using the OSLoader-option in the prom. Regards,
-- Guido

#5 lore raw

I knew some people were working on that, but I must have missed the latest news updates. Thanks for the info.

--

J. Scott Kasten
Email: jsk AT tetracon-eng DOT net

"In most cases, all an argument proves
is that two people were present......"

Quoted 19 lines · Guido Guenther
Quoted 7 lines · J. Scott Kasten

The issue is slightly more complicated than yes or no.

It is possible to install and run linux on an SGI without any Irix assistance at all. But you will be stuck netbooting the kernel from a bootp/tftp server and then mounting the local disk after receiving the kernel from another machine over the network.

Not true anymore. You can partition with a patched fdisk(from Keith) and put the kernel into the volume-header with a patched dvhtool(patch posted a few days ago on this list) + a small kernel-patch to parse the OSLoadPartition prom-variable. See
http://honk.physik.uni-konstanz.de/~agx/mipslinux/dvhtool/
I could only test this on an Indy since I don't have a hd in my I2. On the Indy I put 4 kernels into the volume header and could choose freely between them by using the OSLoader-option in the prom. Regards,
-- Guido