optee: obtain emmc rpmb info from dt
Subsystems (2)
RFC PATCH v2 1/2 optee: obtain emmc rpmb info from dt
From: Igor Opaniuk <[email protected]>
Add support for rpmb-dev property in optee node. Prioritize that provided eMMC info from DT for RPMB operations over the one provided by OP-TEE OS core in RPC calls.
---
Changes in v2:
- Return NULL instead of ERR_PTR(-ENXIO) in get_rpmb_dev in case there is no rpmb-dev property or somemithing went wrong
drivers/tee/optee/core.c | 33 +++++++++++++++++ drivers/tee/optee/optee_private.h | 2 +- drivers/tee/optee/rpmb.c | 60 ++++++++++++++++++------------- 3 files changed, 70 insertions(+), 25 deletions(-)
drivers/tee/optee/core.c +33 -0
@@ -12,6 +12,7 @@#include <linux/arm-smccc.h> #include <linux/err.h> #include <linux/io.h> +#include <mmc.h> #include "optee_smc.h" #include "optee_msg.h"
@@ -607,14 +608,46 @@ static optee_invoke_fn *get_invoke_func(struct udevice *dev)return ERR_PTR (-EINVAL ); } +static struct mmc *get_rpmb_dev (struct udevice *dev) +{ +struct udevice *mmc_dev; +const fdt32_t *phandle_p; +u32 phandle; +int ret =0 ; + +debug ("optee: looking for rpmb device in DT.\n" ); + + phandle_p =ofnode_get_property (dev_ofnode (dev), +"rpmb-dev" ,NULL ); +if (!phandle_p) { +debug ("optee: missing \"rpmb-dev\" property\n" ); +return NULL ; + } + + phandle =fdt32_to_cpu (*phandle_p); + + ret =uclass_get_device_by_phandle_id (UCLASS_MMC , phandle, &mmc_dev); +if (ret) { +printf ("optee: invalid phandle value in \"rpmb-dev\".\n" ); +return NULL ; + } + +debug ("optee: using phandle %d from \"rpmd-dev\" property.\n" , + phandle); +return mmc_get_mmc_dev (mmc_dev); +} +static int optee_of_to_plat (struct udevice *dev) {struct optee_pdata *pdata =dev_get_plat (dev); +struct optee_private *priv =dev_get_priv (dev); pdata->invoke_fn =get_invoke_func (dev);if (IS_ERR (pdata->invoke_fn))return PTR_ERR (pdata->invoke_fn); + priv->rpmb_mmc =get_rpmb_dev (dev); +return 0 ; }
drivers/tee/optee/optee_private.h +1 -1
@@ -19,8 +19,8 @@*/ struct optee_private {struct mmc *rpmb_mmc; -int rpmb_dev_id;int rpmb_original_part; +bool rpmb_inited; };struct optee_msg_arg ;
drivers/tee/optee/rpmb.c +36 -24
91 lines not on this page · raw message
Signature · 1 line
2.25.1
RFC PATCH v2 2/2 doc: device-tree-bindings: optee: support rpmb-dev property
From: Igor Opaniuk <[email protected]>
Add support for "rpmb-dev" property which provides eMMC phandle for RPMB-related operations.
This commit is created only to show DT node updates for RFC patch, obviously that node should be updated in device-tree-bindings in Linux first, that pulled here.
---
Changes v2:
- Add ";" after phandle
doc/device-tree-bindings/firmware/linaro,optee-tz.txt | 3 +++ 1 file changed, 3 insertions(+)
doc/device-tree-bindings/firmware/linaro,optee-tz.txt +3 -0
@@ -20,6 +20,8 @@ the reference implementation maintained by Linaro. "hvc" : HVC #0, with the register assignments specified in drivers/tee/optee/optee_smc.h +- rpmb-dev : contains phandle to the eMMC device, whose RPMB partition + is used for secure storage. Example:
@@ -27,5 +29,6 @@ Example: optee { compatible = "linaro,optee-tz"; method = "smc"; + rpmb-dev = <&mmc0>; }; };
Signature · 1 line
2.25.1
RFC PATCH v2 1/2 optee: obtain emmc rpmb info from dt
In reply to Igor OpaniukHi Igor,
Quoted 37 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add support for rpmb-dev property in optee node. Prioritize that provided eMMC info from DT for RPMB operations over the one provided by OP-TEE OS core in RPC calls.
Signed-off-by Igor Opaniuk <[email protected]>---
Changes in v2:
- Return NULL instead ofERR_PTR(-ENXIO)inget_rpmb_devin case there is no rpmb-dev property or somemithing went wrongdrivers/tee/optee/core.c | 33 +++++++++++++++++ drivers/tee/optee/optee_private.h | 2 +- drivers/tee/optee/rpmb.c | 60 ++++++++++++++++++------------- 3 files changed, 70 insertions(+), 25 deletions(-)drivers/tee/optee/core.c +4
-0@@ -12,6 +12,7 @@#include <linux/arm-smccc.h> #include <linux/err.h> #include <linux/io.h> +#include <mmc.h> #include "optee_smc.h" #include "optee_msg.h" @@ -607,14 +608,46 @@ static optee_invoke_fn *get_invoke_func(struct udevice *dev)return ERR_PTR (-EINVAL ); } +static struct mmc *get_rpmb_dev (struct udevice *dev) +{ +struct udevice *mmc_dev;
drivers/tee/optee/core.c static optee_invoke_fn *get_invoke_func(struct udevice *dev) · line 623
Quoted 10 lines
drivers/tee/optee/core.c +10
-0+const fdt32_t *phandle_p; +u32 phandle; +int ret =0 ; + +debug ("optee: looking for rpmb device in DT.\n" ); + + phandle_p =ofnode_get_property (dev_ofnode (dev), +"rpmb-dev" ,NULL ); +if (!phandle_p) { +debug ("optee: missing \"rpmb-dev\" property\n" );
With this we'll complain in the log each time "rpmb-dev" isn't found even when OP-TEE isn't configured to use RPMB. This might cause some confusion.
Cheers,
Jens
Quoted 143 lines
drivers/tee/optee/core.c +19
-0+return NULL ; + } + + phandle =fdt32_to_cpu (*phandle_p); + + ret =uclass_get_device_by_phandle_id (UCLASS_MMC , phandle, &mmc_dev); +if (ret) { +printf ("optee: invalid phandle value in \"rpmb-dev\".\n" ); +return NULL ; + } + +debug ("optee: using phandle %d from \"rpmd-dev\" property.\n" , + phandle); +return mmc_get_mmc_dev (mmc_dev); +} +static int optee_of_to_plat (struct udevice *dev) {struct optee_pdata *pdata =dev_get_plat (dev); +struct optee_private *priv =dev_get_priv (dev); pdata->invoke_fn =get_invoke_func (dev);if (IS_ERR (pdata->invoke_fn))return PTR_ERR (pdata->invoke_fn); + priv->rpmb_mmc =get_rpmb_dev (dev); +return 0 ; }drivers/tee/optee/optee_private.h +1
-1@@ -19,8 +19,8 @@*/ struct optee_private {struct mmc *rpmb_mmc; -int rpmb_dev_id;int rpmb_original_part; +bool rpmb_inited; };struct optee_msg_arg ;drivers/tee/optee/rpmb.c +36
-24@@ -45,55 +45,67 @@ static void release_mmc(struct optee_private *priv) {int rc; -if (!priv->rpmb_mmc) +if (!priv->rpmb_mmc || !priv->rpmb_inited)return ; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , priv->rpmb_dev_id, - priv->rpmb_original_part); + rc =mmc_switch_part (priv->rpmb_mmc, priv->rpmb_original_part);if (rc)debug ("%s: blk_select_hwpart_devnum() failed: %d\n" , __func__, rc); - priv->rpmb_mmc =NULL ; + priv->rpmb_inited = false; +} + +static int check_mmc (struct mmc *mmc) +{ +if (!mmc) { +debug ("Cannot find RPMB device\n" ); +return -ENODEV ; + } +if (!(mmc->version &MMC_VERSION_MMC )) { +debug ("Device id is not an eMMC device\n" ); +return -ENODEV ; + } +if (mmc->version <MMC_VERSION_4_41 ) { +debug ("RPMB is not supported before version 4.41\n" ); +return -ENODEV ; + } + +return 0 ; }static struct mmc *get_mmc (struct optee_private *priv,int dev_id) { -struct mmc *mmc;int rc; -if (priv->rpmb_mmc && priv->rpmb_dev_id == dev_id) +if (priv->rpmb_mmc && priv->rpmb_inited)return priv->rpmb_mmc;release_mmc (priv); - mmc =find_mmc_device (dev_id); -if (!mmc) { -debug ("Cannot find RPMB device\n" ); -return NULL ; - } -if (!(mmc->version &MMC_VERSION_MMC )) { -debug ("Device id %d is not an eMMC device\n" , dev_id); -return NULL ; - } -if (mmc->version <MMC_VERSION_4_41 ) { -debug ("Device id %d: RPMB not supported before version 4.41\n" , - dev_id); +/* +* Check if priv->rpmb_mmc was already set from DT node, +* otherwise use dev_id provided by OP-TEE OS +* and find mmc device by its dev_id +*/ +if (!priv->rpmb_mmc) + priv->rpmb_mmc =find_mmc_device (dev_id); + + rc =check_mmc (priv->rpmb_mmc); +if (rc)return NULL ; - } - priv->rpmb_original_part =mmc_get_blk_desc (mmc)->hwpart; + priv->rpmb_original_part =mmc_get_blk_desc (priv->rpmb_mmc)->hwpart; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , dev_id,MMC_PART_RPMB ); + rc =mmc_switch_part (priv->rpmb_mmc,MMC_PART_RPMB );if (rc) {debug ("Device id %d: cannot select RPMB partition: %d\n" , dev_id, rc);return NULL ; } - priv->rpmb_mmc = mmc; - priv->rpmb_dev_id = dev_id; -return mmc; + priv->rpmb_inited = true; +return priv->rpmb_mmc; }static u32 rpmb_get_dev_info (u16 dev_id,struct rpmb_dev_info *info)Signature · 1 line
2.25.1
RFC PATCH v2 1/2 optee: obtain emmc rpmb info from dt
Hi Jens,
Quoted 47 lines · Jens Wiklander
Hi Igor,
Quoted 43 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add support for rpmb-dev property in optee node. Prioritize that provided eMMC info from DT for RPMB operations over the one provided by OP-TEE OS core in RPC calls.
Signed-off-by Igor Opaniuk <[email protected]>---
Changes in v2:
- Return NULL instead ofERR_PTR(-ENXIO)inget_rpmb_devin case there is no rpmb-dev property or somemithing went wrongdrivers/tee/optee/core.c | 33 +++++++++++++++++ drivers/tee/optee/optee_private.h | 2 +- drivers/tee/optee/rpmb.c | 60 ++++++++++++++++++------------- 3 files changed, 70 insertions(+), 25 deletions(-)drivers/tee/optee/core.c +10
-0@@ -12,6 +12,7 @@#include <linux/arm-smccc.h> #include <linux/err.h> #include <linux/io.h> +#include <mmc.h> #include "optee_smc.h" #include "optee_msg.h" @@ -607,14 +608,46 @@ static optee_invoke_fn *get_invoke_func(struct udevice *dev)return ERR_PTR (-EINVAL ); } +static struct mmc *get_rpmb_dev (struct udevice *dev) +{ +struct udevice *mmc_dev; +const fdt32_t *phandle_p; +u32 phandle; +int ret =0 ; + +debug ("optee: looking for rpmb device in DT.\n" ); +
Quoted 8 lines
drivers/tee/optee/core.c static optee_invoke_fn *get_invoke_func(struct udevice *dev) · line 623
Quoted 4 lines
drivers/tee/optee/core.c +4
-0+ phandle_p =ofnode_get_property (dev_ofnode (dev), +"rpmb-dev" ,NULL ); +if (!phandle_p) { +debug ("optee: missing \"rpmb-dev\" property\n" );With this we'll complain in the log each time "rpmb-dev" isn't found even when OP-TEE isn't configured to use RPMB. This might cause some confusion.
Sure I'll wrap with "if (IS_ENABLED(CONFIG_SUPPORT_EMMC_RPMB))" get_rpmb_dev() invocation in optee_of_to_plat() .
But as it's just a debug message, I would prefer to keep it for debugging purposes
(I can adjust it, adding the phrase that the driver will use OP-TEE provided dev id instead).
Quoted 146 lines
Cheers,
JensQuoted 143 lines
drivers/tee/optee/core.c +19
-0+return NULL ; + } + + phandle =fdt32_to_cpu (*phandle_p); + + ret =uclass_get_device_by_phandle_id (UCLASS_MMC , phandle, &mmc_dev); +if (ret) { +printf ("optee: invalid phandle value in \"rpmb-dev\".\n" ); +return NULL ; + } + +debug ("optee: using phandle %d from \"rpmd-dev\" property.\n" , + phandle); +return mmc_get_mmc_dev (mmc_dev); +} +static int optee_of_to_plat (struct udevice *dev) {struct optee_pdata *pdata =dev_get_plat (dev); +struct optee_private *priv =dev_get_priv (dev); pdata->invoke_fn =get_invoke_func (dev);if (IS_ERR (pdata->invoke_fn))return PTR_ERR (pdata->invoke_fn); + priv->rpmb_mmc =get_rpmb_dev (dev); +return 0 ; }drivers/tee/optee/optee_private.h +1
-1@@ -19,8 +19,8 @@*/ struct optee_private {struct mmc *rpmb_mmc; -int rpmb_dev_id;int rpmb_original_part; +bool rpmb_inited; };struct optee_msg_arg ;drivers/tee/optee/rpmb.c +36
-25@@ -45,55 +45,67 @@ static void release_mmc(struct optee_private *priv) {int rc; -if (!priv->rpmb_mmc) +if (!priv->rpmb_mmc || !priv->rpmb_inited)return ; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , priv->rpmb_dev_id, - priv->rpmb_original_part); + rc =mmc_switch_part (priv->rpmb_mmc, priv->rpmb_original_part);if (rc)debug ("%s: blk_select_hwpart_devnum() failed: %d\n" , __func__, rc); - priv->rpmb_mmc =NULL ; + priv->rpmb_inited = false; +} + +static int check_mmc (struct mmc *mmc) +{ +if (!mmc) { +debug ("Cannot find RPMB device\n" ); +return -ENODEV ; + } +if (!(mmc->version &MMC_VERSION_MMC )) { +debug ("Device id is not an eMMC device\n" ); +return -ENODEV ; + } +if (mmc->version <MMC_VERSION_4_41 ) { +debug ("RPMB is not supported before version 4.41\n" ); +return -ENODEV ; + } + +return 0 ; }static struct mmc *get_mmc (struct optee_private *priv,int dev_id) { -struct mmc *mmc;int rc; -if (priv->rpmb_mmc && priv->rpmb_dev_id == dev_id) +if (priv->rpmb_mmc && priv->rpmb_inited)return priv->rpmb_mmc;release_mmc (priv); - mmc =find_mmc_device (dev_id); -if (!mmc) { -debug ("Cannot find RPMB device\n" ); -return NULL ; - } -if (!(mmc->version &MMC_VERSION_MMC )) { -debug ("Device id %d is not an eMMC device\n" , dev_id); -return NULL ; - } -if (mmc->version <MMC_VERSION_4_41 ) { -debug ("Device id %d: RPMB not supported before version 4.41\n" , - dev_id); +/* +* Check if priv->rpmb_mmc was already set from DT node, +* otherwise use dev_id provided by OP-TEE OS +* and find mmc device by its dev_id +*/ +if (!priv->rpmb_mmc) + priv->rpmb_mmc =find_mmc_device (dev_id); + + rc =check_mmc (priv->rpmb_mmc); +if (rc)return NULL ; - } - priv->rpmb_original_part =mmc_get_blk_desc (mmc)->hwpart; + priv->rpmb_original_part =mmc_get_blk_desc (priv->rpmb_mmc)->hwpart; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , dev_id,MMC_PART_RPMB ); + rc =mmc_switch_part (priv->rpmb_mmc,MMC_PART_RPMB );if (rc) {debug ("Device id %d: cannot select RPMB partition: %d\n" , dev_id, rc);return NULL ; } - priv->rpmb_mmc = mmc; - priv->rpmb_dev_id = dev_id; -return mmc; + priv->rpmb_inited = true; +return priv->rpmb_mmc; }static u32 rpmb_get_dev_info (u16 dev_id,struct rpmb_dev_info *info) --2.25.1
Signature · 7 lines
Best regards - Freundliche Gr?sse - Meilleures salutations Igor Opaniuk Embedded Software Engineer T: +380 938364067 E: igor.opaniuk at foundries.io W: www.foundries.io
RFC PATCH v2 1/2 optee: obtain emmc rpmb info from dt
Quoted 61 lines · Igor Opaniuk
Hi Jens,
Quoted 47 lines · Jens Wiklander
Hi Igor,
Quoted 43 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add support for rpmb-dev property in optee node. Prioritize that provided eMMC info from DT for RPMB operations over the one provided by OP-TEE OS core in RPC calls.
Signed-off-by Igor Opaniuk <[email protected]>---
Changes in v2:
- Return NULL instead ofERR_PTR(-ENXIO)inget_rpmb_devin case there is no rpmb-dev property or somemithing went wrongdrivers/tee/optee/core.c | 33 +++++++++++++++++ drivers/tee/optee/optee_private.h | 2 +- drivers/tee/optee/rpmb.c | 60 ++++++++++++++++++------------- 3 files changed, 70 insertions(+), 25 deletions(-)drivers/tee/optee/core.c +10
-0@@ -12,6 +12,7 @@#include <linux/arm-smccc.h> #include <linux/err.h> #include <linux/io.h> +#include <mmc.h> #include "optee_smc.h" #include "optee_msg.h" @@ -607,14 +608,46 @@ static optee_invoke_fn *get_invoke_func(struct udevice *dev)return ERR_PTR (-EINVAL ); } +static struct mmc *get_rpmb_dev (struct udevice *dev) +{ +struct udevice *mmc_dev; +const fdt32_t *phandle_p; +u32 phandle; +int ret =0 ; + +debug ("optee: looking for rpmb device in DT.\n" ); +Quoted 8 lines
drivers/tee/optee/core.c static optee_invoke_fn *get_invoke_func(struct udevice *dev) · line 623
Quoted 4 lines
drivers/tee/optee/core.c +4
-0+ phandle_p =ofnode_get_property (dev_ofnode (dev), +"rpmb-dev" ,NULL ); +if (!phandle_p) { +debug ("optee: missing \"rpmb-dev\" property\n" );With this we'll complain in the log each time "rpmb-dev" isn't found even when OP-TEE isn't configured to use RPMB. This might cause some confusion.
Quoted 7 lines
Sure I'll wrap with "if (
IS_ENABLED(CONFIG_SUPPORT_EMMC_RPMB))"get_rpmb_dev()invocation inoptee_of_to_plat().But as it's just a debug message, I would prefer to keep it for debugging purposes
(I can adjust it, adding the phrase that the driver will use OP-TEE provided dev id instead).
Sounds good.
Cheers,
Jens
RFC PATCH v2 1/2 optee: obtain emmc rpmb info from dt
In reply to Igor OpaniukHi Igor,
Quoted 62 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add support for rpmb-dev property in optee node. Prioritize that provided eMMC info from DT for RPMB operations over the one provided by OP-TEE OS core in RPC calls.
Signed-off-by Igor Opaniuk <[email protected]>---
Changes in v2:
- Return NULL instead ofERR_PTR(-ENXIO)inget_rpmb_devin case there is no rpmb-dev property or somemithing went wrongdrivers/tee/optee/core.c | 33 +++++++++++++++++ drivers/tee/optee/optee_private.h | 2 +- drivers/tee/optee/rpmb.c | 60 ++++++++++++++++++------------- 3 files changed, 70 insertions(+), 25 deletions(-)drivers/tee/optee/core.c +29
-0@@ -12,6 +12,7 @@#include <linux/arm-smccc.h> #include <linux/err.h> #include <linux/io.h> +#include <mmc.h> #include "optee_smc.h" #include "optee_msg.h" @@ -607,14 +608,46 @@ static optee_invoke_fn *get_invoke_func(struct udevice *dev)return ERR_PTR (-EINVAL ); } +static struct mmc *get_rpmb_dev (struct udevice *dev) +{ +struct udevice *mmc_dev; +const fdt32_t *phandle_p; +u32 phandle; +int ret =0 ; + +debug ("optee: looking for rpmb device in DT.\n" ); + + phandle_p =ofnode_get_property (dev_ofnode (dev), +"rpmb-dev" ,NULL ); +if (!phandle_p) { +debug ("optee: missing \"rpmb-dev\" property\n" ); +return NULL ; + } + + phandle =fdt32_to_cpu (*phandle_p); + + ret =uclass_get_device_by_phandle_id (UCLASS_MMC , phandle, &mmc_dev); +if (ret) { +printf ("optee: invalid phandle value in \"rpmb-dev\".\n" ); +return NULL ; + } + +debug ("optee: using phandle %d from \"rpmd-dev\" property.\n" , + phandle); +return mmc_get_mmc_dev (mmc_dev); +}
drivers/tee/optee/core.c static optee_invoke_fn *get_invoke_func(struct udevice *dev) · line 648
Quoted 10 lines
drivers/tee/optee/core.c +2
-0+static int optee_of_to_plat (struct udevice *dev) {struct optee_pdata *pdata =dev_get_plat (dev); +struct optee_private *priv =dev_get_priv (dev); pdata->invoke_fn =get_invoke_func (dev);if (IS_ERR (pdata->invoke_fn))return PTR_ERR (pdata->invoke_fn);
Normally optee_of_to_plat should initialized only the platdata and not the private date (initialized during probe or driver execution)
And no need to initialize rpmb_mmcif CONFIG_CMD_OPTEE_RPMBI is not activated,
I proposed:
struct optee_pdata {
??? optee_invoke_fn *invoke_fn;
??? struct mmc *rpmb_mmc;
};
+ if (IS_ENABLED(CONFIG_CMD_OPTEE_RPMBI))
+??? pdata->rpmb_mmc = get_rpmb_dev(dev);
Quoted 60 lines
drivers/tee/optee/core.c +2
-0+ priv->rpmb_mmc =get_rpmb_dev (dev); +return 0 ; }drivers/tee/optee/optee_private.h +1
-1@@ -19,8 +19,8 @@*/ struct optee_private {struct mmc *rpmb_mmc; -int rpmb_dev_id;int rpmb_original_part; +bool rpmb_inited; };struct optee_msg_arg ;drivers/tee/optee/rpmb.c +21
-4@@ -45,55 +45,67 @@ static void release_mmc(struct optee_private *priv) {int rc; -if (!priv->rpmb_mmc) +if (!priv->rpmb_mmc || !priv->rpmb_inited)return ; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , priv->rpmb_dev_id, - priv->rpmb_original_part); + rc =mmc_switch_part (priv->rpmb_mmc, priv->rpmb_original_part);if (rc)debug ("%s: blk_select_hwpart_devnum() failed: %d\n" , __func__, rc); - priv->rpmb_mmc =NULL ; + priv->rpmb_inited = false; +} + +static int check_mmc (struct mmc *mmc) +{ +if (!mmc) { +debug ("Cannot find RPMB device\n" ); +return -ENODEV ; + } +if (!(mmc->version &MMC_VERSION_MMC )) { +debug ("Device id is not an eMMC device\n" ); +return -ENODEV ; + } +if (mmc->version <MMC_VERSION_4_41 ) { +debug ("RPMB is not supported before version 4.41\n" ); +return -ENODEV ; + } + +return 0 ; }
drivers/tee/optee/rpmb.c static void release_mmc(struct optee_private *priv) · line 84
Quoted 10 lines
drivers/tee/optee/rpmb.c +1
-2static struct mmc *get_mmc (struct optee_private *priv,int dev_id) { -struct mmc *mmc;int rc; -if (priv->rpmb_mmc && priv->rpmb_dev_id == dev_id) +if (priv->rpmb_mmc && priv->rpmb_inited)return priv->rpmb_mmc;release_mmc (priv);
really need to release mmc here (it is not initialized) as the first test of
the called function is:
??? if (!priv->rpmb_mmc || !priv->rpmb_inited)
Quoted 10 lines
drivers/tee/optee/rpmb.c +0
-9- mmc =find_mmc_device (dev_id); -if (!mmc) { -debug ("Cannot find RPMB device\n" ); -return NULL ; - } -if (!(mmc->version &MMC_VERSION_MMC )) { -debug ("Device id %d is not an eMMC device\n" , dev_id); -return NULL ; - }
drivers/tee/optee/rpmb.c static void release_mmc(struct optee_private *priv) · line 92
Quoted 10 lines
drivers/tee/optee/rpmb.c +7
-3-if (mmc->version <MMC_VERSION_4_41 ) { -debug ("Device id %d: RPMB not supported before version 4.41\n" , - dev_id); +/* +* Check if priv->rpmb_mmc was already set from DT node, +* otherwise use dev_id provided by OP-TEE OS +* and find mmc device by its dev_id +*/ +if (!priv->rpmb_mmc) + priv->rpmb_mmc =find_mmc_device (dev_id);
if (plat->rpmb_mmc)
priv->rpmb_mmc = plat->rpmb_mmc else priv->rpmb_mmc = find_mmc_device(dev_id);
and priv->rpmb_inited is nore more required (if priv->rpmb_mmc = NULL; on each error)
Quoted 15 lines
drivers/tee/optee/rpmb.c +5
-3+ + rc =check_mmc (priv->rpmb_mmc); +if (rc)return NULL ; - } - priv->rpmb_original_part =mmc_get_blk_desc (mmc)->hwpart; + priv->rpmb_original_part =mmc_get_blk_desc (priv->rpmb_mmc)->hwpart; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , dev_id,MMC_PART_RPMB ); + rc =mmc_switch_part (priv->rpmb_mmc,MMC_PART_RPMB );if (rc) {debug ("Device id %d: cannot select RPMB partition: %d\n" , dev_id, rc);return NULL ;
drivers/tee/optee/rpmb.c static void release_mmc(struct optee_private *priv) · line 111
Quoted 10 lines
drivers/tee/optee/rpmb.c +2
-3} - priv->rpmb_mmc = mmc; - priv->rpmb_dev_id = dev_id; -return mmc; + priv->rpmb_inited = true; +return priv->rpmb_mmc; }static u32 rpmb_get_dev_info (u16 dev_id,struct rpmb_dev_info *info)
regards
Patrick
RFC PATCH v2 1/2 optee: obtain emmc rpmb info from dt
Hi Patrick,
Quoted 72 lines · Patrick DELAUNAY
Hi Igor,
Quoted 68 lines · Igor Opaniuk
From: Igor Opaniuk <[email protected]>
Add support for rpmb-dev property in optee node. Prioritize that provided eMMC info from DT for RPMB operations over the one provided by OP-TEE OS core in RPC calls.
Signed-off-by Igor Opaniuk <[email protected]>---
Changes in v2:
- Return NULL instead ofERR_PTR(-ENXIO)inget_rpmb_devin case there is no rpmb-dev property or somemithing went wrongdrivers/tee/optee/core.c | 33 +++++++++++++++++ drivers/tee/optee/optee_private.h | 2 +- drivers/tee/optee/rpmb.c | 60 ++++++++++++++++++------------- 3 files changed, 70 insertions(+), 25 deletions(-)drivers/tee/optee/core.c +31
-0@@ -12,6 +12,7 @@#include <linux/arm-smccc.h> #include <linux/err.h> #include <linux/io.h> +#include <mmc.h> #include "optee_smc.h" #include "optee_msg.h" @@ -607,14 +608,46 @@ static optee_invoke_fn *get_invoke_func(struct udevice *dev)return ERR_PTR (-EINVAL ); } +static struct mmc *get_rpmb_dev (struct udevice *dev) +{ +struct udevice *mmc_dev; +const fdt32_t *phandle_p; +u32 phandle; +int ret =0 ; + +debug ("optee: looking for rpmb device in DT.\n" ); + + phandle_p =ofnode_get_property (dev_ofnode (dev), +"rpmb-dev" ,NULL ); +if (!phandle_p) { +debug ("optee: missing \"rpmb-dev\" property\n" ); +return NULL ; + } + + phandle =fdt32_to_cpu (*phandle_p); + + ret =uclass_get_device_by_phandle_id (UCLASS_MMC , phandle, &mmc_dev); +if (ret) { +printf ("optee: invalid phandle value in \"rpmb-dev\".\n" ); +return NULL ; + } + +debug ("optee: using phandle %d from \"rpmd-dev\" property.\n" , + phandle); +return mmc_get_mmc_dev (mmc_dev); +} +static int optee_of_to_plat (struct udevice *dev) {struct optee_pdata *pdata =dev_get_plat (dev); +struct optee_private *priv =dev_get_priv (dev);
Quoted 7 lines
drivers/tee/optee/core.c static optee_invoke_fn *get_invoke_func(struct udevice *dev) · line 648
Quoted 4 lines
drivers/tee/optee/core.c +0
-0pdata->invoke_fn =get_invoke_func (dev);if (IS_ERR (pdata->invoke_fn))return PTR_ERR (pdata->invoke_fn);Normally
optee_of_to_platshould initialized only the platdata and not the private date (initialized during probe or driver execution)
To be honest that was my initial intention to do that way,
but that would have required a complete overhaul of all functions in optee/rpmb.c,
so I just tried to find a "golden mean" between the approach you described and something less intrusive.
Quoted 2 lines
And no need to initialize
rpmb_mmcifCONFIG_CMD_OPTEE_RPMBIis not activated,
Yeah, will fix that.
Quoted 146 lines
I proposed:
struct optee_pdata { optee_invoke_fn *invoke_fn; struct mmc *rpmb_mmc; };+ if (
IS_ENABLED(CONFIG_CMD_OPTEE_RPMBI))+
pdata->rpmb_mmc=get_rpmb_dev(dev);Quoted 60 lines
drivers/tee/optee/core.c +2
-0+ priv->rpmb_mmc =get_rpmb_dev (dev); +return 0 ; }drivers/tee/optee/optee_private.h +1
-1@@ -19,8 +19,8 @@*/ struct optee_private {struct mmc *rpmb_mmc; -int rpmb_dev_id;int rpmb_original_part; +bool rpmb_inited; };struct optee_msg_arg ;drivers/tee/optee/rpmb.c +21
-4@@ -45,55 +45,67 @@ static void release_mmc(struct optee_private *priv) {int rc; -if (!priv->rpmb_mmc) +if (!priv->rpmb_mmc || !priv->rpmb_inited)return ; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , priv->rpmb_dev_id, - priv->rpmb_original_part); + rc =mmc_switch_part (priv->rpmb_mmc, priv->rpmb_original_part);if (rc)debug ("%s: blk_select_hwpart_devnum() failed: %d\n" , __func__, rc); - priv->rpmb_mmc =NULL ; + priv->rpmb_inited = false; +} + +static int check_mmc (struct mmc *mmc) +{ +if (!mmc) { +debug ("Cannot find RPMB device\n" ); +return -ENODEV ; + } +if (!(mmc->version &MMC_VERSION_MMC )) { +debug ("Device id is not an eMMC device\n" ); +return -ENODEV ; + } +if (mmc->version <MMC_VERSION_4_41 ) { +debug ("RPMB is not supported before version 4.41\n" ); +return -ENODEV ; + } + +return 0 ; }drivers/tee/optee/rpmb.c static void release_mmc(struct optee_private *priv) · line 84
Quoted 10 lines
drivers/tee/optee/rpmb.c +1
-2static struct mmc *get_mmc (struct optee_private *priv,int dev_id) { -struct mmc *mmc;int rc; -if (priv->rpmb_mmc && priv->rpmb_dev_id == dev_id) +if (priv->rpmb_mmc && priv->rpmb_inited)return priv->rpmb_mmc;release_mmc (priv);really need to release mmc here (it is not initialized) as the first test of
the called function is:
if (!priv->rpmb_mmc || !priv->rpmb_inited)Quoted 10 lines
drivers/tee/optee/rpmb.c +0
-9- mmc =find_mmc_device (dev_id); -if (!mmc) { -debug ("Cannot find RPMB device\n" ); -return NULL ; - } -if (!(mmc->version &MMC_VERSION_MMC )) { -debug ("Device id %d is not an eMMC device\n" , dev_id); -return NULL ; - }drivers/tee/optee/rpmb.c static void release_mmc(struct optee_private *priv) · line 92
Quoted 10 lines
drivers/tee/optee/rpmb.c +7
-3-if (mmc->version <MMC_VERSION_4_41 ) { -debug ("Device id %d: RPMB not supported before version 4.41\n" , - dev_id); +/* +* Check if priv->rpmb_mmc was already set from DT node, +* otherwise use dev_id provided by OP-TEE OS +* and find mmc device by its dev_id +*/ +if (!priv->rpmb_mmc) + priv->rpmb_mmc =find_mmc_device (dev_id);if (
plat->rpmb_mmc)priv->rpmb_mmc = plat->rpmb_mmc else priv->rpmb_mmc = find_mmc_device(dev_id);and
priv->rpmb_initedis nore more required (ifpriv->rpmb_mmc= NULL; on each error)Quoted 24 lines
drivers/tee/optee/rpmb.c +7
-6+ + rc =check_mmc (priv->rpmb_mmc); +if (rc)return NULL ; - } - priv->rpmb_original_part =mmc_get_blk_desc (mmc)->hwpart; + priv->rpmb_original_part =mmc_get_blk_desc (priv->rpmb_mmc)->hwpart; - rc =blk_select_hwpart_devnum (IF_TYPE_MMC , dev_id,MMC_PART_RPMB ); + rc =mmc_switch_part (priv->rpmb_mmc,MMC_PART_RPMB );if (rc) {debug ("Device id %d: cannot select RPMB partition: %d\n" , dev_id, rc);return NULL ; } - priv->rpmb_mmc = mmc; - priv->rpmb_dev_id = dev_id; -return mmc; + priv->rpmb_inited = true; +return priv->rpmb_mmc; }
Quoted 8 lines
drivers/tee/optee/rpmb.c static void release_mmc(struct optee_private *priv) · line 111
Quoted 1 line
drivers/tee/optee/rpmb.c +0
-0static u32 rpmb_get_dev_info (u16 dev_id,struct rpmb_dev_info *info)regards
Patrick
The principal problem here is a new "rpmb-dev" property for optee DT node which I introduced
in this patch set. As in Linux all RPMB RPC calls are handled by tee supplicant running
in user space, unlikely I can somehow justify why we need that additional property
if it is not going to be used by optee linux kernel driver.
We can still have a temporary approach with u-boot-specific property (something like u-boot,rpmb-dev in u-boot specific dtsi), but that will create additional fragmentation and divergence between U-Boot/Linux, which I want to avoid. So I'm still thinking about what could be a better solution here.
For additional details please check [1]
[1] https://github.com/OP-TEE/optee_os/issues/4343
Signature · 7 lines
Best regards - Freundliche Gr?sse - Meilleures salutations Igor Opaniuk Embedded Software Engineer T: +380 938364067 E: igor.opaniuk at foundries.io W: www.foundries.io